The sixth-generation (6G) networks are envisioned to support massive machine-type communication (mMTC) and ultra-reliable low-latency communication (uRLLC). These capabilities enable mission-critical Internet of Things (IoT) applications with strict reliability and timing requirements. However, the emergence of quantum computing poses a serious threat to traditional cryptographic mechanisms. Existing post-quantum cryptography (PQC) solutions introduce computational overheads that are unsuitable for resource-constrained IoT devices, while existing PUF, PQC, and QRNG-assisted schemes do not jointly provide hardware-rooted identity, quantum-grade freshness, post-quantum key establishment, and latency-bounded data-plane protection. To address this gap, this paper proposesQuantPUF, an asymmetric quantum-resistant communication scheme for QRNG-capable 6G edge–IoT devices.QuantPUFbinds PUF-based device identity, QRNG-derived entropy, and one-time ML-KEM key establishment into a unified master key, while offloading post-quantum computation to the edge and enforcing lightweight AEAD at the device for latency-bounded operation. Experimental results demonstrate near-unit secure-update delivery at moderate-to-high SNR while eliminating recurring post-quantum overhead. Compared to existing baselines,QuantPUFmaintains session linkability below 0.1 over 50 observed sessions and replay success below 0.15 over 40 observed sessions, while enabling up to 8× energy savings and establishing a unified quantum-resilient framework for 6G edge–IoT.
The sixth-generation (6G) networks are envisioned to support massive machine-type communication (mMTC) and ultra-reliable low-latency communication (uRLLC). These capabilities enable mission-critical Internet of Things (IoT) applications with strict reliability and timing requirements. However, the emergence of quantum computing poses a serious threat to traditional cryptographic mechanisms. Existing post-quantum cryptography (PQC) solutions introduce computational overheads that are unsuitable for resource-constrained IoT devices, while existing PUF, PQC, and QRNG-assisted schemes do not jointly provide hardware-rooted identity, quantum-grade freshness, post-quantum key establishment, and latency-bounded data-plane protection. To address this gap, this paper proposesQuantPUF, an asymmetric quantum-resistant communication scheme for QRNG-capable 6G edge–IoT devices.QuantPUFbinds PUF-based device identity, QRNG-derived entropy, and one-time ML-KEM key establishment into a unified master key, while offloading post-quantum computation to the edge and enforcing lightweight AEAD at the device for latency-bounded operation. Experimental results demonstrate near-unit secure-update delivery at moderate-to-high SNR while eliminating recurring post-quantum overhead. Compared to existing baselines,QuantPUFmaintains session linkability below 0.1 over 50 observed sessions and replay success below 0.15 over 40 observed sessions, while enabling up to 8× energy savings and establishing a unified quantum-resilient framework for 6G edge–IoT.
Quantum computing is also posing a serious challenge to the classical cryptographic algorithms like RSA and ECC as they have vulnerability to quantum algorithms such as Shor and Grover. This is a serious problem to Internet of Things (IoT) and edge computing systems, where billions of devices work with strict resource constraints in processing power, memory and energy. To resolve this, we are introducing a minimal postquantum cryptography model to be used in edge platforms with constraints on their resources. This framework combines fierce encapsulation of key (Kyber512) on a lattice with traditional ECDH in a hybrid system of key establishment, along with the Ascon AEAD encryption algorithm to provide effective data hiding and integrity provision. Furthermore, rekeying and forward secrecy on a lightweight basis is possible to reconfigure a layer with negligible overhead on a secure transmission with forward secrecy. The experimental data with ARM Cortex-M and RISC-V architectures and 128-bit post-quantum security has shown that the proposed system can reduce the latency by up to 30 percent and the energy usage by up to 35 percent and considerably better throughput than PQC-only implementations. These findings validate the fact that hybrid PQC solutions have the potential to provide high-resistance quantum with minimal overhead and thus are best suited to IoT and edge applications. The paper offers a viable and extensible security design in conformance with the NIST PQC and IETF migration policies, which can support secure communication in the post-quantum era.
The deployment of 5G and emerging 6G networks introduces significant security challenges for Internet of Things (IoT) ecosystems comprising billions of heterogeneous devices, including resource-constrained endpoints, more capable embedded controllers, gateways, edge nodes, and network infrastructure. At the same time, the long-term security of widely deployed public-key cryptography is challenged by advances in quantum computing, motivating migration toward standardized post-quantum key-establishment and digital-signature mechanisms. This comprehensive, evidence-based review classifies cryptographic mechanisms for wireless IoT in 5G and beyond across lightweight symmetric cryptography, post-quantum cryptography, privacy-preserving encryption, and adaptive security. The literature-reported implementation results are compared with explicit attention to heterogeneous hardware, memory, energy, communication, and latency constraints. Lightweight symmetric mechanisms remain relevant for constrained data protection, while standardized post-quantum mechanisms such as ML-KEM and ML-DSA address quantum-vulnerable public-key functions and generally introduce larger keys, ciphertexts, signatures, certificates, or protocol messages. This review therefore emphasizes interoperability, firmware upgradability, crypto-agility, and lifecycle management rather than physical device-size growth. A conceptual three-phase roadmap for 2025–2035 is presented in which quantum-vulnerable public-key mechanisms are progressively supplemented and, where appropriate, replaced by hybrid classical–post-quantum and then post-quantum-capable architectures, while standardized symmetric/lightweight protection remains in use where it satisfies application requirements. The roadmap dates are planning intervals rather than universal adoption forecasts.
The rapid proliferation of Internet of Things (IoT) devices in smart cities, industrial automation, and healthcare systems has significantly increased the demand for secure and efficient communication mechanisms. However, the emergence of quantum computing poses a serious threat to conventional public-key cryptographic schemes, potentially compromising the confidentiality and authenticity of IoT communications. Existing authentication and key agreement protocols primarily rely on classical cryptographic algorithms, which are vulnerable to quantum attacks and often impose considerable computational and communication overhead on resource-constrained IoT devices. Furthermore, many current solutions fail to provide a balanced trade-off between security strength and energy efficiency in edge-enabled IoT environments. To address these challenges, this paper proposes EdgePQ-Auth, a lightweight lattice-based mutual authentication and key agreement framework designed for quantum-resilient Edge-IoT networks. The proposed framework consists of four modules: Device Registration, Mutual Authentication, Post-Quantum Key Agreement (PQKA), and Secure Data Transmission using Symmetric Encryption. By leveraging lattice-based cryptography for authentication and session key establishment while utilizing lightweight symmetric encryption for subsequent communications, the framework minimizes computational burden on IoT devices and delegates intensive operations to the edge gateway. The proposed scheme ensures resistance against replay, impersonation, man-in-the-middle, and quantum-enabled attacks while maintaining low resource consumption. Experimental evaluation demonstrates that EdgePQ-Auth achieves superior performance in terms of authentication latency, communication overhead, and energy consumption compared with existing PQ IoT security protocols. The results indicate that the proposed framework provides an effective and scalable solution for securing next-generation quantum-resilient Edge-IoT deployments.
The convergence of quantum computing threats and resource-constrained Internet of Things (IoT) ecosystems presents a fundamental security challenge for emerging 6G networks. Post-Quantum cryptography (PQC) has been designated as a key research priority by several leading institutions seeking advances in encryption techniques that will drive a paradigm shift. Post-quantum cryptography (PQC) can resist quantum attacks, but direct deployment on constrained IoT hardware often incurs high computation, memory, and energy costs. This paper presents QSAFE, a lightweight hybrid cryptographic framework that combines established classical primitives with NIST-recommended PQC algorithms to provide defense-in-depth without compromising operational feasibility on varied IoT platforms. QSAFE is positioned as a systems and engineering framework for quantum-resilient 6G IoT rather than a new cryptographic primitive. Comparative experiments show that QSAFE achieves higher performance than selected pure PQC baselines while incurring only 6–8% overhead relative to classical-only protocols under our evaluated configuration. Security analysis demonstrates that QSAFE complies with NIST Security Level 1 (SL1) through an AND-composition defense-in-depth architecture. Future work includes hardware acceleration, adaptive platform security mechanisms, and standardization in collaboration with the Internet Engineering Task Force (IETF) and the National Institute of Standards and Technology (NIST).
The rapid expansion of Internet of Things (IoT) ecosystems has increased the need for communication mechanisms that can remain secure against emerging computational threats. Conventional asymmetric cryptographic schemes, including RSA and Elliptic Curve Cryptography (ECC), are vulnerable to advances in quantum computing due to the ability of Shor's algorithm to undermine their underlying mathematical assumptions. To address these challenges, this paper presents PQ-IoT SecureCom, a quantum-resistant communication framework built using NIST-standardized post-quantum cryptographic primitives. The proposed framework employs ML-KEM (derived from Kyber) for secure key encapsulation and ML-DSA (derived from Dilithium) for digital authentication, combined with AESGCM to ensure data confidentiality and integrity. Additional security mechanisms, including PQC-based device certification, periodic session key updates, and nonce-based timestamp validation, are incorporated to mitigate replay and impersonation attacks. The framework also supports a hybrid operational mode that enables performance comparison between classical and postquantum cryptographic schemes. System behavior is monitored using a real-time dashboard that records cryptographic overhead, communication metrics, and detected security events. Experimental evaluation shows that ML-KEM and ML-DSA significantly enhance security while introducing computational overhead that remains acceptable for contemporary IoT devices. Through automated attack simulations and detailed event logging, PQ-IoT SecureCom demonstrates the practical feasibility of deploying scalable post-quantum security in IoT communication systems.
Sixth Generation (6 G) networks will support critical, latency-sensitive, and large-scale services, making them attractive targets for quantum-capable adversaries. To address this, the paper proposes a conceptual Post-Quantum Cryptography (PQC) framework for high-level security protocols in 6G, including Transport Layer Security (TLS) 1.3, Internet Key Exchange version 2 (IKEv2), Secure Shell (SSH), Message Queuing Telemetry Transport (MQTT), and Constrained Application Protocol (CoAP), using security-by-design principles, hybrid classical-post-quantum migration, and optimization for resourceconstrained and heterogeneous environments. The framework defines key metrics such as handshake latency, computational and memory overhead, energy consumption, interoperability, and resistance to quantum and classical attacks, and analyzes risks introduced by hybrid protocol complexity, side channels, and implementation flaws. The framework is illustrated via a reference hybrid TLS 1.3 design using National Institute of Standards and Technology (NIST)-standardized Module-LatticeBased Key-Encapsulation Mechanism (ML-KEM) and Module-Lattice-Based Digital Signature Algorithm (ML-DSA) and an evaluation methodology based on Open Secure Sockets Layer (OpenSSL)/liboqs, outlining how future prototypes can measure latency, bandwidth, and computational overhead under UltraReliable Low-Latency Communication (URLLC) and Massive Machine-Type Communications (mMTC) constraints. By combining requirements analysis, design patterns, and evaluation methodology, this work supports quantum-safe 6 G infrastructure with scalable, reliable, and long-term secure deployment, providing a blueprint for future empirical validation rather than reporting completed measurements.