Protocol PHY‑12 v1.1 implements the unified metrological framework of Protocol 9.0 to test the claimed ability of human intention to alter the fluorescence properties of colloidal quantum dots (QDs). Version 1.1 introduces a common laser source with a beamsplitter for excitation, focus‑position monitoring, and a multivariate statistical approach (instead of univariate FDR) to handle multiple correlated observables. The protocol is designed for specialised optical laboratories with stringent control of QD stability, temperature, and environmental noise. Triple blinding, calibration perturbations, multiverse analysis, and a Minimum Detectable Effect (MDE) of 5σ above the Allan‑derived noise floor establish an uncompromising standard. The aggregation test is moved to a separate validation procedure.
Protocol PHY‑12 v1.1 implements the unified metrological framework of Protocol 9.0 to test the claimed ability of human intention to alter the fluorescence properties of colloidal quantum dots (QDs). Version 1.1 introduces a common laser source with a beamsplitter for excitation, focus‑position monitoring, and a multivariate statistical approach (instead of univariate FDR) to handle multiple correlated observables. The protocol is designed for specialised optical laboratories with stringent control of QD stability, temperature, and environmental noise. Triple blinding, calibration perturbations, multiverse analysis, and a Minimum Detectable Effect (MDE) of 5σ above the Allan‑derived noise floor establish an uncompromising standard. The aggregation test is moved to a separate validation procedure.
Protocol PHY‑11 v1.1 implements the unified metrological framework of Protocol 9.0 to test the claimed ability of human intention to alter the emission spectrum of a laser. Version 1.1 introduces independent wavelength meters for each laser, acoustic enclosures and increased operator distance (5 m), real‑time monitoring of back‑reflections, and a hysteresis test in the pilot phase to verify that the system is free from irreversible drifts. The protocol is designed for specialised optical laboratories with ultra‑stable lasers, high‑precision frequency metrology, and rigorous environmental control. Triple blinding, calibration perturbations, multiverse analysis, and a Minimum Detectable Effect (MDE) of 5σ above the Allan‑derived noise floor establish an uncompromising standard.
Protocol PHY‑07 implements the unified metrological framework of Protocol 9.0 to test the claimed ability of human intention to remotely alter the dynamics of a macroscopic pendulum. Version 2.0 incorporates a common invar baseplate for both pendulums to suppress differential vibrations, electrostatic shielding to eliminate charge‑induced artifacts, and a mandatory pilot phase with a fictitious operator to validate that the differential noise floor is indeed below the pre‑registered MDE. The protocol is designed for a specialised laboratory environment with active vibration isolation, high vacuum, and precision optical metrology. Triple blinding, calibration impulses, and multiverse analysis establish an uncompromising standard. The aim is detection of reproducible deviations from baseline or establishment of a quantitative upper bound on anomalous coupling.
Protocol PHY‑03 implements the unified metrological framework of Protocol 9.0 for testing claimed intention‑based modulation of radioactive decay rates. Using two matched long‑lived sources, triple blinding, and a physically isolated dummy, the protocol targets a Minimum Detectable Effect (MDE) of 5σ above the combined Poisson‑Allan noise floor. Version 2.0 introduces mandatory muon veto, invar‑based geometry stabilisation with laser distance monitoring, analytical (non‑mechanical) trap definition, and dedicated trend analysis for operator fatigue. The aim is detection of reproducible deviations from the standard decay law or establishment of a quantitative upper bound.
While optical manipulation of atomic arrays has reached a high degree of precision and scalability, the stable optical confinement of solution-based artificial atoms like colloidal quantum dots (CQDs) remains hindered by weak trapping forces and thermal fluctuations. High-intensity trapping often compromises the quantum properties of these emitters, creating a significant trade-off between mechanical stability and optical integrity. To overcome this, we propose encapsulating CQDs within a transparent polymer matrix, thereby increasing the effective interaction volume and optical restoring force without altering the emitters themselves. This strategy allows for stable spatial confinement under standard experimental conditions, as evidenced by the direct resolution of positional fluctuations through photoluminescence imaging and trajectory tracking. With averaged position fluctuations below 20 nm, the intrinsic emission spectra and photoluminescence decay dynamics remain largely unaffected, and photon-correlation measurements confirm the full preservation of single-photon emission. These findings establish a robust method for the controlled confinement of colloidal quantum emitters and in-situ quantum-optical measurements for future advancements in quantum-optical manipulation of artificial atoms.
Protocol TEC‑89 implements the unified metrological framework of Protocol 9.0 to test the claimed phenomenon of intention influence on quantum random number generators (QRNG) – the alleged ability of a person (the "intender") to bias the output of a true hardware‑based quantum random number generator (e.g., ID Quantique Quantis, ANU Quantum Numbers, or equivalent) through intention alone, without physical contact. The primary observable is the deviation of the QRNG bit distribution (mean z‑score) from the expected chance level (50/50) during active intention periods, compared to control periods (no intention, sham intention, or trap conditions). The experimental design includes a certified hardware QRNG (Quantis‑v10.10.08 or equivalent) with direct USB connection (no buffer), real‑time visual/audio feedback for the intender (to enhance engagement), continuous logging of all bits with time stamps, triple blinding (intender, experimenter, and analyst are blind to condition), trap conditions (the intender is told to "influence" but the QRNG is replaced by a deterministic pseudo‑RNG), sham conditions (the intender is told to "influence" but is actually resting), catch conditions (a known bias is introduced into the QRNG output to validate the measurement system's sensitivity), positive controls (known effects, e.g., varying the number of bits per trial, to calibrate the system), physiological monitoring (skin conductance, heart rate variability, EEG alpha/theta power) to correlate with intention states, comprehensive environmental monitoring (temperature, humidity, electromagnetic fields), and automated data logging. The protocol mandates a pilot phase to calibrate the QRNG, establish the baseline noise floor, and validate the blinding procedure. The primary analysis uses a Linear Mixed Model (LMM) or a Binomial GLM comparing the z‑score (or proportion of 1s) between active and control conditions, with α = 0.025 (two‑tailed) and power ≥ 0.90 for a small effect (Cohen's d ≥ 0.05). The sample size is N = 10,000 bits per block (baseline, with adaptive increase to N = 100,000 bits if pilot shows high variability). Statistical analyses are preregistered, include Bayesian inference (BF₁₀), permutation tests, and multiverse robustness checks (≥70% of 12 forks). The aim is to detect a reproducible intention‑induced QRNG bias or to establish an upper bound on the effect size with unprecedented rigor.
This companion progress note develops the original Firefly Interferometer proposal in two connected directions: spectral optimisation of the bioluminescent source and quantitative analysis of the external detector pattern. The delivered spectral photon distribution - not perceived colour - is treated as an adjustable experimental variable. The proposed development sequence begins with calibrated artificial sources, proceeds to controlled cell-free beetle luciferase systems, and considers a living bioluminescent source only where justified by the preceding results. No wavelength is assumed in advance to be superior. The detector wall is treated as a complete two-dimensional statistical distribution rather than an image judged by eye. Event-level impact positions and arrival times are evaluated through a frozen and blinded analysis pipeline. Fringe visibility, phase, spacing, envelope width, centroid, asymmetry, transmission and structured residuals are retained as interpretable observables. The methodology includes apparatus-stability controls, Poisson and overdispersed count models, delivered-spectrum calibration, pulse-matched artificial controls and a defined minimum detectable concealed difference. The objective is to determine whether a concealed spectral condition inside the sealed apparatus can be inferred solely from a reproducible change in the accumulated matter-wave detection pattern. No biological or matter-wave interferometry experiment is reported, and no empirical result is claimed. This publication is a separately dated companion to “The Firefly Interferometer: A Calibrated Test of Whether Bioluminescent Light Can Reduce Matter-Wave Interference in a Sealed System,” Version 1.0, DOI: 10.5281/zenodo.21417578. It develops, qualifies and operationally sharpens the original programme without altering its published file, publication date, DOI or historical record.