Abstract Quantum teleportation transfers an unknown qubit state from a sender to a receiver using a shared entangled pair and a classically conditioned correction without moving the physical carrier. On the dynamic-circuit hardware, the complete protocol (which includes mid-circuit measurement and conditional feedforward) now runs on a single circuit. We use this to benchmark three-qubit teleportation on a 156-qubit IBM Heron r2 processor (ibm_fez). A single-qubit RY(θ) input was teleported at six angles along a meridian of the Bloch sphere and reconstructed by state tomography alongside two ablation controls; one without entanglement and the other without feedforward. The full protocol returns a mean fidelity of about 0.945, nearly constant across the angles and above the 2/3 full-Bloch-sphere reference at all six sampled angles. Removing feedforward lowered the fidelity to about 0.51, close to a maximally mixed state. On the other hand, removing entanglement yields (1 + cos²θ)/2 with a mean near 0.75, transferring the population but losing the coherence. Together, these results establish that entanglement and feedforward are both necessary. The calibration-limited fidelity serves as a reference for this class of hardware. A separate run returned a Bell-state fidelity value of 0.957. A branch-resolved analysis confirmed that the four measurement branches are Pauli rotations of the target realigned by feedforward. The reported fidelity depends only on the rotation angle and the device noise.
Abstract Quantum teleportation transfers an unknown qubit state from a sender to a receiver using a shared entangled pair and a classically conditioned correction without moving the physical carrier. On the dynamic-circuit hardware, the complete protocol (which includes mid-circuit measurement and conditional feedforward) now runs on a single circuit. We use this to benchmark three-qubit teleportation on a 156-qubit IBM Heron r2 processor (ibm_fez). A single-qubit RY(θ) input was teleported at six angles along a meridian of the Bloch sphere and reconstructed by state tomography alongside two ablation controls; one without entanglement and the other without feedforward. The full protocol returns a mean fidelity of about 0.945, nearly constant across the angles and above the 2/3 full-Bloch-sphere reference at all six sampled angles. Removing feedforward lowered the fidelity to about 0.51, close to a maximally mixed state. On the other hand, removing entanglement yields (1 + cos²θ)/2 with a mean near 0.75, transferring the population but losing the coherence. Together, these results establish that entanglement and feedforward are both necessary. The calibration-limited fidelity serves as a reference for this class of hardware. A separate run returned a Bell-state fidelity value of 0.957. A branch-resolved analysis confirmed that the four measurement branches are Pauli rotations of the target realigned by feedforward. The reported fidelity depends only on the rotation angle and the device noise.
The five-qubit Absolutely Maximally Entangled AME(5,2) state, whose every pair of qubits is maximally mixed so that all its information lives in non-local correlations, could in principle serve as a single shared quantum networking resource for teleporting two unknown qubits in parallel (each via its own Bell measurement and Pauli correction). Nonetheless, its hardware implementations remain scarce despite its theoretical importance. Here, we demonstrate parallel teleportation based on a five-qubit absolutely maximally entangled state, AME(5,2), on the superconducting processor ibm_pittsburgh. We construct three-qubit Clifford decoders that extract two Bell pairs using three logical two-qubit gates for each of 60 inequivalent sender-receiver assignments. Using parallelization and classical Pauli frame post-processing, we retain reference-receiver entanglement on both channels after three teleportation rounds. With XY4 dynamical decoupling and the lowest-cost decoder, the final entanglement fidelities are 0.704±0.028 and 0.680±0.022, where uncertainties are pointwise 99% confidence-interval half-widths over eight trials. Their lower bounds exceed the separability threshold of 1/2. The decoder with lower circuit depth generally retains higher mean fidelity, and XY4 generally improves on XX. These results establish a hardware demonstration of two-channel entanglement transmission through repeated AME-assisted teleportation and provide compact decoding circuits for reconfigurable multipartite communication.
Mid-circuit measurement and classical feed-forward are essential primitives for dynamic-circuit teleportation on superconducting quantum processors. However, the error associated with measurement-conditioned corrective operations remains poorly understood when evaluated with respect to individual measurement branches. In this paper, we present a framework for characterizing feed-forward error in dynamic circuit teleportation without losing valuable information related to its behavior across separate branches. We analyze three approaches to applying measurement-conditioned corrections: (i) physical application, (ii) post-processing adjustments, and (iii) a mitigated physical application which utilizes Bit-Flip Averaging (BFA)-based Probabilistic Readout Error Mitigation (PROM). We experimentally reconstruct branch Choi operators via an entangled reference qubit, and validate our physical-application and post-processing Choi-shadow estimators against full tomography of the branch Choi operators. We perform experiments on two physical qubit layouts which differ greatly in mid-circuit measurement readout error, and observe a reversal in the relative order in branch qualities obtained from the post-processing and PROM mitigation strategies. In one physical layout with higher measurement readout error, the operational feed-forward penalty is relatively modest (approximately 0.02-0.03) and PROM produces higher branch qualities than post-processing for every branch. In a separate layout with lower readout error, the operational feed-forward penalty increases to roughly 0.07, and post-processing exceeds PROM for all branch qualities. Our characterization framework can reveal branch-specific error structure and mitigation behavior that state-of-the-art outcome-averaged analyses fail to expose.
Quantum information can not be perfectly cloned, but approximate copies of quantum information can be generated. Quantum telecloning combines approximate quantum cloning, more typically referred as quantum cloning, and quantum teleportation. Quantum telecloning allows approximate copies of quantum information to be constructed by separate parties, using the classical results of a Bell measurement made on a prepared quantum telecloning state. Quantum telecloning can be implemented as a circuit on quantum computers using a classical co-processor to compute classical feed forward instructions using if statements based on the results of a mid-circuit Bell measurement in real time. We present universal, symmetric, optimal1→Mtelecloning circuits, and experimentally demonstrate these quantum telecloning circuits forM=2up toM=10, natively executed with real time classical control systems on IBM Quantum superconducting processors, known as dynamic circuits. We perform the cloning procedure on many different message states across the Bloch sphere, on 7 IBM Quantum processors, optionally using the error suppression technique X-X sequence digital dynamical decoupling. Two circuit optimizations are utilized, one which removes ancilla qubits forM=2,3, and one which reduces the total number of gates in the circuit but still uses ancilla qubits. Parallel single qubit tomography with MLE density matrix reconstruction is used in order to compute the mixed state density matrices of the clone qubits, and clone quality is measured using quantum fidelity. These results present one of the largest and most comprehensive NISQ computer experimental analyses on (single qubit) quantum telecloning to date. The clone fidelity sharply decreases to 0.5 forM>5, but forM=2we are able to achieve a mean clone fidelity of up to 0.79 using dynamical decoupling.
Teleportation of a quantum state may be used for distributing entanglement between distant qubits in quantum communication and for quantum computation. Here we demonstrate the implementation of a teleportation protocol, up to the single-shot measurement step, with superconducting qubits coupled to a microwave resonator. Using full quantum state tomography and evaluating an entanglement witness, we show that the protocol generates a genuine tripartite entangled state of all three qubits. Calculating the projection of the measured density matrix onto the basis states of two qubits allows us to reconstruct the teleported state. Repeating this procedure for a complete set of input states we find an average output state fidelity of 86%.
We present a density-matrix simulation framework for quantum teleportation that integrates a comprehensive set of physically motivated noise channels calibrated to contemporary superconducting processors. Departing from deferred-measurement simplifications, the simulator explicitly tracks measurement branches of the Bell measurement and models realistic effects, including readout misassignment, coherent control errors, leakage, crosstalk, and low-frequency dephasing. The framework produces an end-to-end error budget and is validated against experimental executions, with extensive statistical checks (bootstrap confidence intervals, hypothesis tests, and goodness-of-fit analysis) demonstrating close agreement between predicted and measured state-transfer behavior. Our analysis highlights readout misassignment as the dominant fidelity limiter in the measurement-based protocol and shows that targeted readout mitigation provides higher leverage than equivalent improvements in coherence alone. The implementation is extensible to multi-qubit and networked teleportation protocols and serves as a practical tool for forecasting teleportation performance on near-term quantum hardware.
Quantum entanglement is one of the primary features which distinguish quantum computers from classical computers. In gate-based quantum computing, the creation of entangled states or the distribution of entanglement across a quantum processor often requires circuit depths, which grow with the number of entangled qubits. However, in teleportation-based quantum computing, one can deterministically generate entangled states with a circuit depth that is constant in the number of qubits, provided that one has access to an entangled resource state, the ability to perform mid-circuit measurements, and can rapidly transmit classical information. In this work, aided by fast classical field programmable gate array-based control hardware with a feedback latency of only 150 ns, we explore the utility of teleportation-based protocols for generating non-local, multi-partite entanglement between superconducting qubits. First, we demonstrate well-known protocols for generating Greenberger–Horne–Zeilinger states and non-local controlled-NOT gates in constant depth. Next, we utilize both protocols for implementing a quantum fan-out gate in constant depth among three non-local qubits (i.e., controlled-NOT-NOT). Finally, we demonstrate deterministic state teleportation and entanglement swapping between qubits on opposite sides of our quantum processor. Throughout this work, we find that the fidelity of our teleportation-based protocols is limited by measurement-induced dephasing on idling spectator qubits. Therefore, our work serves as a useful study of the current benefits and limitations of teleportation-based protocols on contemporary superconducting quantum processors.