Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optimization of the Atmospheric Annealing Processes for Creation of Group IV-V Centers in Diamond

Baba Tomoya, Iizawa Masatomi, Kimura Kosuke, Airi Kawasaki, Taniguchi Takashi, Miyakawa Masashi, Hanaizumi Osamu, Onoda Shinobu

Published Feb 28, 2024• 0 citations
OpenAlex

Abstract

Diamond point defects have been applied to various quantum devices, including quantum interfaces, quantum memory, and quantum sensing. Recently, group IV-V centers, which consist of group IV ions such as silicon (Si), germanium (Ge), and tin (Sn), along with atomic vacancies (V), are getting high hopes for potential application in quantum devices. This is because group IV-V centers exhibit a longer spin relaxation time T2 on the order of milliseconds at cryogenic temperatures and have bright zero phonon line (ZPL) emission intensities1. The formation process of group IV-V centers can be roughly classified into two steps: (1) generation of interstitial atoms and vacancies by ion implantation, and (2) diffusion of vacancies and substitutional atoms by high-temperature annealing. High-temperature annealing is thought to graphitize the diamond substrate and is typically performed under high pressure. In this presentation, we focus on optimizing the annealing processes in an argon atmosphere at 1800oC. While the optimization of the annealing processes has been actively studied for nitrogen-vacancy (NV) centers, it has not been thoroughly explored for group IV-V centers. Group IV-V centers are constructed with an atom between split vacancies, whereas an NV center is constructed with an interstitial atom and an atomic vacancy. These structural differences could lead to variations in the elementary processes of their formations. Therefore, the optimization processes of annealing conditions need to be re-examined. In this study, we investigated atmospheric annealing processes using HPHT (grown by NIMS) and CVD (Element 6 electric grade) diamonds. Each diamond sample was irradiated with 18 MeV Si, Ge, and Sn ion beams and implanted at about 3 μm from the sample surface. We report efficient formation processes of group IV-V centers at atmospheric pressure, and in a very short time for high-temperature processes compared to the conventional process. In addition, we will discuss the interpretation of the examination result that the number of group IV-V centers formed does not necessarily increase monotonically with annealing time, as shown in Figure 1. This work was supported by JST moonshot R&D Grant Number JPMJMS2062.

Related papers

Demonstration of the SiV¯, GeV¯, and PbV¯ centers in diamond by the atmospheric annealing

Baba Tomoya, Iizawa Masatomi, Kimura Kosuke +5 more

Diamond point defects have been applied to various quantum devices, including quantum interfaces, quantum memory, and quantum sensing. Recently, group IV-V centers, which consist of group IV ions such as silicon (Si), germanium (Ge), and tin (Sn), along with atomic vacancies (V), are getting high hopes for potential application in quantum devices. This is because group IVV centers exhibit a longer spin relaxation time T2 on the order of milliseconds at cryogenic temperatures and have bright zero phonon line (ZPL) emission intensities1 . The formation process of group IV-V centers can be roughly classified into two steps: (1) generation of interstitial atoms and vacancies by ion implantation, and (2) diffusion of vacancies and substitutional atoms by hightemperature annealing. High-temperature annealing is thought to graphitize the diamond substrate and is typically performed under high pressure. In this presentation, we focus on optimizing the annealing processes in an argon atmosphere at 1800oC. While the optimization of the annealing processes has been actively studied for nitrogen-vacancy (NV) centers, it has not been thoroughly explored for group IV-V centers. Group IV-V centers are constructed with an atom between split vacancies, whereas an NV center is constructed with an interstitial atom and an atomic vacancy. These structural differences could lead to variations in the elementary processes of their formations. Therefore, the optimization processes of annealing conditions need to be re-examined. In this study, we investigated atmospheric annealing processes using HPHT (grown by NIMS) and CVD (Element 6 electric grade) diamonds. Each diamond sample was irradiated with 18 MeV Si, Ge, and Sn ion beams and implanted at about 3 μm from the sample surface. We report efficient formation processes of group IV-V centers at atmospheric pressure, and in a very short time for high-temperature processes compared to the conventional process. In addition, we will discuss the interpretation of the examination result that the number of group IV-V centers formed does not necessarily increase monotonically with annealing time, as shown in Figure 1.

•Jul 24, 2024•0 citations

Producing optimized ensembles of nitrogen-vacancy color centers for quantum information applications

Igor Aharonovich, Charles Santori, Barbara A. Fairchild +6 more

Quantum information applications place stringent demands on the development of platforms that can host them. Color centers in diamond have been identified as important media for quantum information processing. Accordingly, the photoluminescence properties of nitrogen-vacancy (N-V) centers in diamond created by implantation and annealing are studied at cryogenic temperatures (below 10 K). We examine high pressure high temperature and chemical vapor deposition synthetic diamonds with varying nitrogen concentration and present an accurate method to estimate the concentration of the (N-V) centers created by ion implantation. The ion irradiation route produced up to 6 ppm of optically active (N-V) centers, while nitrogen implantation yielded up to 3 ppm of optically active (N-V) with 8% conversion efficiency. However, a broadening of the (N-V)− zero phonon line was observed in all samples.

Journal of Applied Physics•Dec 15, 2009•35 citations

Creation of NV centers in HPHT synthetic diamond using electron beam irradiation

石井 秀弥

Negatively charged nitrogen-vacancy (NV-) center in diamond has been paid attention as a highly sensitive detector for magnetic field. The magnetic sensitivity is proportional to the reciprocal of √(NT_2 ), where N is the number of NV centers and T2 is the spin coherence time. To improve the sensitivity, high concentration of NV- centers and extended coherence time are necessary. It is generally known that electron beam irradiation into type-Ib diamond which include high initial concentration of isolated substitutional nitrogen (P1 center) is a useful method to create high concentration of NV- centers. The electron beam irradiation generates vacancies in diamond and the subsequently annealing enables vacancies to diffuse in the lattice. Then diffused vacancies are captured by nitrogen atoms, as a result, NV centers are created. The post annealing has been performed at 1000°C or higher temperature for the purpose of improving the spin properties of NV- centers. In current study, we focused on post-annealing at high temperature to improve magnetic sensitivity of quantum sensing. We investigated annealing temperature and time dependence of the creation behavior of NV centers in type-Ib diamonds to understand appropriate annealing process for enhancing sensitivity of NV- center.

•Jul 24, 2024•0 citations

Tin-Vacancy Quantum Emitters in Diamond

Takayuki Iwasaki, Yoshiyuki Miyamoto, Takashi Taniguchi +4 more

Tin-vacancy ($\mathrm{Sn}\text{\ensuremath{-}}V$) color centers were created in diamond via ion implantation and subsequent high-temperature annealing up to $2100\text{ }\ifmmode^\circ\else\textdegree\fi{}\mathrm{C}$ at 7.7 GPa. The first-principles calculation suggested that a large atom of tin can be incorporated into a diamond lattice with a split-vacancy configuration, in which a tin atom sits on an interstitial site with two neighboring vacancies. The $\mathrm{Sn}\text{\ensuremath{-}}V$ center showed a sharp zero phonon line at 619 nm at room temperature. This line split into four peaks at cryogenic temperatures, with a larger ground state splitting ($\ensuremath{\sim}850\text{ }\text{ }\mathrm{GHz}$) than that of color centers based on other group-IV elements, i.e., silicon-vacancy ($\mathrm{Si}\text{\ensuremath{-}}V$) and germanium-vacancy ($\mathrm{Ge}\text{\ensuremath{-}}V$) centers. The excited state lifetime was estimated, via Hanbury Brown--Twiss interferometry measurements on single $\mathrm{Sn}\text{\ensuremath{-}}V$ quantum emitters, to be $\ensuremath{\sim}5\text{ }\text{ }\mathrm{ns}$. The order of the experimentally obtained optical transition energies, compared with those of $\mathrm{Si}\text{\ensuremath{-}}V$ and $\mathrm{Ge}\text{\ensuremath{-}}V$ centers, was in good agreement with the theoretical calculations.

arXiv:1708.03576•Physical Review Letters•Dec 22, 2017•337 citations

Fine-structure resolution of SiV color centers in CVD nanodiamonds via HPHT annealing

Mary De Feudis, Kin On Ho, Laura Henry +10 more

Diamonds and nanodiamonds (NDs) containing quantum color centers, such as nitrogen-vacancy (NV) centers, have been widely studied in recent years for their promising applications across various fields, including cryptography and telecommunications, medical sciences, and sensing. In the context of sensing, recent studies on color centers such as silicon-vacancy (SiV) and germanium-vacancy (GeV) centers have shown great potential for measuring physical quantities like magnetic fields, temperature, and strain. This is due to their intense zero-phonon line (ZPL) optical signal, which accounts for about 80% of their total luminescence and is characteristic of group-IV color centers (G4V) [1]. In our recent papers, we demonstrated that as-grown CVD NDs containing SiV and GeV centers, featuring luminescent ZPLs and excellent photostability at room temperature, can function effectively as nanosensors under high stress and pressure conditions (up to 180 GPa) [2, 3]. To advance our research, in this work we investigate the optical properties of SiV centers in as-grown NDs at cryogenic temperatures. For SiV centers, which have spin 1/2, the fine structure should become accessible through the Jahn-Teller effect, which lifts the degeneracy at cryogenic temperatures (< 20 K). However, experiments on our as-grown NDs reveal significant spectral broadening even at around 9 K, caused by lattice strain, which prevents access to the optically addressable electronic spin states of the SiV center. To overcome this limitation, we propose an original post-treatment involving high-pressure and high-temperature (HPHT) annealing using the Paris–Edinburgh press. This approach allows the gradual increase of temperature and pressure allows for control over the undesired diamond-to-graphite phase transition. HPHT annealing experiments were conducted at the PSICHE beamline of Synchrotron SOLEIL [4], where X-ray diffraction and tomography analyses enabled precise monitoring of P-T parameters and made it possible for the first time to access single fine-structure transitions of SiV centers in such NDs.References[1] C. Bradac, et al., Nat. Commun. 10, 1 (2019). [2] B. Vindolet, et al., Phys. Rev. B 106, 214109 (2022).[3] M. De Feudis, et al., Adv. Mater. Interfaces 7, 1901408 (2019).[4] L. Henry et al., J. Synchrotron Rad. 29 (2022).

•Oct 20, 2025•0 citations

Tailoring Nitrogen‐Vacancy Centers in Diamond through HPHT Synthesis and Treatment

Yuan‐Han Tang, Xiaoran Zhang, Nan‐Nan Wang +3 more

ABSTRACT With unique optical and spin properties, the negatively charged nitrogen‐vacancy (NV − ) center in diamond has become a leading physical platform for quantum information processing. Fabrication of NV centers involves three steps: introducing nitrogen atoms, creating lattice vacancies, and combining these two types of defects. The final step is typically achieved by high‐temperature annealing, as vacancy migration in diamond is thermally activated above 600°C. Compared to low‐pressure high‐temperature (LPHT) annealing, high‐pressure and high‐temperature (HPHT) treatment allows for much higher annealing temperatures and longer durations, providing new opportunities to optimize key metrics of NV centers. This short review summarizes recent experimental progress in this direction. Dense NV centers with good spin coherence and single NV centers with excellent optical properties have been produced through HPHT growth and post‐treatment of single‐crystal diamonds. In addition, structural imaging, optical characterization, and DFT calculations provide further insights into the dynamics of defect migration under high‐temperature annealing. These results offer new perspectives on the fabrication of color centers in diamond and other wide‐gap semiconductor materials, including silicon carbide and hexagonal boron nitride, for advanced quantum applications.

Advanced Functional Materials•Jan 29, 2026•2 citations
Diamond point defects have been applied to various quantum devices, including quantum interfaces, quantum memory, and quantum sensing. Recently, group IV-V centers, which consist of group IV ions such as silicon (Si), germanium (Ge), and tin (Sn), along with atomic vacancies (V), are getting high hopes for potential application in quantum devices. This is because group IV-V centers exhibit a longer spin relaxation time T2 on the order of milliseconds at cryogenic temperatures and have bright zero phonon line (ZPL) emission intensities1. The formation process of group IV-V centers can be roughly classified into two steps: (1) generation of interstitial atoms and vacancies by ion implantation, and (2) diffusion of vacancies and substitutional atoms by high-temperature annealing. High-temperature annealing is thought to graphitize the diamond substrate and is typically performed under high pressure. In this presentation, we focus on optimizing the annealing processes in an argon atmosphere at 1800oC. While the optimization of the annealing processes has been actively studied for nitrogen-vacancy (NV) centers, it has not been thoroughly explored for group IV-V centers. Group IV-V centers are constructed with an atom between split vacancies, whereas an NV center is constructed with an interstitial atom and an atomic vacancy. These structural differences could lead to variations in the elementary processes of their formations. Therefore, the optimization processes of annealing conditions need to be re-examined. In this study, we investigated atmospheric annealing processes using HPHT (grown by NIMS) and CVD (Element 6 electric grade) diamonds. Each diamond sample was irradiated with 18 MeV Si, Ge, and Sn ion beams and implanted at about 3 μm from the sample surface. We report efficient formation processes of group IV-V centers at atmospheric pressure, and in a very short time for high-temperature processes compared to the conventional process. In addition, we will discuss the interpretation of the examination result that the number of group IV-V centers formed does not necessarily increase monotonically with annealing time, as shown in Figure 1. This work was supported by JST moonshot R&D Grant Number JPMJMS2062.
Diamond point defects have been applied to various quantum devices, including quantum interfaces, quantum memory, and quantum sensing. Recently, group IV-V centers, which consist of group IV ions such as silicon (Si), germanium (Ge), and tin (Sn), along with atomic vacancies (V), are getting high hopes for potential application in quantum devices. This is because group IVV centers exhibit a longer spin relaxation time T2 on the order of milliseconds at cryogenic temperatures and have bright zero phonon line (ZPL) emission intensities1 . The formation process of group IV-V centers can be roughly classified into two steps: (1) generation of interstitial atoms and vacancies by ion implantation, and (2) diffusion of vacancies and substitutional atoms by hightemperature annealing. High-temperature annealing is thought to graphitize the diamond substrate and is typically performed under high pressure. In this presentation, we focus on optimizing the annealing processes in an argon atmosphere at 1800oC. While the optimization of the annealing processes has been actively studied for nitrogen-vacancy (NV) centers, it has not been thoroughly explored for group IV-V centers. Group IV-V centers are constructed with an atom between split vacancies, whereas an NV center is constructed with an interstitial atom and an atomic vacancy. These structural differences could lead to variations in the elementary processes of their formations. Therefore, the optimization processes of annealing conditions need to be re-examined. In this study, we investigated atmospheric annealing processes using HPHT (grown by NIMS) and CVD (Element 6 electric grade) diamonds. Each diamond sample was irradiated with 18 MeV Si, Ge, and Sn ion beams and implanted at about 3 μm from the sample surface. We report efficient formation processes of group IV-V centers at atmospheric pressure, and in a very short time for high-temperature processes compared to the conventional process. In addition, we will discuss the interpretation of the examination result that the number of group IV-V centers formed does not necessarily increase monotonically with annealing time, as shown in Figure 1.
Quantum information applications place stringent demands on the development of platforms that can host them. Color centers in diamond have been identified as important media for quantum information processing. Accordingly, the photoluminescence properties of nitrogen-vacancy (N-V) centers in diamond created by implantation and annealing are studied at cryogenic temperatures (below 10 K). We examine high pressure high temperature and chemical vapor deposition synthetic diamonds with varying nitrogen concentration and present an accurate method to estimate the concentration of the (N-V) centers created by ion implantation. The ion irradiation route produced up to 6 ppm of optically active (N-V) centers, while nitrogen implantation yielded up to 3 ppm of optically active (N-V) with 8% conversion efficiency. However, a broadening of the (N-V)− zero phonon line was observed in all samples.
Negatively charged nitrogen-vacancy (NV-) center in diamond has been paid attention as a highly sensitive detector for magnetic field. The magnetic sensitivity is proportional to the reciprocal of √(NT_2 ), where N is the number of NV centers and T2 is the spin coherence time. To improve the sensitivity, high concentration of NV- centers and extended coherence time are necessary. It is generally known that electron beam irradiation into type-Ib diamond which include high initial concentration of isolated substitutional nitrogen (P1 center) is a useful method to create high concentration of NV- centers. The electron beam irradiation generates vacancies in diamond and the subsequently annealing enables vacancies to diffuse in the lattice. Then diffused vacancies are captured by nitrogen atoms, as a result, NV centers are created. The post annealing has been performed at 1000°C or higher temperature for the purpose of improving the spin properties of NV- centers. In current study, we focused on post-annealing at high temperature to improve magnetic sensitivity of quantum sensing. We investigated annealing temperature and time dependence of the creation behavior of NV centers in type-Ib diamonds to understand appropriate annealing process for enhancing sensitivity of NV- center.
Tin-vacancy ($\mathrm{Sn}\text{\ensuremath{-}}V$) color centers were created in diamond via ion implantation and subsequent high-temperature annealing up to $2100\text{ }\ifmmode^\circ\else\textdegree\fi{}\mathrm{C}$ at 7.7 GPa. The first-principles calculation suggested that a large atom of tin can be incorporated into a diamond lattice with a split-vacancy configuration, in which a tin atom sits on an interstitial site with two neighboring vacancies. The $\mathrm{Sn}\text{\ensuremath{-}}V$ center showed a sharp zero phonon line at 619 nm at room temperature. This line split into four peaks at cryogenic temperatures, with a larger ground state splitting ($\ensuremath{\sim}850\text{ }\text{ }\mathrm{GHz}$) than that of color centers based on other group-IV elements, i.e., silicon-vacancy ($\mathrm{Si}\text{\ensuremath{-}}V$) and germanium-vacancy ($\mathrm{Ge}\text{\ensuremath{-}}V$) centers. The excited state lifetime was estimated, via Hanbury Brown--Twiss interferometry measurements on single $\mathrm{Sn}\text{\ensuremath{-}}V$ quantum emitters, to be $\ensuremath{\sim}5\text{ }\text{ }\mathrm{ns}$. The order of the experimentally obtained optical transition energies, compared with those of $\mathrm{Si}\text{\ensuremath{-}}V$ and $\mathrm{Ge}\text{\ensuremath{-}}V$ centers, was in good agreement with the theoretical calculations.
Diamonds and nanodiamonds (NDs) containing quantum color centers, such as nitrogen-vacancy (NV) centers, have been widely studied in recent years for their promising applications across various fields, including cryptography and telecommunications, medical sciences, and sensing. In the context of sensing, recent studies on color centers such as silicon-vacancy (SiV) and germanium-vacancy (GeV) centers have shown great potential for measuring physical quantities like magnetic fields, temperature, and strain. This is due to their intense zero-phonon line (ZPL) optical signal, which accounts for about 80% of their total luminescence and is characteristic of group-IV color centers (G4V) [1]. In our recent papers, we demonstrated that as-grown CVD NDs containing SiV and GeV centers, featuring luminescent ZPLs and excellent photostability at room temperature, can function effectively as nanosensors under high stress and pressure conditions (up to 180 GPa) [2, 3]. To advance our research, in this work we investigate the optical properties of SiV centers in as-grown NDs at cryogenic temperatures. For SiV centers, which have spin 1/2, the fine structure should become accessible through the Jahn-Teller effect, which lifts the degeneracy at cryogenic temperatures (< 20 K). However, experiments on our as-grown NDs reveal significant spectral broadening even at around 9 K, caused by lattice strain, which prevents access to the optically addressable electronic spin states of the SiV center. To overcome this limitation, we propose an original post-treatment involving high-pressure and high-temperature (HPHT) annealing using the Paris–Edinburgh press. This approach allows the gradual increase of temperature and pressure allows for control over the undesired diamond-to-graphite phase transition. HPHT annealing experiments were conducted at the PSICHE beamline of Synchrotron SOLEIL [4], where X-ray diffraction and tomography analyses enabled precise monitoring of P-T parameters and made it possible for the first time to access single fine-structure transitions of SiV centers in such NDs.References[1] C. Bradac, et al., Nat. Commun. 10, 1 (2019). [2] B. Vindolet, et al., Phys. Rev. B 106, 214109 (2022).[3] M. De Feudis, et al., Adv. Mater. Interfaces 7, 1901408 (2019).[4] L. Henry et al., J. Synchrotron Rad. 29 (2022).
ABSTRACT With unique optical and spin properties, the negatively charged nitrogen‐vacancy (NV − ) center in diamond has become a leading physical platform for quantum information processing. Fabrication of NV centers involves three steps: introducing nitrogen atoms, creating lattice vacancies, and combining these two types of defects. The final step is typically achieved by high‐temperature annealing, as vacancy migration in diamond is thermally activated above 600°C. Compared to low‐pressure high‐temperature (LPHT) annealing, high‐pressure and high‐temperature (HPHT) treatment allows for much higher annealing temperatures and longer durations, providing new opportunities to optimize key metrics of NV centers. This short review summarizes recent experimental progress in this direction. Dense NV centers with good spin coherence and single NV centers with excellent optical properties have been produced through HPHT growth and post‐treatment of single‐crystal diamonds. In addition, structural imaging, optical characterization, and DFT calculations provide further insights into the dynamics of defect migration under high‐temperature annealing. These results offer new perspectives on the fabrication of color centers in diamond and other wide‐gap semiconductor materials, including silicon carbide and hexagonal boron nitride, for advanced quantum applications.