量子安全直接通信(quantum secure direct communication, QSDC)可通过量子信道直接传输秘密信息。受控量子安全直接通信(controlled quantum secure direct communication, CQSDC)加入了第三方对通信的控制,能够有效提高通信过程的安全性,受到广泛研究。之前的CQSDC方案大多需要多光子GHZ态纠缠源,在现有实验条件下该光源制备存在严重挑战。而且,之前的CQSDC方案需要三轮光子传输和安全性检测,对量子资源消耗较大,导致信息传输效率较低。本文提出一种基于两组贝尔基的CQSDC方案。控制方随机选择两组贝尔基制备大量双光子贝尔态纠缠对,通过量子信道分发给通信双方,通信双方先经过安全性检测确保信道无窃听,随后信息发送方编码量子态发送信息,接收方在控制方的协助下才能解码,获取信息。该方法只需要使用贝尔态进行通信,并且仅需两轮光子传输和两轮安全性检测,可以降低方案的实现复杂性,减少量子资源消耗以及多轮光子传输的损耗,在未来远距离量子通信领域具有重要的应用。
量子安全直接通信(Quantum secure direct communication,QSDC)协议是继BB84和EPR协议之后提出的关于量子通信的一个重要协议。自2000年龙桂鲁和刘晓曙提出第一个QSDC协议以来,得到了迅速发展。随后,邓富国等利用块传输思想,提出了基于EPR对的Two-Step QSDC方案。研究提出了光子的制备、光子通过偏振片前后的变化等算法,利用AS代码将量子通信过程中一些不可观察的过程可视化,并以Flash技术为载体,对基于EPR对的Two-Step QSDC方案进行了模拟仿真。模拟结果在直观展示出通信过程的基础上,证明了利用计算机对量子通信进行仿真的可行性。
摘要: 为了提高量子安全直接通信协议的安全性并同时降低其成本,该文通过对协议中检测窃听过程的分析给出了一种有效的方法,并从量子安全直接通信和量子秘密共享两种角度验证了这种方法的可行性。合法通信者使用携带有秘密消息的传输粒子检测窃听,并且不会泄露任何秘密消息。分析表明,合法通信者在不用制备单独用来检测窃听的检测粒子情况下,不仅能够让协议的量子比特理论效率达到100%,而且可以确保其无条件安全。 关键词: 量子安全直接通信 / 传输粒子 / 检测粒子 / 量子比特理论效率
In practical quantum communication, imperfect devices may introduce side channels, creating opportunities for eavesdroppers. Especially on the source side, the side channels created by active modulation may compromise the security of the protocol. We proposes a passively-sourced quantum secure direct communication (QSDC) protocol based on fully passive source. By passively modulating both the quantum state and the intensity of the decoy state, we can avoid active modulation operations at the source, thereby enhancing the robustness of QSDC against side-channel attacks. We developed a system model and conducted parameter optimization to obtain the maximum secrecy message transmission rate achievable by the protocol for each channel attenuation. At a channel attenuation of 2, 4, 6 dB (corresponding to a communication distance of 5, 10, 15 km), the secrecy message transmission rates are 5.76 * 10^-5, 9.92 * 10^-6, and 4.99 * 10^-7 bit/sec. And its maximum communication distance is about 16.875 km, which is about 94.4% of that of actively modulated QSDC.
量子保密通信包括量子密钥分发、量子安全直接通信和量子秘密共享等主要形式.在量子密钥分发和秘密共享中,传输的是随机数而不是信息,要再经过一次经典通信才能完成信息的传输.在量子信道直接传输信息的量子通信形式是量子安全直接通信.基于量子隐形传态的量子通信(简称量子隐形传态通信)是否属于量子安全直接通信尚需解释.构造了一个量子隐形传态通信方案,给出了具体的操作步骤.与一般的量子隐形传态不同,量子隐形传态通信所传输的量子态是计算基矢态,大大简化了贝尔基测量和单粒子操作.分析结果表明,量子隐形传态通信等价于包含了全用型量子密钥分发和经典通信的复合过程,不是量子安全直接通信,其传输受到中间介质和距离的影响,所以不比量子密钥分发更有优势.将该方案与量子密钥分发、量子安全直接通信和经典一次性便笺密码方案进行对比,通过几个通信参数的比较给出各个方案的特点,还特别讨论了各方案在空间量子通信方面的特点.
Current quantum secure direct communication (QSDC) protocols guarantee communication security by estimating the error rates of photons in the X and Z bases. This take the reference frame calibration between communicating parties as a necessary prerequisite. However, in mobile communications scenarios, achieving continuous and accurate reference frame calibration poses significant challenges. To address this issue, this paper proposes a reference-frame-independent (RFI) QSDC protocol. This protocol only requires ensuring the calibration accuracy of one direction of the reference frame, while allowing a misalignment angle
β in the other two directions. To improve the protocol's robustness against reference frame fluctuations, we introduce a
β-independent parameter C into the security analysis framework and rederive the protocol's security bounds. Additionally, we construct a system model and optimize the pulse intensity of the signal states, enabling the protocol to achieve optimal performance under each level of channel attenuation. At an attenuation of 10 dB (corresponding to a communication distance of 25 km), the secrecy message capacities for $β= 0^{ \circ} $ and $45^{ \circ} $ are
8.765×10−6 bit/pulse and
4.150×10−6 bit/pulse, respectively. Compared with the single-photon-based QSDC, the communication distance of the protocol proposed in this paper is significantly extended. When $β= 0^{ \circ} $ and $45^{ \circ} $, the maximum transmission distances of the RFI QSDC protocol are 27.875 km and 26.750 km, which is about 155.9 % and 149.7 % of that of the single-photon-based QSDC protocol.