Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Full-Circuit Modeling and Nonlinear Analysis of Flux-Pumped SQUID Amplifiers in Keysight Advanced Design System (ADS)

Mohamed Ismail Abdelrahman, Saesun Kim, Philip Krantz, Eric T. Holland, Mohamed Awida Hassan

Published Jun 7, 2026• 0 citations
Publisher

Abstract

SQUID-based parametric amplifiers offer high gain, quantum-limited added noise, and wide tunability across the GHz spectrum. In this work, we present a full-circuit modeling of flux-pumped SQUID amplifiers for the first time in a commercial circuit solver (Keysight ADS) that rigorously incorporates flux quantization in the SQUID loop and the nonlinear dynamics of the Josephson junctions. Harmonic-balance analysis reproduces published small-signal gain characteristics and, in addition, reveals Duffing-type hysteresis responsible for amplifier bistability in the large-signal regime. This paper provides microwave engineers with a comprehensive circuit-level framework for flux-pumped quantum amplifier design that ensures monostable behavior.

DOI
10.1109/imsrftt43070.2026.11602541

Related papers

Modeling Flux-Quantizing Josephson Junction Circuits in Keysight ADS

Ofer Naaman, Mohamed H. Awida, T. White +4 more

We introduce Josephson junction and inductor models in Keysight Advanced Design System that feature an auxiliary flux port, and facilitate the expression of flux quantization conditions in simulation of superconducting microwave circuits. We present several examples that illustrate our methodology for constructing flux-quantizing circuits, including dc- andrf-SQUIDs, tunable couplers, and parametric amplifiers using superconducting nonlinear asymmetric inductive element and rf-SQUID arrays. We perform dc, S-parameter, and harmonic balance simulations to validate our models and methods against theory and published experimental results.

arXiv:2408.07861•IEEE Transactions on Applied Superconductivity•Jan 15, 2025•15 citations

Flux-Driven Josephson Parametric Amplifiers Based on an RF SQUID and DC SQUID in Keysight ADS

Keith Krause, Michael C. Hamilton, Mark L. Adams

Josephson parametric amplifiers (JPAs) have become an important component of superconducting applications. Simulating these circuits is vital for optimizing their performance, including their gain and stability. Previously, simulating JPAs has been inefficient due to the limits of using SPICE-based simulators that work in the time domain. JPAs are better suited to frequency domain simulations over a broad frequency range and parameter space. We present JPA simulations using the recently released flux-aware Josephson junction (JJ) and inductor models in Keysight Advanced Design Systems (ADS). We simulate two different flux-driven JPAs: one based on an RF SQUID, and another based on a DC SQUID. We efficiently run harmonic balance simulations over a wide range of circuit parameters. We compare the use of RF and DC SQUIDs in these JPAs by analyzing their simulation results. This work provides a foundation for future SQUID-based JPA simulations in Keysight ADS.

IEEE Transactions on Applied Superconductivity•Dec 19, 2025•0 citations

Simulation of a flux-pumped Josephson parametric amplifier with a detailed SQUID model using the harmonic balance method

Kaiyong He, Genting Dai, Qing Yu +4 more

Abstract This work presents an analysis of a flux-pumped Josephson parametric amplifier (JPA) with a detailed superconducting quantum interference device (SQUID) model, using the harmonic balance (HB) method in Keysight’s Advanced Design System. The model is built using the generalized resistively shunted junction model of a Josephson junction and the quantization condition of a SQUID, incorporating the effects of the geometric inductance and parasitic parameters. This approach is used to simulate the behavior of an unmatched lumped element JPA and an impedance-matched JPA, showing the necessity of the detailed SQUID model for the simulation of a broadband JPA by comparison with the results based on a widely used, simplified model. Gain profiles obtained from the approach are consistent with existing experiments in the literature, with reasonable accuracy. Due to the HB method, the simulation is of high efficiency, making it feasible to sweep and optimize parameters. This provides a useful method for the analysis of Josephson parametric amplification and the design of a JPA.

Superconductor Science and Technology•Jan 18, 2023•9 citations

Analysis of Multistable Superconducting Quantum Interference Devices (Squids) in Keysight Advanced Design System

Mohamed Ismail Abdelrahman, Joseph Macauley, Mohamed Awida Hassan

Superconducting Quantum Interference Devices (SQUIDs) exhibit exceptional magnetic flux sensitivity due to superconducting phase interference enforced by flux quantization in a closed loop of Josephson junctions (JJs). Under certain bias conditions, JJ nonlinearity induces multistability, creating multiple potential energy minima—critical for designing robust, tunable superconducting qubits. Locating these extrema traditionally requires brute-force parameter scans, which are computationally expensive and poorly integrated into circuit workflows. We introduce the SQUID Extrema Analysis Tool, the first of its kind in a commercial circuit solver (Keysight ADS), implementing the approach of Miano et al. (PRX Quantum 4, 030324, 2023). The tool identifies stable states and extracts associated key physical quantities such as SQUID circulating current, potential energy, and effective inductance, enabling the design and optimization of multistable superconducting circuits.

•Jun 7, 2026•0 citations

High-gain and large-bandwidth Josephson parametric amplifier influenced by Fabry-Pérot interference

Shingo Kono, Jesper Ilves, Arjan F. van Loo +8 more

Quantum-limited parametric amplifiers are essential components for many quantum technologies operating in the microwave domain. Achieving both high gain and broad bandwidth, however, remains challenging due to trade-offs between gain and bandwidth, pump efficiency, and dynamic range. Moreover, high-gain broadband amplifiers become increasingly sensitive to their external electromagnetic environment, which can distort their gain spectra and hinder reliable operation. Here, we present an accurate theoretical model and a systematic design methodology for a flux-driven, lumped-element Josephson parametric amplifier based on a SQUID array. Our device achieves near-quantum-limited, phase-preserving amplification with a net gain of 20 (maximally 44) dB and a 3-dB bandwidth of $\sim$50 ($\lesssim$0.2) MHz. We further show that the gain spectra exhibit pronounced sensitivity to weak reflections in the input-output waveguide caused by impedance mismatches in the microwave environment. By incorporating Fabry-Pérot-type interference into a quantum input-output model, we analytically reproduce these complex spectral features and identify how they depend on the physical parameters of the environment. More generally, our results provide a practical framework for separating the intrinsic dynamics of parametric amplifiers from environmental effects. This approach enables reliable characterization and optimization of amplifier performance while providing a systematic strategy for diagnosing microwave reflections and engineering environmental interference to shape amplifier gain spectra, thereby offering a pathway toward robust, reproducible, and truly quantum-limited microwave amplification.

quant-pharXiv:2604.13881•Apr 16, 2026•1 citation

Negative-resistance models for parametrically flux-pumped superconducting quantum interference devices

K. M. Sundqvist, Per Delsing

A Superconducting QUantum Interference Device (SQUID) modulated by a fast oscillating magnetic flux can be used as a parametric amplifier, providing gain with very little added noise. Here, we develop linearized models to describe the parametrically flux-pumped SQUID in terms of an impedance. An unpumped SQUID acts as an inductance, the Josephson inductance, whereas a flux-pumped SQUID develops an additional, parallel element which we have coined the “pumpistor.” Parametric gain can be understood as a result of a negative resistance of the pumpistor. In the degenerate case, the gain is sensitive to the relative phase between the pump and signal. In the nondegenerate case, gain is independent of this phase. We develop our models first for degenerate parametric pumping in the three-wave and four-wave cases, where the pump frequency is either twice or equal to the signal frequency, respectively. We then derive expressions for the nondegenerate case where the pump frequency is not a multiple of the signal frequency, for which it becomes necessary to consider idler tones that occur. For the nondegenerate three-wave case, we present an intuitive picture for a parametric amplifier containing a flux-pumped SQUID where current at the signal frequency depends upon the load impedance at an idler frequency. This understanding provides insight and readily testable predictions of circuits containing flux-pumped SQUIDs.

arXiv:1311.2063•EPJ Quantum Technology•Mar 7, 2014•29 citations
SQUID-based parametric amplifiers offer high gain, quantum-limited added noise, and wide tunability across the GHz spectrum. In this work, we present a full-circuit modeling of flux-pumped SQUID amplifiers for the first time in a commercial circuit solver (Keysight ADS) that rigorously incorporates flux quantization in the SQUID loop and the nonlinear dynamics of the Josephson junctions. Harmonic-balance analysis reproduces published small-signal gain characteristics and, in addition, reveals Duffing-type hysteresis responsible for amplifier bistability in the large-signal regime. This paper provides microwave engineers with a comprehensive circuit-level framework for flux-pumped quantum amplifier design that ensures monostable behavior.
We introduce Josephson junction and inductor models in Keysight Advanced Design System that feature an auxiliary flux port, and facilitate the expression of flux quantization conditions in simulation of superconducting microwave circuits. We present several examples that illustrate our methodology for constructing flux-quantizing circuits, including dc- andrf-SQUIDs, tunable couplers, and parametric amplifiers using superconducting nonlinear asymmetric inductive element and rf-SQUID arrays. We perform dc, S-parameter, and harmonic balance simulations to validate our models and methods against theory and published experimental results.
Josephson parametric amplifiers (JPAs) have become an important component of superconducting applications. Simulating these circuits is vital for optimizing their performance, including their gain and stability. Previously, simulating JPAs has been inefficient due to the limits of using SPICE-based simulators that work in the time domain. JPAs are better suited to frequency domain simulations over a broad frequency range and parameter space. We present JPA simulations using the recently released flux-aware Josephson junction (JJ) and inductor models in Keysight Advanced Design Systems (ADS). We simulate two different flux-driven JPAs: one based on an RF SQUID, and another based on a DC SQUID. We efficiently run harmonic balance simulations over a wide range of circuit parameters. We compare the use of RF and DC SQUIDs in these JPAs by analyzing their simulation results. This work provides a foundation for future SQUID-based JPA simulations in Keysight ADS.
Abstract This work presents an analysis of a flux-pumped Josephson parametric amplifier (JPA) with a detailed superconducting quantum interference device (SQUID) model, using the harmonic balance (HB) method in Keysight’s Advanced Design System. The model is built using the generalized resistively shunted junction model of a Josephson junction and the quantization condition of a SQUID, incorporating the effects of the geometric inductance and parasitic parameters. This approach is used to simulate the behavior of an unmatched lumped element JPA and an impedance-matched JPA, showing the necessity of the detailed SQUID model for the simulation of a broadband JPA by comparison with the results based on a widely used, simplified model. Gain profiles obtained from the approach are consistent with existing experiments in the literature, with reasonable accuracy. Due to the HB method, the simulation is of high efficiency, making it feasible to sweep and optimize parameters. This provides a useful method for the analysis of Josephson parametric amplification and the design of a JPA.
Superconducting Quantum Interference Devices (SQUIDs) exhibit exceptional magnetic flux sensitivity due to superconducting phase interference enforced by flux quantization in a closed loop of Josephson junctions (JJs). Under certain bias conditions, JJ nonlinearity induces multistability, creating multiple potential energy minima—critical for designing robust, tunable superconducting qubits. Locating these extrema traditionally requires brute-force parameter scans, which are computationally expensive and poorly integrated into circuit workflows. We introduce the SQUID Extrema Analysis Tool, the first of its kind in a commercial circuit solver (Keysight ADS), implementing the approach of Miano et al. (PRX Quantum 4, 030324, 2023). The tool identifies stable states and extracts associated key physical quantities such as SQUID circulating current, potential energy, and effective inductance, enabling the design and optimization of multistable superconducting circuits.
Quantum-limited parametric amplifiers are essential components for many quantum technologies operating in the microwave domain. Achieving both high gain and broad bandwidth, however, remains challenging due to trade-offs between gain and bandwidth, pump efficiency, and dynamic range. Moreover, high-gain broadband amplifiers become increasingly sensitive to their external electromagnetic environment, which can distort their gain spectra and hinder reliable operation. Here, we present an accurate theoretical model and a systematic design methodology for a flux-driven, lumped-element Josephson parametric amplifier based on a SQUID array. Our device achieves near-quantum-limited, phase-preserving amplification with a net gain of 20 (maximally 44) dB and a 3-dB bandwidth of $\sim50(50 (50(\lesssim$0.2) MHz. We further show that the gain spectra exhibit pronounced sensitivity to weak reflections in the input-output waveguide caused by impedance mismatches in the microwave environment. By incorporating Fabry-Pérot-type interference into a quantum input-output model, we analytically reproduce these complex spectral features and identify how they depend on the physical parameters of the environment. More generally, our results provide a practical framework for separating the intrinsic dynamics of parametric amplifiers from environmental effects. This approach enables reliable characterization and optimization of amplifier performance while providing a systematic strategy for diagnosing microwave reflections and engineering environmental interference to shape amplifier gain spectra, thereby offering a pathway toward robust, reproducible, and truly quantum-limited microwave amplification.
A Superconducting QUantum Interference Device (SQUID) modulated by a fast oscillating magnetic flux can be used as a parametric amplifier, providing gain with very little added noise. Here, we develop linearized models to describe the parametrically flux-pumped SQUID in terms of an impedance. An unpumped SQUID acts as an inductance, the Josephson inductance, whereas a flux-pumped SQUID develops an additional, parallel element which we have coined the “pumpistor.” Parametric gain can be understood as a result of a negative resistance of the pumpistor. In the degenerate case, the gain is sensitive to the relative phase between the pump and signal. In the nondegenerate case, gain is independent of this phase. We develop our models first for degenerate parametric pumping in the three-wave and four-wave cases, where the pump frequency is either twice or equal to the signal frequency, respectively. We then derive expressions for the nondegenerate case where the pump frequency is not a multiple of the signal frequency, for which it becomes necessary to consider idler tones that occur. For the nondegenerate three-wave case, we present an intuitive picture for a parametric amplifier containing a flux-pumped SQUID where current at the signal frequency depends upon the load impedance at an idler frequency. This understanding provides insight and readily testable predictions of circuits containing flux-pumped SQUIDs.