Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International journal of engineering science and advanced technology.

Design and Implementation of a Single-Bit Fault Detecting Reversible Arithmetic Logic Unit Using Fredkin and CNOT Gates

Sandyarani Merugu, Devisingh

Published Jun 26, 2026• 0 citations
Publisher

Abstract

Reduction in dimensions of CMOS technology has resulted in great increase in computing speeds but, at the same time, higher power consumption. Thus, a serious limitation arises since conventional approaches will eventually hit the physical limit [1], [2]. Reversible computing seems promising in the context of VLSI. In theory, it could operate without any energy loss due to lossless information processing [3], [4]. The paper presents development and implementation of a reversible Arithmetic Logic Unit (ALU) based on quantum logic gates working with qubits. The architecture is based on Fredkin gates (quantum cost 5) and CNOT gates (quantum cost 1), both preserving parity and being inherently reversible. The ALU can execute all arithmetic and logical operations and reconfigure operations dynamically according to system requirements. Also, the designed ALU possesses an inherent parity-preserving fault detection mechanism for reliable identification of single-bit faults. Overall the implemented ALU contains 9 CNOT and 7 Fredkin gates resulting in quantum cost equal to 44 and 12 garbage outputs. Thus, the quantum cost and garbage outputs are significantly lower than usual ones for the design of a reversible ALU, which generally amount to 48–65 and 16–20 correspondingly. The designed architecture is described in details through the application of Verilog HDL and simulation in Xilinx Vivado toolset. The work concentrates on optimization of such important parameters as the number of gates, quantum cost, garbage outputs, and constant inputs. Those design parameters are critical in order to develop scalable and sustainable quantum and low-power VLSI architectures.

DOI
10.5281/zenodo.20905636

Related papers

Quantum-Ready ALU: Optimized Design Using Reversible Logic with RTL Design and FPGA Implementation

Agnik Maity, Sumedha Pal, Asmita Sarkar +3 more

Reversible logic provides a foundation for nextgeneration computing systems, particularly in quantum and emerging nanotechnology-based architectures. Unlike conventional logic, reversible gates preserve information and support backward computation, making them crucial for designing quantum circuits. This paper introduces a reversible Arithmetic and Logic Unit (ALU) that performs eight fundamental operations-AND, OR, NOT, XOR, addition, subtraction, increment, and decrement-using Fredkin, Peres, TR, and modified Fredkin gates. A dedicated control unit manages operation selection, ensuring functional flexibility and circuit efficiency. The proposed design achieves significant improvements by minimizing ancilla inputs, quantum cost and garbage outputs, resulting in a total quantum cost of 71 and contains 16 reversible gates and 14 garbage outputs. The architecture was modeled and verified using Xilinx Vivado HLS and ISE 14.7, and implemented on the Nexys A7 (Artix-7) FPGA platform. Comparative analysis demonstrates better efficiency than existing reversible ALU designs, establishing the proposed circuit as a strong candidate for quantum computing and other advanced computing paradigms.

International Conference on Electronics, Materials Engineering & Nano-Technology (IEMENTech)•Feb 6, 2026•2 citations

Design and Implementation of a Low-Power ALU Using Quaternary Reversible Logic for Optimized Quantum Cost

R Leelavathi, K Lakshmi Vyshnavi, P Nagendra +3 more

Reversible computing has emerged as a promising solution for reducing energy dissipation in digital systems by addressing the fundamental limitations caused by information loss.Quaternary reversible logic, which uses multi-valued representations, provides higher information density, reduced interconnect complexity, and better scalability when compared to conventional binary logic.This work presents the design and implementation of a quaternary reversible Arithmetic Logic Unit (ALU) that integrates essential computational modules, including arithmetic units, logical units, memory units, decoders, and multiplexers.The proposed architecture supports efficient data routing and precise operation control through a scalable control unit and a selection-line-based design approach.The designed ALU demonstrates reduced quantum cost, fewer garbage outputs, and minimized constant inputs in comparison with existing reversible ALU designs, while remaining compatible with larger reversible and quantum computing architectures.Simulation results and comparative analysis validate the improved efficiency and low-power potential of the proposed system, making it suitable for next-generation computing applications.The complete design is implemented using Verilog HDL and synthesized and simulated using Xilinx Vivado Design Suite 2025.

International Journal of Emerging Research in Science Engineering and Management•Mar 30, 2026•0 citations

An Arithmetic and Logical Unit using Reversible Gates

Parth Khatter, Neeta Pandey, Kirti Gupta

This paper presents novel one bit arithmetic and logical unit (ALU) design using basic reversible gates. Two designs for both the arithmetic and the logical unit are proposed and one design for the control unit is also put forward. These designs are integrated together to give four complete ALU designs. Each of the proposed design has been implemented in Verilog HDL using Xilinx ISE Suite 14.1 software to verify its functionality. The proposed designs are compared based on quantum cost, garbage outputs and ancilla inputs with their existing counterparts. The simplicity and the reduced quantum cost of the proposed ALU designs, when compared to the existing ones, makes them ideal candidates to be used as modules in quantum computers. The proposed ALUs extend their applications to cryptography, machine learning and nanotechnology.

International Conference on Computing, Power and Communication Technologies (GUCON)•Sep 1, 2018•20 citations

Fault Tolerant Arithmetic and Logic Unit in Reversible Logic for Low Power Applications

S. Girija, Sangeetha B.G

To meet expectations of the futuristic technologies, thrust is on fast communication, low power, high computational speeds with delay intolerance. VLSI technology is laboring to meet the demands by incorporating low-power solutions to improve performance. Component size has come to Nano scales however, it has challenges of managing heat dissipation and physical limitations in fabrication. Reversible logic technology has gained momentum in research due to its prominence in Quantum computing and zero power dissipation. The arithmetic and Logic Unit is the significant component of any computing architecture, carrying out operations rigorously while consuming power for the endurance of performance. The proposed approach of designing the fault-tolerant Arithmetic and Logical Unit (ALU) in reversible logic for future computers. Analysis of the proposed design to existing designs is on the quantum cost (QC), garbage output (GO), ancilla input (AI), gate utilization (GC) and number of operations achieved. Improvements observed is at an average of 70% in AI and GC, 59% in QC , 53% in GO and operations are up by 33% to cater to the least power consumption applications.

•Oct 4, 2021•0 citations

A New Quantum Efficient Fault Tolerant Parity Preserving Clifford + T ALU

Shekoofeh Moghimi, Mohammad Reza Reshadinezhad, Antonio Rubio

Reversible logic is characterized by its feature of being a prominent application in low-power conventional computers and the most compatible logic in quantum computers. Quantum circuits executes quantum algorithms and are important in a new generation of advanced computing. However, they are highly error-prone and also subject to the use of limited and sensitive physical resources like qubits and quantum gates. This paper introduces a comprehensive fault tolerant quantum-based reversible circuit which can calculate a high variety number of arithmetic and logic operations. It uses both: parity preserving method for detecting one or an odd number of bit errors, and Clifford + T implementation for protecting circuits against decoherence faults. First, we propose a new fault-tolerant (parity preserving and Clifford + T) adder/subtractor and derive a quantum reversible Arithmetic and Logic Unit (ALU). These modules reach the most optimized extent of circuit line, ancilla inputs, and garbage outputs according to the logical analysis done in this work. This article focuses on reducing T-cost metrics in conjunction with enhancing the number of operations and quantum costs in proposed circuits compared to other counterparts. We propose 4-bit fault tolerant ALU derived from our proposed single-bit module to show the proposed circuit can be extended to any larger size. The proposed circuit is implemented in the Qiskit simulation tool, and output results confirm the accuracy of our design functionality. The proposed full adder/ subtractor achieves an average of 64% and 43%, and the proposed ALU circuit achieves an average of 38% and 27% improvement in T-count and T-depth, respectively compared to their counterparts. The proposed reversible quantum-optimized fault tolerant adder/subtractor and ALU units can be applied as the basic part of DSP systems and quantum processor units in quantum computing devices.

IEEE Transactions on Emerging Topics in Computing•Apr 1, 2026•0 citations

Design and implementation of arithmetic and logic unit (ALU) using novel reversible gates in quantum cellular automata

A. Kamaraj, P. Marichamy

In the current scenario, power consumption, speed, size and heat dissipation are the huge challenge in the semiconductor industries. When the size of the single computing element is reduced then the speed can be improved and also if the power dissipation is reduced then the heat dissipation will be less. The possible solution for these two problems is the Reversible Logic and Quantum Cellular Automata (QCA). The Reversible Logic is considered to be the promising technology to the future Quantum computer technologies. The Reversible Logic gates prune the power dissipation to a larger extent. In this paper Novel Reversible Gates are proposed with Reversibility and Universality. The Arithmetic and Logic Unit (ALU) is designed with the proposed Reversible Gates in Reversible Logic. The designed Arithmetic and Logic unit is evaluated in QCA with the required specifications. The Arithmetic and Logic Unit is designed by setting the control inputs for each unit. The parameters taken into account are Quantum Cost (QC), Garbage Outputs (GO), Constant Inputs (CI), Area, Number of Cells and Simulation Time. The proposed ALU adopting Novel gates finds utilization in low power applications. Also it can be used as the module in the Quantum computers due to its reduced Quantum Cost and Garbage outputs. The Proposed design extends its applications over Quantum Computing, Optical Computing, Nanotechnology and DNA mapping.

International Conference on Advanced Computing and Communication Systems (ICACCS)•Jan 1, 2017•22 citations
Reduction in dimensions of CMOS technology has resulted in great increase in computing speeds but, at the same time, higher power consumption. Thus, a serious limitation arises since conventional approaches will eventually hit the physical limit [1], [2]. Reversible computing seems promising in the context of VLSI. In theory, it could operate without any energy loss due to lossless information processing [3], [4]. The paper presents development and implementation of a reversible Arithmetic Logic Unit (ALU) based on quantum logic gates working with qubits. The architecture is based on Fredkin gates (quantum cost 5) and CNOT gates (quantum cost 1), both preserving parity and being inherently reversible. The ALU can execute all arithmetic and logical operations and reconfigure operations dynamically according to system requirements. Also, the designed ALU possesses an inherent parity-preserving fault detection mechanism for reliable identification of single-bit faults. Overall the implemented ALU contains 9 CNOT and 7 Fredkin gates resulting in quantum cost equal to 44 and 12 garbage outputs. Thus, the quantum cost and garbage outputs are significantly lower than usual ones for the design of a reversible ALU, which generally amount to 48–65 and 16–20 correspondingly. The designed architecture is described in details through the application of Verilog HDL and simulation in Xilinx Vivado toolset. The work concentrates on optimization of such important parameters as the number of gates, quantum cost, garbage outputs, and constant inputs. Those design parameters are critical in order to develop scalable and sustainable quantum and low-power VLSI architectures.
Reversible logic provides a foundation for nextgeneration computing systems, particularly in quantum and emerging nanotechnology-based architectures. Unlike conventional logic, reversible gates preserve information and support backward computation, making them crucial for designing quantum circuits. This paper introduces a reversible Arithmetic and Logic Unit (ALU) that performs eight fundamental operations-AND, OR, NOT, XOR, addition, subtraction, increment, and decrement-using Fredkin, Peres, TR, and modified Fredkin gates. A dedicated control unit manages operation selection, ensuring functional flexibility and circuit efficiency. The proposed design achieves significant improvements by minimizing ancilla inputs, quantum cost and garbage outputs, resulting in a total quantum cost of 71 and contains 16 reversible gates and 14 garbage outputs. The architecture was modeled and verified using Xilinx Vivado HLS and ISE 14.7, and implemented on the Nexys A7 (Artix-7) FPGA platform. Comparative analysis demonstrates better efficiency than existing reversible ALU designs, establishing the proposed circuit as a strong candidate for quantum computing and other advanced computing paradigms.
Reversible computing has emerged as a promising solution for reducing energy dissipation in digital systems by addressing the fundamental limitations caused by information loss.Quaternary reversible logic, which uses multi-valued representations, provides higher information density, reduced interconnect complexity, and better scalability when compared to conventional binary logic.This work presents the design and implementation of a quaternary reversible Arithmetic Logic Unit (ALU) that integrates essential computational modules, including arithmetic units, logical units, memory units, decoders, and multiplexers.The proposed architecture supports efficient data routing and precise operation control through a scalable control unit and a selection-line-based design approach.The designed ALU demonstrates reduced quantum cost, fewer garbage outputs, and minimized constant inputs in comparison with existing reversible ALU designs, while remaining compatible with larger reversible and quantum computing architectures.Simulation results and comparative analysis validate the improved efficiency and low-power potential of the proposed system, making it suitable for next-generation computing applications.The complete design is implemented using Verilog HDL and synthesized and simulated using Xilinx Vivado Design Suite 2025.
This paper presents novel one bit arithmetic and logical unit (ALU) design using basic reversible gates. Two designs for both the arithmetic and the logical unit are proposed and one design for the control unit is also put forward. These designs are integrated together to give four complete ALU designs. Each of the proposed design has been implemented in Verilog HDL using Xilinx ISE Suite 14.1 software to verify its functionality. The proposed designs are compared based on quantum cost, garbage outputs and ancilla inputs with their existing counterparts. The simplicity and the reduced quantum cost of the proposed ALU designs, when compared to the existing ones, makes them ideal candidates to be used as modules in quantum computers. The proposed ALUs extend their applications to cryptography, machine learning and nanotechnology.
To meet expectations of the futuristic technologies, thrust is on fast communication, low power, high computational speeds with delay intolerance. VLSI technology is laboring to meet the demands by incorporating low-power solutions to improve performance. Component size has come to Nano scales however, it has challenges of managing heat dissipation and physical limitations in fabrication. Reversible logic technology has gained momentum in research due to its prominence in Quantum computing and zero power dissipation. The arithmetic and Logic Unit is the significant component of any computing architecture, carrying out operations rigorously while consuming power for the endurance of performance. The proposed approach of designing the fault-tolerant Arithmetic and Logical Unit (ALU) in reversible logic for future computers. Analysis of the proposed design to existing designs is on the quantum cost (QC), garbage output (GO), ancilla input (AI), gate utilization (GC) and number of operations achieved. Improvements observed is at an average of 70% in AI and GC, 59% in QC , 53% in GO and operations are up by 33% to cater to the least power consumption applications.
Reversible logic is characterized by its feature of being a prominent application in low-power conventional computers and the most compatible logic in quantum computers. Quantum circuits executes quantum algorithms and are important in a new generation of advanced computing. However, they are highly error-prone and also subject to the use of limited and sensitive physical resources like qubits and quantum gates. This paper introduces a comprehensive fault tolerant quantum-based reversible circuit which can calculate a high variety number of arithmetic and logic operations. It uses both: parity preserving method for detecting one or an odd number of bit errors, and Clifford + T implementation for protecting circuits against decoherence faults. First, we propose a new fault-tolerant (parity preserving and Clifford + T) adder/subtractor and derive a quantum reversible Arithmetic and Logic Unit (ALU). These modules reach the most optimized extent of circuit line, ancilla inputs, and garbage outputs according to the logical analysis done in this work. This article focuses on reducing T-cost metrics in conjunction with enhancing the number of operations and quantum costs in proposed circuits compared to other counterparts. We propose 4-bit fault tolerant ALU derived from our proposed single-bit module to show the proposed circuit can be extended to any larger size. The proposed circuit is implemented in the Qiskit simulation tool, and output results confirm the accuracy of our design functionality. The proposed full adder/ subtractor achieves an average of 64% and 43%, and the proposed ALU circuit achieves an average of 38% and 27% improvement in T-count and T-depth, respectively compared to their counterparts. The proposed reversible quantum-optimized fault tolerant adder/subtractor and ALU units can be applied as the basic part of DSP systems and quantum processor units in quantum computing devices.
In the current scenario, power consumption, speed, size and heat dissipation are the huge challenge in the semiconductor industries. When the size of the single computing element is reduced then the speed can be improved and also if the power dissipation is reduced then the heat dissipation will be less. The possible solution for these two problems is the Reversible Logic and Quantum Cellular Automata (QCA). The Reversible Logic is considered to be the promising technology to the future Quantum computer technologies. The Reversible Logic gates prune the power dissipation to a larger extent. In this paper Novel Reversible Gates are proposed with Reversibility and Universality. The Arithmetic and Logic Unit (ALU) is designed with the proposed Reversible Gates in Reversible Logic. The designed Arithmetic and Logic unit is evaluated in QCA with the required specifications. The Arithmetic and Logic Unit is designed by setting the control inputs for each unit. The parameters taken into account are Quantum Cost (QC), Garbage Outputs (GO), Constant Inputs (CI), Area, Number of Cells and Simulation Time. The proposed ALU adopting Novel gates finds utilization in low power applications. Also it can be used as the module in the Quantum computers due to its reduced Quantum Cost and Garbage outputs. The Proposed design extends its applications over Quantum Computing, Optical Computing, Nanotechnology and DNA mapping.