Precise alignment of an optical potential with a micrometer-scale magnetic trap near an atom chip is technically challenging compared with free-space systems. We investigate a double-well potential created by a focused, blue-detuned laser beam superimposed on an atom-chip magnetic trap for manipulating cold 87 Rb atoms. The measured separation of atomic clouds in the double well serves as a sensitive indicator of the laser focus: the separation reaches a minimum when the beam is aligned with the center of the magnetic trap. We develop a theoretical model for the combined magnetic and optical potentials and the resulting atomic motion, and validate its predictions using Monte Carlo simulations over a broad range of trap frequencies, barrier heights, and temperatures. Both the model and simulations show that optimal alignment corresponds to the minimum observable separation between the two atomic clouds. Parameter scans further reveal that stronger axial confinement and lower temperatures enhance the detectability of this minimum, providing a practical optical-alignment method for atom-chip systems in which direct beam characterization near the surface is difficult.
Precise alignment of an optical potential with a micrometer-scale magnetic trap near an atom chip is technically challenging compared with free-space systems. We investigate a double-well potential created by a focused, blue-detuned laser beam superimposed on an atom-chip magnetic trap for manipulating cold 87 Rb atoms. The measured separation of atomic clouds in the double well serves as a sensitive indicator of the laser focus: the separation reaches a minimum when the beam is aligned with the center of the magnetic trap. We develop a theoretical model for the combined magnetic and optical potentials and the resulting atomic motion, and validate its predictions using Monte Carlo simulations over a broad range of trap frequencies, barrier heights, and temperatures. Both the model and simulations show that optimal alignment corresponds to the minimum observable separation between the two atomic clouds. Parameter scans further reveal that stronger axial confinement and lower temperatures enhance the detectability of this minimum, providing a practical optical-alignment method for atom-chip systems in which direct beam characterization near the surface is difficult.
Abstract Atom chips provide flexible technologies for implementing modern concepts in quantum optics, quantum measurement, and quantum information processing. Atom chips are miniature devices that confine, control and manipulate cold atoms using electric, magnetic, and light fields. Due to the shrinkage of scale, arbitrary magnetic traps can be generated from current sources outside the chip’s vacuum compartment, in contrast to a traditional setup. This makes it easy to change trap configurations in an experiment that involves rapid prototyping of quantum states and quantum trajectory designs in free space. In this work, we show relevant parameters needed for transferring a cold atom cloud at the recoil limit from a magneto-optical trap (MOT) to an area close to the atom chip. To create a movable magnetic potential for this transfer, we used the MOT coils and an additional pair of coils in an anti-Helmholtz configuration. The properties of the movable potential were obtained by performing the Computer Simulation Tool (CST EM Studio suite®). Furthermore, an appropriate magnetic trap on a chip is developed, based on the simulation from COMSOL Multiphysics. We used a magnetic field gradient of around 20 G/cm to transport the cold atom with a distance over 20 mm with a temperature gain below 100 micro-Kelvin. The simulation results are based on an atom chip with a size of 2×2 cm2 and a copper wire thickness of 2 mm. The atom chip consists of Z, U and I-shaped wires that generate a quadrupole magnetic field. The resulting field minimum can be made at least 7 mm away from the chip surface.
Ultracold atomic gases can be utilised as extremely sensitive probes of their surrounding environment. In particular, samples of ultracold atoms confined using chip-based microtraps are an ideal tool for mapping electric and magnetic field landscapes. Over the course of this thesis, a new experiment capable of performing surface microscopy using magnetically trapped clouds of cold rubidium-87 atoms has been built. The focus of the work is on the design and construction of the experimental system, which must incorporate many different aspects for manipulating thermal atomic gases, with a view to positioning them at sub-micron distances from special surfaces. This reduced atom-surface separation is necessary for implementing a high resolution, high sensitivity magnetic field sensor with cold atoms. Although current microfabrication techniques easily enable trapping at distances on the order of micrometres, several distance-dependent surface effects - such as the Casimir-Polder force, Johnson-Nyquist noise, and stray potentials - eventually impede magnetic trapping at the sub-micron level. These surface effects can greatly modify the confining potentials, which reduces the trap depth and consequently leads to an additional loss rate of atoms from the trap. We have explored the possibility of using special surfaces such as nano-membranes of silicon nitride and graphene, which have reduced atom- surface interactions, to enable trapping distances at the sub-micron level. A multilayer printed circuit board chip has been designed to form an initial magnetic trap and then transport the cloud of atoms to a desired location over the samples. This chip, along with various samples, is mounted on a custom-made electrical feedthrough designed to make connections to all conductor that are inside the vacuum chamber. The initial cloud of cold atoms can then be prepared in the central region of the chip and delivered to the location of the samples on either side. The experimental system is able to routinely capture over 10^8 rubidium-87 atoms at a temperature of 80 micro-Kelvin in a magneto-optical trap using a novel scheme of five laser beams. A method is demonstrated for enhancing the atom number in the magneto-optical traps by a factor of two by using laser beams with two slightly different frequencies. Atoms from the magneto-optical trap are then transferred to a purely magnetic trap formed by the wires on the printed circuit board chip. Time-dependent currents in the chip wires then create a dynamic potential, which is shown to successfully transport the atomic sample over a distance of 12 millimetre with minimal atom loss. This thesis describes the development of the apparatus in detail, along with careful characterisation of the cold cloud at various stages of the experimental sequence. Initial results on the long distance atom transport are presented. Finally, the experimental results of the two frequency magneto-optical trap for atom number improvement are discussed.
We report on progress for a couple of experiments on manipulating cold atoms on a chip for quantum sensing. The first experiments are directed towards developing a compact atom interferometer on an atom chip using a double-well potential. The interferometer uses 87Rb atoms magnetically confined in an atomic waveguide produced by wires on the surface of a lithographically patterned chip. Finite element modeling of combinations of different current configurations with various external bias fields indicated a means of coherently splitting the atomic cloud through dynamically adjusting the currents and bias fields. In these experiments we investigate real-time transformations between different double-well configurations adiabatically and non-adiabatically, and study their effects on the initially trapped atoms. Coherence properties of the two atomic wavepackets are examined. In another set of experiments we investigate the properties of bosons confined to (quasi) one dimension in our magnetic waveguide. When the atom-atom repulsive interaction becomes much larger than the kinetic energy, bosons confined in one dimension can enter a new state of matter, the Tonks-Girardeau gas, in which they behave like non-interacting fermions. However, the bosons can still occupy the same momentum state and therefore the gas cannot be fully described by either Bose-Einstein or Fermi-Dirac statistics. This transition has been observed in optical lattices but not in magnetic atom chip waveguides. We discuss the conditions for obtaining a Tonks-Girardeau gas with 87Rb atoms in our atom chip waveguide as well as a novel signature for observing the transition in our system.
The loading and guiding of a launched cloud of cold atoms with the optical dipole force are theoretically and numerically modelled. A far-off resonance trap can be realised using a high power Gaussian mode laser, red-detuned with respect to the principal atomic resonance (Rb 5s-5p). The optimum strategy for loading typically 30% of the atoms from a Magneto optical trap and guiding them vertically through 22 cm is discussed. During the transport the radial size of the cloud is confined to a few hundred microns, whereas the unconfined axial size grows to be approximately 1 cm. It is proposed that the cloud can be focused in three dimensions at the apex of the motion by using a single magnetic impulse to achieve axial focusing. A theoretical study of six current-carrying coil and bar arrangements that generate magnetic lenses is made. An investigation of focusing aberrations show that, for typical experimental parameters, the widely used assumption of a purely harmonic lens is often inaccurate. A new focusing regime is discussed: isotropic 3D focusing of atoms with a single magnetic lens. The baseball lens offers the best possibility for isotropically focusing a cloud of weak-field-seeking atoms in 3D.A pair of magnetic lens pulses can also be used to create a 3D focus (the alternate-gradient method). The two possible pulse sequences are discussed and it is found that they are ideal for loading both 'pancake' and 'sausage’ shaped magnetic/optical microtraps. It is shown that focusing aberrations are considerably smaller for double-impulse magnetic lenses compared to single- impulse magnetic lenses. The thesis concludes by describing the steps taken towards creating a 3D quasi- electrostatic lattice for 85Ilb, using a CՕշ laser. The resulting lattice of trapped atoms will have a low decoherence, and with resolvable lattice sites, it therefore provides a useful system to implement quantum information processing.
Atom optics has been a highly active field of research with many scientific breakthroughs over the past two decades, largely due to successful advances in laser technology, microfabrication techniques, and the development of laser cooling and trapping of neutral atoms. This dissertation details several atom optics experiments with the motivation to develop tools and techniques for precision atom wave interferometry. It provides background information about atom optics and the fundamentals behind laser cooling and trapping, including basic techniques for cold gas thermometry and absorptive detection of atoms. A brief overview of magnetic trapping and guiding in tight wire-based traps is also provided before the experimental details are presented. ❧ We developed a novel laser source of 780 nm light using frequency-doubled 1560 nm fiber amplifier. This laser system provided up to a Watt of tunable frequency stabilized light for two Rb laser cooling and trapping experiments. One system generates Bose-Einstein condensates in an optical trap while the second is based on atom chip magnetic traps. The atom chip system, detailed in this thesis, was designed and built to develop the tools necessary for transport and loading large numbers of cold atoms and explore the potential for guided atom interferometry. Techniques and results from this experiment are presented, including an efficient magnetic transport and loading method to deliver cold atom to atom chip traps. We also developed a modeling tool for the magnetic fields formed by coiled wire geometries, as well as planar wire patterns. These models helped us design traps and determine adiabatic transportation of cold atoms between macro-scale traps and micro-traps formed on atom chips. Having achieved near unity transfer efficiency, we demonstrated that this approach promises to be a consistent method for loading large numbers of atoms into micro-traps. Furthermore, we discuss an in situ imaging technique to investigate magnetic field contours of the traps and the dynamics of atoms within those confining potentials. We also controlled the propagation along the atom chip guides by accelerating atoms with longitudinal magnetic gradients, and investigated an atom focusing scheme. ❧ While the atom chip wire guides perform a role analogous to optical fibers guiding light waves, ""free space"" cold atoms offer great opportunity for precision interferometry. We describe a second on-going atom optics experiment that measures gravity gradients using a pair of atom fountain interferometers separated by one meter. We have demonstrated Gravity Gradiometer resolution down to 4x10⁻⁹ g/m using a 40 kg test mass. The atomic physics subsystem is described in detail, including the vacuum, cold atom source, optics, magnetic coils and shields, and vibration isolation and compensation. The system is designed to be a compact, robust, transportable instrument, taking strides towards future gravity gradient measurements in the field. In the realm of space applications, there has been interest for micro-gravity science experiments aboard the International Space Station, along with instrument development for gravity mapping of Earth and planetary bodies with satellite-based instruments. Furthermore, there are ground-based applications for gravity imaging of local density distributions, precision measurement of gravity, as well as proposals for redefining the kilogram, detecting gravitational waves and determining the Gravitational constant.