Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Advanced Quantum Technologies

Scalable Approach For Superconducting Nanowire Single Photon Detector Multi‐Pixel Arrays Using Electrical Multiplexing

Sandra Mennle, Philipp Karl, Harald W. Giessen

Published Jul 1, 2026• 1 citation
Publisher

Abstract

ABSTRACT Highly sensitive detectors have become an indispensable part of today's research with applications in spectroscopy, data transmission, and quantum technologies. Featuring high efficiency superconducting nanowire single photon detector are state‐of‐the‐art for today's challenges. However, many applications such as biomedical and astronomical imaging, beam profiling, and spatially resolved photon statistics do not only require an individual highly sensitive photon detector, but rather an entire array of multiple detectors. This paper presents a novel approach for a 2D multi‐pixel array, consisting of electrically multiplexed superconducting nanowire single photon detectors. The scalable design features a 4‐layer fabrication scheme with optimized Chromium series resistors for best dynamic range. The presented approach hereby drastically reduces the number of required contacts from the standard contacts for detectors to only contacts. Our simulations confirm the working principle and prove the scalability up to kilo‐pixel arrays.

DOI
10.1002/qute.70378

Related papers

Recent advances in superconducting nanowire single photon detectors for single-photon imaging

Varun Boehm Verma, Michael S. Allman, Martin J. Stevens +9 more

We demonstrate a 64-pixel free-space-coupled array of superconducting nanowire single photon detectors optimized for high detection efficiency in the near-infrared range. An integrated, readily scalable, multiplexed readout scheme is employed to reduce the number of readout lines to 16. The cryogenic, optical, and electronic packaging to read out the array, as well as characterization measurements are discussed.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 5, 2016•0 citations

Frequency-multiplexed bias and readout of a 16-pixel superconducting nanowire single-photon detector array

S. Doerner, A. Kuzmin, S. Wünsch +4 more

We demonstrate a 16-pixel array of microwave-current driven superconducting nanowire single-photon detectors with an integrated and scalable frequency-division multiplexing architecture, which reduces the required number of bias and readout lines to a single microwave feed line. The electrical behavior of the photon-sensitive nanowires, embedded in a resonant circuit, as well as the optical performance and timing jitter of the single detectors is discussed. Besides the single pixel measurements, we also demonstrate the operation of a 16-pixel array with a temporal, spatial, and photon-number resolution.

arXiv:1705.05345•Applied Physics Letters•Jul 17, 2017•86 citations

A near-infrared 64-pixel superconducting nanowire single photon detector array with integrated multiplexed readout

Michael S. Allman, Varun Boehm Verma, Martin J. Stevens +9 more

We demonstrate a 64-pixel free-space-coupled array of superconducting nanowire single photon detectors optimized for high detection efficiency in the near-infrared range. An integrated, readily scalable, multiplexed readout scheme is employed to reduce the number of readout lines to 16. The cryogenic, optical, and electronic packaging to read out the array as well as characterization measurements are discussed.

arXiv:1504.02812•Applied Physics Letters•May 11, 2015•136 citations

A near-infrared 64-pixel superconducting nanowire single photon detector array with integrated multiplexed readout

Michael S. Allman, Varun Boehm Verma, Martin J. Stevens +9 more

We demonstrate a 64-pixel free-space-coupled array of superconducting nanowire single photon detectors optimized for high detection efficiency in the near-infrared range. An integrated, readily scalable, multiplexed readout scheme is employed to reduce the number of readout lines to 16. The cryogenic, optical, and electronic packaging to read out the array, as well as characterization measurements are discussed.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 6, 2015•11 citations

Characterisation of multi-pixel superconducting nanowire single photon detectors

Jeroen Swens

Single-photon detection is extremely important for a number of different applications such as quantum cryptography, CMOS testing and even biomedical research. Most of the applications of single-photon detector require high efficiency combined with high time resolution, high count rates and low dark counts. Superconducting nanowire single-photon detectors has emerged provides this combination unlike any other available single-photon detectors. Some of the applications of superconducting nanowire single-photon detectors (SNSPD's) require larger area SNSPD's without affecting it's performance. For this purpose, multi-pixel SNSPD's would provide a solution. To this end, prototype 4- and 16-pixel detectors have been characterised in terms of a number of performance parameters such as critical current, count rate behaviour and timing jitter. Aside from this, simulations have been performed on detection statistics and relative illumination of the individual pixels of a multi-pixel SNSPD. Results show that for 4-pixel detectors, all desired aspects have been achieved, but not yet combined in one detector. The 16-pixel detectors showed excellent critical currents and count rate behaviour but, most likely due to the fact that they were prototype chips with little to no protection, had several not functioning pixels.

•Jan 1, 2018•0 citations

Scalable implementation of a superconducting nanowire single-photon detector array with a superconducting digital signal processor

Masahiro Yabuno, Shigeyuki Miyajima, Shigehito Miki +1 more

A two-dimensional single-photon imaging system with high sensitivity and high time resolution is the ultimate camera and useful in a wide range of fields. A superconducting nanowire single-photon detector (SSPD or SNSPD) is one of the best candidates for realizing such an ultimate camera due to its high detection efficiency in a wide spectral range, low dark count rate without after-pulsing, and excellent time resolution. Here we propose a new readout scheme to realize a large-scale imaging array based on SSPD, where a row-column readout architecture is combined with a digital signal processor based on a single-flux-quantum (SFQ) circuit. A 16-pixel row-column readout SSPD array is fabricated and measured with an SFQ digital signal processor. We successfully acquired spatial information as encoded digital bit codes with the temporal information of the photon detection. The system timing jitter was measured as <80 ps for all 16 pixels even through the SFQ signal processor, indicating the potential for an imaging array with an extremely high time resolution.

Optics Express•Apr 1, 2020•40 citations
ABSTRACT Highly sensitive detectors have become an indispensable part of today's research with applications in spectroscopy, data transmission, and quantum technologies. Featuring high efficiency superconducting nanowire single photon detector are state‐of‐the‐art for today's challenges. However, many applications such as biomedical and astronomical imaging, beam profiling, and spatially resolved photon statistics do not only require an individual highly sensitive photon detector, but rather an entire array of multiple detectors. This paper presents a novel approach for a 2D multi‐pixel array, consisting of electrically multiplexed superconducting nanowire single photon detectors. The scalable design features a 4‐layer fabrication scheme with optimized Chromium series resistors for best dynamic range. The presented approach hereby drastically reduces the number of required contacts from the standard contacts for detectors to only contacts. Our simulations confirm the working principle and prove the scalability up to kilo‐pixel arrays.
We demonstrate a 16-pixel array of microwave-current driven superconducting nanowire single-photon detectors with an integrated and scalable frequency-division multiplexing architecture, which reduces the required number of bias and readout lines to a single microwave feed line. The electrical behavior of the photon-sensitive nanowires, embedded in a resonant circuit, as well as the optical performance and timing jitter of the single detectors is discussed. Besides the single pixel measurements, we also demonstrate the operation of a 16-pixel array with a temporal, spatial, and photon-number resolution.
Single-photon detection is extremely important for a number of different applications such as quantum cryptography, CMOS testing and even biomedical research. Most of the applications of single-photon detector require high efficiency combined with high time resolution, high count rates and low dark counts. Superconducting nanowire single-photon detectors has emerged provides this combination unlike any other available single-photon detectors. Some of the applications of superconducting nanowire single-photon detectors (SNSPD's) require larger area SNSPD's without affecting it's performance. For this purpose, multi-pixel SNSPD's would provide a solution. To this end, prototype 4- and 16-pixel detectors have been characterised in terms of a number of performance parameters such as critical current, count rate behaviour and timing jitter. Aside from this, simulations have been performed on detection statistics and relative illumination of the individual pixels of a multi-pixel SNSPD. Results show that for 4-pixel detectors, all desired aspects have been achieved, but not yet combined in one detector. The 16-pixel detectors showed excellent critical currents and count rate behaviour but, most likely due to the fact that they were prototype chips with little to no protection, had several not functioning pixels.
A two-dimensional single-photon imaging system with high sensitivity and high time resolution is the ultimate camera and useful in a wide range of fields. A superconducting nanowire single-photon detector (SSPD or SNSPD) is one of the best candidates for realizing such an ultimate camera due to its high detection efficiency in a wide spectral range, low dark count rate without after-pulsing, and excellent time resolution. Here we propose a new readout scheme to realize a large-scale imaging array based on SSPD, where a row-column readout architecture is combined with a digital signal processor based on a single-flux-quantum (SFQ) circuit. A 16-pixel row-column readout SSPD array is fabricated and measured with an SFQ digital signal processor. We successfully acquired spatial information as encoded digital bit codes with the temporal information of the photon detection. The system timing jitter was measured as <80 ps for all 16 pixels even through the SFQ signal processor, indicating the potential for an imaging array with an extremely high time resolution.