Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Photonics

LED-Based Polar Coded Wireless Quantum Optical Communications for 6G and Beyond

Kushtrim Dini, Hamza Almujahed, Peter Jung

Published Jun 27, 2026• 1 citation
Publisher

Abstract

Wireless communication above 300GHz requires highly sophisticated analog circuit design due to severe frequency dependent ohmic losses. The complexity of such electronic hardware motivates exploring wireless quantum optical communication approaches even for the 6G “terahertz (THz) range” 300GHz,10THz. In this work, the classical radio frequency (RF)-based inner physical layer (PHY) transceiver blocks of channel coded wireless communication systems are replaced by wireless quantum optical transceiver blocks. Short range concepts employing LEDs as transmitters are particularly attractive, owing to their low implementation cost and practical simplicity. In contrast to laser based wireless quantum optical transmission over multipath channels, the quantum mechanical density operator ρ̲RX,[si,bi] and the transition probability γ(si,si+1) required by the quantum data detection must be revised accordingly. Furthermore, the novel interpretation introduced here, in which the extrinsic information is treated as a diversity branch rather than as an estimate of the a priori information, facilitates turbo equalization that still can accomodate varying a priori information. However, due to the limited uncoded transmission performance achievable with such systems, the incorporation of sophisticated channel coding schemes appears imperative. The authors therefore investigate the combination of sophisticated channel coding techniques, such as polar coding, with LED based wireless quantum optical transmission technologies. All numerical results assume a cryogenically cooled receiver front-end (approximately 10 K), yielding thermal noise levels. Operation at room temperature in the 6G THz range 300GHz,10THz would require an average number N¯α of thermal noise photon values of approximately 5 to 20, which is beyond the scope of this feasibility study. The results show that the proposed paradigm enables simple, robust, and practically viable wireless quantum optical communication systems with favorable transmission performance. Additional gains are achieved through iterative turbo equalization. The results also suggest that the proposed approach can pave the way toward robust and economically viable future communication solutions.

DOI
10.3390/photonics13070619

Related papers

Future Generation Wireless Quantum Optical Communications with Transmission of Thermal States

Peter Jung, Kushtrim Dini

Recent research has shown that radio applications operating above 300 GHz demand labor-intensive analog circuit design that must account for the frequency-dependent behavior of ohmic resistance at these frequencies. This challenge has motivated the investigation of optical communication solutions, well suited for the sixth generation (6 G) terahertz (THz) band spanning$300 \mathbf{G H z}$to$10 \mathbf{T H z}$, into focus. In particular, laser based wireless quantum optical communication concepts replacing radio frequency ($\mathbf{R F}$) transceivers traditionally used in channel coded wireless systems have emerged. Light emitting diodes (LEDs) to be deployed at the required quantum transmitters are easy to implement alternatives to the said lasers. However, since LEDs likely emit incoherent thermal states instead of coherent states generated by lasers, the transmission of such thermal states via wireless multipath thermal noise quantum communication channels leading to received radiation fields lacking coherence has to be investigated. It will be illustrated in this manuscript that in the case of incoherent thermal states based uncoded transmission quality suffers considerably. Thus, the authors propose the inclusion of sophisticated channel coding such as the$5 \mathrm{G} / \text{NR}$polar coding in wireless quantum optical communications employing LEDs. These results illustrate that the taken approach is capable of achieving the desired robust transmission performance.

Joint European Conference on Networks and Communications & 6G Summit (EuCNC/6G Summit)•Jun 2, 2026•0 citations

Polar Codes for 6G and Beyond Wireless Quantum Optical Communications

Peter Jung, Kushtrim Dini, Faris Abdel Rehim +1 more

Wireless communication applications above 300 GHz need careful analog electronics design that takes into account the frequency-dependent nature of ohmic resistance at these frequencies. The cumbersome development of electronics brings quantum optical communication solutions for the sixth generation (6G) THz band located between 300 GHz and 10 THz into focus. In this manuscript, the authors propose to replace the classical radio frequency based inner physical layer transceiver blocks used in classical channel coded short range wireless communication systems by wireless quantum optical communication concepts. In addition to discussing the resulting generic concept of the wireless quantum optical communications and illustrating optimum quantum data detection schemes, novel reduced state quantum data detection and novel Kohonen maps-based quantum data detection, will be addressed. All the considered quantum data detection schemes provide soft outputs required for the lowest possible block error ratio (BLER) at the output of the channel decoding. Furthermore, a novel polar codes design approach determining the polar sequence by appropriately combining already available polar sequences tailored for low BLER is presented for the first time after illustrating the basics of polar codes. In addition, turbo equalization for wireless quantum optical communications using polar codes will be presented, for the first time explicitly stating the generation of soft information associated with the codebits and introducing a novel scheme for the computation of extrinsic soft outputs to be used in the turbo equalization iterations. New simulation results emphasize the viability of the theoretical concepts.

Electronics•Sep 8, 2025•7 citations

Connecting Polar Codes and 6G Short Range Wireless Quantum Optical Communications

Kushtrim Dini, Peter Jung, Hamza Almujahed

Recent research has clarified that radio applications above 300 GHz require a laborious analog design that takes into account the frequency-dependent nature of ohmic resistance at these frequencies, bringing optical communication solutions, well suited for short range links in the sixth generation (6G) THz band located between 300 GHz and 10 THz, into focus. In particular, wireless quantum optical communication concepts are attractive, replacing the classical radio frequency based inner physical layer transceivers used in channel coded short range wireless communication systems. In particular, due to low environmental interaction of short range links, the prevailing coherence and interference ability when knowing and maintaining the carrier phase permits a beneficially robust wireless quantum optical transmission. In this manuscript, the viability of connecting the 5G/New Radio polar code and the proposed wireless quantum optical communication concept, which uses the optimum soft output quantum data detector for coherent reception with known carrier phase, is demonstrated by means of performance results.

IEEE International Mediterranean Conference on Communications and Networking (MeditCom)•Jul 7, 2025•4 citations

6G Short Range Wireless Quantum Optical Communications with Sophisticated Channel Coding

Peter Jung, Hamza Almujahed, Kushtrim Dini +1 more

Research has shown that radio applications above$300 \mathbf{G H z}$require a very careful analog design that takes into account the frequency-dependent nature of ohmic resistance at these frequencies, bringing optical communication solutions for the sixth generation$(6 \mathrm{G}) \text{THz}$band located between 300 GHz and 10 THz, being well suited for short range links, into focus. The authors propose wireless quantum optical communications concepts replacing the classical radio frequency based inner physical layer transceivers used in classical channel coded short range wireless systems. Owing to low environmental interaction of such short range links, the coherence and interference ability when knowing and maintaining the carrier phase permits a beneficially robust transmission. Also, on the basis of today's wireless communication systems considering sophisticated channel codes such as the LTE turbo code and the WLAN LDPC code seems to be of greatest interest. Thus, besides illustrating the proposed wireless quantum optical communications concept, the optimum soft output quantum data detector for coherent reception with known carrier phase is discussed and both uncoded as well as novel channel coded bit error ratio performance results are presented.

IEEE Middle East Conference on Communications and Networking (MECOM)•Nov 4, 2025•0 citations

Turbo Equalization for Thermal States Based Wireless Quantum Optical Multipath Communications Using Polar Codes

Peter Jung, Kushtrim Dini

Light emitting diodes (LEDs), which likely emit thermal states, are easy to implement alternatives to the usually taken lasers when deployed at quantum transmitters of wireless quantum optical communications. However, using LEDs leads to increased bit error and block error ratios in the said wireless quantum optical communication concepts. These increases of the error ratios can be mitigated by applying sophisticated channel coding, e.g. polar coding, which has been included in the Fifth Generation New Radio (5 G/NR) standard. In addition, applying turbo equalization, proposed for classical communications in the 1990s, seems attractive when striving for improved robustness of wireless quantum optical communications. In this manuscript the recently emerged laser based polar coded wireless quantum optical communication concept with turbo equalization, which has been applied to multipath reception scenarios, will be extended to the case of LED based polar coded wireless quantum optical multipath communications. We will demonstrate the viability of the proposed concept with selected simulation results.

International Conference on Quantum Communications, Networking, and Computing (QCNC)•Apr 6, 2026•2 citations

Soft Output M ‐Algorithm Based Quantum Data Detection for Polar Coded Wireless Quantum Optical Multipath Communications

Kushtrim Dini, Peter Jung

ABSTRACT Entanglement‐based quantum communication schemes, such as quantum teleportation, rely on classical communication links, which introduce significant transmission overhead and limit the achievable quantum advantage. To address this issue, this work investigates a non–entanglement‐based quantum communication concept. The proposed laser‐based physical layer (PHY) model accommodates a multipath quantum channel and receiver impairments, including intersymbol interference (ISI) caused by multipath propagation, thermal background noise, decoherence, the absence of phase coherence between transmitter and receiver, photon‐counting reception, dark counts and quantum efficiency. Because optimum full state sequence detection becomes increasingly complex with increasing channel memory, a reduced‐complexity trellis‐based, suboptimum yet practical sequence detection approach considering the ‐algorithm is applied. By extending this algorithm to generate soft outputs, a soft‐output ‐algorithm (SOMA) is obtained, enabling improved channel decoding. Two SOMA variants are introduced: a straightforward ‘post‐processing (PP)’‐SOMA and a more advanced ‘simple rule (SR)’‐SOMA. Results indicate that, particularly with SR‐SOMA, the proposed concept substantially reduces transmission overhead while ensuring reliable reception performance. Furthermore, the integration of classical channel coding, such as 3GPP 5G/new radio (5G/NR) polar codes, enhances overall system robustness. The proposed architecture can operate as a stand‐alone communication system without entanglement and may additionally convey the classical feed‐forward information required by entanglement‐based protocols.

IET Quantum Communication•Jan 1, 2026•0 citations
Wireless communication above 300GHz requires highly sophisticated analog circuit design due to severe frequency dependent ohmic losses. The complexity of such electronic hardware motivates exploring wireless quantum optical communication approaches even for the 6G “terahertz (THz) range” 300GHz,10THz. In this work, the classical radio frequency (RF)-based inner physical layer (PHY) transceiver blocks of channel coded wireless communication systems are replaced by wireless quantum optical transceiver blocks. Short range concepts employing LEDs as transmitters are particularly attractive, owing to their low implementation cost and practical simplicity. In contrast to laser based wireless quantum optical transmission over multipath channels, the quantum mechanical density operator ρ̲RX,[si,bi] and the transition probability γ(si,si+1) required by the quantum data detection must be revised accordingly. Furthermore, the novel interpretation introduced here, in which the extrinsic information is treated as a diversity branch rather than as an estimate of the a priori information, facilitates turbo equalization that still can accomodate varying a priori information. However, due to the limited uncoded transmission performance achievable with such systems, the incorporation of sophisticated channel coding schemes appears imperative. The authors therefore investigate the combination of sophisticated channel coding techniques, such as polar coding, with LED based wireless quantum optical transmission technologies. All numerical results assume a cryogenically cooled receiver front-end (approximately 10 K), yielding thermal noise levels. Operation at room temperature in the 6G THz range 300GHz,10THz would require an average number N¯α of thermal noise photon values of approximately 5 to 20, which is beyond the scope of this feasibility study. The results show that the proposed paradigm enables simple, robust, and practically viable wireless quantum optical communication systems with favorable transmission performance. Additional gains are achieved through iterative turbo equalization. The results also suggest that the proposed approach can pave the way toward robust and economically viable future communication solutions.
Recent research has shown that radio applications operating above 300 GHz demand labor-intensive analog circuit design that must account for the frequency-dependent behavior of ohmic resistance at these frequencies. This challenge has motivated the investigation of optical communication solutions, well suited for the sixth generation (6 G) terahertz (THz) band spanning300GHz300 \mathbf{G H z}300GHzto10THz10 \mathbf{T H z}10THz, into focus. In particular, laser based wireless quantum optical communication concepts replacing radio frequency (RF\mathbf{R F}RF) transceivers traditionally used in channel coded wireless systems have emerged. Light emitting diodes (LEDs) to be deployed at the required quantum transmitters are easy to implement alternatives to the said lasers. However, since LEDs likely emit incoherent thermal states instead of coherent states generated by lasers, the transmission of such thermal states via wireless multipath thermal noise quantum communication channels leading to received radiation fields lacking coherence has to be investigated. It will be illustrated in this manuscript that in the case of incoherent thermal states based uncoded transmission quality suffers considerably. Thus, the authors propose the inclusion of sophisticated channel coding such as the5G/NR5 \mathrm{G} / \text{NR}5G/NRpolar coding in wireless quantum optical communications employing LEDs. These results illustrate that the taken approach is capable of achieving the desired robust transmission performance.
Wireless communication applications above 300 GHz need careful analog electronics design that takes into account the frequency-dependent nature of ohmic resistance at these frequencies. The cumbersome development of electronics brings quantum optical communication solutions for the sixth generation (6G) THz band located between 300 GHz and 10 THz into focus. In this manuscript, the authors propose to replace the classical radio frequency based inner physical layer transceiver blocks used in classical channel coded short range wireless communication systems by wireless quantum optical communication concepts. In addition to discussing the resulting generic concept of the wireless quantum optical communications and illustrating optimum quantum data detection schemes, novel reduced state quantum data detection and novel Kohonen maps-based quantum data detection, will be addressed. All the considered quantum data detection schemes provide soft outputs required for the lowest possible block error ratio (BLER) at the output of the channel decoding. Furthermore, a novel polar codes design approach determining the polar sequence by appropriately combining already available polar sequences tailored for low BLER is presented for the first time after illustrating the basics of polar codes. In addition, turbo equalization for wireless quantum optical communications using polar codes will be presented, for the first time explicitly stating the generation of soft information associated with the codebits and introducing a novel scheme for the computation of extrinsic soft outputs to be used in the turbo equalization iterations. New simulation results emphasize the viability of the theoretical concepts.
Recent research has clarified that radio applications above 300 GHz require a laborious analog design that takes into account the frequency-dependent nature of ohmic resistance at these frequencies, bringing optical communication solutions, well suited for short range links in the sixth generation (6G) THz band located between 300 GHz and 10 THz, into focus. In particular, wireless quantum optical communication concepts are attractive, replacing the classical radio frequency based inner physical layer transceivers used in channel coded short range wireless communication systems. In particular, due to low environmental interaction of short range links, the prevailing coherence and interference ability when knowing and maintaining the carrier phase permits a beneficially robust wireless quantum optical transmission. In this manuscript, the viability of connecting the 5G/New Radio polar code and the proposed wireless quantum optical communication concept, which uses the optimum soft output quantum data detector for coherent reception with known carrier phase, is demonstrated by means of performance results.
Research has shown that radio applications above300GHz300 \mathbf{G H z}300GHzrequire a very careful analog design that takes into account the frequency-dependent nature of ohmic resistance at these frequencies, bringing optical communication solutions for the sixth generation(6G)THz(6 \mathrm{G}) \text{THz}(6G)THzband located between 300 GHz and 10 THz, being well suited for short range links, into focus. The authors propose wireless quantum optical communications concepts replacing the classical radio frequency based inner physical layer transceivers used in classical channel coded short range wireless systems. Owing to low environmental interaction of such short range links, the coherence and interference ability when knowing and maintaining the carrier phase permits a beneficially robust transmission. Also, on the basis of today's wireless communication systems considering sophisticated channel codes such as the LTE turbo code and the WLAN LDPC code seems to be of greatest interest. Thus, besides illustrating the proposed wireless quantum optical communications concept, the optimum soft output quantum data detector for coherent reception with known carrier phase is discussed and both uncoded as well as novel channel coded bit error ratio performance results are presented.
Light emitting diodes (LEDs), which likely emit thermal states, are easy to implement alternatives to the usually taken lasers when deployed at quantum transmitters of wireless quantum optical communications. However, using LEDs leads to increased bit error and block error ratios in the said wireless quantum optical communication concepts. These increases of the error ratios can be mitigated by applying sophisticated channel coding, e.g. polar coding, which has been included in the Fifth Generation New Radio (5 G/NR) standard. In addition, applying turbo equalization, proposed for classical communications in the 1990s, seems attractive when striving for improved robustness of wireless quantum optical communications. In this manuscript the recently emerged laser based polar coded wireless quantum optical communication concept with turbo equalization, which has been applied to multipath reception scenarios, will be extended to the case of LED based polar coded wireless quantum optical multipath communications. We will demonstrate the viability of the proposed concept with selected simulation results.
ABSTRACT Entanglement‐based quantum communication schemes, such as quantum teleportation, rely on classical communication links, which introduce significant transmission overhead and limit the achievable quantum advantage. To address this issue, this work investigates a non–entanglement‐based quantum communication concept. The proposed laser‐based physical layer (PHY) model accommodates a multipath quantum channel and receiver impairments, including intersymbol interference (ISI) caused by multipath propagation, thermal background noise, decoherence, the absence of phase coherence between transmitter and receiver, photon‐counting reception, dark counts and quantum efficiency. Because optimum full state sequence detection becomes increasingly complex with increasing channel memory, a reduced‐complexity trellis‐based, suboptimum yet practical sequence detection approach considering the ‐algorithm is applied. By extending this algorithm to generate soft outputs, a soft‐output ‐algorithm (SOMA) is obtained, enabling improved channel decoding. Two SOMA variants are introduced: a straightforward ‘post‐processing (PP)’‐SOMA and a more advanced ‘simple rule (SR)’‐SOMA. Results indicate that, particularly with SR‐SOMA, the proposed concept substantially reduces transmission overhead while ensuring reliable reception performance. Furthermore, the integration of classical channel coding, such as 3GPP 5G/new radio (5G/NR) polar codes, enhances overall system robustness. The proposed architecture can operate as a stand‐alone communication system without entanglement and may additionally convey the classical feed‐forward information required by entanglement‐based protocols.