Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

PHY‑02: Ultra‑High‑Rigor Null‑Test Protocol for Macro‑Psychokinesis on a Mechanical Resonator

Vadim Streltsov

Published Aug 3, 2026• 0 citations
Publisher

Abstract

Protocol PHY‑02 implements the unified metrological framework of Protocol 9.0 for testing claimed macro‑psychokinesis (macro‑PK) — the alleged ability of human intention to produce measurable changes in the dynamics of a macroscopic mechanical resonator. The target system is a high‑Q resonator (tuning fork, quartz oscillator, or microcantilever) with amplitude, frequency, and phase as observables. The experimental architecture comprises physically isolated channels: an active resonator (target), a control resonator (dummy), and trap intervals. Version 2.0 introduces mandatory active temperature stabilisation, acoustic pressure monitoring, short‑time sliding‑window analysis, robust handling of non‑Gaussian noise, and extended kill criteria. Triple blinding, mandatory failure‑mode demonstration, multiverse analysis, and a Minimum Detectable Effect (MDE ≥ 5σ above the Allan‑deviation noise floor) establish an uncompromising metrological standard. The aim is detection of reproducible deviations from thermodynamic equilibrium or establishment of a quantitative upper bound, not confirmation of macro‑PK.

DOI
10.5281/zenodo.21780286

Related papers

PHY‑03: Ultra‑High‑Rigor Null‑Test Protocol for Intention Influence on Radioactive Decay

Vadim Streltsov

Protocol PHY‑03 implements the unified metrological framework of Protocol 9.0 for testing claimed intention‑based modulation of radioactive decay rates. Using two matched long‑lived sources, triple blinding, and a physically isolated dummy, the protocol targets a Minimum Detectable Effect (MDE) of 5σ above the combined Poisson‑Allan noise floor. Version 2.0 introduces mandatory muon veto, invar‑based geometry stabilisation with laser distance monitoring, analytical (non‑mechanical) trap definition, and dedicated trend analysis for operator fatigue. The aim is detection of reproducible deviations from the standard decay law or establishment of a quantitative upper bound.

•Aug 3, 2026•0 citations

PIIP-PHYS.01 (Version 1.0): Quantum Micro‑Psychokinesis (μ‑PK) on Entropic Random Number Generators

Vadim Streltsov

This protocol is a concrete implementation of the unified metrological framework Protocol 9.0 applied to the claimed phenomenon of micro‑psychokinesis (μ‑PK) — the alleged ability of consciousness to produce a statistically significant deviation of the output of a quantum random number generator (QRNG) from the theoretically expected binomial distribution. The protocol is mechanism‑neutral. Its goal is either to detect a reproducible deviation ΔX from the null model (fair coin p0 = 0.5) or to establish a quantitative upper bound on the possible effect under strictly controlled conditions. The document contains the full experimental architecture (target, dummy, trap), a procedure for demonstrating failure modes, requirements for the minimum detectable effect (MDE ≥ 5σ), triple blinding, multiverse analysis, and validity/exclusion criteria.

•Aug 3, 2026•0 citations

PHY‑07: Remote Influence on a Pendulum

Vadim Streltsov

Protocol PHY‑07 implements the unified metrological framework of Protocol 9.0 to test the claimed ability of human intention to remotely alter the dynamics of a macroscopic pendulum. Version 2.0 incorporates a common invar baseplate for both pendulums to suppress differential vibrations, electrostatic shielding to eliminate charge‑induced artifacts, and a mandatory pilot phase with a fictitious operator to validate that the differential noise floor is indeed below the pre‑registered MDE. The protocol is designed for a specialised laboratory environment with active vibration isolation, high vacuum, and precision optical metrology. Triple blinding, calibration impulses, and multiverse analysis establish an uncompromising standard. The aim is detection of reproducible deviations from baseline or establishment of a quantitative upper bound on anomalous coupling.

•Aug 4, 2026•0 citations

PHY‑11: Intention Influence on Laser Emission Spectrum – Version 1.1 (Hardened)

Vadim Streltsov

Protocol PHY‑11 v1.1 implements the unified metrological framework of Protocol 9.0 to test the claimed ability of human intention to alter the emission spectrum of a laser. Version 1.1 introduces independent wavelength meters for each laser, acoustic enclosures and increased operator distance (5 m), real‑time monitoring of back‑reflections, and a hysteresis test in the pilot phase to verify that the system is free from irreversible drifts. The protocol is designed for specialised optical laboratories with ultra‑stable lasers, high‑precision frequency metrology, and rigorous environmental control. Triple blinding, calibration perturbations, multiverse analysis, and a Minimum Detectable Effect (MDE) of 5σ above the Allan‑derived noise floor establish an uncompromising standard.

•Aug 4, 2026•0 citations

TEC‑89: Ultra‑High‑Rigor Protocol for Intention Influence on QRNG

Vadim Streltsov

Protocol TEC‑89 implements the unified metrological framework of Protocol 9.0 to test the claimed phenomenon of intention influence on quantum random number generators (QRNG) – the alleged ability of a person (the "intender") to bias the output of a true hardware‑based quantum random number generator (e.g., ID Quantique Quantis, ANU Quantum Numbers, or equivalent) through intention alone, without physical contact. The primary observable is the deviation of the QRNG bit distribution (mean z‑score) from the expected chance level (50/50) during active intention periods, compared to control periods (no intention, sham intention, or trap conditions). The experimental design includes a certified hardware QRNG (Quantis‑v10.10.08 or equivalent) with direct USB connection (no buffer), real‑time visual/audio feedback for the intender (to enhance engagement), continuous logging of all bits with time stamps, triple blinding (intender, experimenter, and analyst are blind to condition), trap conditions (the intender is told to "influence" but the QRNG is replaced by a deterministic pseudo‑RNG), sham conditions (the intender is told to "influence" but is actually resting), catch conditions (a known bias is introduced into the QRNG output to validate the measurement system's sensitivity), positive controls (known effects, e.g., varying the number of bits per trial, to calibrate the system), physiological monitoring (skin conductance, heart rate variability, EEG alpha/theta power) to correlate with intention states, comprehensive environmental monitoring (temperature, humidity, electromagnetic fields), and automated data logging. The protocol mandates a pilot phase to calibrate the QRNG, establish the baseline noise floor, and validate the blinding procedure. The primary analysis uses a Linear Mixed Model (LMM) or a Binomial GLM comparing the z‑score (or proportion of 1s) between active and control conditions, with α = 0.025 (two‑tailed) and power ≥ 0.90 for a small effect (Cohen's d ≥ 0.05). The sample size is N = 10,000 bits per block (baseline, with adaptive increase to N = 100,000 bits if pilot shows high variability). Statistical analyses are preregistered, include Bayesian inference (BF₁₀), permutation tests, and multiverse robustness checks (≥70% of 12 forks). The aim is to detect a reproducible intention‑induced QRNG bias or to establish an upper bound on the effect size with unprecedented rigor.

•Aug 15, 2026•0 citations

How Smokers Change Their World and How the World Responds: Testing the Oscillatory Nature of Micro-Psychokinetic Observer Effects on Addiction-Related Stimuli

Moritz C. Dechamps, Markus Maier

According to standard quantum theory, the occurrence of a specific outcome during a quantum measurement is completely random (see Bell 1964). However, some authors refer to revised versions of quantum mechanics (e.g., Penrose & Hameroff 2011, Mensky 2013, Stapp 2017), and propose that the human mind can actually influence the probability of such outcomes. Empirical support for this idea has been provided by micro-psychokinesis (micro-PK) research (see Bösch, Steinkamp, & Boller 2006). However, attempts to replicate these findings have often failed (e.g. Jahn et al. 2000). In an attempt to explain these failures, von Lucadou, Römer, and Walach (2007) established a theoretical model for predicting unsystematic variations of such an influencing effect across replications, resulting in a decline of the effect in micro-PK data over time. Maier, Dechamps, and Pflitsch (2018) slightly expanded this theory by proposing that the temporal variation of such an effect follows a systematic pattern, which can be tested and used for prediction making. In this research we generated such a prediction using data from two previous studies that initially demonstrated a strong micro-PK followed by a subsequent decline in the effect over the course of 297 participants (Maier & Dechamps 2018), we then put it to test with an additionally preregistered set of recollected data from 203 subjects. We compared these results with 10,000 simulated data sets (each set with an N = 203) each comprising random data. Three tests were applied to the experimental data: an area under the curve analysis, a local maximum fit test, and an endpoint fit test. These tests revealed no significant fit of the real data regarding the predicted data pattern. Further analyses explored additional techniques, including an analysis of the highest reached Bayes Factor (BF) over the course of the experiments, the overall orientation of the BF curve, and its transformation into oscillatory components via a Fourier analysis. All these methods allowed for statistically significant differentiations between experimental data on the one side, and the control group and simulation data on the other. We conclude that the analyses of the temporal development of an effect along these lines constitute a fruitful approach toward testing non-random and volatile time trends within micro-PK data.

Journal of Scientific Exploration•Sep 15, 2019•14 citations
Protocol PHY‑02 implements the unified metrological framework of Protocol 9.0 for testing claimed macro‑psychokinesis (macro‑PK) — the alleged ability of human intention to produce measurable changes in the dynamics of a macroscopic mechanical resonator. The target system is a high‑Q resonator (tuning fork, quartz oscillator, or microcantilever) with amplitude, frequency, and phase as observables. The experimental architecture comprises physically isolated channels: an active resonator (target), a control resonator (dummy), and trap intervals. Version 2.0 introduces mandatory active temperature stabilisation, acoustic pressure monitoring, short‑time sliding‑window analysis, robust handling of non‑Gaussian noise, and extended kill criteria. Triple blinding, mandatory failure‑mode demonstration, multiverse analysis, and a Minimum Detectable Effect (MDE ≥ 5σ above the Allan‑deviation noise floor) establish an uncompromising metrological standard. The aim is detection of reproducible deviations from thermodynamic equilibrium or establishment of a quantitative upper bound, not confirmation of macro‑PK.
Protocol PHY‑03 implements the unified metrological framework of Protocol 9.0 for testing claimed intention‑based modulation of radioactive decay rates. Using two matched long‑lived sources, triple blinding, and a physically isolated dummy, the protocol targets a Minimum Detectable Effect (MDE) of 5σ above the combined Poisson‑Allan noise floor. Version 2.0 introduces mandatory muon veto, invar‑based geometry stabilisation with laser distance monitoring, analytical (non‑mechanical) trap definition, and dedicated trend analysis for operator fatigue. The aim is detection of reproducible deviations from the standard decay law or establishment of a quantitative upper bound.
This protocol is a concrete implementation of the unified metrological framework Protocol 9.0 applied to the claimed phenomenon of micro‑psychokinesis (μ‑PK) — the alleged ability of consciousness to produce a statistically significant deviation of the output of a quantum random number generator (QRNG) from the theoretically expected binomial distribution. The protocol is mechanism‑neutral. Its goal is either to detect a reproducible deviation ΔX from the null model (fair coin p0 = 0.5) or to establish a quantitative upper bound on the possible effect under strictly controlled conditions. The document contains the full experimental architecture (target, dummy, trap), a procedure for demonstrating failure modes, requirements for the minimum detectable effect (MDE ≥ 5σ), triple blinding, multiverse analysis, and validity/exclusion criteria.
Protocol PHY‑07 implements the unified metrological framework of Protocol 9.0 to test the claimed ability of human intention to remotely alter the dynamics of a macroscopic pendulum. Version 2.0 incorporates a common invar baseplate for both pendulums to suppress differential vibrations, electrostatic shielding to eliminate charge‑induced artifacts, and a mandatory pilot phase with a fictitious operator to validate that the differential noise floor is indeed below the pre‑registered MDE. The protocol is designed for a specialised laboratory environment with active vibration isolation, high vacuum, and precision optical metrology. Triple blinding, calibration impulses, and multiverse analysis establish an uncompromising standard. The aim is detection of reproducible deviations from baseline or establishment of a quantitative upper bound on anomalous coupling.
Protocol PHY‑11 v1.1 implements the unified metrological framework of Protocol 9.0 to test the claimed ability of human intention to alter the emission spectrum of a laser. Version 1.1 introduces independent wavelength meters for each laser, acoustic enclosures and increased operator distance (5 m), real‑time monitoring of back‑reflections, and a hysteresis test in the pilot phase to verify that the system is free from irreversible drifts. The protocol is designed for specialised optical laboratories with ultra‑stable lasers, high‑precision frequency metrology, and rigorous environmental control. Triple blinding, calibration perturbations, multiverse analysis, and a Minimum Detectable Effect (MDE) of 5σ above the Allan‑derived noise floor establish an uncompromising standard.
Protocol TEC‑89 implements the unified metrological framework of Protocol 9.0 to test the claimed phenomenon of intention influence on quantum random number generators (QRNG) – the alleged ability of a person (the "intender") to bias the output of a true hardware‑based quantum random number generator (e.g., ID Quantique Quantis, ANU Quantum Numbers, or equivalent) through intention alone, without physical contact. The primary observable is the deviation of the QRNG bit distribution (mean z‑score) from the expected chance level (50/50) during active intention periods, compared to control periods (no intention, sham intention, or trap conditions). The experimental design includes a certified hardware QRNG (Quantis‑v10.10.08 or equivalent) with direct USB connection (no buffer), real‑time visual/audio feedback for the intender (to enhance engagement), continuous logging of all bits with time stamps, triple blinding (intender, experimenter, and analyst are blind to condition), trap conditions (the intender is told to "influence" but the QRNG is replaced by a deterministic pseudo‑RNG), sham conditions (the intender is told to "influence" but is actually resting), catch conditions (a known bias is introduced into the QRNG output to validate the measurement system's sensitivity), positive controls (known effects, e.g., varying the number of bits per trial, to calibrate the system), physiological monitoring (skin conductance, heart rate variability, EEG alpha/theta power) to correlate with intention states, comprehensive environmental monitoring (temperature, humidity, electromagnetic fields), and automated data logging. The protocol mandates a pilot phase to calibrate the QRNG, establish the baseline noise floor, and validate the blinding procedure. The primary analysis uses a Linear Mixed Model (LMM) or a Binomial GLM comparing the z‑score (or proportion of 1s) between active and control conditions, with α = 0.025 (two‑tailed) and power ≥ 0.90 for a small effect (Cohen's d ≥ 0.05). The sample size is N = 10,000 bits per block (baseline, with adaptive increase to N = 100,000 bits if pilot shows high variability). Statistical analyses are preregistered, include Bayesian inference (BF₁₀), permutation tests, and multiverse robustness checks (≥70% of 12 forks). The aim is to detect a reproducible intention‑induced QRNG bias or to establish an upper bound on the effect size with unprecedented rigor.
According to standard quantum theory, the occurrence of a specific outcome during a quantum measurement is completely random (see Bell 1964). However, some authors refer to revised versions of quantum mechanics (e.g., Penrose & Hameroff 2011, Mensky 2013, Stapp 2017), and propose that the human mind can actually influence the probability of such outcomes. Empirical support for this idea has been provided by micro-psychokinesis (micro-PK) research (see Bösch, Steinkamp, & Boller 2006). However, attempts to replicate these findings have often failed (e.g. Jahn et al. 2000). In an attempt to explain these failures, von Lucadou, Römer, and Walach (2007) established a theoretical model for predicting unsystematic variations of such an influencing effect across replications, resulting in a decline of the effect in micro-PK data over time. Maier, Dechamps, and Pflitsch (2018) slightly expanded this theory by proposing that the temporal variation of such an effect follows a systematic pattern, which can be tested and used for prediction making. In this research we generated such a prediction using data from two previous studies that initially demonstrated a strong micro-PK followed by a subsequent decline in the effect over the course of 297 participants (Maier & Dechamps 2018), we then put it to test with an additionally preregistered set of recollected data from 203 subjects. We compared these results with 10,000 simulated data sets (each set with an N = 203) each comprising random data. Three tests were applied to the experimental data: an area under the curve analysis, a local maximum fit test, and an endpoint fit test. These tests revealed no significant fit of the real data regarding the predicted data pattern. Further analyses explored additional techniques, including an analysis of the highest reached Bayes Factor (BF) over the course of the experiments, the overall orientation of the BF curve, and its transformation into oscillatory components via a Fourier analysis. All these methods allowed for statistically significant differentiations between experimental data on the one side, and the control group and simulation data on the other. We conclude that the analyses of the temporal development of an effect along these lines constitute a fruitful approach toward testing non-random and volatile time trends within micro-PK data.