Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Journal of Quantum Information

An analysis of Shor and Steane code performance under coherent errors

Chaobin Liu

Published Jun 17, 2026• 0 citations
Publisher

Abstract

We derive explicit process matrices (effective channels) for the Shor code (a nine-qubit code) and the Steane code (a seven-qubit code) under any unital error channel applied to each physical qubit. These matrices provide valuable insights into the performance of these codes. The derived process matrix enables a rigorous proof that a concatenated code with a symmetric decoder can map an open set of arbitrary error channels to the identity channel. This result generalizes a previously established theorem, which was limited to an open set of diagonal error channels. For commonly studied coherent error models, we leverage the process matrices to perform precise analyses of code performance in terms of average gate infidelity and diamond distance, comparing the physical error channels to the resulting effective channels after error correction. These results refine and extend related findings in prior works.

DOI
10.1142/s021974992650019x

Related papers

Performance of quantum error correction with coherent errors

Eric Huang, Andrew C. Doherty, Steven T. Flammia

We compare the performance of quantum error correcting codes when memory errors are unitary with the more familiar case of dephasing noise. For a wide range of codes, we analytically compute the effective logical channel that results when the error correction steps are performed noiselessly. Our examples include the entire family of repetition codes, the five-qubit, Steane, Shor, and surface codes. When errors are measured in terms of the diamond norm, we find that the error correction is typically much more effective for unitary errors than for dephasing. We observe this behavior for a wide range of codes after a single level of encoding, and in the thresholds of concatenated codes using hard decoders. We show that this holds with great generality by proving a bound on the performance of any stabilizer code when the noise at the physical level is unitary. By comparing the diamond norm error ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}$ of the logical qubit with the same quantity at the physical level ${D}_{\ensuremath{\diamond}}$, we show that ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}\ensuremath{\le}c{D}_{\ensuremath{\diamond}}^{d}$ where $d$ is the distance of the code and $c$ is a constant that depends on the code but not on the error. This bound compares very favorably to the performance of error correction for dephasing noise and other Pauli channels, where an error correcting code of odd distance $d$ will exhibit a scaling ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}\ensuremath{\sim}{D}_{\ensuremath{\diamond}}^{(d+1)/2}$.

arXiv:1805.08227•Physical Review A•Feb 12, 2019•88 citations

Robustness of the concatenated quantum error-correction protocol against noise for channels affected by fluctuation

Long Yang Huang, Xiaohua Wu, Tao Zhou

In quantum error correction, the description of the noise channel cannot be completely accurate and fluctuation always appears in the noise channel. It is found that when fluctuation of the physical noise channel is considered, the average effective channel is dependent only on the average of the physical noise channel, and the average of the physical noise channel here plays the role of the independent error model in previous works. Now one may conclude that in the independent error model, the results in previous works are also valid for the average channel where fluctuation exists. In some typical cases, our numerical simulations in the concatenated quantum error-correction protocol with a five-qubit code, seven-qubit Steane code, and nine-qubit Shor confirm this conjecture. For a five-qubit code, the effective channels approximate to the depolarizing channel as the concatenated level increases. For the Steane code, the effective channels approximate to one Pauli channel as the concatenated level increases. For the Shor code, the effective channels approximate to either a Pauli-$X$ or Pauli-$Z$ channel in each level, and in the next concatenated level, the effective channels approximate to the other. The numerical results for these codes indicate that the degree of approximation increases as the concatenated level increases, and the fluctuation of the noise channel decays exponentially as concatenated quantum error correction is performed. On the error-correction threshold, the attenuation ratio of the standard deviation of channel fidelity has a roughly stable value. In contrast, standard deviations of off-diagonal elements of the quantum process matrix (Pauli form) decay more quickly than standard deviations of diagonal elements.

arXiv:1810.00390•Physical Review A•Oct 21, 2019•5 citations

Generalized Performance of Concatenated Quantum Codes—A Dynamical Systems Approach

J. Fern, Julia Kempe, S.N. Simic +1 more

We apply a dynamical systems approach to concatenation of quantum error correcting codes, extending and generalizing the results of Rahn to both diagonal and nondiagonal channels. Our point of view is global: instead of focusing on particular types of noise channels, we study the geometry of the coding map as a discrete-time dynamical system on the entire space of noise channels. In the case of diagonal channels, we show that any code with distance at least three corrects (in the infinite concatenation limit) an open set of errors. For Calderbank–Shor–Steane (CSS) codes, we give a more precise characterization of that set. We show how to incorporate noise in the gates, thus completing the framework. We derive some general bounds for noise channels, which allows us to analyze several codes in detail.

arXiv:quant-ph/0409084•IEEE Transactions on Automatic Control•Mar 1, 2006•21 citations

Errors and pseudothresholds for incoherent and coherent noise

Mauricio Gutiérrez, Conor Smith, Livia Lulushi +2 more

We compare the effect of single qubit incoherent and coherent errors on the logical error rate of the Steane [[7,1,3]] quantum error correction code by performing an exact full-density-matrix simulation of an error correction step. We find that the effective 1-qubit process matrix at the logical level reveals the key differences between the error models and provides insight into why the Pauli twirling approximation is a good approximation for incoherent errors and a poor approximation for coherent ones. Approximate channels composed of Clifford operations and Pauli measurement operators that are pessimistic at the physical level result in pessimistic error rates at the logical level. In addition, we observe that the pseudothreshold can differ by a factor of 5 depending on whether the error is calculated using the fidelity or the distance.

arXiv:1605.03604•Physical Review A•Oct 24, 2016•59 citations

Exact performance of concatenated quantum codes

Benjamin Rahn, Andrew C. Doherty, Hideo Mabuchi

When a logical qubit is protected using a quantum error-correcting code, the net effect of coding, decoherence (a physical channel acting on qubits in the codeword) and recovery can be represented exactly by an effective channel acting directly on the logical qubit. In this paper we describe a procedure for deriving the map between physical and effective channels that results from a given coding and recovery procedure. We show that the map for a concatenation of codes is given by the composition of the maps for the constituent codes. This perspective leads us to an efficient means for calculating the exact performance of quantum codes with arbitrary levels of concatenation. We present explicit results for single-bit Pauli channels. For certain codes under the symmetric depolarizing channel, we use the coding maps to compute exact threshold error probabilities for achievability of perfect fidelity in the infinite concatenation limit.

arXiv:quant-ph/0111003•Physical Review A•Sep 13, 2002•69 citations

Modeling coherent errors in quantum error correction

Daniel Greenbaum, Zachary Dutton

Analysis of quantum error correcting codes is typically done using a stochastic, Pauli channel error model for describing the noise on physical qubits. However, it was recently found that coherent errors (systematic rotations) on physical data qubits result in both physical and logical error rates that differ significantly from those predicted by a Pauli model. Here we examine the accuracy of the Pauli approximation for noise containing coherent errors (characterized by a rotation angle ) under the repetition code. We derive an analytic expression for the logical error channel as a function of arbitrary code distance d and concatenation level n , in the small error limit. We find that coherent physical errors result in logical errors that are partially coherent and therefore non-Pauli. However, the coherent part of the logical error is negligible at fewer than error correction cycles when the decoder is optimized for independent Pauli errors, thus providing a regime of validity for the Pauli approximation. Above this number of correction cycles, the persistent coherent logical error will cause logical failure more quickly than the Pauli model would predict, and this may need to be combated with coherent suppression methods at the physical level or larger codes.

arXiv:1612.03908•Quantum Science and Technology•Dec 20, 2017•90 citations
We derive explicit process matrices (effective channels) for the Shor code (a nine-qubit code) and the Steane code (a seven-qubit code) under any unital error channel applied to each physical qubit. These matrices provide valuable insights into the performance of these codes. The derived process matrix enables a rigorous proof that a concatenated code with a symmetric decoder can map an open set of arbitrary error channels to the identity channel. This result generalizes a previously established theorem, which was limited to an open set of diagonal error channels. For commonly studied coherent error models, we leverage the process matrices to perform precise analyses of code performance in terms of average gate infidelity and diamond distance, comparing the physical error channels to the resulting effective channels after error correction. These results refine and extend related findings in prior works.
We compare the performance of quantum error correcting codes when memory errors are unitary with the more familiar case of dephasing noise. For a wide range of codes, we analytically compute the effective logical channel that results when the error correction steps are performed noiselessly. Our examples include the entire family of repetition codes, the five-qubit, Steane, Shor, and surface codes. When errors are measured in terms of the diamond norm, we find that the error correction is typically much more effective for unitary errors than for dephasing. We observe this behavior for a wide range of codes after a single level of encoding, and in the thresholds of concatenated codes using hard decoders. We show that this holds with great generality by proving a bound on the performance of any stabilizer code when the noise at the physical level is unitary. By comparing the diamond norm error ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}$ of the logical qubit with the same quantity at the physical level ${D}_{\ensuremath{\diamond}}$, we show that ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}\ensuremath{\le}c{D}_{\ensuremath{\diamond}}^{d}$ where ddd is the distance of the code and ccc is a constant that depends on the code but not on the error. This bound compares very favorably to the performance of error correction for dephasing noise and other Pauli channels, where an error correcting code of odd distance ddd will exhibit a scaling ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}\ensuremath{\sim}{D}_{\ensuremath{\diamond}}^{(d+1)/2}$.
In quantum error correction, the description of the noise channel cannot be completely accurate and fluctuation always appears in the noise channel. It is found that when fluctuation of the physical noise channel is considered, the average effective channel is dependent only on the average of the physical noise channel, and the average of the physical noise channel here plays the role of the independent error model in previous works. Now one may conclude that in the independent error model, the results in previous works are also valid for the average channel where fluctuation exists. In some typical cases, our numerical simulations in the concatenated quantum error-correction protocol with a five-qubit code, seven-qubit Steane code, and nine-qubit Shor confirm this conjecture. For a five-qubit code, the effective channels approximate to the depolarizing channel as the concatenated level increases. For the Steane code, the effective channels approximate to one Pauli channel as the concatenated level increases. For the Shor code, the effective channels approximate to either a Pauli-XXX or Pauli-ZZZ channel in each level, and in the next concatenated level, the effective channels approximate to the other. The numerical results for these codes indicate that the degree of approximation increases as the concatenated level increases, and the fluctuation of the noise channel decays exponentially as concatenated quantum error correction is performed. On the error-correction threshold, the attenuation ratio of the standard deviation of channel fidelity has a roughly stable value. In contrast, standard deviations of off-diagonal elements of the quantum process matrix (Pauli form) decay more quickly than standard deviations of diagonal elements.
We apply a dynamical systems approach to concatenation of quantum error correcting codes, extending and generalizing the results of Rahn to both diagonal and nondiagonal channels. Our point of view is global: instead of focusing on particular types of noise channels, we study the geometry of the coding map as a discrete-time dynamical system on the entire space of noise channels. In the case of diagonal channels, we show that any code with distance at least three corrects (in the infinite concatenation limit) an open set of errors. For Calderbank–Shor–Steane (CSS) codes, we give a more precise characterization of that set. We show how to incorporate noise in the gates, thus completing the framework. We derive some general bounds for noise channels, which allows us to analyze several codes in detail.
We compare the effect of single qubit incoherent and coherent errors on the logical error rate of the Steane [[7,1,3]] quantum error correction code by performing an exact full-density-matrix simulation of an error correction step. We find that the effective 1-qubit process matrix at the logical level reveals the key differences between the error models and provides insight into why the Pauli twirling approximation is a good approximation for incoherent errors and a poor approximation for coherent ones. Approximate channels composed of Clifford operations and Pauli measurement operators that are pessimistic at the physical level result in pessimistic error rates at the logical level. In addition, we observe that the pseudothreshold can differ by a factor of 5 depending on whether the error is calculated using the fidelity or the distance.
When a logical qubit is protected using a quantum error-correcting code, the net effect of coding, decoherence (a physical channel acting on qubits in the codeword) and recovery can be represented exactly by an effective channel acting directly on the logical qubit. In this paper we describe a procedure for deriving the map between physical and effective channels that results from a given coding and recovery procedure. We show that the map for a concatenation of codes is given by the composition of the maps for the constituent codes. This perspective leads us to an efficient means for calculating the exact performance of quantum codes with arbitrary levels of concatenation. We present explicit results for single-bit Pauli channels. For certain codes under the symmetric depolarizing channel, we use the coding maps to compute exact threshold error probabilities for achievability of perfect fidelity in the infinite concatenation limit.
Analysis of quantum error correcting codes is typically done using a stochastic, Pauli channel error model for describing the noise on physical qubits. However, it was recently found that coherent errors (systematic rotations) on physical data qubits result in both physical and logical error rates that differ significantly from those predicted by a Pauli model. Here we examine the accuracy of the Pauli approximation for noise containing coherent errors (characterized by a rotation angle ) under the repetition code. We derive an analytic expression for the logical error channel as a function of arbitrary code distance d and concatenation level n , in the small error limit. We find that coherent physical errors result in logical errors that are partially coherent and therefore non-Pauli. However, the coherent part of the logical error is negligible at fewer than error correction cycles when the decoder is optimized for independent Pauli errors, thus providing a regime of validity for the Pauli approximation. Above this number of correction cycles, the persistent coherent logical error will cause logical failure more quickly than the Pauli model would predict, and this may need to be combated with coherent suppression methods at the physical level or larger codes.