Low-Density Parity-Check (LDPC) codes constitute the baseline forward-error-correction solution in 5G New Radio (NR) because of their excellent error-correction performance, which is essential for ensuring robust connectivity in non-terrestrial network (NTN) environments. Despite their advantages, traditional LDPC decoding algorithms often involve high computational complexity, creating significant constraints for terminals with limited energy and processing capabilities. To overcome these limitations, this work introduces a new deep learning (DL)-enhanced LDPC decoding approach tailored for unmanned aerial vehicle (UAV) communication systems. In particular, we combine DL models, including recurrent neural networks (RNN), and long short-term memory (LSTM), and transformer (TF) model to support LDPC decoding. The proposed design performs DL-based inference prior to executing a reduced number of LDPC decoding iterations, thereby decreasing the computational burden relative to conventional decoding schemes. Simulation results under representative NTN conditions show that the RNN-assisted LDPC decoder surpasses full-iteration belief propagation and Offset Min-Sum decoding in terms of block error rate and throughput performance.
Low-Density Parity-Check (LDPC) codes constitute the baseline forward-error-correction solution in 5G New Radio (NR) because of their excellent error-correction performance, which is essential for ensuring robust connectivity in non-terrestrial network (NTN) environments. Despite their advantages, traditional LDPC decoding algorithms often involve high computational complexity, creating significant constraints for terminals with limited energy and processing capabilities. To overcome these limitations, this work introduces a new deep learning (DL)-enhanced LDPC decoding approach tailored for unmanned aerial vehicle (UAV) communication systems. In particular, we combine DL models, including recurrent neural networks (RNN), and long short-term memory (LSTM), and transformer (TF) model to support LDPC decoding. The proposed design performs DL-based inference prior to executing a reduced number of LDPC decoding iterations, thereby decreasing the computational burden relative to conventional decoding schemes. Simulation results under representative NTN conditions show that the RNN-assisted LDPC decoder surpasses full-iteration belief propagation and Offset Min-Sum decoding in terms of block error rate and throughput performance.
In this letter, we propose various low-complexity neural layered min-sum (NLMS) algorithms to improve the decoding performance of the fifth generation (5G) new radio (NR) low-density parity-check (LDPC) codes. Our proposals are based on the computationally-efficient normalized offset min-sum (NOMS) approach for the layered belief propagation (LBP). The main novelty of our proposals is a deep neural network (DNN) that implements the layered mode decoding and that additionally learns the normalization and the offset parameters of the NOMS scheme. The schemes that we propose use the DNN as well as adaptation and filtering for estimating the optimum values of these parameters. We show by simulation that our proposed decoders achieve a significant computational benefit compared to the standard (non-neural) LBP decoder without an appreciable performance penalty.
With the deployment of 5G networks, the Internet of Things (IoT) has experienced a transformative boost, enabling higher data rates, reduced latency, and the connection of millions of devices across applications like smart cities, healthcare, and industrial automation. However, in real-world scenarios, the performance of Low-Density Parity-Check (LDPC) codes, the preferred channel coding scheme in 5G, is severely affected by noise and fading environments, particularly colored noise, which distorts signals over certain frequency bands. Colored noise introduces correlation in the interference, unlike white noise, thereby posing a challenge in decoding, especially in fading channels such as Rayleigh, Rician, and Nakagami-m. In this work, we propose a novel approach that combines the Iterative Offset Min-Sum (OMS) algorithm with a Convolutional Neural Network (CNN) to enhance LDPC decoding efficiency in 5G-enabled IoT networks. Our proposed OMS-CNN hybrid architecture addresses the limitations imposed by colored noise in fading channels by employing deep learning techniques for accurate noise estimation and mitigation. Furthermore, the OMS algorithm mitigates the overestimation of noise correction, refining the output in iterative decoding steps. Through comprehensive simulations, the OMS-CNN decoder demonstrates substantial improvements over traditional decoding approaches. Specifically, it achieves a performance enhancement of 2.7 dB at a bit error rate (BER) of [Formula: see text] across a range of fading channels. The study examines the decoder's performance in environments characterized by Rayleigh, Rician, and Nakagami-m fading models, highlighting the robustness of the proposed solution under different channel conditions. Additionally, this research explores the influence of parameters such as the correlation coefficient of the noise, the scaling factor in the cost function, and the number of iterations between the CNN and OMS decoding steps.
Today's modern wireless communication systems demand extensive quality and computational power with an increase in day-to-day data-rate standards. The latest com-munication standards focus on low latency, high throughput, and reliable error correction capabilities which inspired us to explore the 5G New Generation (NR) technology. Low-Density Parity-Check Codes (LDPC) are known to have error correction capabilities that can achieve Shannon's maximum channel ca-pacity. Encoding of LDPC Codes features a sparse property that enables effortless decoding at the receiver end. Advancements in deep learning have helped in estimating the channel noise more accurately. The Iterative Belief Propagation-Convolutional Neural Network (BP-CNN) architecture involves a CNN block which is trained with a quadratic loss function concatenated to a standard BP Decoder. The proposed Iterative BP-CNN architecture with a Batch Normalization layer results in a better performance compared to the Iterative BP-CNN architecture as it standardizes the input to the CNN block and also solves the problem of vanishing gradients during backpropagation.
In this letter, a neural self-corrected min-sum (NSCMS) decoder is proposed for 5G new radio (NR) low-density parity-check (LDPC) codes. Training in real-time on a rapidly changing channel requires low latency and minimal resource utilization. Unfortunately, typical neural decoders for LDPC codes use large and deep neural networks proportional to the code length, leading to latency and resource problems. In the network of NSCMS similar to network model pruning, certain nodes meeting the self correction condition are deleted and excluded from learning. This reduces the computational complexity of learning, compared to conventional networks. Thus, the NSCMS decoder has high practicality in real-time training using machine learning. Furthermore, self-correction allows for more reliable message-based learning and significantly improves performance. Simulation results demonstrate that NSCMS decoders exhibit lower error rates than previously proposed min-sum decoders.
This thesis investigates the optimization of Low-Density Parity-Check (LDPC) decoding through machine learning techniques, with a specific focus on 5G communication systems. Traditional LDPC decoding algorithms face a critical trade-off: Belief Propagation (BP) offers excellent error-correction performance but with high computational complexity, while Min-Sum (MS) reduces complexity at the cost of degraded performance. To address this limitation, a hybrid neural network architecture is proposed that incorporates learnable normalization and offset weights into the message-passing framework of LDPC decoders. This approach integrates multiplicative (normalization) and additive (offset) weights into the Tanner graph structure, allowing the decoder to adapt to specific channel conditions. A novel weighted binary cross-entropy loss function is developed that prioritizes entire block recovery by assigning different importance to information and parity bits during training. Experimental results demonstrate that ML-assisted decoder consistently outperforms conventional Min-Sum decoding, approaching the error-correction capability of Belief Propagation while maintaining comparable computational efficiency to Min-Sum. Comprehensive evaluations across different weight configurations (scalar and vector-based) reveal that increased parametrization generally improves decoding performance. Analysis of the impact of iteration counts shows that the optimal number of decoding iterations varies between different code configurations with studied Basegraph 1 case requiring 15 iterations for optimal performance while studied Basegraph 2 case benefits significantly from 20 iterations. The proposed ML-assisted LDPC decoder represents a significant advancement for 5G systems, offering improved error correction at lower signal strengths while balancing latency and computational requirements. This research contributes to the ongoing evolution of wireless technology by demonstrating how machine learning can effectively enhance traditional decoding algorithms, providing a practical pathway toward more efficient and adaptive error correction in modern communication systems.
For recent years, deep learning has been studied and utilized among decoders in wireless and optical communication. For low density parity check (LDPC) codes, most works use neural network (NN) to implement the belief propagation (BP) decoder and unfold its iterations into layers activated by different functions. However, the whole decoder composed by neural network performs lots of non-linear operations, which are time consuming and unfriendly to hardware implementation. In this work, a neural network-aided normalized min-sum (NN-aided NMS) decoder for LDPC code is proposed, in which the normalization factors are inferred from input log likelihood ratio (LLR) by apre-trained NN, while maintaining check and variable nodes processing the same as in min-sum (MS) decoder. In order to test the proposed decoder with irregular LDPC code, a rate-7/8 one was constructed using progressive edge growth (PEG) algorithm, showing better error correction capability than the standard of consultative committee for space data systems (CCSDS) LDPC (8176,7154) code by 0.08 dB with the same rate. Simulation results show that, NN-aided NMS decoder outperforms MS decoder by 0.3 dB, and its performance approaches BP decoder with a gap of 0.02 dB, which is 50% closer than the best NMS decoder using 0.7 as the normalization factor. The proposed decoder has good performance for both regular and irregular LDPC codes, and needs much less computation complexity than BP decoder. It introduces more linear computation than NMS decoder but achieves better bit error rate (BER) performance, thus becoming a good complement between BP and NMS decoder when trading off among complexity, error correction performance and hardware implementation for wireless and satellite communication.