The rapid proliferation of the Internet of Things (IoT) has connected billions of devices that continuously exchange sensitive data over public wireless channels, making secure authentication a critical requirement. However, most IoT end devices are severely resource-constrained, which renders conventional public-key infrastructures based on RSA, bilinear pairings, or digital certificates impractical. Although many authentication and key agreement schemes have been proposed, recent cryptanalytic studies show that they often either omit essential security properties such as perfect forward secrecy or resistance to ephemeral secret leakage or incur overhead that is unacceptable for low-power nodes. To address this gap, this paper proposes a lightweight Elliptic Curve Cryptography (ECC)-based authentication and key agreement protocol for a three-tier IoT architecture consisting of a user, a semi-trusted gateway server, and an IoT sensor. The protocol relies solely on elliptic-curve scalar multiplication, one-way hash functions, and bitwise XOR operations, avoiding bilinear pairings and certificate management. It achieves mutual authentication among all three parties through timestamped, hash-based authenticators and establishes a contributory session-key derived from fresh ephemeral keys, ensuring perfect forward secrecy. The security of the protocol is established through a detailed informal analysis, demonstrating resistance to major attacks, and is formally verified using the AVISPA tool, where both the OFMC and CL-AtSe back-ends report the protocol as SAFE under the Dolev–Yao adversary model. A comparative performance evaluation against several recent ECC-based authentication schemes shows that the proposed protocol maintains low cost requirements suitable for constrained IoT devices, and resulting in a communication overhead of 1828 bits, which is competitive with most recent ECC-based schemes evaluated, and imposing a minimal storage burden on end devices. The results demonstrate that the proposed protocol achieves a favorable balance between security and efficiency, making it well suited to resource-constrained IoT environments.
The rapid proliferation of the Internet of Things (IoT) has connected billions of devices that continuously exchange sensitive data over public wireless channels, making secure authentication a critical requirement. However, most IoT end devices are severely resource-constrained, which renders conventional public-key infrastructures based on RSA, bilinear pairings, or digital certificates impractical. Although many authentication and key agreement schemes have been proposed, recent cryptanalytic studies show that they often either omit essential security properties such as perfect forward secrecy or resistance to ephemeral secret leakage or incur overhead that is unacceptable for low-power nodes. To address this gap, this paper proposes a lightweight Elliptic Curve Cryptography (ECC)-based authentication and key agreement protocol for a three-tier IoT architecture consisting of a user, a semi-trusted gateway server, and an IoT sensor. The protocol relies solely on elliptic-curve scalar multiplication, one-way hash functions, and bitwise XOR operations, avoiding bilinear pairings and certificate management. It achieves mutual authentication among all three parties through timestamped, hash-based authenticators and establishes a contributory session-key derived from fresh ephemeral keys, ensuring perfect forward secrecy. The security of the protocol is established through a detailed informal analysis, demonstrating resistance to major attacks, and is formally verified using the AVISPA tool, where both the OFMC and CL-AtSe back-ends report the protocol as SAFE under the Dolev–Yao adversary model. A comparative performance evaluation against several recent ECC-based authentication schemes shows that the proposed protocol maintains low cost requirements suitable for constrained IoT devices, and resulting in a communication overhead of 1828 bits, which is competitive with most recent ECC-based schemes evaluated, and imposing a minimal storage burden on end devices. The results demonstrate that the proposed protocol achieves a favorable balance between security and efficiency, making it well suited to resource-constrained IoT environments.
With the rise of the Internet of Things (IoT), maintaining data confidentiality and protecting user privacy have become increasingly challenging. End devices in the IoT are often deployed in unattended environments and connected to open networks, making them vulnerable to physical tampering and other security attacks. Different authentication key agreement (AKA) schemes have been used in practice; several of them do not cover the necessary security features or are incompatible with resource-constrained end devices. Their security proofs have been performed under the Random-Oracle model. We present an AKA protocol for end devices and servers. The proposal leverages the ECC-based key exchange mechanism and one-way hash function-based message authentication method to achieve mutual authentication, user anonymity, and forward security. A formal security proof of the proposed scheme is performed under the standard model and the eCK model with the elliptic curve encryption computational assumptions, and formal verification is performed with ProVerif. According to the performance comparison, it is revealed that the proposed scheme offers user anonymity, perfect forward security, and mutual authentication, and resists typical attacks such as ephemeral secret leakage attacks, impersonation attacks, man-in-the-middle attacks, and key compromise impersonation attacks. Moreover, the proposed scheme has the lowest computational and communication overhead compared to existing schemes.
Due to the constrained computational and communication capabilities of Power Internet of Things (PIoT) devices, existing authentication and key agreement protocols often incur non-negligible online cryptographic and communication overhead, while inter-device communication remains vulnerable to security threats. To address these issues, this paper proposes a lightweight authentication and key agreement protocol based on the SM9 identity-based cryptographic framework. Rather than directly applying the standard SM9 key exchange procedure, the proposed scheme uses the SM9 identity-based key infrastructure and bilinear-pairing operations as cryptographic building blocks and introduces a PIoT-oriented protocol structure. Specifically, pseudonymous identities and device-specific auxiliary parameters are generated during registration, mutual authentication is completed through two transmitted messages forming one request-response round, and the authenticated intermediate parameters are reused to derive the session key without an additional key-exchange message. By moving part of the identity-related processing to the registration phase and reusing the authenticated parameters during session-key derivation, the proposed protocol reduces the online computational and interaction overhead of resource-constrained devices. Meanwhile, the scheme supports device anonymity, pseudonym-based unlinkability, and forward/backward secrecy of session keys. Security analysis under the Dolev–Yao model shows that the proposed scheme can resist the network attacks considered in the adopted threat model. Comparative evaluation demonstrates that a complete mutual authentication and key agreement process requires only 24.68 ms of computational cost and 1,408 bits of communication overhead, outperforming several representative lightweight and low-overhead authentication schemes in both computational and communication efficiency. These results indicate the potential of the proposed scheme for large-scale, heterogeneous, and resource-constrained PIoT deployments.
Due to the openness of communication channels and the sensitivity of the data being collected and transmitted, securing data access and communication in IoT systems requires robust ECC-based authentication and key agreement (AKA) protocols. However, designing an AKA protocol for IoT presents significant challenges, as most IoT sensors are deployed in resource-constrained, unattended environments with limited computational power, connectivity, and storage. To achieve anonymous authentication, existing solutions typically rely on shared temporary public keys to mask device IDs or validate sender certificates, which increases the computational overhead. Furthermore, these protocols often fail to address crucial security concerns, such as nonresistance to ephemeral secret leakage (ESL) attacks and a lack of perfect forward security. To mitigate the computational burden, we propose a dynamic authenticated credentials (DACs) synchronization framework for anonymous authentication. Then, we introduce an ECC-based AKA scheme that employs DACs in place of temporary public keys or sender credentials, enabling efficient and secure anonymous authentication. The security of the proposed protocol was rigorously verified under the Real-or-Oracle model and validated using ProVerif. Performance comparisons demonstrate that our scheme offered significant improvements in security, with an over 37% reduction in communication cost and computational overhead.
Wireless Sensor Networks (WSNs) are integral to Internet-of-Things (IoT) infrastructures, yet cloud-mediated architectures and resource constraints expose them to impersonation, replay, and session hijacking attacks. Traditional Public-Key Infrastructure (PKI) and Elliptic Curve Cryptography (ECC) impose prohibitive overhead on lightweight sensor nodes. This paper proposes a lightweight two-phase authentication protocol for cloud-mediated WSNs that achieves three-party contributory session key agreement and periodic HKDF-based key ratcheting using only symmetric primitives. The registration phase establishes master keys via PBKDF2-derived user credentials and hardware-generated sensor keys, while the authentication phase uses HKDF-SHA256, HMAC-SHA256, and XOR-masked nonce tokens to provide unified mutual authentication over four messages, with a semi-trusted gateway unable to derive the session key. Formal analysis with Scyther confirms mutual authentication, replay resistance, and gateway-compromise resilience. Performance evaluation shows that the protocol eliminates asymmetric operations, achieving 96.6% lower sensor-side computation cost than ECC-based SAPWSN and 18.8% lower communication overhead than Chen et al.’s three-party scheme, with only 2 HKDF and 2 HMAC operations per sensor authentication and 501 bytes of total communication.
In the Internet of Things (IoT) environment, more types of devices than ever before are connected to the internet to provide IoT services. Smart devices are becoming more intelligent and improving performance, but there are devices with little computing power and low storage capacity. Devices with limited resources will have difficulty applying existing public key cryptography systems to provide security. Therefore, communication protocols for various kinds of participating devices should be applicable in the IoT environment, and these protocols should be lightened for resources-restricted devices. Security is an essential element in the IoT environment, so for secure communication, it is necessary to perform authentication between the communication objects and to generate the session key. In this paper, we propose two kinds of lightweight authentication and key agreement schemes to enable fast and secure authentication among the objects participating in the IoT environment. The first scheme is an authentication and key agreement scheme with limited resource devices that can use the elliptic curve Qu-Vanstone (ECQV) implicit certificate to quickly agree on the session key. The second scheme is also an authentication and key agreement scheme that can be used more securely, but slower than first scheme using certificateless public key cryptography (CL-PKC). In addition, we compare and analyze existing schemes and propose new schemes to improve security requirements that were not satisfactory.
In this paper, targeting efficient authentication and key agreement in an IoT environment, we propose an Elliptic Curve Cryptography-(ECC) based lightweight authentication protocol called BCmECC which relies on a public blockchain to validate the users’ public key to provide desired security. We evaluate the security of the proposed protocol heuristically and validate it formally, which demonstratse the high level of the security. For the formal verification we used the widely accepted formal methods, i.e., BAN logic and the Scyther tool. In this paper we also analyse the security of recently proposed blockchain-based authentication protocols and show that this protocol does not provide the desired security against known session-specific temporary information attacks in which the adversary has access to the session’s ephemeral values and aims to retrieve the shared session key. In addition, the protocol lacks forward secrecy, in which an adversary with access to the server’s long-term secret key can retrieve the previous session keys, assuming that the adversary has already eavesdropped the transferred messages over a public channel in the target session. The proposed attacks are very efficient and their success probability is ‘1’, while the time complexity of each attack could be negligible. Besides, we show that BCmECC is secure against such attacks.