Point-to-point optical wireless communication (OWC) systems and derived point-to-multipoint optical Internet of Things (O-IoT) broadcasting networks can serve as a secure and reliable means for information protection, emergency communication, and confidentiality management within localized environments. Meanwhile, they may also act as potential tools for covert eavesdropping, weak signal detection, or latent surveillance. We summarize recent advances and potential progress in physical-layer security (PLS) of OWC. Furthermore, several case studies are presented, covering a broad spectral range from ultraviolet to near-infrared (NIR), to illustrate how system-level OWC architectures can enable or defend against optical attacks, interception, and confidential transmission. These cases involve both hardware- and software-defined implementations, including photon counting, digital signal processing, and protocol design, highlighting practical approaches for optical information security management, covert transmission, eavesdropping, and weak signal detection. The discussed methods provide complementary solutions for the design and deployment of secure LANs in the emerging information security era
Point-to-point optical wireless communication (OWC) systems and derived point-to-multipoint optical Internet of Things (O-IoT) broadcasting networks can serve as a secure and reliable means for information protection, emergency communication, and confidentiality management within localized environments. Meanwhile, they may also act as potential tools for covert eavesdropping, weak signal detection, or latent surveillance. We summarize recent advances and potential progress in physical-layer security (PLS) of OWC. Furthermore, several case studies are presented, covering a broad spectral range from ultraviolet to near-infrared (NIR), to illustrate how system-level OWC architectures can enable or defend against optical attacks, interception, and confidential transmission. These cases involve both hardware- and software-defined implementations, including photon counting, digital signal processing, and protocol design, highlighting practical approaches for optical information security management, covert transmission, eavesdropping, and weak signal detection. The discussed methods provide complementary solutions for the design and deployment of secure LANs in the emerging information security era
As the existing radio-frequency (RF) networks cannot meet the ever-increasing data rate demand, the optical wireless communication (OWC), which uses a wide untapped unregulated spectrum, has been proposed as a promising technology to overcome the RF spectrum limitations. On the other hand, with the increasing demand for high data rate and the prevalence of the broadcast-nature networks, researchers have recently come up with new mechanisms to improve secure communication using physical layer techniques. Compared to RF networks, the OWC networks are more secure and less susceptible to the interception because of the small coverage provided by LEDs, and because they work properly only in the presence of the line-of-sight (LoS) components. However, the security in OWC networks is still an issue, especially in visible light communication (VLC) when the transmitted information can be accessed by multiple users as in public areas, meeting rooms, laboratories, and libraries. That means potential eavesdroppers may be existing to gather confidential messages. This paper reviews all the conducted work on physical layer security (PLS) in two types of OWC networks, which are the VLC and free space optical (FSO) networks. Furthermore, the paper proposes several open problems in these networks to optimize and enhance the security performance.
With the demand for economical and high-speed wireless services, Optical Wireless Communication (OWC) has attracted increasing attention in both research and the market. In the past decades, numerous optical-related techniques (e.g., LEDs, displays, cameras) and systems (e.g., VLC, LiFi, LiDAR) have been invented. OWC techniques, which are considered as a competitive mechanics in next-generation networks as an alternative to RF approaches, offer 10,000 times more bandwidth than conventional radio frequency (RF)-based wireless techniques (e.g., WiFi, LoRa, Bluetooth, LTE), as well as tremendous spatial reuse potential with even less interference. Because optical communications have a limited wavelength and travel in the line of sight (LoS) manner, the OWC is commonly thought as a secure wireless approach to confine light transmissions within physical bounds. However, in the real world, it is completely untrue. The privacy leakages and security risks broadly exist in the optical-related wireless applications including OWC networks. These threats and weaknesses have recently been the subject of several initial studies. However, they lack systematic analysis and are isolated. This survey first presents a general workflow of OWC systems, which consists of three stages: before signal emission (BSE), during signal propagation (DSP), and after signal receiving (ASV). For each stage, related risks are reviewed. Then, we summarize existing attacks in optical-related wireless applications and corresponding counter-attack solutions. Finally, we outline the future trends for improving OWC security.
The pervasiveness of commercial Internet of Things (IoT) around the globe is expected to reach significant levels with the upcoming sixth generation of mobile networks (6G). Throughout the past years, wireless standardization units worldwide have been prominently active in the deployment and performance optimization of such IoT networks and fusing them with current and futuristic cellular networks. Nonetheless, the openness of wireless transmissions and the forecasted overwhelm in connected devices will provoke unprecedented security leakages and vulnerabilities. In addition to the key targets of the 6G and IoT, it has been of paramount importance to cater to decent and lightweight security mechanisms in ultra-massively connected heterogeneous networks. Recently, significant efforts have been made to pave the way for the integration of physical layer security (PLS) in contemporary and futuristic networks. The primary motivation behind its deployment resides in its low complexity and ability to provide information-theoretic secure transmissions, which alleviates the complexity burden caused by implementing complex cryptographic schemes. This survey overviews the recent advancement in PLS techniques with a particular interest in its application to the Internet of Things (IoT). We review essentially recent PLS techniques aiming at ensuring message confidentiality along with node/message authentication and malicious nodes’ detection, where their corresponding application scenarios and underlying pros and cons are discussed. On top of that, we explore recent findings in the incorporation of cutting-edge technologies at the physical layer, such as non-orthogonal multiple-access, reconfigurable intelligent surfaces, joint communication and sensing, and optical wireless/Terahertz communications in boosting confidentiality and authentication at the physical layer. Lastly, promising extensions and future directions are discussed based on the quantified pros and cons of each PLS category, opening up ways for timely research directions within the topic and current/future challenges faced by PLS.
Underwater wireless optical communications are a developing alternative to meet the increasing need for high-speed connections in oceans and seas. Optical wireless communications (OWCs) are more secure and less susceptible to eavesdropping compared to acoustic communications or radio frequency (RF) communications due to their narrow optical beam coverage and reliance on line-of-sight components. Nevertheless, the existence of a hostile eavesdropper can compromise the level of confidentiality achieved by OWC networks. This article provides a concise overview of the latest research conducted on physical layer security (PLS) in underwater optical wireless communication (UOWC). Furthermore, this work presents the relevant unresolved matters, approaches for enhancing secrecy performance, and potential areas for further research.
Optical wireless communication (OWC) has emerged as one promising candidate to mitigate the frequency spectrum crisis. Due to the broadcast nature of OWC channel, physical layer security (PLS) techniques have been considered and explored to improve the transmission confidentiality of OWC links. However, almost all current schemes focus on scenarios including multiple transmitters and fail to match the scenarios with limited transmitters, even single transmitter. For addressing this issue, in this work, the dynamic optical beam based PLS enhancement scheme is proposed. Unlike conventional Lambertian beam based technique paradigm, the above scheme tentatively utilize the commercially available non-Lambertian beam to configure the secure OWC links. Numerical results show that, compared with about 1.10 bps/Hz average secrecy capacity (SC) of the conventional configuration, up to 1.93 bps/Hz average SC gain could be provided by the proposed dynamic beam scheme. Moreover, this potential gain will be increased to about 2.39 bps/Hz when the diversity combing is available for the legitimate user receiver.
Wireless communications systems are particularly vulnerable to security attacks because of the inherent openness of the transmission medium. In this article, we focus on guaranteeing confidentiality against eavesdropping attacks where an unauthorized entity aims to intercept an ongoing wireless communication, and we provide a comprehensive summary of recent advances in the area of physical-layer security that guarantees confidentiality by using cooperative techniques unique to the wireless medium. These cooperative techniques consist of carefully designed coding and signaling schemes that are able to harness the properties of the physical layer and to ensure some level of information-theoretic security.