Quantum noise sources exhibit true randomness, ensuring secure random numbers than classical noise sources. Optical quantum random number generators (QRNGs) exploit a wide range of quantum phenomena, making them a suitable candidate for harnessing randomness. Among these, phase fluctuation based optical QRNGs are particularly popular owing to their straightforward approach. Conventional phase fluctuation QRNGs rely on translation of phase fluctuation to amplitude variation to produce randomness. Contemporary phase fluctuation QRNGs have also demonstrated simultaneous dual quadrature measurement methods, enabling phase measurements between quadrature components. In comparison to former conventional methods, phase measurement between quadratures intrinsically has improved quantum to classical noise properties. However, such phase measurements employ digital sampling prior to digital phase measurement which in turn gives rise to unintended deterministic fractal noise patterns in the probability distribution. Digital sampling due to its inherent amplitude quantization results in varying density of the measurable phase noise levels leading to deterministic fractal patterns. Alternatively, analog methods with analog building blocks act on the signal in the continuous domain. This paper primarily aims at analysing the occurrence of such deterministic fractal noise patterns due to digital sampling and in further explores analog methods to mitigate quantization induced adverse effects. To complement this study, the emergence of fractal noise patterns on phase measurements will be investigated with varying quantization levels. Additionally, SPICE simulations of the intended analog system will be performed using existing commercial models. The system's effectiveness will be evaluated, and its non-idealities will be compared against conventional methods.
Quantum noise sources exhibit true randomness, ensuring secure random numbers than classical noise sources. Optical quantum random number generators (QRNGs) exploit a wide range of quantum phenomena, making them a suitable candidate for harnessing randomness. Among these, phase fluctuation based optical QRNGs are particularly popular owing to their straightforward approach. Conventional phase fluctuation QRNGs rely on translation of phase fluctuation to amplitude variation to produce randomness. Contemporary phase fluctuation QRNGs have also demonstrated simultaneous dual quadrature measurement methods, enabling phase measurements between quadrature components. In comparison to former conventional methods, phase measurement between quadratures intrinsically has improved quantum to classical noise properties. However, such phase measurements employ digital sampling prior to digital phase measurement which in turn gives rise to unintended deterministic fractal noise patterns in the probability distribution. Digital sampling due to its inherent amplitude quantization results in varying density of the measurable phase noise levels leading to deterministic fractal patterns. Alternatively, analog methods with analog building blocks act on the signal in the continuous domain. This paper primarily aims at analysing the occurrence of such deterministic fractal noise patterns due to digital sampling and in further explores analog methods to mitigate quantization induced adverse effects. To complement this study, the emergence of fractal noise patterns on phase measurements will be investigated with varying quantization levels. Additionally, SPICE simulations of the intended analog system will be performed using existing commercial models. The system's effectiveness will be evaluated, and its non-idealities will be compared against conventional methods.
Quantum random number generator (QRNG) utilizes the intrinsic randomness of quantum systems to generate completely unpredictable and genuine random numbers, finding wide applications across many fields. QRNGs relying on the phase noise of a laser have attracted considerable attention due to their straightforward system architecture and high random number generation rates. However, traditional phase noise QRNGs suffer from a 50% loss of quantum entropy during the randomness extraction process. In this paper, we propose a phase-reconstruction quantum random number generation scheme, in which the phase noise of a laser is reconstructed by simultaneously measuring the orthogonal quadratures of the light field using balanced detectors. This enables direct discretization of uniform phase noise, and the min-entropy can achieve a value of 1. Furthermore, our approach exhibits inherent robustness against the classical phase fluctuations of the unbalanced interferometer, eliminating the need for active compensation. Finally, we conducted experimental validation using commercial optical hybrid and balanced detectors, achieving a random number generation rate of 1.96 Gbps at a sampling rate of 200 MSa/s.
Random Number Generators (QRNGs) represent a promising alternative to classical pseudorandom methods, providing a genuine source of randomness based on the fundamental principles of quantum mechanics.This article investigates a particular class of QRNGs -Optical Quantum Random Number Generators (OQRNGs) -which rely on phenomena such as quantum state superposition, wavefunction collapse, vacuum fluctuations, and Raman scattering to generate random bits.The architecture of these systems is analyzed in detail, along with the types of photon sources and detectors employed, as well as the entropy extraction mechanisms.Through a comparative approach, the advantages and limitations of each technology are highlighted: from the simplicity of implementation in beam-splitter-based generators to the high bit rates and scalability offered by systems using homodyne detection or Raman-based schemes.The study results indicate that OQRNGs can be successfully integrated into critical post-quantum security infrastructures, providing verifiable randomness that is fundamentally irreproducible by algorithmic means.In conclusion, optical quantum random number generators constitute a key step toward enhancing digital security by directly harnessing the fundamental uncertainty inherent in the physical nature of light.
Abstract Quantum random number generators give the opportunity to, in theory, obtain completely unpredictable numbers only perturbed by the noise in the measurement. The obtained data can be digitalized and processed so that it gives as a result a uniform sequence of binary random numbers without any relation with the classical noise in the system. In this work we analyze the performance of optical QRNGs with three different arrangements: a homodyne detector measuring vacuum fluctuations, a homodyne detector measuring amplified spontaneous emission from an EDFA and a spontaneous emission phase noise-based generator. The raw data from the experiments is processed using a Toeplitz extractor, giving as a result sequences of binary numbers capable of passing the NIST Statistical Test Suite.
Random Number Generators (RNGs) are crucial for applications ranging from cryptography to simulations. Depending on the source of randomness, RNGs are classified into Pseudo-Random Number Generators (PRNGs), True Random Number Generators (TRNGs), and Quantum Random Number Generators (QRNGs). This work presents the end-to-end development of a high-speed, high-efficiency, phase-noise-based QRNG system that taps into the quantum phase noise of a single-frequency laser, with randomness originating from spontaneous emission. Using a self-heterodyne measurement with a semiconductor laser (linewidth ≈ 5.23 GHz) operated near threshold and a $\sim$48 cm fiber delay line, a raw data generation rate of 2.0 Gbps is achieved. To ensure uniform randomness in the QRNG output, robust extraction techniques developed in-house, such as the Toeplitz Strong Extractor (TSE), are used. Randomness validation using the NIST and Diehard test suites confirms that all statistical tests pass at standard confidence levels. The developed system achieves a post-processed generation rate of 1.0 Gbps in operation and attains a Technology Readiness Level (TRL) of 7, approaching TRL 8, making it suitable for real-time secure applications such as cryptographic key generation and stochastic modeling.
Randomness is essential ingredient for applications in cryptography, stochastic simulation, and fundamental science experiments [American Scientist 89, 4 (2001); PRL 115, 25 (2015)]. Common practice is to generate random numbers from mathematical algorithm using Pseudo-random number generators. We are interested in tackling this problem with quantum technology. Phase diffusion in spontaneous emission events is a quantum phenomena with inherent randomness [Opt. Express 19, 21 (2011)]. Implementations of this scheme using pulsed lasers can yield high-speed quantum random number generation (QRNG) [Opt. Express 22, 2 (2014)]. The general interest in the laser phase diffusion QRNG setup has been mainly focused on and motivated by the speed of the random number generations. Little has been stated about the performance of quantum phase noise as a randomness source in QRNG, from the perspective of the physics involved. We reanalyze the process of phase diffusion based QRNG and give an intuitive explaining picture of the underlying physics. Our findings show that a pulsed process is beneficial over the continuous-wave approach and give a upper bound of maximum random bit rate for a given experimental setting. In detail, the output of a semiconductor laser contains fluctuations in intensity and phase. This was originally studied first by Charles Henry in 1982 [J. Lightwave Techn. 4, 3 (1986)]. Based on that one can identify two phenomena contributing to the phase noise, which takes the form of a random walk. First, there will be phase changes due to the carrier-induced change in refractive index in the semiconductor laser. Second, spontaneous emission events take place in the active medium [Opt. Express 19, 21 (2011)]. Naturally, taking spontaneous emission events into account necessitates the application of stochastic laser rate equations for theoretical description. We solve these equations numerically be a Monte-Carlo simulation and investigate several random walk scenarios. One of our essential findings is that the phase fluctuation becomes much larger in the pulsed laser regime than in the continuous-wave mode. Additionally, there is a natural limit on the maximum pulse repetition rate for a given pulse width, since the phase jumps become smaller for shorter pulse distances. Since phase measurement is not a feasible procedure for optical signals, the phase fluctuation needs to be converted to an observable macroscopic parameter such as the optical intensity. This can be done by using an interferometer setup. The whole experimental setting is shown in Fig. 2 (left). An DFB laser diode is modulated using gain-switching technique to generate uniform amplitude signals with random phases. Each signal interferes with neighboring pulses through an unbalanced Mach-Zehnder interferometer. The delay in one arm was set to equal to the pulse repetition rate. With this setup we investigate the influence of several parameters on the shape of the probability distribution determining the quality of QRNG. The theoretical as well as experimental findings can help to find physical standards for QRNG verification rather than the ones based on classical statistical information theory.
Quantum random number generators (QRNGs) based on semiconductor laser phase noise are an inexpensive and efficient resource for true random numbers. Commercially available technology allows for designing QRNG setups tailored to specific use cases. However, it is important to constantly monitor whether the QRNG is performing according to the desired security standards in terms of independence and uniform distribution of the generated numbers. This is especially important in cryptographic applications. This paper presents a test scheme that helps to assess the acceptable operating conditions of a semiconductor laser for QRNG operation, using commonly accessible methods. This can be used for system monitoring, but crucially also to help the user choose the laser diode that better suits their needs. Two specific quality measurements, ensuring proper operation of the device, are explained and discussed. Setup-specific approaches for setting an acceptance boundary for these measures are presented, and exemplary measurement data showing their effectiveness are given. By following the comprehensible procedure described here, a QRNG qualification environment tailored to specific security requirements can be reproduced.