Quantum technology promises to be a paradigm shift in the precision, speed, and breadth of application of technology. Recent advances in the fields of quantum computing, quantum networks, and quantum sensing have been rapid, but large-scale utilization is still out of reach. This is largely due to the fragility of the individual quantum systems that this technology seeks to control and manipulate. While small demonstrators have by now shown these novel machines to work in principle, the task in the coming years will be to make them reproducible at scale. Leveraging the advanced semiconductor fabrication technology of today's classical computers, spin qubits in semiconductors such as Si/SiGe or GaAs/AlGaAs are hoped to meet this challenge. In this thesis, I present contributions in four different areas towards this overarching goal. I present an open-source software tool for Fourier-transform noise spectroscopy, improvements and characterization of a Millikelvin confocal microscope, optical measurements of electrostatic exciton traps, and a general filter-function formalism for the description of noisy quantum dynamics. I review the theory of noise spectroscopy based on Welch's method of overlapping periodograms and lay out the design of the hardware-agnostic, open-source python_spectrometer software package that facilitates interactive noise spectroscopy in everyday use. In a didactic fashion, I explore the features and capabilities of the tool and guide the reader through its operation. I then characterize a confocal microscope incorporated in a cryogen-free dilution refrigerator, applying the aforementioned noise spectroscopy tool to evaluate the displacement noise power spectral density of the system. I develop an optical technique based on a knife-edge reflectance contrast to measure the displacement noise reaching a shot-noise floor of 1 nm/√Hz. Using this technique, I determine a displacement noise RMS of 100 nm. I measure the electron temperature of a GaAs/AlGaAs quantum dot in the microscope, finding 76 mK, and demonstrate at hand of a second-order correlation measurement of a self-assembled quantum dot the setup's optical capabilities. In the experimental part of this thesis, I first provide an introduction to photoluminescence and the quantum-confined Stark effect in semiconductor quantum wells, appealing to simple analytical theory to develop an intuition for the relevant effects. I then describe the mjolnir measurement framework developed to conduct optical measurements of electrostatic exciton traps in semiconductor membranes, and present extensive measurements in search of signatures of single-photon emitters. Finally, I develop a comprehensive theoretical formalism for describing and analyzing the noisy dynamics of quantum systems based on filter functions. There, I combine the Magnus and cumulant expansions to derive a quantum-operations formulation of the dynamics under arbitrary classical noise that can be expressed in terms of filter functions capturing the susceptibility of a quantum system in response to noise at a given frequency. I present the filter_functions software package that implements the formalism and demonstrate its efficacy using several examples.
Quantum technology promises to be a paradigm shift in the precision, speed, and breadth of application of technology. Recent advances in the fields of quantum computing, quantum networks, and quantum sensing have been rapid, but large-scale utilization is still out of reach. This is largely due to the fragility of the individual quantum systems that this technology seeks to control and manipulate. While small demonstrators have by now shown these novel machines to work in principle, the task in the coming years will be to make them reproducible at scale. Leveraging the advanced semiconductor fabrication technology of today's classical computers, spin qubits in semiconductors such as Si/SiGe or GaAs/AlGaAs are hoped to meet this challenge. In this thesis, I present contributions in four different areas towards this overarching goal. I present an open-source software tool for Fourier-transform noise spectroscopy, improvements and characterization of a Millikelvin confocal microscope, optical measurements of electrostatic exciton traps, and a general filter-function formalism for the description of noisy quantum dynamics. I review the theory of noise spectroscopy based on Welch's method of overlapping periodograms and lay out the design of the hardware-agnostic, open-source python_spectrometer software package that facilitates interactive noise spectroscopy in everyday use. In a didactic fashion, I explore the features and capabilities of the tool and guide the reader through its operation. I then characterize a confocal microscope incorporated in a cryogen-free dilution refrigerator, applying the aforementioned noise spectroscopy tool to evaluate the displacement noise power spectral density of the system. I develop an optical technique based on a knife-edge reflectance contrast to measure the displacement noise reaching a shot-noise floor of 1 nm/√Hz. Using this technique, I determine a displacement noise RMS of 100 nm. I measure the electron temperature of a GaAs/AlGaAs quantum dot in the microscope, finding 76 mK, and demonstrate at hand of a second-order correlation measurement of a self-assembled quantum dot the setup's optical capabilities. In the experimental part of this thesis, I first provide an introduction to photoluminescence and the quantum-confined Stark effect in semiconductor quantum wells, appealing to simple analytical theory to develop an intuition for the relevant effects. I then describe the mjolnir measurement framework developed to conduct optical measurements of electrostatic exciton traps in semiconductor membranes, and present extensive measurements in search of signatures of single-photon emitters. Finally, I develop a comprehensive theoretical formalism for describing and analyzing the noisy dynamics of quantum systems based on filter functions. There, I combine the Magnus and cumulant expansions to derive a quantum-operations formulation of the dynamics under arbitrary classical noise that can be expressed in terms of filter functions capturing the susceptibility of a quantum system in response to noise at a given frequency. I present the filter_functions software package that implements the formalism and demonstrate its efficacy using several examples.
Quantum spectroscopy utilizes the quantum fluctuations of the light source to characterize and control matter. More specifically, desired many-body states can be directly excited to the semiconductor by adjusting light source's quantum fluctuations. The method is experimentally realizable by projecting an extensive set of classical measurements into a quantum-optical response resulting from any possible quantum source. In this work, quantum spectroscopy is used to identify new classes of many-body states and quantum processes in semiconductor nanostructures. In the first part of this Thesis, the optical properties of semiconductor quantum wells are analyzed with quantum spectroscopy by projecting high-precision optical measurements into quantum-optical responses. It is shown that quantum spectroscopy can characterize the properties of specific stable electron-hole cluster – called quasiparticles – much more sensitively than traditional ultrafast laser spectroscopy. In particular, unambiguous evidence is demonstrated for the identification of a new highly correlated quasiparticle in direct-gap Galliumarsenide quantum wells, the dropleton, that is a quantum droplet consisting of four-to-seven electron-hole pairs. To determine the detectable excitation energetics of such correlated quasiparticles in optically excited semiconductor quantum wells, a new theoretical framework is presented which allows for the computation of the excitation spectrum based on a pair-correlation function formulation of the quasiparticle state. Another study in this Thesis deals with the emission properties of optically pumped quantum-dot microcavities. Experimental and theoretical evidence is shown for a new intriguing quantum-memory effect that is controllable by adjusting pump source's quantum fluctuations. The last part of this Thesis presents a fundamental study about the general applicability of quantum spectroscopy in dissipative systems.
Cryogenic confocal microscopy is a powerful method for studying solid state quantum devices such as single photon sources and optically controlled qubits. While the vast majority of such studies have been conducted at temperatures of a few Kelvin, experiments involving fragile quantum effects often require lower operating temperatures. To also allow for electrical dynamic control, microwave connectivity is required. For polarization-sensitive studies, free space optical access is advantageous compared to fiber coupling. Here we present a confocal microscope in a dilution refrigerator providing all the above features at temperatures below 100 mK. The installed high frequency cabling meets the requirements for state-of-the-art spin qubit experiments. As another unique advantage of our system, the sample fitting inside a large puck can be exchanged while keeping the cryostat cold with minimal realignment. Assessing the performance of the instrument, we demonstrate confocal imaging, sub-nanosecond modulation of the emission wavelength of a suitable sample, and an electron temperature of 76 mK. While the instrument was constructed primarily with the development of optical interfaces to electrically controlled qubits in mind, it can be used for many experiments involving quantum transport, solid state quantum optics, and microwave-optical transducers.
Modern communications technology has encouraged an intimate connection between Semiconductor Physics and Optics, and this connection shows best in the combination of electron-confining structures with light-confining structures. Semiconductor quantum dots are systems engineered to trap electrons in a mesoscopic scale (the are composed of [approximately] 10000 atoms), resulting in a behavior resembling that of atoms, but much richer. Optical microrseonators are engineered to confine light, increasing its intensity and enabling a much stronger interaction with matter. Their combination opens a myriad of new directions, both in fundamental Physics and in possible applications. This dissertation explores both semiconductor quantum dots and microresonators, through experimental work done with semiconductor quantum dots and microsphere resonators spanning the fields of Quantum Optics, Quantum Information and Photonics; from quantum algorithms to polarization converters. Quantum Optics leads the way, allowing us to understand how to manipulate and measure quantum dots with light and to elucidate the interactions between them and microresonators. In the Quantum Information area, we present a detailed study of the feasibility of excitons in quantum dots to perform quantum computations, including an experimental demonstration of the single-qubit Deutsch-Jozsa algorithm performed in a single semiconductor quantum dot. Our studies in Photonics involve applications of microsphere resonators, which we have learned to fabricate and characterize. We present an elaborate description of the experimental techniques needed to study microspheres, including studies and proof of concept experiments on both ultra-sensitive microsphere sensors and whispering gallery mode polarization converters.
This thesis reports the development of a quantum enhanced microparticle tracking technique, which applied to measurements within living cells, allowed the first demonstrations of both biological measurements beyond the quantum noise limit and quantum enhanced spatial resolution within biology. The sensitivity of any optical measurement is limited by noise which follows from quantization of the electromagnetic field. This thesis theoretically characterizes the resulting quantum limit on particle tracking precision; both in the limit of perfect measurements and for the measurements used in real experiments, and theoretically establishes an experimental strategy which could allow the quantum limit to be surpassed via the application of non-classical light. Further, a computational tool is developed which allows rapid characterization of particle tracking experiments, thus providing researchers the benefit of rigorous theoretical predictions without requiring detailed calculations. Following this, classical technologies are developed which can improve microparticle tracking sensitivity and which are enabling steps toward integration of non-classical light. An interferometric strategy is described whereby signal-to-noise is improved by removing unwanted light from the detector. An optical lock-in technique is developed which eliminates low-frequency noise, thus allowing quantum noise limited performance at low frequencies. This is a crucial requirement for quantum enhanced measurements, and can also improve precision in classical experiments. Dark-field illumination is also explored as a method to remove unwanted background light, and the optimal illumination angle is calculated for our intended experiments. These advances are then applied in the development of the first quantum enhanced particle tracking apparatus. Squeezed states of light are used to improve particle tracking precision by 2.7 dB, demonstrating quantum enhanced microscopy for the first time. This was applied to perform the first measurements of living systems with quantum enhanced precision. Naturally occurring lipid particles were tracked within the cytoplasm of Saccharomyces cerevisiae yeast cells, with squeezed light enhancing precision by 2.4 dB. The thermal motion of these particles could then be analyzed to infer the viscosity and elasticity of the local environment, with squeezed light allowing 64% faster observations, thus improving the sensitivity to dynamic biological changes. This experiment was then extended to spatially resolved quantum imaging, with lipid particles used as scanning probes in a technique called photonic force microscopy. The particles sample variations in the local environment with resolution limited by measurement precision rather than the diffraction limit. The use of squeezed light was found to enhance spatial resolution by 14% at an absolute resolution level of 10 nm, comparable to leading classical experiments. This was the first demonstration of both sub-diffraction limited resolution and quantum enhanced resolution in biology, and places practical applications of quantum imaging within reach. Finally, the future challenges and prospects of quantum enhanced particle tracking are outlined.n
Quantum computers promise to be a revolutionary new technology. However, in order to realise this promise many hurdles must first be overcome. In this thesis we investigate two such hurdles: the presence of noise in quantum computers and limitations on the connectivity and control in large scale quantum computing architectures.In order to combat noise in quantum devices we must first characterize this noise. To do this several diagnostic tools have been developed over the last two decades. The current industry standard for such a diagnostic tool is called randomized benchmarking. Randomized benchmarking doesn't give a full characterization of the noise afflicting the quantum device but rather attempts to give some indication of of the device's average behavior, captured in a quantity called the average fidelity. Because it does not endeavor to characterize every small detail of the noise it can be efficiently applied even to very large quantum devices. However, with this power also comes increased complexity. Randomized benchmarking has a lot of moving parts, and some fairly strong assumptions must be made in order to guarantee its correctness. In this thesis we attempt to justify these assumptions and if possible remove or weaken them, making randomized benchmarking a more robust and general tool. In chapter 6 of this thesis we investigate the finite statistics of randomized benchmarking. We prove strong bounds on the number of samples needed to perform rigorous randomized benchmarking. To do this we make use tools from representation theory. In particular we use a characterization of certain representations of the Clifford group, which we develop in chapter 5. In chapter 7 we re-use these tools to also bound the number of samples needed to perform rigorous unitarity randomized benchmarking, a newer variant of randomized benchmarking quickly gaining in popularity. These results retroactively justify the use of randomized benchmarking in an experimental setting and also provide guidance on optimal statistical practices in the context of randomized benchmarking. In chapter 8 we expand upon the standard randomized benchmarking protocol and formulate a new class of protocols which we call character randomized benchmarking. This new class of protocols removes a critical assumption made in standard randomized benchmarking, making character randomized benchmarking vastly more generally applicable. To show the advantages of character randomized benchmarking we implement it in an experiment characterizing the noise in a Si/SiGe quantum dot device. This experiment is detailed in chapter 9. Finally we deal with the second main topic of this thesis in chapter 10. Large scale quantum computer will, like classical computers, face limitations in the connectivity between different parts of the computer. This is due to a fundamental law in computer design called Rent's rule, which states that the number of wires connecting a (quantum) computer chip to the outside world is much smaller than the number of components in that chip. This means the individual components of the chip can not be controlled individually in parallel. Given that parallelism is absolutely critical for the functioning of quantum computers this is a serious problem for the development of large scale quantum computers. Luckily it is possible to organize quantum computing devices in such a way that they can be controlled using a relatively small amount of input wires. One example of such an organization is called a crossbar architecture. Recently a proposal was made for a crossbar architecture quantum computer in quantum dots, and in chapter 10 of this thesis we investigate in detail the advantages and disadvantages of such an architecture. We focus in particular on its effect on standard quantum error correction procedures, a key part of a functioning quantum computer, and one where parallel control of all parts of the quantum device is essential.
The electromagnetic manipulation of isolated ions has led to many advances in atomic physics, from laser cooling to precision metrology and quantum control. As technical capability in this area has grown, so has interest in building miniature electromagnetic traps for the development of large-scale quantum information processors. This thesis will primarily focus on using microfabrication techniques to build arrays of miniature ion traps, similar to techniques used in fabricating high component density microprocessors. A specific focus will be on research using a gallium arsenide/aluminum gallium arsenide heterostructure as a trap architecture, as well as the recent testing of different ion traps fabricated at outside foundries. The construction and characterization of a conventional ceramic trap capable of shuttling an ion through a junction will also be detailed, and reveal the need for moving towards lithographically fabricated traps. Combined, these serve as a set of proof-of-principle experiments pointing to methods for designing and building large scale arrays of ion traps capable of constituting a quantum information processor. As traps become smaller, electrical potentials on the electrodes have greater influence on the ion. This not only pertains to intentionally applied voltages, but also to deleterious noise sources, such as thermal Johnson noise and the more significant ``patch potential" noise, which both cause motional heating of the ion. These problematic noise sources dovetail with my thesis research into trap miniaturization since their effects become more pronounced and impossible to ignore for small trap sizes. Therefore characterizing them and investigating ways to suppress them have become an important component of my research. I will describe an experiment using a pair of movable needle electrodes to measure the ion heating rate corresponding to the harmonic frequency of the trap, the ion-electrode distance, and the electrode temperature. This information is used for characterizing the fluctuating potentials and exploring the possibility of suppressing motional heating by cooling the trap electrodes. This source of noise is also observed in other systems, and its characterization could potentially improve other precision experiments, such as those measuring deviations in the gravitational inverse square law with proximate masses.