Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

SPIE Three-Dimensional Imaging, Visualization, and Display

Two-dimensional quantum imaging from a single photon detector over kilometre-scale fibre

Zhizhong Yan, Armanpreet Pannu, Amr S. Helmy

Published Jun 11, 2026• 0 citations
Publisher

Abstract

Quantum imaging protocols have traditionally relied on spatially resolving detector arrays or multi-pixel cameras whose noise floors, limited detection efficiencies, and timing jitter fundamentally constrain image quality. Here we report a fibre-integrated architecture that reconstructs full two-dimensional quantum images using only a single superconducting nanowire single-photon detector, replacing spatial resolution with temporal multiplexing and compressive measurement. Correlated photon pairs generated by parametric down-conversion illuminate the target through one arm while the partner photon is retained as a temporal reference; non-local dispersion engineered across the two arms suppresses uncorrelated background while preserving pair timing. A compressive sensing algorithm exploiting sparsity in the Fourier domain then recovers 50×50-pixel images from far fewer measurements than conventional raster scanning would require. Operating over several kilometres of standard single-mode fibre at the eye-safe wavelength of 1550 nm, the system produces images of comparable fidelity to classical illumination while using 95 dB less optical power, achieves sub-shot-noise performance with a 7.9 dB signal-to-noise ratio improvement, and sustains useful image quality under injected noise exceeding the signal by 10 dB. The same temporal correlation data yield a timing precision of 1.2 ps, corresponding to sub-millimetre ranging resolution. These results establish single-detector temporal multiplexing as a viable and scalable route to practical quantum imaging over deployed telecommunications infrastructure.

DOI
10.1117/12.3094213

Related papers

Superconducting nanowire single-photon imager

Qingyuan Zhao, Francesco Bellei, Di Zhu +6 more

Detecting spatial and temporal information of individual photons is a crucial technology in today's quantum information science. Among the existing single-photon detectors, superconducting nanowire single-photon detectors (SNSPDs) have been demonstrated with a sub-50 ps timing jitter, near unity detection efficiency1, wide response spectrum from visible to infrared and ~10 ns reset time. However, to gain spatial sensitivity, multiple SNSPDs have to be integrated into an array, whose spatial and temporal resolutions are limited by the multiplexing circuit. Here, we add spatial sensitivity to a single nanowire while preserving the temporal resolution from an SNSPD, thereby turning an SNSPD into a superconducting nanowire single-photon imager (SNSPI). To achieve an SNSPI, we modify a nanowire's electrical behavior from a lumped inductor to a transmission line, where the signal velocity is slowed down to 0.02c (where c is the speed of light). Consequently, we are able to simultaneously read out the landing locations and arrival times of the photons from the output electrical pulses using only two connections. We have demonstrated single-photon imaging by using a 19.7 mm long SNSPI, which is meandered into an imaging area of 286 {\mu}m*193 {\mu}m. The nanowire has a temporal resolution of 50 ps for detecting 1.5 {\mu}m photons. The 2D spatial resolution is 13.0 {\mu}m in the vertical direction and 5.6 {\mu}m in the horizontal direction. The maximum number of resolvable locations (i.e., the effective number of pixels) in such a long nanowire is calculated to be 590. Rather than operating an individual detector in a scanning mode or using SPD arrays, this SNSPI gives an alternative approach to taking large-scale single-photon images and measuring temporal and spatial correlation.

•May 27, 2016•0 citations

Scalable implementation of a superconducting nanowire single-photon detector array with a superconducting digital signal processor

Masahiro Yabuno, Shigeyuki Miyajima, Shigehito Miki +1 more

A two-dimensional single-photon imaging system with high sensitivity and high time resolution is the ultimate camera and useful in a wide range of fields. A superconducting nanowire single-photon detector (SSPD or SNSPD) is one of the best candidates for realizing such an ultimate camera due to its high detection efficiency in a wide spectral range, low dark count rate without after-pulsing, and excellent time resolution. Here we propose a new readout scheme to realize a large-scale imaging array based on SSPD, where a row-column readout architecture is combined with a digital signal processor based on a single-flux-quantum (SFQ) circuit. A 16-pixel row-column readout SSPD array is fabricated and measured with an SFQ digital signal processor. We successfully acquired spatial information as encoded digital bit codes with the temporal information of the photon detection. The system timing jitter was measured as <80 ps for all 16 pixels even through the SFQ signal processor, indicating the potential for an imaging array with an extremely high time resolution.

Optics Express•Apr 1, 2020•40 citations

Efficient High-Dimensional Entanglement Imaging with a Compressive-Sensing Double-Pixel Camera

Gregory A. Howland, John C. Howell

We implement a double-pixel compressive-sensing camera to efficiently characterize, at high resolution, the spatially entangled fields that are produced by spontaneous parametric down-conversion.This technique leverages sparsity in spatial correlations between entangled photons to improve acquisition times over raster scanning by a scaling factor up to n 2 = logðnÞ for n-dimensional images.We image at resolutions up to 1024 dimensions per detector and demonstrate a channel capacity of 8.4 bits per photon.By comparing the entangled photons' classical mutual information in conjugate bases, we violate an entropic Einstein-Podolsky-Rosen separability criterion for all measured resolutions.More broadly, our result indicates that compressive sensing can be especially effective for higher-order measurements on correlated systems.

arXiv:1212.5530•Physical Review X•Feb 20, 2013•70 citations

Superconducting nanowire single-photon detector array with pixel-level photon-number resolution

Chenrui Wang, Chaomeng Ding, Jingxue Chen +6 more

We report a 16-pixel (4×4) superconducting nanowire single-photon detector (SNSPD) array featuring pixel-level photon-number-resolving capability. This multidimensional sensing is enabled by integrating a compact four-element series nanowire architecture into each spatial pixel, allowing direct discrimination of one to four photons. Under single-mode fiber illumination, the device achieves a total system detection efficiency of 41.5%, given the array geometrical fill factor of 53%. Across all channels, the device exhibits reliable multiphoton discrimination, maintaining minimum readout fidelities of 96%, 89%, 73%, and 77% for one- to four-photon states, respectively. Furthermore, independent channel evaluations reveal low timing jitter and negligible inter-channel crosstalk (<0.1 % ). By implementing differentiating pulse shaping for high-flux operation, a maximum single-channel −3 dB count rate of 984 MHz is achieved, establishing an aggregated array bandwidth potential of 8.9 GHz. This sensing architecture may provide a viable pathway toward high-flux single-photon imaging, offering potential applications in quantum optics and light detection and ranging (LiDAR) systems.

Photonics Research•Aug 28, 2026•0 citations

Noise-tolerant single-photon imaging with a superconducting nanowire camera

Ling-Dong Kong, Qingyuan Zhao, Kai Zheng +12 more

The quality of an image is limited to the signal-to-noise ratio of the output from sensors. As the background noise increases much more than the signal, which can be caused by either a huge attenuation of light pulses after a long-haul transmission or a blinding attack with a strong flood illumination, an imaging system stops working properly. Here we built a superconducting single-photon infrared camera of negligible dark counts and 60 ps timing resolution. Combining with an adaptive 3D slicing algorithm that gives each pixel an optimal temporal window to distinguish clustered signal photons from a uniformly distributed background, we successfully reconstructed 3D single-photon images at both a low signal level (∼1 average photon per pixel) and extremely high noise background (background-to-signal ratio = 200 within a period of 50 ns before denoising). Among all detection events, we were able to remove 99.45% of the noise photons while keeping the signal photon loss at 0.74%. This Letter is a direct outcome of quantum-inspired imaging that asks for a co-development of sensors and computational methods. We envision that the proposed methods can increase the working distance of a long-haul imaging system or defend it from blinding attacks.

Optics Letters•Nov 4, 2020•13 citations

Quantum imaging with a photon counting camera

Osian Wolley, Thomas Gregory, Sebastian M. J. Beer +2 more

Classical light sources emit a randomly-timed stream of individual photons, the spatial distribution of which can be detected with a camera to form an image. Quantum light sources, based on parametric down conversion, emit photons as correlated photon-pairs. The spatial correlations between the photons enables imaging systems where the preferential selection of photon-pairs allows for enhancements in the noise performance over what is possible using classical light sources. However, until now the technical challenge of measuring, and correlating both photons has led to system complexity. Here we show that a camera capable of resolving the number of individual photons in each pixel of the detector array can be used to record an image formed from these photon-pair events and hence achieve a greater contrast than possible using a classical light source. We achieve an enhancement in the ratio of two-photon events compared to one-photon events using spatially correlated SPDC light compared to uncorrelated illumination by a LED. These results indicate the potential advantages of using photon counting cameras in quantum imaging schemes and these advantages will further increase as the technology is developed. Operating in photon sparse regimes such systems have potential applications in low-light microscopy and covert imaging.

Scientific Reports•May 18, 2022•49 citations
Quantum imaging protocols have traditionally relied on spatially resolving detector arrays or multi-pixel cameras whose noise floors, limited detection efficiencies, and timing jitter fundamentally constrain image quality. Here we report a fibre-integrated architecture that reconstructs full two-dimensional quantum images using only a single superconducting nanowire single-photon detector, replacing spatial resolution with temporal multiplexing and compressive measurement. Correlated photon pairs generated by parametric down-conversion illuminate the target through one arm while the partner photon is retained as a temporal reference; non-local dispersion engineered across the two arms suppresses uncorrelated background while preserving pair timing. A compressive sensing algorithm exploiting sparsity in the Fourier domain then recovers 50×50-pixel images from far fewer measurements than conventional raster scanning would require. Operating over several kilometres of standard single-mode fibre at the eye-safe wavelength of 1550 nm, the system produces images of comparable fidelity to classical illumination while using 95 dB less optical power, achieves sub-shot-noise performance with a 7.9 dB signal-to-noise ratio improvement, and sustains useful image quality under injected noise exceeding the signal by 10 dB. The same temporal correlation data yield a timing precision of 1.2 ps, corresponding to sub-millimetre ranging resolution. These results establish single-detector temporal multiplexing as a viable and scalable route to practical quantum imaging over deployed telecommunications infrastructure.
Detecting spatial and temporal information of individual photons is a crucial technology in today's quantum information science. Among the existing single-photon detectors, superconducting nanowire single-photon detectors (SNSPDs) have been demonstrated with a sub-50 ps timing jitter, near unity detection efficiency1, wide response spectrum from visible to infrared and ~10 ns reset time. However, to gain spatial sensitivity, multiple SNSPDs have to be integrated into an array, whose spatial and temporal resolutions are limited by the multiplexing circuit. Here, we add spatial sensitivity to a single nanowire while preserving the temporal resolution from an SNSPD, thereby turning an SNSPD into a superconducting nanowire single-photon imager (SNSPI). To achieve an SNSPI, we modify a nanowire's electrical behavior from a lumped inductor to a transmission line, where the signal velocity is slowed down to 0.02c (where c is the speed of light). Consequently, we are able to simultaneously read out the landing locations and arrival times of the photons from the output electrical pulses using only two connections. We have demonstrated single-photon imaging by using a 19.7 mm long SNSPI, which is meandered into an imaging area of 286 {\mu}m*193 {\mu}m. The nanowire has a temporal resolution of 50 ps for detecting 1.5 {\mu}m photons. The 2D spatial resolution is 13.0 {\mu}m in the vertical direction and 5.6 {\mu}m in the horizontal direction. The maximum number of resolvable locations (i.e., the effective number of pixels) in such a long nanowire is calculated to be 590. Rather than operating an individual detector in a scanning mode or using SPD arrays, this SNSPI gives an alternative approach to taking large-scale single-photon images and measuring temporal and spatial correlation.
A two-dimensional single-photon imaging system with high sensitivity and high time resolution is the ultimate camera and useful in a wide range of fields. A superconducting nanowire single-photon detector (SSPD or SNSPD) is one of the best candidates for realizing such an ultimate camera due to its high detection efficiency in a wide spectral range, low dark count rate without after-pulsing, and excellent time resolution. Here we propose a new readout scheme to realize a large-scale imaging array based on SSPD, where a row-column readout architecture is combined with a digital signal processor based on a single-flux-quantum (SFQ) circuit. A 16-pixel row-column readout SSPD array is fabricated and measured with an SFQ digital signal processor. We successfully acquired spatial information as encoded digital bit codes with the temporal information of the photon detection. The system timing jitter was measured as <80 ps for all 16 pixels even through the SFQ signal processor, indicating the potential for an imaging array with an extremely high time resolution.
We implement a double-pixel compressive-sensing camera to efficiently characterize, at high resolution, the spatially entangled fields that are produced by spontaneous parametric down-conversion.This technique leverages sparsity in spatial correlations between entangled photons to improve acquisition times over raster scanning by a scaling factor up to n 2 = logðnÞ for n-dimensional images.We image at resolutions up to 1024 dimensions per detector and demonstrate a channel capacity of 8.4 bits per photon.By comparing the entangled photons' classical mutual information in conjugate bases, we violate an entropic Einstein-Podolsky-Rosen separability criterion for all measured resolutions.More broadly, our result indicates that compressive sensing can be especially effective for higher-order measurements on correlated systems.
We report a 16-pixel (4×4) superconducting nanowire single-photon detector (SNSPD) array featuring pixel-level photon-number-resolving capability. This multidimensional sensing is enabled by integrating a compact four-element series nanowire architecture into each spatial pixel, allowing direct discrimination of one to four photons. Under single-mode fiber illumination, the device achieves a total system detection efficiency of 41.5%, given the array geometrical fill factor of 53%. Across all channels, the device exhibits reliable multiphoton discrimination, maintaining minimum readout fidelities of 96%, 89%, 73%, and 77% for one- to four-photon states, respectively. Furthermore, independent channel evaluations reveal low timing jitter and negligible inter-channel crosstalk (<0.1 % ). By implementing differentiating pulse shaping for high-flux operation, a maximum single-channel −3 dB count rate of 984 MHz is achieved, establishing an aggregated array bandwidth potential of 8.9 GHz. This sensing architecture may provide a viable pathway toward high-flux single-photon imaging, offering potential applications in quantum optics and light detection and ranging (LiDAR) systems.
The quality of an image is limited to the signal-to-noise ratio of the output from sensors. As the background noise increases much more than the signal, which can be caused by either a huge attenuation of light pulses after a long-haul transmission or a blinding attack with a strong flood illumination, an imaging system stops working properly. Here we built a superconducting single-photon infrared camera of negligible dark counts and 60 ps timing resolution. Combining with an adaptive 3D slicing algorithm that gives each pixel an optimal temporal window to distinguish clustered signal photons from a uniformly distributed background, we successfully reconstructed 3D single-photon images at both a low signal level (∼1 average photon per pixel) and extremely high noise background (background-to-signal ratio = 200 within a period of 50 ns before denoising). Among all detection events, we were able to remove 99.45% of the noise photons while keeping the signal photon loss at 0.74%. This Letter is a direct outcome of quantum-inspired imaging that asks for a co-development of sensors and computational methods. We envision that the proposed methods can increase the working distance of a long-haul imaging system or defend it from blinding attacks.
Classical light sources emit a randomly-timed stream of individual photons, the spatial distribution of which can be detected with a camera to form an image. Quantum light sources, based on parametric down conversion, emit photons as correlated photon-pairs. The spatial correlations between the photons enables imaging systems where the preferential selection of photon-pairs allows for enhancements in the noise performance over what is possible using classical light sources. However, until now the technical challenge of measuring, and correlating both photons has led to system complexity. Here we show that a camera capable of resolving the number of individual photons in each pixel of the detector array can be used to record an image formed from these photon-pair events and hence achieve a greater contrast than possible using a classical light source. We achieve an enhancement in the ratio of two-photon events compared to one-photon events using spatially correlated SPDC light compared to uncorrelated illumination by a LED. These results indicate the potential advantages of using photon counting cameras in quantum imaging schemes and these advantages will further increase as the technology is developed. Operating in photon sparse regimes such systems have potential applications in low-light microscopy and covert imaging.