Quantum processors in the Noisy Intermediate-Scale Quantum (NISQ) era are severely constrained by spatial hardware asymmetries, temporal drift, and multi-qubit crosstalk. Traditional error suppression protocols apply static decoupling or phenomenological calibrations that struggle under continuous decoherence stress. Building upon the Entropic-Resistance framework—where spacetime is represented as a discrete, algorithmically expanding topological network and time is governed by recursive relaxation—we extend deterministic Causal-AI Taylor sensitivity operators (j1, j2) to multi-qubit topologies. We introduce a Just-In-Time (JIT) compensation engine that queries real-time QPU telemetry (qubit-specific dephasing T2 times and native two-qubit gate error rates) to dynamically compute non-commutative phase compensations. By decomposing physical microwave rotations inside logic gates, microscopic counter-rotations are embedded directly into hardware instructions. We validate this protocol on IBM Quantum's Heron processor (ibm_fez) by subjecting 3-qubit and 5-qubit Greenberger-Horne-Zeilinger (GHZ) states to deliberate decoherence stress via calibrated temporal delays. On 3-qubit states, the Lasky-Tensor engine achieves an absolute fidelity improvement of +3.81% (32.5% relative error reduction). On fragile 5-qubit linear networks, it delivers a +3.42% absolute gain (17.2% relative error reduction). These results establish that recursive network stress models scale effectively, providing a deterministic, white-box quantum error mitigation paradigm without physical qubit overhead. Methodology & Hardware: Hardware: IBM Quantum (ibm_fez, Heron architecture) Framework: Qiskit Runtime SamplerV2 Underlying Theory: Entropic-Resistance Paradigm / Causal-AI What-If Engine
Quantum processors in the Noisy Intermediate-Scale Quantum (NISQ) era are severely constrained by spatial hardware asymmetries, temporal drift, and multi-qubit crosstalk. Traditional error suppression protocols apply static decoupling or phenomenological calibrations that struggle under continuous decoherence stress. Building upon the Entropic-Resistance framework—where spacetime is represented as a discrete, algorithmically expanding topological network and time is governed by recursive relaxation—we extend deterministic Causal-AI Taylor sensitivity operators (j1, j2) to multi-qubit topologies. We introduce a Just-In-Time (JIT) compensation engine that queries real-time QPU telemetry (qubit-specific dephasing T2 times and native two-qubit gate error rates) to dynamically compute non-commutative phase compensations. By decomposing physical microwave rotations inside logic gates, microscopic counter-rotations are embedded directly into hardware instructions. We validate this protocol on IBM Quantum's Heron processor (ibm_fez) by subjecting 3-qubit and 5-qubit Greenberger-Horne-Zeilinger (GHZ) states to deliberate decoherence stress via calibrated temporal delays. On 3-qubit states, the Lasky-Tensor engine achieves an absolute fidelity improvement of +3.81% (32.5% relative error reduction). On fragile 5-qubit linear networks, it delivers a +3.42% absolute gain (17.2% relative error reduction). These results establish that recursive network stress models scale effectively, providing a deterministic, white-box quantum error mitigation paradigm without physical qubit overhead. Methodology & Hardware: Hardware: IBM Quantum (ibm_fez, Heron architecture) Framework: Qiskit Runtime SamplerV2 Underlying Theory: Entropic-Resistance Paradigm / Causal-AI What-If Engine
This paper presents the first experimental validation of Causal-AI topological control on real superconducting quantum hardware. Addressing the fundamental bottleneck of ambient 1/f flicker noise and dephasing in quantum processors, we operationalize the Entropic-Resistance framework—modeling spacetime as a discrete network and time as a recursive relaxation process—to optimize transmon qubit performance. By extracting deterministic Taylor sensitivity operators (j1,j2) from real-time calibration data of IBM Quantum’s live ibm_fez processor, we compute and execute an analytically adjusted "Lasky-pulse" amplitude. Comparative hardware execution against standard factory baselines (validated across live QPU job execution logs: da294biein7c73bea68g and da29qpkdedkc73erutlg) demonstrates that topological network optimization successfully bridges discrete recursive spacetime theory with operational quantum control without requiring hardware modifications.
Quantum error correction (QEC) faces a significant challenge in realistic noisy intermediate-scale quantum (NISQ) devices: correlated decoherence. Building upon the foundational QEC-C protocol, we introduce QEC-C II, a scalable framework that delivers robust fault tolerance against spatially and temporally correlated noise. By integrating decoherence-free subspace (DFS) principles and correlation-aware adaptive feedback, QEC-C II achieves exponential error suppression in simulation under correlated noise models, with fewer physical qubits than typical topological baselines for the same target error in our benchmarks. The protocol leverages an enhanced scaling law, β(n) = 0.788 e 0.360n , and efficiently suppresses noise with minimal computational overhead. We validate QEC-C II on 28-qubit GHZ states, extend it to 56-qubit subspaces, and conduct 84-qubit stress-test simulations under correlated noise models. The results demonstrate sustained fidelities exceeding 99.99 % in simulations under realistic dephasing, amplitude-damping, burst-error, and correlated decoherence scenarios, with rapid convergence (typically ≤ 2 iterations in our simulations). QEC-C II significantly reduces both resource and control complexity, simplifying hardware integration and improving performance with increasing system size. This work provides a practical pathway toward resource-efficient fault tolerance in quantum processors operating in real-world correlated environments.
This work demonstrates real-time predictive classical-quantum feedback control on the IBM Kingston superconducting quantum processor, characterizing the hardware latency bottleneck of dynamic Hamiltonian shaping. Decoherence in quantum systems is traditionally viewed as a technical obstacle arising from environmental noise; this paper interprets decoherence as the coupling of a localized system to a dissipative, high-entropy environmental field. An ancilla-based modular sensor architecture is introduced to facilitate real-time error syndrome extraction without collapsing the target state. A software-defined controller, implemented via a quantized Variational Autoencoder-Feed-Forward Network (VAE-FFN) pipeline and optimized via empirical threshold calibration under strict 4-bit latency constraints, provides predictive Hamiltonian control to stabilize the system boundary. The integration of a 3D volumetric topological complex outlines a geometric architecture designed to mitigate spatial error cascades. Through temporal delay sweeps, empirical telemetry demonstrates that the volumetric lattice achieves localized containment of non-commuting phase defects, dynamically exploiting coherent Larmor precession to constrain spatial error propagation. Furthermore, rigorous statistical repetition mapping reveals a critical Noisy Intermediate-Scale Quantum (NISQ) latency bottleneck. The empirical data establishes that the temporal cost of classical-quantum feed-forward routing incurs a marginal macroscopic fidelity reduction (-1.01%). Crucially, this study reframes this differential not as a systemic regression, but as an explicit architectural trade-off: prioritizing rigorous variance suppression and operational stability over unmitigated peak fidelity. By establishing a highly predictable, predictively controlled baseline, this framework explores practical control strategies consistent with Approximate Quantum Error Correction (AQEC) approaches, bounding the operational consequences of the Eastin-Knill constraint within an addressable temporal control protocol.
Quantum decoherence, thermal bath fluctuations, parasitic inter-qubit cross-talk, and heavy-tailed dynamical shocks represent the fundamental physical barriers to scaling fault-tolerant quantum computing registers. Traditional mitigation strategies focus entirely on passive external isolation or massive physical-to-logical qubit overheads, which fail under non-Markovian noise regimes or substrate aging. This paper presents a definitive, internal architectural solution: an Active Error-Suppressing Topological Quantum Core governed by Realized Active Integrated Information (Φ_TAI) metrics. By injecting real-time thermodynamic feedback loops into a highly integrated, 3D cross-coupled quantum network, we mathematically throttle environmental dephasing. We validate this framework through a multi-stage credibility gauntlet, testing the system against:1. Non-Markovian 1/f colored noise (Stabilizing a QFI survival floor of 0.8277 through 100 cycles).2. Severe thermal ramps (Preserving a room-temperature quantum coherence of 0.6741 at 300 K).3. Intense capacitive cross-talk (χ = 0.80, achieving an over 77% drop in error to 0.2066).4. Compound heavy-tailed non-Gaussian dynamical shocks (Retaining a peak QFI floor of 0.9054). Furthermore, we outline the structural translation of this architecture into industry-standard Qiskit compiler layouts, expanding realized circuit integration from a fragile 0.2308 to an unassailable 2.6585. This layout natively insulates quantum phase data without logical qubit overheads, opening an asset-level path toward manufacturing ambient-temperature quantum hardware.
Quantum error mitigation (QEM) provides a practical route for estimating reliable observables on noisy intermediate-scale quantum (NISQ) devices. Traditional QEM strategies, including zero-noise extrapolation (ZNE) and Clifford data regression (CDR), rely on noise scaling or global regression, and their performance is constrained by the exponential growth of the system degrees of freedom. We construct a graph-enhanced mitigation (GEM) framework, which incorporates physical information into the model representation. In this work, quantum circuits are encoded as attributed graphs. Hardware-level physical information is mapped to node and edge features: local noise parameters such as calibration parameters T1, T2, and readout errors are encoded at nodes, while coupling-related information such as two-qubit gate errors is encoded as edge features. Graph neural networks are used to model how errors propagate along the physical coupling structure and build up into non-local correlations. This allows the model to capture local interactions and part of the resulting non-local correlations across qubits. A dual-branch affine correction is applied to maintain consistency with physical constraints. Experiments on 10-qubit and 16-qubit random circuits executed on superconducting quantum processors show that GEM provides a level of accuracy comparable to CDR at small scales, while yielding lower mean absolute error and improved stability in zero-shot transfer to larger systems. Results of the traditional QEM strategy indicate that global regression methods remain effective in low-dimensional settings but become less reliable as system degrees of freedom grow. In contrast, GEM makes use of local physical structures to show better scalability and generalization, while preserving the overall error propagation patterns. This work provides a practical scalable approach to QEM for NISQ devices.
The pursuit of high-fidelity digital quantum simulation is fundamentally constrained by the inevitable presence of noise in current and near-term quantum processors. While quantum error correction ultimately promises fault-tolerance, its substantial qubit overhead renders it impractical for the noisy intermediate-scale quantum (NISQ) era. This research addresses the critical gap between hardware imperfections and simulation accuracy by designing systematic, resource-efficient machine learning (ML) error-mitigation protocols tailored specifically for digital quantum simulation. Unlike generic error-suppression methods, our approach exploits the unique structural properties of simulated quantum dynamics—including time-translation invariance, locality of interactions, and conserved quantities—to inform the training of lightweight neural networks and Gaussian process regressors. We develop a hybrid framework that combines randomized compiling with data-driven noise-inversion models, enabling real-time estimation and subtraction of both coherent and incoherent errors without exponential sampling overhead. Through extensive numerical benchmarks on spin-chain and Fermi-Hubbard models, we demonstrate that our ML protocols achieve up to an order-of-magnitude reduction in infidelity compared to standard probabilistic error cancellation and zero-noise extrapolation, while requiring fewer calibration circuits. Furthermore, we introduce an adaptive online learning scheme that continuously refines the mitigation model during the simulation runtime, automatically adjusting to time-dependent drift in hardware noise. Our results establish a practical pathway toward scalable, high-accuracy quantum simulations on existing devices, with implications for condensed matter physics, quantum chemistry, and the development of quantum advantage benchmarks.