Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Distributed Computing and Electrical Circuits and Electronics (ICDCECE)

Optimization of 2×2 Multi-Mode Interferometer Coupler for Photonic Integrated Circuit Based Differential Phase-Shift Quantum Key Distribution

Mursal Ayub Hamdani, Avinash Vujji, Hayden Varughese Cheriyan, Jewel, Aryaman Chaudhary, Tejashwin Baskaran

Published Jul 1, 2026• 0 citations
Publisher

Abstract

The multimode interference (MMI) coupler is a key component in photonic integrated circuits for optical power splitting and signal routing. In this work, a $2 \times 2 \mathrm{MMI}$ coupler is analytically designed and evaluated for application in Differential Phase Shift Quantum Key Distribution (DPS-QKD) systems. The device operation is based on the self-imaging principle, where interference among guided modes enables controlled power distribution at the output ports. By adjusting structural parameters such as length, width, and refractive index profile, both symmetric and asymmetric splitting ratios are achieved. Particular emphasis is placed on non-ideal ratios such as 60:40, which are relevant for compensating system-level losses. Simulation and analytical results demonstrate that the optimized 60:40 configuration improves interference visibility to 0.988 while reducing the Quantum Bit Error Rate (QBER) to $\mathbf{1. 4 5} \boldsymbol{\%}$, significantly outperforming the conventional 50:50 design. The results confirm that controlled asymmetric splitting can effectively enhance DPS-QKD system performance under practical integrated photonic conditions.

DOI
10.1109/icdcece68961.2026.11646014

Related papers

PIC based Implementation of DPS-QKD Transceiver

Ashay A. Atkar, Harsh Saraf, Vinod Kumar +2 more

Photonic integrated circuits (PICs) provide several key benefits such as compact size, improved robustness, scalable manufacturing potential, and the capability for very fast operation. Despite advancements, the application of Photonic Integrated Circuits (PICs) for Differential Phase Shift QKD (DPS-QKD) remains relatively underexplored. DPS-QKD offers simplicity, high key generation efficiency, and resilience against photon-number splitting attacks, making it a promising quantum cryptography protocol. This work presents the working model of DPS-QKD using Lumerical interconnect, which is optimized for PIC design. Furthermore, we have carried out an analytical evaluation of the proposed PIC design based on the achievable QBER and the corresponding secured key rate. Our findings indicate that a secured DPS - QKD link can be achieved for a 200 km fiber length achieving 3.07% QBER and 1.8 Kbps secured key rate.

International Conference on Microwave, Optical and Communication Engineering•May 23, 2025•0 citations

Design of low-loss polarization-insensitive MMI based on silicon nitride

Guan-Zhong Huang, Guowei Zhang, Wei Chen +5 more

Integrated quantum key distribution (QKD) has achieved substantial advancements across different material platforms. Among these, silicon nitride has attracted widespread attention due to its low loss and compact size. However, silicon nitride exhibits pronounced polarization correlation, which makes it susceptible to unpredictable polarization state rotations induced by the fiber birefringence effect within the channel, thus affecting the normal operation of quantum processes. In this work, we design and fabricate the fundamental devices in QKD systems, namely 1×2 and 2×2 multimode interferometers (MMIs) with low polarization sensitivity and loss. We also improve the splitting balance via parameter optimization based on the particle swarm optimization (PSO) algorithm. Simulation results indicate that the 1×2 (2×2) MMI exhibits a loss of about 0.1 (0.2) dB, along with 0.001 (0.09) dB polarization-dependent loss (PDL) and a splitting ratio nearly 50:50 (±0.3%) at 1550nm, respectively. Test results for the fabricated devices demonstrate that the loss of both MMI types is confined to less than 0.25 dB, their PDL is kept within 0.2 dB, and splitting ratio imbalance is within 1% and exhibits temperature robustness. This research explores compact polarization-insensitive devices via a novel method, thereby laying the foundation for the development of integrated quantum information processing.

International Conference on Laser, Optical Technology, and Applications (LOTA)•Dec 16, 2025•0 citations

Laboratory Demonstration of Phase-Time Encoding Quantum Key Distribution System with Multimode Delay Interferometer

V V Tretiakov, Andrey N. Klimov, Kirill A. Balygin +1 more

Abstract We report on the adaptation of a commercially available fiber-based quantum key distribution (QKD) system with phase-time encoding to free-space operation. The proposed approach minimizes architectural modifications by replacing the single-mode receiving interferometer with a free-space multi-mode delay interferometer, enabling efficient detection of spatially distorted quantum states typical for atmospheric channels. Several interferometer configurations are experimentally investigated, and a multi-mode Michelson interferometer with polarization routing is identified as the optimal solution in terms of interference visibility, loss, and alignment robustness. The impact of chromatic and modal dispersion on phase-time interference is analyzed and shown to be manageable under realistic system parameters. A laboratory QKD experiment demonstrates stable operation with a quantum bit error rate of about 4.5% and a secret key rate of hundreds of bits per second, confirming the feasibility of extending fiber-based QKD platforms to free-space links.

Journal of Physics Conference Series•Jul 1, 2026•0 citations

Arbitrary integrated multimode interferometers for the elaboration of photonic qubits

Andrea Crespi, Roberta Ramponi, Daniel J. Brod +7 more

Integrated photonic circuits with many input and output modes are essential in applications ranging from conventional optical telecommunication networks, to the elaboration of photonic qubits in the integrated quantum information framework. In particular, the latter field has been object in the recent years of an increasing interest: the compactness and phase stability of integrated waveguide circuits are enabling experiments unconceivable with bulk-optics set-ups. Linear photonic devices for quantum information are based on quantum and classical interference effects: the desired circuit operation can be achieved only with tight fabrication control on both power repartition in splitting elements and phase retardance in the various paths. Here we report on a novel three-dimensional circuit architecture, made possible by the unique capabilities of femtosecond laser waveguide writing, which enables us to realize integrated multimode devices implementing arbitrary linear transformations. Networks of cascaded directional couplers can be built with independent control on the splitting ratios and the phase shifts in each branch. In detail, we show an arbitrarily designed 5×5 integrated interferometer: characterization with one- and two-photon experiments confirms the accuracy of our fabrication technique. We exploit the fabricated circuit to implement a small instance of the boson-sampling experiments with up to three photons, which is one of the most promising approaches to realize phenomena hard to simulate with classical computers. We will further show how, by studying classical and quantum interference in many random multimode circuits, we may gain deeper insight into the bosonic coalescence phenomenon.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 7, 2014•2 citations

Multimode quantum interference of photons in multiport integrated devices

Alberto Peruzzo, Anthony Laing, Alberto Politi +2 more

Photonics is a leading approach in realizing future quantum technologies and recently, optical waveguide circuits on silicon chips have demonstrated high levels of miniaturization and performance. Multimode interference (MMI) devices promise a straightforward implementation of compact and robust multiport circuits. Here, we show quantum interference in a 2×2 MMI coupler with visibility of V=95.6±0.9%. We further demonstrate the operation of a 4×4 port MMI device with photon pairs, which exhibits complex quantum interference behaviour. We have developed a new technique to fully characterize such multiport devices, which removes the need for phase-sensitive measurements and may find applications for a wide range of photonic devices. Our results show that MMI devices can operate in the quantum regime with high fidelity and promise substantial simplification and concatenation of photonic quantum circuits. Multimode interference devices could allow the implementation of multiport circuits for quantum technologies. Here, quantum interference is demonstrated in 2×2 and 4×4 multimode interference devices, and a technique is reported to characterize such devices.

arXiv:1007.1372•Nature Communications•Mar 1, 2011•216 citations

Phase Stable Integrated Delay Line Asymmetric Mach Zehnder Interferometers Enabled by High Efficiency 3 dB Couplers for Chip Scale QKD

Mahsa. Ghezelbash, Abdollah Eslami Majd

Precise temporal delay generation is a key requirement for asymmetric Mach-Zehnder interferometers (aMZIs) used in high-speed quantum key distribution (QKD) receivers. In this work, a compact integrated aMZI architecture based on a silicon nitride on silicon dioxide (Si3N4/SiO2) photonic platform is presented. A 3-dB directional coupler enabling accurate 50:50 power splitting at the 1550 nm telecommunication wavelength is designed and optimized. The coupling length is initially estimated from the effective index difference between the even and odd supermodes and subsequently refined using three-dimensional eigenmode expansion (EME) simulations. The optimized structure employs single-mode Si3N4 waveguides with a cross section of 1 um x 0.4 um, providing a group index close to 2 and enabling accurate delay engineering. Spectral analysis demonstrates stable 3-dB power splitting across the C-band with insertion loss below 0.5 dB and negligible power imbalance, indicating high transmission efficiency and structural symmetry. An integrated Si3N4 aMZI delay line providing a 500 ps optical delay, corresponding to a 2 GHz free spectral range (FSR), is further demonstrated. Simulations show nearly constant group delay across the 190-200 THz frequency range with sub-10 ps variation and a smooth, near-linear phase response. These characteristics enable interference visibility above 0.99, corresponding to an estimated quantum bit error rate (QBER) below 0.5 percent for gigahertz-rate time-bin QKD systems. The wideband linear phase behavior also indicates compatibility with wavelength division multiplexed (WDM) QKD architectures. The results confirm that the proposed Si3N4 integrated aMZI provides a low-loss, dispersion-controlled, and spectrally stable delay solution suitable for scalable chip-scale quantum photonic receivers.

physics.opticsCross-listedarXiv:2606.21542•Jun 22, 2026•0 citations
The multimode interference (MMI) coupler is a key component in photonic integrated circuits for optical power splitting and signal routing. In this work, a 2×2MMI2 \times 2 \mathrm{MMI}2×2MMI coupler is analytically designed and evaluated for application in Differential Phase Shift Quantum Key Distribution (DPS-QKD) systems. The device operation is based on the self-imaging principle, where interference among guided modes enables controlled power distribution at the output ports. By adjusting structural parameters such as length, width, and refractive index profile, both symmetric and asymmetric splitting ratios are achieved. Particular emphasis is placed on non-ideal ratios such as 60:40, which are relevant for compensating system-level losses. Simulation and analytical results demonstrate that the optimized 60:40 configuration improves interference visibility to 0.988 while reducing the Quantum Bit Error Rate (QBER) to 1.45%\mathbf{1. 4 5} \boldsymbol{\%}1.45%, significantly outperforming the conventional 50:50 design. The results confirm that controlled asymmetric splitting can effectively enhance DPS-QKD system performance under practical integrated photonic conditions.
Photonic integrated circuits (PICs) provide several key benefits such as compact size, improved robustness, scalable manufacturing potential, and the capability for very fast operation. Despite advancements, the application of Photonic Integrated Circuits (PICs) for Differential Phase Shift QKD (DPS-QKD) remains relatively underexplored. DPS-QKD offers simplicity, high key generation efficiency, and resilience against photon-number splitting attacks, making it a promising quantum cryptography protocol. This work presents the working model of DPS-QKD using Lumerical interconnect, which is optimized for PIC design. Furthermore, we have carried out an analytical evaluation of the proposed PIC design based on the achievable QBER and the corresponding secured key rate. Our findings indicate that a secured DPS - QKD link can be achieved for a 200 km fiber length achieving 3.07% QBER and 1.8 Kbps secured key rate.
Integrated quantum key distribution (QKD) has achieved substantial advancements across different material platforms. Among these, silicon nitride has attracted widespread attention due to its low loss and compact size. However, silicon nitride exhibits pronounced polarization correlation, which makes it susceptible to unpredictable polarization state rotations induced by the fiber birefringence effect within the channel, thus affecting the normal operation of quantum processes. In this work, we design and fabricate the fundamental devices in QKD systems, namely 1×2 and 2×2 multimode interferometers (MMIs) with low polarization sensitivity and loss. We also improve the splitting balance via parameter optimization based on the particle swarm optimization (PSO) algorithm. Simulation results indicate that the 1×2 (2×2) MMI exhibits a loss of about 0.1 (0.2) dB, along with 0.001 (0.09) dB polarization-dependent loss (PDL) and a splitting ratio nearly 50:50 (±0.3%) at 1550nm, respectively. Test results for the fabricated devices demonstrate that the loss of both MMI types is confined to less than 0.25 dB, their PDL is kept within 0.2 dB, and splitting ratio imbalance is within 1% and exhibits temperature robustness. This research explores compact polarization-insensitive devices via a novel method, thereby laying the foundation for the development of integrated quantum information processing.
Abstract We report on the adaptation of a commercially available fiber-based quantum key distribution (QKD) system with phase-time encoding to free-space operation. The proposed approach minimizes architectural modifications by replacing the single-mode receiving interferometer with a free-space multi-mode delay interferometer, enabling efficient detection of spatially distorted quantum states typical for atmospheric channels. Several interferometer configurations are experimentally investigated, and a multi-mode Michelson interferometer with polarization routing is identified as the optimal solution in terms of interference visibility, loss, and alignment robustness. The impact of chromatic and modal dispersion on phase-time interference is analyzed and shown to be manageable under realistic system parameters. A laboratory QKD experiment demonstrates stable operation with a quantum bit error rate of about 4.5% and a secret key rate of hundreds of bits per second, confirming the feasibility of extending fiber-based QKD platforms to free-space links.
Integrated photonic circuits with many input and output modes are essential in applications ranging from conventional optical telecommunication networks, to the elaboration of photonic qubits in the integrated quantum information framework. In particular, the latter field has been object in the recent years of an increasing interest: the compactness and phase stability of integrated waveguide circuits are enabling experiments unconceivable with bulk-optics set-ups. Linear photonic devices for quantum information are based on quantum and classical interference effects: the desired circuit operation can be achieved only with tight fabrication control on both power repartition in splitting elements and phase retardance in the various paths. Here we report on a novel three-dimensional circuit architecture, made possible by the unique capabilities of femtosecond laser waveguide writing, which enables us to realize integrated multimode devices implementing arbitrary linear transformations. Networks of cascaded directional couplers can be built with independent control on the splitting ratios and the phase shifts in each branch. In detail, we show an arbitrarily designed 5×5 integrated interferometer: characterization with one- and two-photon experiments confirms the accuracy of our fabrication technique. We exploit the fabricated circuit to implement a small instance of the boson-sampling experiments with up to three photons, which is one of the most promising approaches to realize phenomena hard to simulate with classical computers. We will further show how, by studying classical and quantum interference in many random multimode circuits, we may gain deeper insight into the bosonic coalescence phenomenon.
Photonics is a leading approach in realizing future quantum technologies and recently, optical waveguide circuits on silicon chips have demonstrated high levels of miniaturization and performance. Multimode interference (MMI) devices promise a straightforward implementation of compact and robust multiport circuits. Here, we show quantum interference in a 2×2 MMI coupler with visibility of V=95.6±0.9%. We further demonstrate the operation of a 4×4 port MMI device with photon pairs, which exhibits complex quantum interference behaviour. We have developed a new technique to fully characterize such multiport devices, which removes the need for phase-sensitive measurements and may find applications for a wide range of photonic devices. Our results show that MMI devices can operate in the quantum regime with high fidelity and promise substantial simplification and concatenation of photonic quantum circuits. Multimode interference devices could allow the implementation of multiport circuits for quantum technologies. Here, quantum interference is demonstrated in 2×2 and 4×4 multimode interference devices, and a technique is reported to characterize such devices.
Precise temporal delay generation is a key requirement for asymmetric Mach-Zehnder interferometers (aMZIs) used in high-speed quantum key distribution (QKD) receivers. In this work, a compact integrated aMZI architecture based on a silicon nitride on silicon dioxide (Si3N4/SiO2) photonic platform is presented. A 3-dB directional coupler enabling accurate 50:50 power splitting at the 1550 nm telecommunication wavelength is designed and optimized. The coupling length is initially estimated from the effective index difference between the even and odd supermodes and subsequently refined using three-dimensional eigenmode expansion (EME) simulations. The optimized structure employs single-mode Si3N4 waveguides with a cross section of 1 um x 0.4 um, providing a group index close to 2 and enabling accurate delay engineering. Spectral analysis demonstrates stable 3-dB power splitting across the C-band with insertion loss below 0.5 dB and negligible power imbalance, indicating high transmission efficiency and structural symmetry. An integrated Si3N4 aMZI delay line providing a 500 ps optical delay, corresponding to a 2 GHz free spectral range (FSR), is further demonstrated. Simulations show nearly constant group delay across the 190-200 THz frequency range with sub-10 ps variation and a smooth, near-linear phase response. These characteristics enable interference visibility above 0.99, corresponding to an estimated quantum bit error rate (QBER) below 0.5 percent for gigahertz-rate time-bin QKD systems. The wideband linear phase behavior also indicates compatibility with wavelength division multiplexed (WDM) QKD architectures. The results confirm that the proposed Si3N4 integrated aMZI provides a low-loss, dispersion-controlled, and spectrally stable delay solution suitable for scalable chip-scale quantum photonic receivers.