In this work, a combination of gaseous plasma media and metamaterials is employed to achieve active control of electromagnetic waves in the microwave regime for realizing an electromagnetically induced transparency (EIT) response. A reconfigurable plasma device integrated with metallic resonators is investigated, in which the ionization state of the enclosed gas is controlled for active modulation of the coupling conditions. Strong reflection is observed in the frequency range of 2.17-2.61 GHz (at −1 dB), while a high quality factor (Q), a sharp transmission band is obtained at 2.45 GHz with a bandwidth of 33 MHz (fractional bandwidth of 1.35%), corresponding to a quality factor of approximately 74.2. This approach demonstrates a promising pathway toward the development of real-time and tunable devices based on EIT principles.
In this work, a combination of gaseous plasma media and metamaterials is employed to achieve active control of electromagnetic waves in the microwave regime for realizing an electromagnetically induced transparency (EIT) response. A reconfigurable plasma device integrated with metallic resonators is investigated, in which the ionization state of the enclosed gas is controlled for active modulation of the coupling conditions. Strong reflection is observed in the frequency range of 2.17-2.61 GHz (at −1 dB), while a high quality factor (Q), a sharp transmission band is obtained at 2.45 GHz with a bandwidth of 33 MHz (fractional bandwidth of 1.35%), corresponding to a quality factor of approximately 74.2. This approach demonstrates a promising pathway toward the development of real-time and tunable devices based on EIT principles.
Based on solid-state plasma (SSP), an electromagnetically induced transparent (EIT) metamaterial is proposed. Simulations illustrate that the given metamaterial has the characteristics of adjustment, polarization insensitivity, and low dissipation. Because SSP can be coordinated in state I, the ideal transmittance frequency band can cover 8.0335–9.02531 GHz (a narrow band). If the regulatory status is switched to state II, that frequency region will alter to 9.7982–12.9275 GHz (a broad band). As SSP can be switched back and forth between states I and II under actual demand, the tailored EIT metamaterial can be achieved. The maximum group delays of state I and state II are 0.9437 ns and 0.5546 ns, respectively, and the maximum group refractive indices are 526.60 and 300.45, respectively, which conforms to its slow light characteristic. Regardless of how the polarization angle changes, the two transmission valleys of state I are at 7.9172 GHz and 10.4446 GHz, and the transmission peak is situated at 8.2091 GHz, and those values of state II are 9.3777 GHz, 13.9600 GHz, and 10.1920 GHz, respectively, which proves that the obtained EIT is polarization independent and also has a low dissipation factor. Such an EIT metamaterial has excellent properties in sensing, communication, slow light, and other fields.
Abstract Based on the solid-state plasma (SSP), a metamaterial analog of electromagnetically induced transparency (EIT-like) with superior properties is theoretically proposed, including tunability, a large group index, and delay-bandwidth product (DBP), polarization independence, and low-loss. By exciting different specific parts of the SSP, the EIT-like peak frequency switches from 8.518 GHz with 90.92% transmissivity in state I to 11.26 GHz with 93.76% transmissivity in state II, i.e. a 2.742 GHz shift. Meanwhile, the metamaterial has 0.679 ns or 1.314 ns group delay, 453 or 876.1 group index, and 0.422 or 1 DBP in state I or III. Additionally, the transmission curves are the same under the circular polarization waves or linear polarization waves at any angle. The low-loss feature is likewise demonstrated. Therefore, the EIT-like metamaterial has superior properties for related applications, especially in slow light, sensing, switching, and communication.
In this paper, an electromagnetically induced transparency metamaterial simultaneously coupled with the incident electric and magnetic fields is designed and presented theoretically, whereas its reconfigurability, slow-wave effect, low-loss, and polarization insensitivity are analyzed and discussed principally. Based on the tunable solid-state plasma, there is a transmission peak with a 92.06% transmission at 0.544 THz in State 1 and a transmission peak with a 92.84% transmission at 0.7535 THz in State 2, thus achieving a frequency shift of 0.2085 THz. The maximum group delay, group index, and delay-bandwidth product in State 1 or 2, which are 723.7 ps or 494.7 ps, 1024.1 or 700.1, and 48.5 or 36.1, respectively, and the excellent slow-wave effects are discussed. In addition, the low-loss and polarization insensitivity are realized by rotating the split-ring resonators 180° and twisting the planar structure 90°. Considering the unique features of the designed metamaterial, it can be extensively applied to slow-light devices, communication, sensors, and nonlinear devices.
The electromagnetically induced transparency (EIT), which is a result of destructive interference between different excitation paths in a three-energy-level atomic medium, makes opaque probe light transparent over a range of frequencies. As this EIT effect is usually accompanied with strong dispersion, it has potential applications such as slow light propagation, optical buffering, nonlinear optics, optical sensing, etc. However, for conventional quantum EIT effect which requires stable gas lasers and low temperature environment, the implementation of EIT in chip-scale applications is severely hampered by the scathing experimental requirements. Recently, the EIT-like effect in metamaterials, which are constructed by designing the artificial subwavelength functional elements and arranging the spatial sequences, attracts tremendous attention because of its advantages, such as room temperature manipulability, large bandwidth, and small sizes. In addition, the high-quality factor(Q) value obtained by EIT-like effect has great significance in designing the metamaterial-based devices. In this paper, we design an EIT-like metamaterial with such a structure. The unit cell of the proposed metamaterial is constructed by two asymmetric silicon blocks embedded on a silicon dioxide substrate. Meanwhile, we analyze its optical properties and EIT-like effects by using three-dimension (3D) FDTD method. Based on the coupled Lorentz model, the EIT-like effect of the designed metamaterial is investigated. Then, by employing the electric field distribution on the surface of the metamaterial, and combining with the three-level atomic system, the mechanism of the EIT-like effect is analyzed in detail. We find that the EIT-like effect in the proposed metamaterial has high Q value (Q ≈ 8616) and the high transmission (T = 96%). By changing the length of the silicon block to destroy the asymmetry of the metamaterial structure, an active tuning EIT-like effect is realized. Furthermore, the metamaterial structure has the advantages of low loss, easy preparation, and active-controllability. This study represents an innovative approach to designing the EIT-like metamaterial, which is expected to be useful for designing active tunable slow-light devices and highly sensitive optical sensors.
Electromagnetically induced transparency is an optical phenomenon that is characterized by the elimination of the effect of a medium on a propagating beam of electromagnetic radiation in a specific frequency band. In this study, EIT was investigated at a proposed metamaterial with the dimensions milimeter and in the area of frequency of GHz. The computation results indicated that EIT with high transmission rate and high Q factor occurs in certain frequencies by breaking the symmetry in this structure. The sensitivity studies showed that the use of silver in the structure increases the quality factor so significantly that this quantity reaches 338 for gold and copper, while it reaches 677 for silver. In addition, By reducing the temperature, the transmission rate in the structure increases and reaches acceptable degree 98%. This structure can be an appropriate option for slow light usages, and it can be utilized for light amplification in microwave structures.