We study the temperature-dependent microwave response of high-kinetic-inductance superconducting resonators fabricated in Albanova's Nanolab as a part of the LKIPA device project. The investigated devices are based on circuit layouts designed for kinetic-inductance parametric amplification but are characterized using single-tone microwave measurements. We first compare the resonance parameters of different circuit designs to discuss and evaluate the performance of some fabricated resonators. A selected device is then measured in a cryostat, between 1.7 K and 3.0 K, to investigate how the resonance frequency, internal and external loss rates, and Kerr nonlinearity depend on temperature. The results show that the temperature dependence of the resonance frequency and external loss rate can be well described using a Mattis-Bardeen approach for linear responses in the investigated temperature interval. The internal loss rate, however, requires additional resistive channels beyond quasiparticle losses. By investigating near-resonance nonlinearities, we also demonstrate that nonlinear effects are less prominent when the temperature is increased. Deviations between the scattering fit and measured data are also discussed to evaluate possible limitations of the scattering model.
We study the temperature-dependent microwave response of high-kinetic-inductance superconducting resonators fabricated in Albanova's Nanolab as a part of the LKIPA device project. The investigated devices are based on circuit layouts designed for kinetic-inductance parametric amplification but are characterized using single-tone microwave measurements. We first compare the resonance parameters of different circuit designs to discuss and evaluate the performance of some fabricated resonators. A selected device is then measured in a cryostat, between 1.7 K and 3.0 K, to investigate how the resonance frequency, internal and external loss rates, and Kerr nonlinearity depend on temperature. The results show that the temperature dependence of the resonance frequency and external loss rate can be well described using a Mattis-Bardeen approach for linear responses in the investigated temperature interval. The internal loss rate, however, requires additional resistive channels beyond quasiparticle losses. By investigating near-resonance nonlinearities, we also demonstrate that nonlinear effects are less prominent when the temperature is increased. Deviations between the scattering fit and measured data are also discussed to evaluate possible limitations of the scattering model.
Abstract We study the response of several microwave resonators made from superconducting NbTiN thin-film meandering nanowires with large kinetic inductance, having different circuit topology and coupling to the transmission line. Reflection measurements reveal the parameters of the circuit and analysis of their temperature dependence in the range 1.7–6 K extract the superconducting energy gap and critical temperature. The lumped-element LC resonator, valid in our frequency range of interest, allows us to predict the quasiparticle (QP) contribution to internal loss, independent of circuit topology and characteristic impedance. Our analysis shows that the internal quality factor is limited not by thermal-equilibrium QP, but an additional temperature-dependent source of internal microwave loss.
Superconducting boron-doped silicon is a promising material for integrated silicon quantum devices. In particular, its low electronic density and moderate disorder make it a suitable candidate for the fabrication of large inductances with low losses at microwave frequencies. We study experimentally the electrodynamics of superconducting silicon thin layers using coplanar waveguide resonators, focusing on the kinetic inductance, the internal losses, and the variation of these quantities with the resonator readout power. We report the observation in a doped semiconductor of microwave resonances with internal quality factors of a few thousand. As expected in the BCS framework, superconducting silicon presents a large sheet kinetic inductance in the 50--500-pH range, comparable to that of strongly disordered superconductors. The temperature dependence of the kinetic inductance is well described by the Mattis-Bardeen theory. However, we find an unexpectedly strong nonlinearity in the complex surface impedance that cannot be satisfactorily explained either by depairing or by quasiparticle heating.
Abstract Superconducting resonators and parametric amplifiers are important components in scientific systems such as kinetic inductance detector arrays, frequency-domain multiplexers for other superconducting bolometers, spin-ensemble based memories, and circuit quantum electrodynamics demonstrators. In this paper, we report microwave measurements of superconducting Ti, Nb, and NbN resonators and their use as parametric amplifiers. These half-wave resonators were fabricated under near identical sputtering and lithographic conditions to ensure a like-for-like comparison of material properties. We report a wide range of properties and behaviours in terms of transition temperatures, resistivities, rate-limiting nonlinear response times, nonlinear dissipation, signs of the nonlinear inductances and their dependences on temperature and resonance harmonic. We have successfully operated Nb and NbN resonators as high gain parametric amplifiers, achieving greater than 20 dB of power amplification. We have shown that for a half-wave resonator, amplification can be realised not only in the fundamental resonance but also in the higher harmonic resonances. Further, for materials with high transition temperatures, e.g. Nb and NbN, amplification can be achieved at ∼ 4 K, i.e. a temperature maintained by a pulse tube cooler. Finally, in materials systems that have very fast response times, e.g. NbN, we have found that a cross-harmonic type of amplification can be achieved by placing pump tone in a different resonant mode as the signal and the idler. This wide range of observations will have important implications on the design and application of superconducting parametric amplifiers.
Superconducting microwave resonators and Josephson elements form the basis of a broad range of quantum information technologies, including circuit quantum electrodynamics, Josephson parametric amplification, bosonic quantum computing, and engineered interactions between microwave modes. The properties of these circuits are largely determined by material parameters and design geometry, while magnetic flux often provides a means of in situ control. Electrostatic gating offers an additional degree of freedom, motivating the investigation of gate-tunable superconducting circuits, particularly through the integration of superconductors with semiconductor elements.In this thesis, we investigate the gate tunability and nonlinear response of superconducting microwave resonators incorporating indium arsenide (InAs) nanowires with epitaxial aluminum (Al) shells. We explore two distinct forms of gate control in this platform: the modification of the superconducting properties of the Al shell and the electrostatic tuning of Andreev bound states (ABSs) in Josephson weak links defined in the InAs core.We characterize the first form of gate control by measuring the gate-induced changes in resonator frequency and internal losses. We demonstrate that the observed response is well described by the Mattis--Bardeen model using an effective-temperature approach, consistent with an increase in quasiparticle population. Time-domain and modulation measurements further reveal characteristic response times down to a few tens of nanoseconds, highlighting the potential of this mechanism for applications in cryogenic switching and superconducting electronics.We then investigate the ABS--resonator interaction in both the linear and nonlinear regimes, demonstrating coupling strengths approaching the ultrastrong-coupling regime and, most notably, gate and flux control over the ABS-induced Kerr and cubic nonlinearities. In particular, we show that the Kerr contribution can be tuned through zero while maintaining a finite cubic nonlinearity, and observe three-wave-mixing parametric amplification. These findings are particularly relevant for applications requiring three-wave mixing with suppressed Kerr effects, such as Josephson parametric amplification.Together, these results demonstrate the potential of hybrid superconductor--semiconductor devices for engineering gate-tunable microwave circuits and controlling their linear and nonlinear response.
We report the design, fabrication, and characterization of parametric amplifiers based on nonlinearities arising from current-induced pair-breaking in high kinetic inductance superconducting nanowires. We call these devices microwave entangler circuits (MEC), as they are intended for use in cluster state generation. The MECs are implemented as high quality factor lumped-element LC resonators and designed to support three-wave mixing, targeting a resonance frequency of 4.5 GHz and total loss rates below 2 MHz. Fabrication involved sputtering of 14 nm NbTiN films followed by lithography and reactive ion etching to define the nanoscale circuits. Resonator properties were characterized in a rapid thermal cycle cryostat at temperatures down to 1.7 K to extract the resonant frequency, and both internal and external loss rates. Parametric amplification from three-wave mixing was demonstrated with the application of a combined DC bias and high-frequency pump. Both signal and idler gain were observed, with gain up to 18 dB. A theoretical framework was also developed to model the operation of the MECs. The models help explain the observed gain and nonlinear response. This work lays the groundwork for future cluster state generation experiments.
Superconducting microwave resonators are of interest for a wide range of applications, including for their use as microwave kinetic inductance detectors (MKIDs) for the detection of faint astrophysical signatures, as well as for quantum computing applications and materials characterization. In this paper, procedures are presented for the fabrication and characterization of thin-film superconducting microwave resonators. The fabrication methodology allows for the realization of superconducting transmission-line resonators with features on both sides of an atomically smooth single-crystal silicon dielectric. This work describes the procedure for the installation of resonator devices into a cryogenic microwave testbed and for cool-down below the superconducting transition temperature. The set-up of the cryogenic microwave testbed allows one to do careful measurements of the complex microwave transmission of these resonator devices, enabling the extraction of the properties of the superconducting lines and dielectric substrate (e.g., internal quality factors, loss and kinetic inductance fractions), which are important for device design and performance.