Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Automatiserad Mångkroppsanalys av Punktdefekter

Petter Johansson

Published Jan 1, 2026• 0 citations
OpenAlex

Abstract

Point defects in crystals have been shown to be useful as building blocks for quantum technology. In the search for new defects with properties better suited for specific applications, a detailed understanding of their many-body state structure is needed. Accurately modeling the states cannot be done using standard density functional theory (DFT) methods, and true many-body methods are computationally expensive. We develop a general computational tool for constructing many-body defect states, and for estimating their energies from constrained occupation DFT calculations. The tool is used to construct configuration state functions (CSF) for active spaces of orbitals in any of the 32 point groups. The CSF were constructed for several defects, and the results agree with states reported in the literature. The many-body energies are estimated by first expressing single-determinant energies as linear combinations of the unknown CSF energies and then solving the resulting system of equations. We applied this method to estimate the many-body energies for the nitrogen-vacancy (NV) center and the sodium substitution in diamond. For the NV center, the ordering of CSF energies was found to be sensitive to the specific DFT settings. The many-body states of the sodium substitution in diamond have not been mapped out previously; we present them here. The developed tool simplifies complex group-theory calculations, enabling the mapping of excited states of numerous point defects, potentially offering a cheaper alternative to true many-body methods for high-throughput screening of candidates for quantum technology.

Related papers

Quantum embedding methods for correlated excited states of point defects: Case studies and challenges

Lukas Muechler, Danis I. Badrtdinov, Alexander Hampel +3 more

A quantitative description of the excited electronic states of point defects and impurities is crucial for understanding materials properties, and possible applications of defects in quantum technologies. This is a considerable challenge for computational methods, since Kohn-Sham density functional theory (DFT) is inherently a ground-state theory, while higher-level methods are often too computationally expensive for defect systems. Recently, embedding approaches have been applied that treat defect states with many-body methods, while using DFT to describe the bulk host material. We implement such an embedding method, based on Wannierization of defect orbitals and the constrained random-phase approximation approach, and perform systematic characterization of the method for three distinct systems with current technological relevance: a carbon dimer replacing a B and N pair in bulk hexagonal BN (${\mathrm{C}}_{\text{B}}{\mathrm{C}}_{\text{N}}$), the negatively charged nitrogen-vacancy center in diamond (${\mathrm{NV}}^{\ensuremath{-}}$), and an Fe impurity on the Al site in wurtzite AlN (${\text{Fe}}_{\text{Al}}$). In the context of these test-case defects, we demonstrate that crucial considerations of the methodology include convergence of the bulk screening of the active-space Coulomb interaction, the choice of exchange-correlation functional for the initial DFT calculation, and the treatment of the ``double-counting'' correction. For ${\mathrm{C}}_{\text{B}}{\mathrm{C}}_{\text{N}}$ we show that the embedding approach gives many-body states in agreement with analytical results on the Hubbard dimer model, which allows us to elucidate the effects of the DFT functional and double-counting correction. For the ${\mathrm{NV}}^{\ensuremath{-}}$ center, our method demonstrates good quantitative agreement with experiments for the zero-phonon line of the triplet-triplet transition. Finally, we illustrate challenges associated with this method for determining the energies and orderings of the complex spin multiplets in ${\text{Fe}}_{\text{Al}}$.

arXiv:2105.08705•Physical review. B./Physical review. B•Jun 6, 2022•69 citations

Calculation of the energies of the multideterminant states of the nitrogen vacancy center in diamond with quantum Monte Carlo

Kristoffer Simula, Ilja Makkonen

Certain point defects in solids can efficiently be used as qubits for applications in quantum technology. They have spin states that are initializable, readable, robust, and can be manipulated optically. New theoretical methods are needed to find the best host materials and defect configurations. Most methods proposed so far rely either on cluster models or restrict the many-body treatment of the defects to a subspace of single-particle orbitals. We explore best practices and theory for the use of quantum Monte Carlo to predict the excitation spectra for spin defects, by using the negatively charged nitrogen vacancy (${\mathrm{NV}}^{\ensuremath{-}}$) center in diamond as a test system. Quantum Monte Carlo can be used to explicitly simulate electronic correlations with larger systems and sets of orbitals than previous methods due to favorable scaling with respect to system size and computing power. We consider different trial wave functions for variational and diffusion Monte Carlo methods, explore the nodal surface errors of the ground and excited state wave functions, and study whether the variational principle holds for the excited states. We compute the vertical excitation energies in different simulation cell sizes and extrapolate to infinite system size, and include backflow corrections to the extrapolated energies. The final results for vertical excitation energies are found to overestimate the experimental estimates, but the triplet-to-triplet and singlet-to-singlet transitions are accurate against experiment. Finally, we list further developments for QMC needed to address the problem of accurately predicting structural and spin properties of the solid-state defects.

arXiv:2303.09851•Physical review. B./Physical review. B•Sep 15, 2023•12 citations

Multiconfigurational nature of electron correlation within nitrogen vacancy centers in diamond

Yilin Chen, Tonghuan Jiang, Haoxiang Chen +5 more

Diamond is a solid-state platform used to develop quantum technologies, but it has been a long-standing problem that the current understanding of quantum states of nitrogen vacancy (NV) centers in diamond is mostly limited to single-electron pictures. Here, we combine the full configuration interaction quantum Monte Carlo method and the density-matrix functional embedding theory to achieve an accurate description of the many-body quantum states of such defects in diamond. More than 30 electrons and 130 molecular orbitals are correlated, revealing the multiconfigurational nature of the wave functions of the many-body quantum states therein. Such a description explains puzzling experimental measurements in intersystem crossing and charge-state transitions at NV centers in diamond. The calculations not only reproduce the available experimental measurements of the energy gaps between quantum states but also provide benchmarks for states that are still subject to considerable uncertainty.

arXiv:2302.13730•Physical review. B./Physical review. B•Jul 10, 2023•14 citations

Quantum Monte Carlo assessment of embedding for for strongly correlated defects: interplay between mean-field starting point and interactions

Kevin G. Kleiner, Sonali Joshi, Rohan Joshi +5 more

Point defects are of interest for many applications, from quantum sensing to modifying bulk properties of materials. Because of their localized orbitals, the electronic states are often strongly correlated, which has led to a proliferation of quantum embedding techniques to treat this correlation. In these techniques, most of the one-body states are treated with a weakly correlated theory such as density functional theory, and certain one-body states are singled out as an active space to be treated using an effective interaction. We assess these techniques for iron and chromium defects in aluminum nitride using quantum Monte Carlo (QMC) calculations on identical Hamiltonians. For these systems, we find the dominant errors in the embedding arise from the one-body crystal-field splitting in the d orbitals inherited from density functional theory (DFT), rather than double counting corrections, with the screened interactions also affected by the DFT orbitals. Strikingly, the best double counting recipe is opposite in these two cases. Because excitation energies can agree while the underlying wave functions do not, diagnosing these errors requires detailed information about the many-body wave functions, which QMC provides.

arXiv:2505.00845•May 1, 2025•7 citations

Identifying high performance spectrally-stable quantum defects in diamond

Yihuang Xiong, Yizhi Zhu, Shay McBride +2 more

Point defects in semiconductors are becoming central to quantum technologies. They can be used as spin qubits interfacing with photons, which are fundamental for building quantum networks. Currently, the most prominent quantum defect in diamond is the nitrogen-vacancy (NV) center. However, it suffers from spectral diffusion that negatively impacts optical coherence and is due to the coupling of the emission energy with uncontrolled electric fields. The group IV vacancy complexes on the other hand have shown to be significantly more spectrally-stable as they are centrosymmetric and thus immune to the linear Stark shift. They however suffer from several issues ranging from low operation temperature to low optical efficiency due to dark states and difficulty in stabilizing the right defect charge state. Here we search for alternative to the group IV vacancy complex in diamond by systematically evaluating all possible vacancy complex using high-throughput first-principles computational screening. We identify the defects that combine centrosymmetry, emission in the visible range, as well as favorable and achievable electronic structure promoting higher operation temperature and defect levels well within the band gap. We find Zn$V^{-2}$ to be especially appealing.

arXiv:2504.11598•Apr 15, 2025•1 citation

Quantum properties of NV centers in diamond: towards optimized industrial protocols

Léonard Desvignes, Ovidiu Brinza, Alexandre Tallaire +5 more

Because of their high sensitivity, quantum materials are extremely promising for new technologies. The main challenge lies in maintaining a sufficiently quantum coherence times for quantum computation or quantum sensing systems. NV centers in diamond which are point defects consisting of a substitutional nitrogen atom neighboring an atomic vacancy, where an electron pair can reside in a triplet state – are ideal candidates for the development of industrial-scale quantum systems. These spin states exhibit ms-long coherence times at room temperature and can be manipulated optically, hence opening interesting perspectives for sending magnetic fields with high sensitivity1.At HiQuTe Diamond, we take up the challenge of mastering the entire nitrogen-doped diamond production chain synthesized by Microwave Plasma-Assisted Chemical Vapor Deposition (MPACVD). We aim at creating affordable diamonds specially engineered to achieve long coherence times with high NV density and high doping uniformity. This quest require to overcome the impact of several external factors that contribute to electron spin decoherence. First, the chemical composition of the diamond, specifically the types and concentrations of impurities within the diamond matrix (such as substitutional nitrogen NS, NV centres, mono-vacancies and clusters, hydrogen, etc.), as well as their electrical charge states (NS⁰, NS⁺, NV⁰, NV⁻) should be carefully controlled. Thanks to extensive scientific research conducted over the past decade, combined with our own R&D efforts, we are now able to quantify these parameters using experimental techniques compatible with industrial applications (Raman and UV-Vis spectroscopy) and compare our results with key performance indicators2. Second, we study the relationship between coherence (T2*) and strain inhomogeneities in our diamond layers, which we analyse using birefringence measurements. Our findings demonstrate our capability to produce CVD diamond layers with reduced strain and extended defect and confirm that strain could be a critical limiting factor for T2*.In this poster, I will review the efforts carried out at HiQuTe Diamond to develop specific material that is well suited for quantum sensing applications.References1.Barry, J. F., Schloss, J. M., Bauch, E., Turner, M. J., Hart, C. A., Pham, L. M., & Walsworth, R. L. (2020). Sensitivity optimization for NV-diamond magnetometry. Reviews of Modern Physics, 92(1), 015004.2.Langer, J. (2022). Quantum-grade diamond for cavity-based solutions. Fraunhofer Verlag.

•Mar 19, 2025•0 citations
Point defects in crystals have been shown to be useful as building blocks for quantum technology. In the search for new defects with properties better suited for specific applications, a detailed understanding of their many-body state structure is needed. Accurately modeling the states cannot be done using standard density functional theory (DFT) methods, and true many-body methods are computationally expensive. We develop a general computational tool for constructing many-body defect states, and for estimating their energies from constrained occupation DFT calculations. The tool is used to construct configuration state functions (CSF) for active spaces of orbitals in any of the 32 point groups. The CSF were constructed for several defects, and the results agree with states reported in the literature. The many-body energies are estimated by first expressing single-determinant energies as linear combinations of the unknown CSF energies and then solving the resulting system of equations. We applied this method to estimate the many-body energies for the nitrogen-vacancy (NV) center and the sodium substitution in diamond. For the NV center, the ordering of CSF energies was found to be sensitive to the specific DFT settings. The many-body states of the sodium substitution in diamond have not been mapped out previously; we present them here. The developed tool simplifies complex group-theory calculations, enabling the mapping of excited states of numerous point defects, potentially offering a cheaper alternative to true many-body methods for high-throughput screening of candidates for quantum technology.
A quantitative description of the excited electronic states of point defects and impurities is crucial for understanding materials properties, and possible applications of defects in quantum technologies. This is a considerable challenge for computational methods, since Kohn-Sham density functional theory (DFT) is inherently a ground-state theory, while higher-level methods are often too computationally expensive for defect systems. Recently, embedding approaches have been applied that treat defect states with many-body methods, while using DFT to describe the bulk host material. We implement such an embedding method, based on Wannierization of defect orbitals and the constrained random-phase approximation approach, and perform systematic characterization of the method for three distinct systems with current technological relevance: a carbon dimer replacing a B and N pair in bulk hexagonal BN (CBCN{\mathrm{C}}_{\text{B}}{\mathrm{C}}_{\text{N}}CB​CN​), the negatively charged nitrogen-vacancy center in diamond (${\mathrm{NV}}^{\ensuremath{-}}$), and an Fe impurity on the Al site in wurtzite AlN (FeAl{\text{Fe}}_{\text{Al}}FeAl​). In the context of these test-case defects, we demonstrate that crucial considerations of the methodology include convergence of the bulk screening of the active-space Coulomb interaction, the choice of exchange-correlation functional for the initial DFT calculation, and the treatment of the ``double-counting'' correction. For CBCN{\mathrm{C}}_{\text{B}}{\mathrm{C}}_{\text{N}}CB​CN​ we show that the embedding approach gives many-body states in agreement with analytical results on the Hubbard dimer model, which allows us to elucidate the effects of the DFT functional and double-counting correction. For the ${\mathrm{NV}}^{\ensuremath{-}}$ center, our method demonstrates good quantitative agreement with experiments for the zero-phonon line of the triplet-triplet transition. Finally, we illustrate challenges associated with this method for determining the energies and orderings of the complex spin multiplets in FeAl{\text{Fe}}_{\text{Al}}FeAl​.
Certain point defects in solids can efficiently be used as qubits for applications in quantum technology. They have spin states that are initializable, readable, robust, and can be manipulated optically. New theoretical methods are needed to find the best host materials and defect configurations. Most methods proposed so far rely either on cluster models or restrict the many-body treatment of the defects to a subspace of single-particle orbitals. We explore best practices and theory for the use of quantum Monte Carlo to predict the excitation spectra for spin defects, by using the negatively charged nitrogen vacancy (${\mathrm{NV}}^{\ensuremath{-}}$) center in diamond as a test system. Quantum Monte Carlo can be used to explicitly simulate electronic correlations with larger systems and sets of orbitals than previous methods due to favorable scaling with respect to system size and computing power. We consider different trial wave functions for variational and diffusion Monte Carlo methods, explore the nodal surface errors of the ground and excited state wave functions, and study whether the variational principle holds for the excited states. We compute the vertical excitation energies in different simulation cell sizes and extrapolate to infinite system size, and include backflow corrections to the extrapolated energies. The final results for vertical excitation energies are found to overestimate the experimental estimates, but the triplet-to-triplet and singlet-to-singlet transitions are accurate against experiment. Finally, we list further developments for QMC needed to address the problem of accurately predicting structural and spin properties of the solid-state defects.
Diamond is a solid-state platform used to develop quantum technologies, but it has been a long-standing problem that the current understanding of quantum states of nitrogen vacancy (NV) centers in diamond is mostly limited to single-electron pictures. Here, we combine the full configuration interaction quantum Monte Carlo method and the density-matrix functional embedding theory to achieve an accurate description of the many-body quantum states of such defects in diamond. More than 30 electrons and 130 molecular orbitals are correlated, revealing the multiconfigurational nature of the wave functions of the many-body quantum states therein. Such a description explains puzzling experimental measurements in intersystem crossing and charge-state transitions at NV centers in diamond. The calculations not only reproduce the available experimental measurements of the energy gaps between quantum states but also provide benchmarks for states that are still subject to considerable uncertainty.
Point defects are of interest for many applications, from quantum sensing to modifying bulk properties of materials. Because of their localized orbitals, the electronic states are often strongly correlated, which has led to a proliferation of quantum embedding techniques to treat this correlation. In these techniques, most of the one-body states are treated with a weakly correlated theory such as density functional theory, and certain one-body states are singled out as an active space to be treated using an effective interaction. We assess these techniques for iron and chromium defects in aluminum nitride using quantum Monte Carlo (QMC) calculations on identical Hamiltonians. For these systems, we find the dominant errors in the embedding arise from the one-body crystal-field splitting in the d orbitals inherited from density functional theory (DFT), rather than double counting corrections, with the screened interactions also affected by the DFT orbitals. Strikingly, the best double counting recipe is opposite in these two cases. Because excitation energies can agree while the underlying wave functions do not, diagnosing these errors requires detailed information about the many-body wave functions, which QMC provides.
Point defects in semiconductors are becoming central to quantum technologies. They can be used as spin qubits interfacing with photons, which are fundamental for building quantum networks. Currently, the most prominent quantum defect in diamond is the nitrogen-vacancy (NV) center. However, it suffers from spectral diffusion that negatively impacts optical coherence and is due to the coupling of the emission energy with uncontrolled electric fields. The group IV vacancy complexes on the other hand have shown to be significantly more spectrally-stable as they are centrosymmetric and thus immune to the linear Stark shift. They however suffer from several issues ranging from low operation temperature to low optical efficiency due to dark states and difficulty in stabilizing the right defect charge state. Here we search for alternative to the group IV vacancy complex in diamond by systematically evaluating all possible vacancy complex using high-throughput first-principles computational screening. We identify the defects that combine centrosymmetry, emission in the visible range, as well as favorable and achievable electronic structure promoting higher operation temperature and defect levels well within the band gap. We find ZnV−2V^{-2}V−2 to be especially appealing.
Because of their high sensitivity, quantum materials are extremely promising for new technologies. The main challenge lies in maintaining a sufficiently quantum coherence times for quantum computation or quantum sensing systems. NV centers in diamond which are point defects consisting of a substitutional nitrogen atom neighboring an atomic vacancy, where an electron pair can reside in a triplet state – are ideal candidates for the development of industrial-scale quantum systems. These spin states exhibit ms-long coherence times at room temperature and can be manipulated optically, hence opening interesting perspectives for sending magnetic fields with high sensitivity1.At HiQuTe Diamond, we take up the challenge of mastering the entire nitrogen-doped diamond production chain synthesized by Microwave Plasma-Assisted Chemical Vapor Deposition (MPACVD). We aim at creating affordable diamonds specially engineered to achieve long coherence times with high NV density and high doping uniformity. This quest require to overcome the impact of several external factors that contribute to electron spin decoherence. First, the chemical composition of the diamond, specifically the types and concentrations of impurities within the diamond matrix (such as substitutional nitrogen NS, NV centres, mono-vacancies and clusters, hydrogen, etc.), as well as their electrical charge states (NS⁰, NS⁺, NV⁰, NV⁻) should be carefully controlled. Thanks to extensive scientific research conducted over the past decade, combined with our own R&D efforts, we are now able to quantify these parameters using experimental techniques compatible with industrial applications (Raman and UV-Vis spectroscopy) and compare our results with key performance indicators2. Second, we study the relationship between coherence (T2*) and strain inhomogeneities in our diamond layers, which we analyse using birefringence measurements. Our findings demonstrate our capability to produce CVD diamond layers with reduced strain and extended defect and confirm that strain could be a critical limiting factor for T2*.In this poster, I will review the efforts carried out at HiQuTe Diamond to develop specific material that is well suited for quantum sensing applications.References1.Barry, J. F., Schloss, J. M., Bauch, E., Turner, M. J., Hart, C. A., Pham, L. M., & Walsworth, R. L. (2020). Sensitivity optimization for NV-diamond magnetometry. Reviews of Modern Physics, 92(1), 015004.2.Langer, J. (2022). Quantum-grade diamond for cavity-based solutions. Fraunhofer Verlag.