Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Models of superconducting coplanar transmission lines

Sasan Razmkhah, Pascal Febvre, Kyle Jackman, C. Fourie

Published Jul 28, 2019• 0 citations
OpenAlex

Abstract

The objective of this work is to develop compact models of PTLs to perform fast simulations of SFQ pulse propagation along PTLs. We focus here on coplanar PTLs.The first step was to find accurate analytical models that match results obtained by 2.5D and 3D numerical solvers.These models are adapted to take into account the behaviour up to THz frequencies, above the superconductor gap.

Related papers

Modeling of Superconducting Passive Transmission Lines

Paul le Roux, Kyle Jackman, Johannes A. Delport +1 more

Superconducting technologies are moving toward very large-scale integration (VLSI) of circuits. Passive transmission lines (PTLs) are used to quickly and efficiently propagate single flux quantum pulses between separated logic elements of these VLSI circuits. PTLs are often insufficiently modeled to correspond to reality. Therefore, the PTL needs to be thoroughly studied to determine realistic propagation characteristics. A quasi-transverse magnetic (TM) formulation is used to study superconducting passive transmission lines. The ambient temperature and changes in penetration depth with frequency are taken into account when solving the electromagnetic fields of a PTL. Per-frequency transmission line parameters are extracted from the quasi-TM field solutions. The results show a very close correlation to TetraHenry, an existing 3D solver, at significantly reduced computational cost. The results also clearly show that PTL propagation characteristics are sensitive to frequency and temperature.

IEEE Transactions on Applied Superconductivity•Mar 18, 2019•13 citations

Propagation of picosecond pulses on superconducting transmission line interconnects *

Vladimir V. Talanov, Derek Knee, David C. Harms +5 more

Abstract Interconnects are a major discriminator for superconducting digital technology, enabling energy-efficient data transfer and high-bandwidth heterogeneous integration. We report a method to simulate propagation of picosecond pulses in superconducting passive transmission lines (PTLs). A frequency-domain propagator model obtained from the Ansys high-frequency structure simulator (HFSS) field solver is incorporated in a Cadence Spectre circuit model, so that the particular PTL geometry can be simulated in the time-domain. The Mattis Bardeen complex conductivity of the superconductor is encoded in the HFSS field solver as a complex-conductivity insulator. Experimental and simulation results show that Nb 20 Ω microstrip PTLs with 200 nm interlayer dielectric thickness can support propagation of a single-flux-quantum pulse up to 7 mm and a double-flux-quantum pulse up to 28 mm.

arXiv:2104.07371•Superconductor Science and Technology•Feb 22, 2022•8 citations

Fabrication and Characterisation of Superconducting Coplanar Waveguide Resonators for Circuit QED Applications

Martin G oppl, R. J. Schoelkopf, Andreas J. Wallraff

Bulletin of the American Physical Society•Mar 11, 2008•0 citations

Repeater Insertion in SFQ Interconnect

Tahereh Jabbari, Gleb Krylov, Stephen R. Whiteley +2 more

Superconductive passive transmission lines (PTL) are widely used for signal routing in large-scale rapid single flux quantum (RSFQ) circuits. Due to the imperfect matching of the transmission lines between the driver and receiver, single flux quantum (SFQ) pulses are partially reflected. The round trip propagation time of these reflections can coincide with the following SFQ pulse, resulting in a decrease in bias margins or incorrect circuit behavior. This resonant effect depends upon the length of the PTL and the clock frequency of the signal. A methodology to reduce and manage this effect is the focus of this article. A closed-form expression describing the dependence of the resonance frequency on the length of the PTL is presented. This expression describes a set of forbidden lengths for PTL interconnect segments in RSFQ circuits. The proposed methodology and algorithm insert active PTL-based repeaters into long superconductive interconnect while ensuring the length of the line segment is outside the forbidden region and increasing bias margins.

IEEE Transactions on Applied Superconductivity•Jun 9, 2020•58 citations

Modeling dielectric loss in superconducting coplanar-waveguide resonators

Veikka Taka

•Dec 18, 2020•0 citations

Improving the performance of superconducting coplanar waveguide resonators using interface engineering

Archan Banerjee, Mohammed Alghadeer, Ahemd Hajir +5 more

Bulletin of the American Physical Society•Mar 3, 2020•0 citations
The objective of this work is to develop compact models of PTLs to perform fast simulations of SFQ pulse propagation along PTLs. We focus here on coplanar PTLs.The first step was to find accurate analytical models that match results obtained by 2.5D and 3D numerical solvers.These models are adapted to take into account the behaviour up to THz frequencies, above the superconductor gap.
Superconducting technologies are moving toward very large-scale integration (VLSI) of circuits. Passive transmission lines (PTLs) are used to quickly and efficiently propagate single flux quantum pulses between separated logic elements of these VLSI circuits. PTLs are often insufficiently modeled to correspond to reality. Therefore, the PTL needs to be thoroughly studied to determine realistic propagation characteristics. A quasi-transverse magnetic (TM) formulation is used to study superconducting passive transmission lines. The ambient temperature and changes in penetration depth with frequency are taken into account when solving the electromagnetic fields of a PTL. Per-frequency transmission line parameters are extracted from the quasi-TM field solutions. The results show a very close correlation to TetraHenry, an existing 3D solver, at significantly reduced computational cost. The results also clearly show that PTL propagation characteristics are sensitive to frequency and temperature.
Abstract Interconnects are a major discriminator for superconducting digital technology, enabling energy-efficient data transfer and high-bandwidth heterogeneous integration. We report a method to simulate propagation of picosecond pulses in superconducting passive transmission lines (PTLs). A frequency-domain propagator model obtained from the Ansys high-frequency structure simulator (HFSS) field solver is incorporated in a Cadence Spectre circuit model, so that the particular PTL geometry can be simulated in the time-domain. The Mattis Bardeen complex conductivity of the superconductor is encoded in the HFSS field solver as a complex-conductivity insulator. Experimental and simulation results show that Nb 20 Ω microstrip PTLs with 200 nm interlayer dielectric thickness can support propagation of a single-flux-quantum pulse up to 7 mm and a double-flux-quantum pulse up to 28 mm.
Superconductive passive transmission lines (PTL) are widely used for signal routing in large-scale rapid single flux quantum (RSFQ) circuits. Due to the imperfect matching of the transmission lines between the driver and receiver, single flux quantum (SFQ) pulses are partially reflected. The round trip propagation time of these reflections can coincide with the following SFQ pulse, resulting in a decrease in bias margins or incorrect circuit behavior. This resonant effect depends upon the length of the PTL and the clock frequency of the signal. A methodology to reduce and manage this effect is the focus of this article. A closed-form expression describing the dependence of the resonance frequency on the length of the PTL is presented. This expression describes a set of forbidden lengths for PTL interconnect segments in RSFQ circuits. The proposed methodology and algorithm insert active PTL-based repeaters into long superconductive interconnect while ensuring the length of the line segment is outside the forbidden region and increasing bias margins.