Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Computer Communications and Networks (ICCCN)

On the Effect of Post-Processing on QRNG-Based Key Generation for Resource-Constrained IoT

Oluwole Adetifa, Guobin Xu, Jianzhou Mao, Eric Sakk, Shuangbao Wang

Published Jul 1, 2026• 0 citations
Publisher

Abstract

High-quality entropy is critical for secure key generation in resource-constrained Internet of Things (IoT) systems. While hardware Quantum Random Number Generators (QRNGs) are increasingly adopted, many systems still apply post-processing by default without first verifying whether these steps improve or degrade the quality of an already strong quantum source. This paper presents an empirical study comparing raw and post-processed QRNG output for cryptographic key generation, using an ID Quantique PCIe-240M accessed directly via the kernel driver in raw Sample Mode, bypassing the vendor library. Across 30 independent datasets, including a 24-cycle hourly study, we perform the evaluations with NIST SP 800-22 testing, Shannon entropy measurement, byte frequency analysis, bias and correlation checks, XOR shifted-copy autocorrelation testing, and Kolmogorov-Smirnov testing. Two conditioning methods, Von Neumann corrector and XOR whitening, are implemented as VHDL modules and validated through FPGA simulation in GHDL to enable controlled conditioning experiments. Our evaluation results show that post-processing degraded the QRNG source. XOR whitening reduced entropy and introduced measurable bias, while the Von Neumann corrector consistently failed NIST STS evaluation. QRNG-derived keys were further integrated into an authenticated encryption workflow using AES-256-CBC with HMAC-SHA256 to demonstrate practical applicability in IoT.

DOI
10.1109/icccn69946.2026.11662563

Related papers

A Post-Processing Method for Quantum Random Number Generator Based on Zero-Phase Component Analysis Whitening

Longju Liu, Jie Yang, Mei Wu +4 more

Quantum Random Number Generators (QRNGs) have been theoretically proven to be able to generate completely unpredictable random sequences, and have important applications in many fields. However, the practical implementation of QRNG is always susceptible to the unwanted classical noise or device imperfections, which inevitably diminishes the quality of the generated random bits. It is necessary to perform the post-processing to extract the true quantum randomness contained in raw data generated by the entropy source of QRNG. In this work, a novel post-processing method for QRNG based on Zero-phase Component Analysis (ZCA) whitening is proposed and experimentally verified through both time and spectral domain analysis, which can effectively reduce auto-correlations and flatten the spectrum of the raw data, and enhance the random number generation rate of QRNG. Furthermore, the randomness extraction is performed after ZCA whitening, after which the final random bits can pass the NIST test.

Entropy•Jan 14, 2025•7 citations

FPGA-based Toeplitz Strong Extractor for Quantum Random Number Generators

Shubham Chouhan, K S V Anurag, G. Raghavan +1 more

Quantum Random Number Generators (QRNGs) serve as high entropy sources for Quantum Key Distribution (QKD) systems. The raw data from quantum sources however require post-processing to generate a nearly uniform distribution. This work presents a state-of-the-art implementation of the Toeplitz Strong Extractor on an FPGA, achieving a benchmark extraction speed of 26.57 Gbps. A detailed implementation flow of the post-processing on FPGA is presented along with the various execution speeds obtained based on different randomness extraction ratios. Raw data from an in-house phase noise-based QRNG is processed on the FPGA using the implementation and the output is validated via the NIST STS 2.1.2 statistical randomness tests suite.

arXiv:2505.02868•IEEE India Council International Subsections Conference (INDISCON)•Aug 22, 2024•6 citations

Developing Quantum Trusted Platform Module (QTPM) to Advance IoT Security

Guobin Xu, Oluwole Adetifa, Jianzhou Mao +2 more

Randomness is integral to computer security, influencing fields such as cryptography and machine learning. In the context of cybersecurity, particularly for the Internet of Things (IoT), high levels of randomness are essential to secure cryptographic protocols. Quantum computing introduces significant risks to traditional encryption methods. To address these challenges, we propose investigating a quantum-safe solution for IoT-trusted computing. Specifically, we implement the first lightweight, practical integration of a quantum random number generator (QRNG) with a software-based trusted platform module (TPM) to create a deployable quantum trusted platform module (QTPM) prototype for IoT systems to improve cryptographic capabilities. The proposed quantum entropy as a service (QEaaS) framework further extends quantum entropy access to legacy and resource-constrained devices. Through the evaluation, we compare the performance of QRNG with traditional Pseudo-random Number Generators (PRNGs), demonstrating the effectiveness of the quantum TPM. Our paper highlights the transformative potential of integrating quantum technology to bolster IoT security.

Future Internet•Apr 26, 2025•4 citations

A Quantum-Entropy-Based AES Framework for Energy-Efficient and Post-Quantum Secure IoT Wireless Sensor Networks

Mohammad Sirajuddin, Ravikumar Thallapalli, Dr.Burla Srinivas +1 more

The rapid development of Internet of Things (IoT) applications has led to the large-scale deployment of wireless sensor networks (WSNs) that incessantly generate and transmit sensitive data over wireless networks.Although the current mostly used symmetric encryption algorithm for securing such networks is the Advanced Encryption Standard (AES), the advent of quantum computing threatens the long-term security of AES, as well as the weaknesses inherent to the key generation, distribution, and lifecycle management.This research paper proposes a Quantum Enhanced AES framework for IoT based WSNs which integrates the use of Quantum Random Number Generator (QRNG) based high entropy key generation, key injection against side channel attacks and dynamic session-based rekeying.Compared with classical AES and two state-of-the-art security frameworks based on quantum computing, i.e., QKDassisted AES scheme and lightweight post-quantum security hybrid AES framework, the proposed scheme increases the entropy of the key by about 20% (from 0.82 to 0.99), and lowers the key exposure risk by more than 60% by using session-based rekeying.Simulation results indicate that the proposed method can achieve up to 8 to10% higher throughput and 22% lower end-to-end delay than post-quantum AES schemes, and also prolongs the network lifetime by almost 15% under realistic IoT-WSN workloads.The framework maintains and does not alter the AES standard compliance and does not make any changes to the AES core, thus it ensures practical applicability.These results show that the proposed approach offers a good quantum resilience with low performance and energy overhead, which is suitable for long-lived and security-critical IoT-WSN deployment.

International Journal of Computer Networks And Applications•Aug 30, 2026•0 citations

Quantum Random Number Generation for Secure Communications Using Hybrid Hadamard Controlled-NOT Gates with XOR Bitmask

Lutfiatul Mar’Ah, Rahmat Mulyawan, Andriyan Bayu Suksmono

The reliability and security of telecommunication systems depend on the quality of random number generators (RNGs). Quantum Random Number Generators (QRNGs) enhance randomness over classical methods, improving cryptographic strength. This paper evaluates three QRNG implementations using IBM quantum computers, analyzing their methodologies, performance, and limitations. We introduce a new QRNG algorithm on the IBM Quantum Experience (IBMQ) platform, using real quantum computers instead of simulators, and incorporating post-processing with XOR bit masking. Our algorithm achieves entropy 0.86458 and passes more NIST 800-90B and NIST 800–22 randomness tests, demonstrating its effectiveness and reliability. This research supports secure telecommunication technologies by providing a reliable source of true randomness.

IEEE International Conference on Advanced Telecommunication and Networking Technologies (ATNT)•Sep 9, 2024•2 citations

Parallel and real-time post-processing for quantum random number generators

Xiaomin Guo, Lin, Fading, Lin, Jiehong +4 more

Quantum systems are particularly suited for generating true randomness due to their inherent unpredictability, which can be justified on physical principles. However, practical implementations of Quantum RNGs (QRNGs) are always subject to noise, or uncontrollable influences, diminishing the quality of raw randomness produced. This necessitates post-processing to convert raw output into genuine randomness. In current QRNG implementations, the critical issue of seed updating is often overlooked, risking security vulnerabilities due to increased security parameters when seeds are reused in post-processing, and frequent seed updates fail to yield net randomness, while reusing seeds relies on the assumption that the original sequence inputs are independent.In this work, we have provided a specific scheme for seed updates that balances practicality and security, exploring the parallel and real-time implementation of multiple seed real-time updating toeplitz hash extractors in an FPGA to achieve parallel QRNGs, focusing on efficient hardware computation resource use. Through logic optimization, we achieved a greater number of parallel channels and a post-processing matrix size three times larger than previous works on the same FPGA platform, utilizing fewer logic resources. This resulted in a higher rate of random number generation and enhanced security. Furthermore, with the use of higher-performance ADCs, we attained a random number production rate exceeding 20Gbps.High-speed random number transfer and seed updating were achieved using the PCIe high-speed interface.This marks a significant step toward chip-based parallel QRNGs, enhancing the practicality of CV QRNGs in trusted, device-independent, and semi-device-independent scenarios.

arXiv:2403.19479•Mar 28, 2024•6 citations
High-quality entropy is critical for secure key generation in resource-constrained Internet of Things (IoT) systems. While hardware Quantum Random Number Generators (QRNGs) are increasingly adopted, many systems still apply post-processing by default without first verifying whether these steps improve or degrade the quality of an already strong quantum source. This paper presents an empirical study comparing raw and post-processed QRNG output for cryptographic key generation, using an ID Quantique PCIe-240M accessed directly via the kernel driver in raw Sample Mode, bypassing the vendor library. Across 30 independent datasets, including a 24-cycle hourly study, we perform the evaluations with NIST SP 800-22 testing, Shannon entropy measurement, byte frequency analysis, bias and correlation checks, XOR shifted-copy autocorrelation testing, and Kolmogorov-Smirnov testing. Two conditioning methods, Von Neumann corrector and XOR whitening, are implemented as VHDL modules and validated through FPGA simulation in GHDL to enable controlled conditioning experiments. Our evaluation results show that post-processing degraded the QRNG source. XOR whitening reduced entropy and introduced measurable bias, while the Von Neumann corrector consistently failed NIST STS evaluation. QRNG-derived keys were further integrated into an authenticated encryption workflow using AES-256-CBC with HMAC-SHA256 to demonstrate practical applicability in IoT.
Quantum Random Number Generators (QRNGs) have been theoretically proven to be able to generate completely unpredictable random sequences, and have important applications in many fields. However, the practical implementation of QRNG is always susceptible to the unwanted classical noise or device imperfections, which inevitably diminishes the quality of the generated random bits. It is necessary to perform the post-processing to extract the true quantum randomness contained in raw data generated by the entropy source of QRNG. In this work, a novel post-processing method for QRNG based on Zero-phase Component Analysis (ZCA) whitening is proposed and experimentally verified through both time and spectral domain analysis, which can effectively reduce auto-correlations and flatten the spectrum of the raw data, and enhance the random number generation rate of QRNG. Furthermore, the randomness extraction is performed after ZCA whitening, after which the final random bits can pass the NIST test.
Quantum Random Number Generators (QRNGs) serve as high entropy sources for Quantum Key Distribution (QKD) systems. The raw data from quantum sources however require post-processing to generate a nearly uniform distribution. This work presents a state-of-the-art implementation of the Toeplitz Strong Extractor on an FPGA, achieving a benchmark extraction speed of 26.57 Gbps. A detailed implementation flow of the post-processing on FPGA is presented along with the various execution speeds obtained based on different randomness extraction ratios. Raw data from an in-house phase noise-based QRNG is processed on the FPGA using the implementation and the output is validated via the NIST STS 2.1.2 statistical randomness tests suite.
Randomness is integral to computer security, influencing fields such as cryptography and machine learning. In the context of cybersecurity, particularly for the Internet of Things (IoT), high levels of randomness are essential to secure cryptographic protocols. Quantum computing introduces significant risks to traditional encryption methods. To address these challenges, we propose investigating a quantum-safe solution for IoT-trusted computing. Specifically, we implement the first lightweight, practical integration of a quantum random number generator (QRNG) with a software-based trusted platform module (TPM) to create a deployable quantum trusted platform module (QTPM) prototype for IoT systems to improve cryptographic capabilities. The proposed quantum entropy as a service (QEaaS) framework further extends quantum entropy access to legacy and resource-constrained devices. Through the evaluation, we compare the performance of QRNG with traditional Pseudo-random Number Generators (PRNGs), demonstrating the effectiveness of the quantum TPM. Our paper highlights the transformative potential of integrating quantum technology to bolster IoT security.
The rapid development of Internet of Things (IoT) applications has led to the large-scale deployment of wireless sensor networks (WSNs) that incessantly generate and transmit sensitive data over wireless networks.Although the current mostly used symmetric encryption algorithm for securing such networks is the Advanced Encryption Standard (AES), the advent of quantum computing threatens the long-term security of AES, as well as the weaknesses inherent to the key generation, distribution, and lifecycle management.This research paper proposes a Quantum Enhanced AES framework for IoT based WSNs which integrates the use of Quantum Random Number Generator (QRNG) based high entropy key generation, key injection against side channel attacks and dynamic session-based rekeying.Compared with classical AES and two state-of-the-art security frameworks based on quantum computing, i.e., QKDassisted AES scheme and lightweight post-quantum security hybrid AES framework, the proposed scheme increases the entropy of the key by about 20% (from 0.82 to 0.99), and lowers the key exposure risk by more than 60% by using session-based rekeying.Simulation results indicate that the proposed method can achieve up to 8 to10% higher throughput and 22% lower end-to-end delay than post-quantum AES schemes, and also prolongs the network lifetime by almost 15% under realistic IoT-WSN workloads.The framework maintains and does not alter the AES standard compliance and does not make any changes to the AES core, thus it ensures practical applicability.These results show that the proposed approach offers a good quantum resilience with low performance and energy overhead, which is suitable for long-lived and security-critical IoT-WSN deployment.
The reliability and security of telecommunication systems depend on the quality of random number generators (RNGs). Quantum Random Number Generators (QRNGs) enhance randomness over classical methods, improving cryptographic strength. This paper evaluates three QRNG implementations using IBM quantum computers, analyzing their methodologies, performance, and limitations. We introduce a new QRNG algorithm on the IBM Quantum Experience (IBMQ) platform, using real quantum computers instead of simulators, and incorporating post-processing with XOR bit masking. Our algorithm achieves entropy 0.86458 and passes more NIST 800-90B and NIST 800–22 randomness tests, demonstrating its effectiveness and reliability. This research supports secure telecommunication technologies by providing a reliable source of true randomness.
Quantum systems are particularly suited for generating true randomness due to their inherent unpredictability, which can be justified on physical principles. However, practical implementations of Quantum RNGs (QRNGs) are always subject to noise, or uncontrollable influences, diminishing the quality of raw randomness produced. This necessitates post-processing to convert raw output into genuine randomness. In current QRNG implementations, the critical issue of seed updating is often overlooked, risking security vulnerabilities due to increased security parameters when seeds are reused in post-processing, and frequent seed updates fail to yield net randomness, while reusing seeds relies on the assumption that the original sequence inputs are independent.In this work, we have provided a specific scheme for seed updates that balances practicality and security, exploring the parallel and real-time implementation of multiple seed real-time updating toeplitz hash extractors in an FPGA to achieve parallel QRNGs, focusing on efficient hardware computation resource use. Through logic optimization, we achieved a greater number of parallel channels and a post-processing matrix size three times larger than previous works on the same FPGA platform, utilizing fewer logic resources. This resulted in a higher rate of random number generation and enhanced security. Furthermore, with the use of higher-performance ADCs, we attained a random number production rate exceeding 20Gbps.High-speed random number transfer and seed updating were achieved using the PCIe high-speed interface.This marks a significant step toward chip-based parallel QRNGs, enhancing the practicality of CV QRNGs in trusted, device-independent, and semi-device-independent scenarios.