Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Electron Device Letters

Double-Sided Funnel-Shaped Through Silicon Via Interposer by Wet-Etching Method for Superconducting Quantum Application

J. Y. Yu, Yongbo Wu, Qian Wang, Changming Song, Kaixiang Mao, Jian Cai

Published Jun 26, 2026• 0 citations
Publisher

Abstract

In this work, a wet-etching method utilizing the different etch rates on various silicon crystal planes is adopted to fabricate fully superconducting partially-filled double-sided funnel-shaped niobium through silicon via (TSV) with highly smooth sidewall. To evaluate the fabrication quality of TSVs, scanning electron microscopy (SEM), focused ion beam (FIB), and energy dispersive spectroscopy (EDS) are employed to examine the conformality of sputtered Nb and photoresist (PR) on TSV sidewalls for different openings. Daisy chain test vehicle (TV) containing 288 TSVs with 200, 300, and$400\mu $m opening all exhibit highly consistent transition temperature (Tc). Wide-range thermal cycling (TC) under 300-1.68-300K has been performed for 22 times without obvious degradation of superconducting transition property. Moerover, the critical current (Ic) measured using the Gifford-McMahon cryocooler is 354 mA. Based on this structure, the comprehensive simulations are further investigated including novel 3D lumped resonator design with interdigitated capacitor (IDC) and meander inductor, electrical response varied with different opening values, and mechanical stress distribution after TC, providing a useful reference for future 3D quantum processor design.

DOI
10.1109/led.2026.3703907

Related papers

Through-silicon-via Architecture of 3D Integration for Superconducting Quantum Computing Application

J. Y. Yu, Qian Wang, Yao Rui Zheng +6 more

As one of the mainstream technique routes to implement universal quantum computing, superconducting qubit has been highly anticipated in recent years. However, the current widely-using 2D interconnect forms are not capable to meet the interconnect demand of high integration quantum processor in practical use due to wiring congestion, electromagnetic crosstalk, mechanical stress concentration, limited interior space of dilution refrigerator, etc. Therefore, quantum packaging will also need to be updated from 2D planar to 3D vertical architecture for higher integration density of superconducting qubits. In view of the current chiplet development trends in IC industry, we propose a 3D integration architecture based on the partition strategy of qubit chiplet and bus chiplet for superconducting quantum computing. This chiplet solution respectively utilizes the TSV and microbump structure in superconducting constituent material scheme to achieve low-loss intra-layer and inter-layer connection, which provides a possible technical route for modular large-scale quantum processor. To verify the feasibility of the above architecture, we design a kind of TiN-based TSV test vehicle including daisy chain structure to inspect the stabilization of DC resistance and transmission line structure for evaluation of DC/microwave signal transporting performance during the cool-down process. The TSVs in this test vehicle possess high aspect ratio (10:1,$30 \mu\mathrm{m}$diameter) fabricated by DRIE, coating with ∼200nm TiN layer by ALD. Subsequently, Al/TiN planar wiring layer is patterned by secondary lithography and ICP process. Then morphology observation, R.T./cryogenic electrical tests are successively carried out to evaluate the performance of TSV test vehicle. SEM along with EDS reveal that the TiN coating is conformal and defect-free with nearly vertical sidewall profile. Electrical tests show that TSV structures possess satisfactory linear ohmic characteristics and a wide range of process uniformity and repeatability at R.T. Additionally, the DC resistance and S21loss amplitude both exhibit abrupt drop during the cooling process, indicating that certain degree of superconducting transition has probably occurred. Therefore, the TiN-based TSV interposer elaborated in this paper combined with indium-based flip-chip TCB methods provides the possibility to implement 3D quantum integration architecture based on chiplet design.

IEEE Electronic Components and Technology Conference (ECTC)•May 1, 2023•9 citations

Through silicon vias for the 3D integration of superconducting quantum circuits

Nicholas P.H. Nugent

The development of superconducting quantum computing has seen a rapid acceleration in recent years. The number of controllable qubits fabricated on-chip has steadily increased in the pursuit of more computational power. 3D integration has become a key enabling technology for the scalability of these larger systems due to the architectural flexibility it offers, mirroring its impact on conventional electronics. As part of this development, superconducting throughsilicon vias (TSVs) have recently emerged as a method of breaking the wiring plane and routing signals through the substrate as well as for other, more novel, applications such as acting as the capacitive component of a new type of superconducting qubit. This thesis will discuss the simulation, fabrication and measurement of superconducting TSVs. Using ANSYS HFSS electromagnetic simulation software, the geometric parameters of TSV-integrated co-planar waveguides were optimised for the transmission of microwave signals. In addition, a TSV-integrated tunable qubit coupler was simulated and the effect of the device’s geometry on the various capacitances within the device, and in turn on the device’s parameters, such as the charging and Josephson energies, was investigated. As a leading cause of signal degradation in electronic devices, crosstalk should be removed from devices as far as possible. Varying the number and arrangement of grounding TSVs was explored as a strategy for the mitigation of crosstalk between adjacent TSVs and it was found that using 4 ground TSVs to shield the signal TSV resulted in a dramatic reduction in crosstalk, with values of S41 <−140dB at 4GHz. For the fabricated samples, a comparison was made of different Bosch etches used to define the TSVs and it was determined that the ICP power and total etch time were highly influential in the degree of sidewall roughness. Methods of sidewall smoothing were also investigated, with KOH wet etching found to offer near atomic-level smoothness. Finally, the fabricated samples were characterised using, among other methods, cryogenic spectroscopy. A novel application of the method of calibrated cryogenic S-parameter measurement to superconducting TSVs is also presented, with the TSV-integrated co-planar waveguide structure under test exhibiting a peak transmission of -1.44dB.

•Jan 1, 2025•0 citations

Fabrication of superconducting through-silicon vias with photoresist passivation technique

Xiaoyu Xia, Yuting Sun, Qingyu Wang +5 more

Superconducting through-silicon vias (TSVs), which enable direct signal transmission between circuit layers and reduce spurious coupling, are essential elements in accomplishing a large-scale quantum circuit. However, the widespread adoption of superconducting TSVs has been hindered by fabrication challenges, such as sidewall roughness and complicated process flow. Here, we propose a technique to fabricate superconducting TSVs. With this technique, a single layer of passivated photoresist (PPR) is treated as a hard mask during the Bosch etching process in order to reach an aspect ratio of 20:1 in a 500μm-thick silicon wafer. Compared with other TSV fabrication techniques, using PPR as a hard mask achieves high etching selectivity (80:1), simplifies fabrication process, and yields smooth sidewalls, while remaining compatible with superconducting quantum circuits. To verify superconducting performance, we performed cryogenic measurements on large-diameter TSVs (500μm) that allow uniform aluminum deposition, yielding a critical temperature (TC) of 1.2 K. This technique supports the development of 3D-integrated architectures for superconducting quantum processors, offering a practical pathway toward high-density circuit architectures.

Journal of Applied Physics•Jan 15, 2026•0 citations

Superconducting High-Aspect Ratio Through-Silicon Vias with DC-Sputtered Al for Quantum 3D integration

J. A. Alfaro-Barrantes, Massimo Mastrangeli, David Johannes Thoen +4 more

This paper presents the fabrication and electrical characterization of superconducting high-aspect ratio through-silicon vias DC-sputtered with aluminum. Fully conformal and void-free coating of 300 μm-deep and 50 μm-wide vias with Al, a CMOS-compatible and widely available superconductor, was made possible by tailoring a funneled sidewall profile for the axisymmetric vias. Single-via electric resistance as low as 80.44 mQ at room temperature and superconductivity below 1.28 K were measured by a cross-bridge Kelvin resistor structure. This work thus demonstrates the fabrication of functional superconducting interposer layers, suitable for high-density 3D integration of silicon-based quantum computing architectures.

IEEE Electron Device Letters•Jan 1, 2020•24 citations

Fabrication of superconducting through-silicon vias

Justin Mallek, D. Yost, Danna Rosenberg +15 more

Increasing circuit complexity within quantum systems based on superconducting qubits necessitates high connectivity while retaining qubit coherence. Classical micro-electronic systems have addressed interconnect density challenges by using 3D integration with interposers containing through-silicon vias (TSVs), but extending these integration techniques to superconducting quantum systems is challenging. Here, we discuss our approach for realizing high-aspect-ratio superconducting TSVs\textemdash 10 $μ$m wide by 20 $μ$m long by 200 $μ$m deep\textemdash with densities of 100 electrically isolated TSVs per square millimeter. We characterize the DC and microwave performance of superconducting TSVs at cryogenic temperatures and demonstrate superconducting critical currents greater than 20 mA. These high-aspect-ratio, high critical current superconducting TSVs will enable high-density vertical signal routing within superconducting quantum processors.

arXiv:2103.08536•Mar 15, 2021•43 citations

Design, Structural Characterization, and Superconducting Behavior of Niobium Thin-Film Microstructures for Ion-Trap Quantum Computers: Toward J–B–T Critical Surface Mapping for Cryogenic 3D SiP Integration

Awais Qadir, Uwe Zschenderlein, Nathanael Jöhrmann +9 more

Superconducting thin-film microstructures are promising for generating local magnetic-field gradients for individual ion addressing in trapped-ion quantum processors while minimizing Joule heating at cryogenic temperatures. In this work, sputtered niobium (Nb) thin films on Si were patterned into coil and meander structures as candidate components for cryogenic 3D microsystem integration. The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, and electrical resistance at cryogenic temperature. XRD confirms textured bcc Nb with a dominant Nb (110) reflection and an apparent out-of-plane coherence length of ~20 nm. SEM reveals a porous, needle-like nanograin morphology, while Raman spectroscopy indicates a disordered mixed niobium-oxide surface layer. Electrical measurements show clear superconducting transitions, with midpoint critical temperatures of about 7.5 K for the coil and 7.8 K for the meander, both below bulk Nb. The normal-state behavior is characterized by low residual-resistivity ratios (RRR), indicating significant disorder and grain-boundary scattering. Based on the measured Tc values and geometry-derived effective current densities (Jc), a phenomenological J-B-T critical-surface model was constructed to estimate the superconducting operating window under simultaneous temperature and magnetic-field loading. The results establish a process-structure-property correlation for sputtered Nb on Si and provide guidance for integrating superconducting thin-film coils into future trapped-ion cryogenic microsystems.

International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)•Apr 19, 2026•0 citations
In this work, a wet-etching method utilizing the different etch rates on various silicon crystal planes is adopted to fabricate fully superconducting partially-filled double-sided funnel-shaped niobium through silicon via (TSV) with highly smooth sidewall. To evaluate the fabrication quality of TSVs, scanning electron microscopy (SEM), focused ion beam (FIB), and energy dispersive spectroscopy (EDS) are employed to examine the conformality of sputtered Nb and photoresist (PR) on TSV sidewalls for different openings. Daisy chain test vehicle (TV) containing 288 TSVs with 200, 300, and400μ400\mu 400μm opening all exhibit highly consistent transition temperature (Tc). Wide-range thermal cycling (TC) under 300-1.68-300K has been performed for 22 times without obvious degradation of superconducting transition property. Moerover, the critical current (Ic) measured using the Gifford-McMahon cryocooler is 354 mA. Based on this structure, the comprehensive simulations are further investigated including novel 3D lumped resonator design with interdigitated capacitor (IDC) and meander inductor, electrical response varied with different opening values, and mechanical stress distribution after TC, providing a useful reference for future 3D quantum processor design.
As one of the mainstream technique routes to implement universal quantum computing, superconducting qubit has been highly anticipated in recent years. However, the current widely-using 2D interconnect forms are not capable to meet the interconnect demand of high integration quantum processor in practical use due to wiring congestion, electromagnetic crosstalk, mechanical stress concentration, limited interior space of dilution refrigerator, etc. Therefore, quantum packaging will also need to be updated from 2D planar to 3D vertical architecture for higher integration density of superconducting qubits. In view of the current chiplet development trends in IC industry, we propose a 3D integration architecture based on the partition strategy of qubit chiplet and bus chiplet for superconducting quantum computing. This chiplet solution respectively utilizes the TSV and microbump structure in superconducting constituent material scheme to achieve low-loss intra-layer and inter-layer connection, which provides a possible technical route for modular large-scale quantum processor. To verify the feasibility of the above architecture, we design a kind of TiN-based TSV test vehicle including daisy chain structure to inspect the stabilization of DC resistance and transmission line structure for evaluation of DC/microwave signal transporting performance during the cool-down process. The TSVs in this test vehicle possess high aspect ratio (10:1,30μm30 \mu\mathrm{m}30μmdiameter) fabricated by DRIE, coating with ∼200nm TiN layer by ALD. Subsequently, Al/TiN planar wiring layer is patterned by secondary lithography and ICP process. Then morphology observation, R.T./cryogenic electrical tests are successively carried out to evaluate the performance of TSV test vehicle. SEM along with EDS reveal that the TiN coating is conformal and defect-free with nearly vertical sidewall profile. Electrical tests show that TSV structures possess satisfactory linear ohmic characteristics and a wide range of process uniformity and repeatability at R.T. Additionally, the DC resistance and S21loss amplitude both exhibit abrupt drop during the cooling process, indicating that certain degree of superconducting transition has probably occurred. Therefore, the TiN-based TSV interposer elaborated in this paper combined with indium-based flip-chip TCB methods provides the possibility to implement 3D quantum integration architecture based on chiplet design.
The development of superconducting quantum computing has seen a rapid acceleration in recent years. The number of controllable qubits fabricated on-chip has steadily increased in the pursuit of more computational power. 3D integration has become a key enabling technology for the scalability of these larger systems due to the architectural flexibility it offers, mirroring its impact on conventional electronics. As part of this development, superconducting throughsilicon vias (TSVs) have recently emerged as a method of breaking the wiring plane and routing signals through the substrate as well as for other, more novel, applications such as acting as the capacitive component of a new type of superconducting qubit. This thesis will discuss the simulation, fabrication and measurement of superconducting TSVs. Using ANSYS HFSS electromagnetic simulation software, the geometric parameters of TSV-integrated co-planar waveguides were optimised for the transmission of microwave signals. In addition, a TSV-integrated tunable qubit coupler was simulated and the effect of the device’s geometry on the various capacitances within the device, and in turn on the device’s parameters, such as the charging and Josephson energies, was investigated. As a leading cause of signal degradation in electronic devices, crosstalk should be removed from devices as far as possible. Varying the number and arrangement of grounding TSVs was explored as a strategy for the mitigation of crosstalk between adjacent TSVs and it was found that using 4 ground TSVs to shield the signal TSV resulted in a dramatic reduction in crosstalk, with values of S41 <−140dB at 4GHz. For the fabricated samples, a comparison was made of different Bosch etches used to define the TSVs and it was determined that the ICP power and total etch time were highly influential in the degree of sidewall roughness. Methods of sidewall smoothing were also investigated, with KOH wet etching found to offer near atomic-level smoothness. Finally, the fabricated samples were characterised using, among other methods, cryogenic spectroscopy. A novel application of the method of calibrated cryogenic S-parameter measurement to superconducting TSVs is also presented, with the TSV-integrated co-planar waveguide structure under test exhibiting a peak transmission of -1.44dB.
Superconducting through-silicon vias (TSVs), which enable direct signal transmission between circuit layers and reduce spurious coupling, are essential elements in accomplishing a large-scale quantum circuit. However, the widespread adoption of superconducting TSVs has been hindered by fabrication challenges, such as sidewall roughness and complicated process flow. Here, we propose a technique to fabricate superconducting TSVs. With this technique, a single layer of passivated photoresist (PPR) is treated as a hard mask during the Bosch etching process in order to reach an aspect ratio of 20:1 in a 500μm-thick silicon wafer. Compared with other TSV fabrication techniques, using PPR as a hard mask achieves high etching selectivity (80:1), simplifies fabrication process, and yields smooth sidewalls, while remaining compatible with superconducting quantum circuits. To verify superconducting performance, we performed cryogenic measurements on large-diameter TSVs (500μm) that allow uniform aluminum deposition, yielding a critical temperature (TC) of 1.2 K. This technique supports the development of 3D-integrated architectures for superconducting quantum processors, offering a practical pathway toward high-density circuit architectures.
This paper presents the fabrication and electrical characterization of superconducting high-aspect ratio through-silicon vias DC-sputtered with aluminum. Fully conformal and void-free coating of 300 μm-deep and 50 μm-wide vias with Al, a CMOS-compatible and widely available superconductor, was made possible by tailoring a funneled sidewall profile for the axisymmetric vias. Single-via electric resistance as low as 80.44 mQ at room temperature and superconductivity below 1.28 K were measured by a cross-bridge Kelvin resistor structure. This work thus demonstrates the fabrication of functional superconducting interposer layers, suitable for high-density 3D integration of silicon-based quantum computing architectures.
Increasing circuit complexity within quantum systems based on superconducting qubits necessitates high connectivity while retaining qubit coherence. Classical micro-electronic systems have addressed interconnect density challenges by using 3D integration with interposers containing through-silicon vias (TSVs), but extending these integration techniques to superconducting quantum systems is challenging. Here, we discuss our approach for realizing high-aspect-ratio superconducting TSVs\textemdash 10 μμμm wide by 20 μμμm long by 200 μμμm deep\textemdash with densities of 100 electrically isolated TSVs per square millimeter. We characterize the DC and microwave performance of superconducting TSVs at cryogenic temperatures and demonstrate superconducting critical currents greater than 20 mA. These high-aspect-ratio, high critical current superconducting TSVs will enable high-density vertical signal routing within superconducting quantum processors.
Superconducting thin-film microstructures are promising for generating local magnetic-field gradients for individual ion addressing in trapped-ion quantum processors while minimizing Joule heating at cryogenic temperatures. In this work, sputtered niobium (Nb) thin films on Si were patterned into coil and meander structures as candidate components for cryogenic 3D microsystem integration. The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, and electrical resistance at cryogenic temperature. XRD confirms textured bcc Nb with a dominant Nb (110) reflection and an apparent out-of-plane coherence length of ~20 nm. SEM reveals a porous, needle-like nanograin morphology, while Raman spectroscopy indicates a disordered mixed niobium-oxide surface layer. Electrical measurements show clear superconducting transitions, with midpoint critical temperatures of about 7.5 K for the coil and 7.8 K for the meander, both below bulk Nb. The normal-state behavior is characterized by low residual-resistivity ratios (RRR), indicating significant disorder and grain-boundary scattering. Based on the measured Tc values and geometry-derived effective current densities (Jc), a phenomenological J-B-T critical-surface model was constructed to estimate the superconducting operating window under simultaneous temperature and magnetic-field loading. The results establish a process-structure-property correlation for sputtered Nb on Si and provide guidance for integrating superconducting thin-film coils into future trapped-ion cryogenic microsystems.