Abstract We introduce Quantum Diagnostic Intelligence (QDI), a five-layer decision-support architecture for inferring the operational state of quantum processing units from circuit-level measurements. Pulse-level calibration metrics — coherence times T₁ and T₂ measured through single-qubit Rabi and Ramsey sequences — are the dominant industry standard for certifying quantum hardware health. We demonstrate, through 191 circuit executions on three 156-qubit IBM Heron r2 processors, that circuit-level measurements contain diagnostic information that T₁/T₂ may not capture. On ibm_marrakesh between July 3 and July 5, 2026, IBM-reported T₂ improved from 303 to 340 µs (+ 12%), while circuit-level GHZ scaling yielded α = 3.811, a QDI health score of 37.8/100 [95% CI: 7.6, 67.9], and a circuit infidelity increase of 920% at n = 2 qubits. The QDI architecture formalizes this observation through four operators: a diagnostic state classifier D(χ), a health score H(χ), a recommendation generator R(χ), and a drift forecast F(χ, t). Rules trained on ibm_kingston correctly classified ibm_fez and both ibm_marrakesh sessions without retuning (3/3 held-out tests; n = 4 total — feasibility demonstration only). We identify three scientific limitations of the current framework: operators rely on expert-designed rules rather than learned statistical models; ground truth (algorithm success/failure) has not yet been collected; and diagnostic state labels have not been validated by clustering analysis. Prospective validation on n ≥ 50 independent sessions is required before statistical claims about generalization can be made. The dataset, code, and QDI system are openly available.
Abstract We introduce Quantum Diagnostic Intelligence (QDI), a five-layer decision-support architecture for inferring the operational state of quantum processing units from circuit-level measurements. Pulse-level calibration metrics — coherence times T₁ and T₂ measured through single-qubit Rabi and Ramsey sequences — are the dominant industry standard for certifying quantum hardware health. We demonstrate, through 191 circuit executions on three 156-qubit IBM Heron r2 processors, that circuit-level measurements contain diagnostic information that T₁/T₂ may not capture. On ibm_marrakesh between July 3 and July 5, 2026, IBM-reported T₂ improved from 303 to 340 µs (+ 12%), while circuit-level GHZ scaling yielded α = 3.811, a QDI health score of 37.8/100 [95% CI: 7.6, 67.9], and a circuit infidelity increase of 920% at n = 2 qubits. The QDI architecture formalizes this observation through four operators: a diagnostic state classifier D(χ), a health score H(χ), a recommendation generator R(χ), and a drift forecast F(χ, t). Rules trained on ibm_kingston correctly classified ibm_fez and both ibm_marrakesh sessions without retuning (3/3 held-out tests; n = 4 total — feasibility demonstration only). We identify three scientific limitations of the current framework: operators rely on expert-designed rules rather than learned statistical models; ground truth (algorithm success/failure) has not yet been collected; and diagnostic state labels have not been validated by clustering analysis. Prospective validation on n ≥ 50 independent sessions is required before statistical claims about generalization can be made. The dataset, code, and QDI system are openly available.
Pulse-level calibration metrics — coherence times T₁ and T₂ measured through single-qubit Rabi and Ramsey sequences — are the standard by which quantum hardware providers certify device health. We demonstrate, through 191 circuit executions on three 156-qubit IBM Heron r2 processors (ibm_kingston, ibm_fez, and ibm_marrakesh), that these pulse-level metrics can give opposite conclusions to circuit-level diagnostics on the same device at the same time. Specifically, between experimental sessions on July 3 and July 5, 2026, IBM reported ibm_marrakesh T₂ improved from 303 μs to 340 μs (a 12% improvement), while the K–R scaling exponent α measured from GHZ circuit scaling increased from 1.406 to 3.811 (a 171% increase in coherent error dominance) and GHZ n=2 infidelity rose from 0.018 to 0.204 — a 920% increase in circuit error. We further demonstrate that Ramsey circuit-context T₂ on qubit 0 is approximately 9–30 μs, compared to IBM-reported pulse-level T₂ of 32–340 μs — a discrepancy of 3–11×. We introduce five experimental demonstrations showing K–R circuit-level diagnostics detect degradation invisible to T₁/T₂, provide higher temporal sensitivity, enable algorithm failure prediction, and confirm the theoretical prediction αₜᵥₜᶜʰ + αₑₜₕₒ = 2 within 7% on real hardware. These findings establish circuit-level K–R diagnostics as a necessary complement to pulse-level calibration for operational quantum computing.
Abstract Pulse-level calibration metrics — coherence times T₁ and T₂ measured through single-qubit Rabi and Ramsey sequences — are the standard by which quantum hardware providers certify device health. We demonstrate, through 191 circuit executions on three 156-qubit IBM Heron r2 processors (ibm_kingston, ibm_fez, and ibm_marrakesh), that these pulse-level metrics can give opposite conclusions to circuit-level diagnostics on the same device at the same time. Specifically, between experimental sessions on July 3 and July 5, 2026, IBM reported ibm_marrakesh T₂ improved from 303 µs to 340 µs (a 12% improvement), while the K–R scaling exponent α measured from GHZ circuit scaling increased from 1.406 to 3.811 (a 171% increase in coherent error dominance) and GHZ n = 2 infidelity rose from 0.018 to 0.204 — a 920% increase in circuit error. We further demonstrate that Ramsey circuit-context T₂ on qubit 0 is approximately 9–30 µs, compared to IBM-reported pulse-level T₂ of 32–340 µs — a discrepancy of 3–11×. We introduce five experimental demonstrations showing K–R circuit-level diagnostics detect degradation invisible to T₁/T₂, provide higher temporal sensitivity, enable algorithm failure prediction, and confirm the theoretical prediction αₜ v ₜᶜʰ + αₑₜₕₒ = 2 within 7% on real hardware. These findings establish circuit-level K–R diagnostics as a necessary complement to pulse-level calibration for operational quantum computing.
We report the first experimental validation of a scalable, non-invasive quantum processor diagnostic system at 64-qubit scale. The TRUE Zigzag protocol characterizes T1 and T2 coherence properties of all target qubits simultaneously within a single job execution, producing a complete qubit health map from only three job submissions. Tested on IBM Quantum's ibm_fez backend (8,192 shots), the system graded all 64 qubits from EXCELLENT to UNSTABLE with baseline-to-after stability of 0.985→0.985, confirming non-invasive operation. Central discovery — Decreasing Scaling Law: Average diagnostic disturbance measured 0.252% at 8 qubits, 0.146% at 32 qubits, and 0.148% at 64 qubits, representing 92.7% improvement over linear scaling predictions. The 64Q/32Q ratio of 1.01× demonstrates plateau behavior, indicating no accuracy loss at arbitrarily larger scales. All three IBM Quantum Job IDs are publicly disclosed for independent verification. Full per-qubit data (CSV), experimental metadata (JSON), and visualization (PNG) are included. Patent: KR 10-2025-0180416
We report three experimental tests of Unified Structural Theory (UST) predictions on IBM quantum hardware (ibm_fez and ibm_marrakesh, 156-qubit Heron r3 processors, March 16-17, 2026). (1) The UST T₁ predictor predicted 51 μs for the assigned Nb transmon qubit; measured value was 48.1 μs (6.0% error). (2) Crystal coupling topology based on I4/mmm layered structure improved W-state protection by 2.4× at N=3 qubits; gate overhead dominated at N≥9, demonstrating that native crystal coupling is required for scalable protection. (3) A variational quantum neural network (5 qubits, 30 parameters) trained on XOR achieved 100% accuracy on real hardware with 91% average confidence and 0.82 output separation. Channeled decoherence (mimicking crystal drain layers) produced lower training loss than noiseless operation, demonstrating that structured decoherence acts as computational regularization. All results obtained on hardware not owned, operated, or calibrated by the author.
We introduce the Qubit Burden Index (QuBI), a dimensionless figure of merit that quantifies the ratio of nuclear spin bath complexity to quantum computational capability for any qubit platform. QuBI is defined as QuBI = (Nbath × Miso) / (T̂2 × F × η × S), where T̂2 = T2/Tref is the normalized Hahn echo coherence time (Tref = 1 μs), the numerator captures the spin-bath decoherence burden (bath size Nbath times isotopic multiplicity Miso), and the denominator captures effective computational capability (normalized coherence time T̂2, circuit fidelity F, readout efficiency η, and thermal stability S). We report the first hardware validation of both QuBI components on IBM’s ibm_torino 133-qubit Heron processor. The denominator validation (10 GHZ-state circuits, 4,000 shots each) demonstrates that the multiplicative-independence fidelity model predicts hardware performance to within 11% for 4-qubit systems through depth 7, using only public calibration data with no fitted parameters. The numerator validation (44 central-spin FID circuits, 8,000 shots each) reproduces the T2* = 248 ns decay envelope predicted by exact diagonalization of a CdSe electron-nuclear hyperfine Hamiltonian. The transmon architecture serves as a control case with QuBI = 0 (zero nuclear spin bath), confirming denominator independence from the numerator. A cross-platform comparison spanning four orders of magnitude—from Si-28 spin qubits (QuBI = 0.0015) to natural-abundance CdSe quantum dots (QuBI = 56,373)—demonstrates that QuBI provides a physically grounded, single-number comparison metric across fundamentally different qubit technologies.
As quantum processors scale beyond 100 qubits, distinguishing software bugs from stochastic hardware noise becomes a critical diagnostic challenge. We present a neuro-fuzzy framework that addresses this attribution problem by combining Adaptive Neuro-Fuzzy Inference Systems (ANFIS) with physics-grounded feature engineering. We introduce the Bhattacharyya veto, a hard constraint calibrated to the empirically characterized noise floor of the device, which classifies as buggy any output distribution whose divergence from the ideal exceeds what the device's noise produces under normal operation. The framework is validated on two IBM Heron r2 processors. On ibm_fez, across 105 circuits spanning 17 algorithm families, it attains 89.5% accuracy (Wilson 95% CI [82.2, 94.0]) with no abstentions; every residual error is a bug whose ideal computational-basis distribution is identical to the intended circuit's, or whose divergence lies below the device's noise floor. On a held-out suite of 30 deeper circuits (ISA depth to 100) executed on ibm_kingston, with all thresholds frozen, it attains 96.7% effective and 93.3% strict accuracy. We resolve key ambiguities - such as distinguishing correct Grover amplification from bug-induced collapse - and identify fundamental limits of single-basis diagnostics, including a Z-basis blind spot where phase-only errors remain statistically invisible. The extracted rule base is analyzed rather than asserted: the learned rules reproduce the physics of the veto, of the Grover boundary, and of depth-dependent noise without any of them being hard-coded. This work establishes an interpretable diagnostic layer that prevents error mitigation from being applied to logically flawed circuits.