The Quantum Measurement Stack (QMS) is an open-source research and software framework for studying what can be inferred about a physical or quantum system from what its detector and measurement architecture make observable. This technical note documents the QMS v0.4.0 Three-Twin Architecture comprising a finite two-mode Gaussian Quantum Twin for observability, reconstruction, estimation and adaptation; a Detector Twin for residual analysis, stage-wise divergence, inverse calibration and mechanism ranking; and a Measurement Twin for causal prediction, innovation analysis, frozen calibration and experimental measurement-state monitoring. Current evidence includes controlled computational validation, same-forward-model CTI parameter recovery using the Pyxel detector-simulation framework, and causal-replay analysis of archival University of Glasgow single-photon experimental measurements. The current evidence does not establish quantum-field reconstruction, general quantum-state tomography, independently validated real-detector calibration, detector-health diagnosis, physical fault attribution, statistically independent physical-event discovery, or prospective experimental validation. The next major milestone is blind external validation using independently configured simulations and held-out experimental measurements.
The Quantum Measurement Stack (QMS) is an open-source research and software framework for studying what can be inferred about a physical or quantum system from what its detector and measurement architecture make observable. This technical note documents the QMS v0.4.0 Three-Twin Architecture comprising a finite two-mode Gaussian Quantum Twin for observability, reconstruction, estimation and adaptation; a Detector Twin for residual analysis, stage-wise divergence, inverse calibration and mechanism ranking; and a Measurement Twin for causal prediction, innovation analysis, frozen calibration and experimental measurement-state monitoring. Current evidence includes controlled computational validation, same-forward-model CTI parameter recovery using the Pyxel detector-simulation framework, and causal-replay analysis of archival University of Glasgow single-photon experimental measurements. The current evidence does not establish quantum-field reconstruction, general quantum-state tomography, independently validated real-detector calibration, detector-health diagnosis, physical fault attribution, statistically independent physical-event discovery, or prospective experimental validation. The next major milestone is blind external validation using independently configured simulations and held-out experimental measurements.
QMS Platform is a quantum measurement observability and reconstruction-assurance framework developed to assess whether conclusions drawn from quantum measurement data are supported by the available measurement configuration and reconstruction process. Initial validation is performed using two-qubit photonic tomography. The work evaluates measurement-context normalization, linear state reconstruction, controlled count and background degradation, physical-state projection, maximum-likelihood reconstruction, measurement-context criticality, state-dependent observability, null-space information loss, random-state validation, and the decomposition of structural observability loss from noise propagation. The results establish an initial computational validation baseline while explicitly distinguishing current evidence from broader claims of detector or hardware generality.
This handout provides a concise overview of the Detector-Plane Causality framework for quantum measurement. The framework introduces the Quantum Measurement Stack (QMS), a causally ordered instrumentation model that represents a quantum experiment as a structured measurement pipeline. Within this model, the detector plane defines the effective measurement boundary and includes the detector material, analog front-end electronics, digitization hardware, firmware, and signal analysis software. Correlations lost at this stage are irreversibly removed from the measurement process and cannot be recovered through later data processing. The handout also summarizes QMCTB-01, a detector-plane benchmark designed to evaluate how detector systems preserve or discard coherence in interference experiments such as the double-slit configuration. This document serves as a compact conceptual and instrumentation overview of the framework and its benchmark for researchers working in quantum optics, detector instrumentation, and quantum measurement systems
Detector-Plane Causality in Quantum Measurement: A Benchmark Framework for Measurement Integrity and Control This work introduces an instrumentation-level framework for analyzing quantum measurement systems by explicitly localizing irreversible information loss at the detector plane. The detector plane is defined as the combined system consisting of detector materials, front-end electronics, digitization hardware, firmware, and software reconstruction that transform physical detection events into recorded measurement data. The paper proposes the Quantum Measurement Stack (QMS), a causally ordered abstraction that decomposes quantum experiments into operational layers: Field excitation and imprint formation Detector-plane imaging Data acquisition (DAQ) integrity Quantum diagnostics Quantum control system (QCS) Within this framework, the detector plane acts as the effective measurement boundary where correlations can be irreversibly preserved or discarded. To operationalize this concept, the work introduces QMCTB-01, a detector-plane causality benchmark based on a near-field double-slit configuration. The benchmark evaluates two detector regimes under identical photon statistics and propagation conditions: Intensity-only detection, where phase correlations are discarded at the detector plane. Correlation-preserving detection, where phase information is retained through the detector pipeline. Wave-optics simulations demonstrate that interference visibility is determined by detector-plane coherence preservation, not by statistical accumulation of detection events. When correlations are discarded at the detector plane, interference fringes cannot be recovered through averaging, filtering, or post-processing, consistent with established limits of digital signal processing and information theory. The results establish detector-plane coherence fidelity as a measurable instrumentation property and provide a practical benchmark for evaluating detector systems across quantum optics, solid-state detectors, and hybrid quantum platforms. This work frames quantum interference experiments as an instrumentation and signal-processing problem, providing a reproducible methodology for diagnosing detector-induced coherence loss and for designing measurement pipelines that preserve physically relevant correlations. Simulation code and benchmark artifacts supporting this work are available through the associated repository.
Overview This record presents a two-poster set introducing the Quantum Measurement Stack (QMS), a detector-plane–centered framework describing how observed reality emerges from physical measurement systems. Released together as a single unit, the posters provide both a conceptual overview and a visual explanation of the framework. Poster A — Quantum Measurement Stack - Framework (Navigation Poster) This poster serves as an entry point into the framework, connecting its three core components: Imprint Hypothesis — particles as primary excitations; wave-like behavior as interaction-derived coherence imprints Detector-Plane Imaging (DPI) — coherence structure exists prior to detection and determines observable outcomes Quantum Measurement & Control Test Bench — measurement as a structured system with detector-plane–localized information loss Related Works Imprint Hypothesis - https://zenodo.org/records/18994419 Detector Plane Imaging - https://zenodo.org/records/19105059 Quantum Measurement & Control Test Bench - https://zenodo.org/records/18075090 Poster B — Quantum Measurement Stack - Observed Reality (Master Poster) This poster presents the core mechanism of the framework as a visual model. Core Idea Same input → different detector → different observed reality A single underlying coherence structure produces different observable patterns depending on detector behavior: Interference (double-band / fringes):Appears when phase correlations are preserved, revealing structured coherence Intensity-only distribution:Appears when phase information is not retained, resulting in no stable interference These outcomes arise from detector-plane selection, where measurement systems determine which correlations are preserved and which are irreversibly lost. Code & Implementation https://github.com/srikarr20/detector-plane-imaging https://github.com/srikarr20/quantum-measurement-stack Release Note These posters are released together as a single visual introduction to the Quantum Measurement Stack, combining framework and conceptual explanation - observed reality.
Machine learning (ML) is increasingly embedded across quantum-sensing systems, yet the evidence remains fragmented across platforms, algorithms, and validation settings. This survey develops an integrated framework that organizes ML contributions into four coupled functions: preparation, measurement, inference, and control. It compares atomic, photonic, solid-state, superconducting, mechanical, and hybrid sensors using common criteria: physical bottleneck, data provenance, metrological objective, validation level, robustness, and deployment constraints. The analysis links recurring sensing structures to suitable learning paradigms and distinguishes improvements in quantum-resource preparation, information acquisition, parameter estimation, and system-level operation. Across the literature, inference has the broadest experimental coverage, while direct demonstrations also establish ML-assisted cold-atom preparation, adaptive measurement, and protocols coupling resource generation with online estimation. By contrast, evidence for sustained closed-loop control and autonomy remains device-specific, making stability, uncertainty calibration, transfer, latency, safety, and recovery central research priorities. Crucially, ML may reduce estimator risk, calibration burden, or operating cost, but it cannot recover information absent from a fixed measurement record. The resulting taxonomy and resource-matched attribution framework provide a consistent basis for comparing reported gains and designing reliable, transferable, and experimentally verifiable ML-enabled quantum sensors.
This project introduces a computational framework for quantum trajectory reconstruction using weak measurements and probabilistic inference. In standard quantum mechanics, physical systems are described by a wavefunction, and observable quantities are inherently probabilistic. As a result, particle trajectories are not directly accessible. This work proposes an operational approach in which trajectories are treated as latent variables inferred from noisy measurement data. The framework combines three core components: A numerical solver for the time-dependent Schrödinger equation (using FFT-based split-operator methods) A weak measurement model that simulates continuous, noisy observations of the system Inference engines, including Sequential Monte Carlo (particle filtering) and recurrent neural networks, to reconstruct the most probable trajectory The central idea is to reformulate quantum dynamics as an inference problem over hidden states, where the goal is to estimate the trajectory that best explains the observed measurements. This approach does not violate the principles of quantum mechanics, including the Principe d'incertitude de Heisenberg, but instead provides a new computational lens through which quantum systems can be analyzed. Potential applications include: Quantum sensing and metrology Quantum control and error correction Hybrid AI-quantum systems Advanced simulation of open quantum systems The project is fully reproducible and open-source, with modular architecture designed for research extensibility.