Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Fault Tolerant Quantum Computing with Lower Overhead

Benjamin Anker

Published May 16, 2026• 0 citations
OpenAlex

Abstract

Quantum computation promises asymptotic speedups over classical algorithms, but realizing these advantages requires overcoming the noisiness of quantum hardware. Although fault-tolerant error correction can allow for reliable quantum computation even using unreliable components, the resource overheads required can substantially erode the asymptotic performance gains. This dissertation focuses on constructing and optimizing fault-tolerant procedures with lower overhead than previous methods were capable of. We present new frameworks for fault-tolerant syndrome extraction using flag gadgets with exponentially reduced ancilla requirements, explicit measurement schedules that achieve asymptotically fewer measurements than stabilizer generators, and a general method for making arbitrary Clifford circuits fault tolerant. In addition, we optimize surface code measurement schedules in the presence of constraints imposed by fabrication defects to reduce logical error rate. Together, these results advance low-overhead fault tolerance and improve performance in resource-constrained and near-term quantum computing settings.

Related papers

Lower overhead fault-tolerant building blocks for noisy quantum computers

Prithviraj Prabhu

Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.

quant-pharXiv:2605.12385•May 13, 2026•0 citations

Quantum Error Detection For Early Term Fault-Tolerant Quantum Algorithms

Tom Ginsberg, Patel, Vyom

Quantum error detection (QED) offers a promising pathway to fault tolerance in near-term quantum devices by balancing error suppression with minimal resource overhead. However, its practical utility hinges on optimizing design parameters-such as syndrome measurement frequency-to avoid diminishing returns from detection overhead. In this work, we present a comprehensive framework for fault-tolerant compilation and simulation of quantum algorithms using [[n, n-2, 2]] codes, which enable low-qubit-overhead error detection and a simple nearly fault-tolerant universal set of operations. We demonstrate and analyze our pipeline with a purely statistical interpretation and through the implementation of Grover's search algorithm. Our results are used to answer the question is quantum error detection a worthwhile avenue for early-term fault tolerance, and if so how can we get the most out of it? Simulations under the circuit-level noise model reveal that finding optimal syndrome schedules improves algorithm success probabilities by an average of 6.7x but eventual statistical limits from post-selection in noisy/resource-limited regimes constrain scalability. Furthermore, we propose a simple data-driven approach to predict fault tolerant compilation parameters, such as optimal syndrome schedules, and expected fault tolerant performance gains based on circuit and noise features. These results provide actionable guidelines for implementing QED in early-term quantum experiments and underscore its role as a pragmatic, constant-overhead error mitigation layer for shallow algorithms. To aid in further research, we release all simulation data computed for this work and provide an experimental QED compiler at https://codeqraft.xyz/qed.

arXiv:2503.10790•Mar 13, 2025•6 citations

Resource optimization for fault-tolerant quantum computing

Adam Paetznick

In this thesis we examine a variety of techniques for reducing the resources required for fault-tolerant quantum computation. First, we show how to simplify universal encoded computation by using only transversal gates and standard error correction procedures, circumventing existing no-go theorems. We then show how to simplify ancilla preparation, reducing the cost of error correction by more than a factor of four. Using this optimized ancilla preparation, we develop improved techniques for proving rigorous lower bounds on the noise threshold. Additional overhead can be incurred because quantum algorithms must be translated into sequences of gates that are actually available in the quantum computer. In particular, arbitrary single-qubit rotations must be decomposed into a discrete set of fault-tolerant gates. We find that by using a special class of non-deterministic circuits, the cost of decomposition can be reduced by as much as a factor of four over state-of-the-art techniques, which typically use deterministic circuits. Finally, we examine global optimization of fault-tolerant quantum circuits under physical connectivity constraints. We adapt techniques from VLSI in order to minimize time and space usage for computations in the surface code, and we develop a software prototype to demonstrate the potential savings.

arXiv:1410.5124•Oct 19, 2014•7 citations

New methods in quantum error correction and fault-tolerant quantum computing

Christopher Chamberland

Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.

•Oct 22, 2018•0 citations

Fault-tolerant syndrome extraction and cat state preparation with fewer qubits

Prithviraj Prabhu, Ben W. Reichardt

We reduce the extra qubits needed for two fault-tolerant quantum computing protocols: error correction, specifically syndrome bit measurement, and cat state preparation. For distance-three fault-tolerant syndrome extraction, we show an exponential reduction in qubit overhead over the previous best protocol. For a weight- w stabilizer, we demonstrate that stabilizer measurement tolerating one fault needs at most ⌈log2⁡w⌉+1 ancilla qubits. If qubits reset quickly, four ancillas suffice. We also study the preparation of entangled cat states, and prove that the overhead for distance-three fault tolerance is logarithmic in the cat state size. These results apply both to near-term experiments with a few qubits, and to the general study of the asymptotic resource requirements of syndrome measurement and state preparation.With a flag qubits, previous methods use O(a) flag patterns to identify faults. In order to use the same flag qubits more efficiently, we show how to use nearly all 2a possible flag patterns, by constructing maximal-length paths through the a -dimensional hypercube.

arXiv:2108.02184•Quantum•Oct 24, 2023•19 citations

Quantum Compiler Design for Fault-Tolerant Quantum Computing

Chenghong Zhu, Jiahan Chen, Keming He +9 more

Scalable quantum computation is expected to rely on fault-tolerant quantum computation (FTQC), in which quantum error correction (QEC) suppresses physical errors sufficiently to support reliable logical operations. This requires quantum compilation to move beyond general-purpose circuit optimization toward encoding-aware and protocol-structured compilation across the full stack of fault-tolerant quantum computers. Beyond circuit synthesis and hardware mapping, an FTQC compiler must lower algorithm-level operations into the logical gate set supported by the chosen code, coordinate encoded data and ancilla resources, realize logical operations together with repeated syndrome extraction under hardware constraints, and provide the resulting measurement stream to real-time decoding. This survey presents a full-stack view of compiler design for QEC-protected quantum computation. We organize existing work into three interacting layers: logical-level QEC compilation, physical-level QEC realization, and decoder runtime integration. At the logical level, we review surface-code lattice-surgery compilers, beyond-surface-code code-surgery frameworks including emerging qLDPC approaches, and compilation support for non-Clifford operations such as magic-state distillation and code switching. At the physical level, we survey hardware-aware QEC realization on superconducting, trapped-ion, and neutral-atom platforms. We further examine decoder models, real-time decoding systems, and frame-management mechanisms that close the feedback loop during fault-tolerant execution. Finally, we identify open challenges in cross-layer optimization, qLDPC compilation, compiler-decoder co-design, runtime adaptivity, and the development of integrated and benchmarkable FTQC compilation stacks. An actively maintained paper list is available at: github.com/chenghongz/QEC-compiler-design.

quant-pharXiv:2609.17465•Sep 16, 2026•0 citations
Quantum computation promises asymptotic speedups over classical algorithms, but realizing these advantages requires overcoming the noisiness of quantum hardware. Although fault-tolerant error correction can allow for reliable quantum computation even using unreliable components, the resource overheads required can substantially erode the asymptotic performance gains. This dissertation focuses on constructing and optimizing fault-tolerant procedures with lower overhead than previous methods were capable of. We present new frameworks for fault-tolerant syndrome extraction using flag gadgets with exponentially reduced ancilla requirements, explicit measurement schedules that achieve asymptotically fewer measurements than stabilizer generators, and a general method for making arbitrary Clifford circuits fault tolerant. In addition, we optimize surface code measurement schedules in the presence of constraints imposed by fabrication defects to reduce logical error rate. Together, these results advance low-overhead fault tolerance and improve performance in resource-constrained and near-term quantum computing settings.
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.
Quantum error detection (QED) offers a promising pathway to fault tolerance in near-term quantum devices by balancing error suppression with minimal resource overhead. However, its practical utility hinges on optimizing design parameters-such as syndrome measurement frequency-to avoid diminishing returns from detection overhead. In this work, we present a comprehensive framework for fault-tolerant compilation and simulation of quantum algorithms using [[n, n-2, 2]] codes, which enable low-qubit-overhead error detection and a simple nearly fault-tolerant universal set of operations. We demonstrate and analyze our pipeline with a purely statistical interpretation and through the implementation of Grover's search algorithm. Our results are used to answer the question is quantum error detection a worthwhile avenue for early-term fault tolerance, and if so how can we get the most out of it? Simulations under the circuit-level noise model reveal that finding optimal syndrome schedules improves algorithm success probabilities by an average of 6.7x but eventual statistical limits from post-selection in noisy/resource-limited regimes constrain scalability. Furthermore, we propose a simple data-driven approach to predict fault tolerant compilation parameters, such as optimal syndrome schedules, and expected fault tolerant performance gains based on circuit and noise features. These results provide actionable guidelines for implementing QED in early-term quantum experiments and underscore its role as a pragmatic, constant-overhead error mitigation layer for shallow algorithms. To aid in further research, we release all simulation data computed for this work and provide an experimental QED compiler at https://codeqraft.xyz/qed.
In this thesis we examine a variety of techniques for reducing the resources required for fault-tolerant quantum computation. First, we show how to simplify universal encoded computation by using only transversal gates and standard error correction procedures, circumventing existing no-go theorems. We then show how to simplify ancilla preparation, reducing the cost of error correction by more than a factor of four. Using this optimized ancilla preparation, we develop improved techniques for proving rigorous lower bounds on the noise threshold. Additional overhead can be incurred because quantum algorithms must be translated into sequences of gates that are actually available in the quantum computer. In particular, arbitrary single-qubit rotations must be decomposed into a discrete set of fault-tolerant gates. We find that by using a special class of non-deterministic circuits, the cost of decomposition can be reduced by as much as a factor of four over state-of-the-art techniques, which typically use deterministic circuits. Finally, we examine global optimization of fault-tolerant quantum circuits under physical connectivity constraints. We adapt techniques from VLSI in order to minimize time and space usage for computations in the surface code, and we develop a software prototype to demonstrate the potential savings.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
We reduce the extra qubits needed for two fault-tolerant quantum computing protocols: error correction, specifically syndrome bit measurement, and cat state preparation. For distance-three fault-tolerant syndrome extraction, we show an exponential reduction in qubit overhead over the previous best protocol. For a weight- w stabilizer, we demonstrate that stabilizer measurement tolerating one fault needs at most ⌈log2⁡w⌉+1 ancilla qubits. If qubits reset quickly, four ancillas suffice. We also study the preparation of entangled cat states, and prove that the overhead for distance-three fault tolerance is logarithmic in the cat state size. These results apply both to near-term experiments with a few qubits, and to the general study of the asymptotic resource requirements of syndrome measurement and state preparation.With a flag qubits, previous methods use O(a) flag patterns to identify faults. In order to use the same flag qubits more efficiently, we show how to use nearly all 2a possible flag patterns, by constructing maximal-length paths through the a -dimensional hypercube.
Scalable quantum computation is expected to rely on fault-tolerant quantum computation (FTQC), in which quantum error correction (QEC) suppresses physical errors sufficiently to support reliable logical operations. This requires quantum compilation to move beyond general-purpose circuit optimization toward encoding-aware and protocol-structured compilation across the full stack of fault-tolerant quantum computers. Beyond circuit synthesis and hardware mapping, an FTQC compiler must lower algorithm-level operations into the logical gate set supported by the chosen code, coordinate encoded data and ancilla resources, realize logical operations together with repeated syndrome extraction under hardware constraints, and provide the resulting measurement stream to real-time decoding. This survey presents a full-stack view of compiler design for QEC-protected quantum computation. We organize existing work into three interacting layers: logical-level QEC compilation, physical-level QEC realization, and decoder runtime integration. At the logical level, we review surface-code lattice-surgery compilers, beyond-surface-code code-surgery frameworks including emerging qLDPC approaches, and compilation support for non-Clifford operations such as magic-state distillation and code switching. At the physical level, we survey hardware-aware QEC realization on superconducting, trapped-ion, and neutral-atom platforms. We further examine decoder models, real-time decoding systems, and frame-management mechanisms that close the feedback loop during fault-tolerant execution. Finally, we identify open challenges in cross-layer optimization, qLDPC compilation, compiler-decoder co-design, runtime adaptivity, and the development of integrated and benchmarkable FTQC compilation stacks. An actively maintained paper list is available at: github.com/chenghongz/QEC-compiler-design.