Quantum computers hold a promise to solve certain problems that are intractable to classical computers, offering a paradigm shift in fields ranging from cryptography to materials science. However, realizing this potential requires overcoming the challenge of scalability, which encompasses both spatial scalability – the capacity for large qubit registers, and temporal scalability – the capability to execute deep quantum circuits. This thesis describes the construction and experimental characterization of a new rubidium atom array quantum platform, which advances the scalability frontier of atomic quantum processors in both spatial and temporal domains. The platform achieves a record-scale ∼ 99%-filling-fraction array with more than 3,000 qubits, and is shown to operate continuously for more than 2 hours. These advances are enabled by a novel architecture that supports high-flux refilling of atomic qubits without decohering neighboring sites. Combined with other recent progress demonstrated in the field of neutral atom quantum information processing, this platform provides a viable pathway toward large-scale, fault-tolerant quantum processing capable of executing deep error-corrected circuits.
Quantum computers hold a promise to solve certain problems that are intractable to classical computers, offering a paradigm shift in fields ranging from cryptography to materials science. However, realizing this potential requires overcoming the challenge of scalability, which encompasses both spatial scalability – the capacity for large qubit registers, and temporal scalability – the capability to execute deep quantum circuits. This thesis describes the construction and experimental characterization of a new rubidium atom array quantum platform, which advances the scalability frontier of atomic quantum processors in both spatial and temporal domains. The platform achieves a record-scale ∼ 99%-filling-fraction array with more than 3,000 qubits, and is shown to operate continuously for more than 2 hours. These advances are enabled by a novel architecture that supports high-flux refilling of atomic qubits without decohering neighboring sites. Combined with other recent progress demonstrated in the field of neutral atom quantum information processing, this platform provides a viable pathway toward large-scale, fault-tolerant quantum processing capable of executing deep error-corrected circuits.
Neutral atom arrays have emerged as a leading platform for scalable quantum information processing, offering reconfigurable geometry, strong interactions, and high-fidelity control. While encoding quantum information in atomic qubits provides multiple natural advantages, information can be lost through mechanisms such as atom loss, depolarization, and decoherence, necessitating the need for quantum error correction. However, the processes underlying error correction, including measurement and gate operations, can themselves induce atom loss, ultimately limiting the achievable computational circuit depth. This thesis presents the design and realization of a large-scale neutral atom array quantum architecture capable of continuous coherent operation. By replenishing fresh atomic qubits during operation, the system solves a key bottleneck to scalability in space and time. We further show that, through careful system design, quantum coherence can be preserved while introducing new atoms and initializing them as qubits. We discuss the architectural and physical considerations underlying this approach and demonstrate a platform comprising more than 3,000 reconfigurable qubits. These results establish a pathway toward persistent quantum operation and have broad implications for quantum computing, quantum simulation, and quantum metrology.
Quantum computers open new scientific avenues, from exploring complex quantum mechanical systems to new computational paradigms, but face the fundamental challenge of decoherence. Remarkably, decoherence can be prevented by creating highly entangled states of physical qubits that encode an error-corrected “logical” qubit. This thesis will describe the development of quantum computing with reconfigurable arrays of neutral atoms and their use for quantum processing with logical qubits. Quantum processing in this approach is based on the coherent transport of atoms shuttled by optical tweezers, enabling any-to-any connectivity, high-fidelity programmable logic, and mid-circuit processing within a zoned architecture. Logical qubit processing is greatly facilitated by parallel control and transversal operations, and is used for experiments ranging from entangling logical qubits to their use for precise simulation of quantum scrambling. Core physical mechanisms for achieving deep-circuit, universal algorithms with logical qubits are identified, and these are leveraged into new techniques that greatly reduce overheads for large-scale computation. Finally, applications of quantum processors will be explored via analog and gate-based quantum simulations. These results, alongside other recent advances, herald a transition to error-corrected quantum processing, establishing foundations that can enable future large-scale quantum computers and their useful applications.
Quantum processors have the potential to significantly advance our understanding of quantum systems. In particular, the programmability of digital quantum devices enables access to highly tunable quantum dynamics and observables. The central challenge, however, is suppressing errors, making quantum error correction essential for large-scale algorithms. In this thesis, I present work on quantum processing with reconfigurable atom arrays, with experiments featuring up to 448 neutral atom qubits, high two-qubit gate fidelities, arbitrary connectivity, and mid-circuit qubit readout and reuse. Using this system, I describe how we realize gate-based quantum simulations. In particular, we experimentally study Kitaev’s honeycomb model and explore hardware-efficient fermion-to-qubit encodings. We then leverage unique opportunities with atoms to study the key building blocks of scalable quantum error correction. These include below-threshold performance, deep computation at constant entropy, and universal logical gates. Together, these experiments highlight unique near-term opportunities with atom arrays and chart a path toward future large-scale atomic processors.
Neutral-atom arrays are a leading platform for quantum technologies, offering a promising route toward large-scale, fault-tolerant quantum computing. We propose a novel quantum processing architecture based on dual-type, dual-element atom arrays, where individually trapped atoms serve as data qubits, and small atomic ensembles enable ancillary operations. By leveraging the selective initialization, coherent control, and collective optical response of atomic ensembles, we demonstrate ensemble-assisted quantum operations that enable reconfigurable, high-speed control of individual data qubits and rapid mid-circuit readout, including both projective single-qubit and joint multi-qubit measurements. The hybrid approach of this architecture combines the long coherence times of single-atom qubits with the enhanced controllability of atomic ensembles, achieving high-fidelity state manipulation and detection with minimal crosstalk. Numerical simulations indicate that our scheme supports individually addressable single- and multi-qubit operations with fidelities of 99.5% and 99.9%, respectively, as well as fast single- and multi-qubit state readout with fidelities exceeding 99% within tens of microseconds. These capabilities open new pathways toward scalable, fault-tolerant quantum computation, enabling repetitive error syndrome detection and efficient generation of long-range entangled many-body states, thereby expanding the quantum information toolbox beyond existing platforms.
State-of-the-art quantum computers are not yet capable of executing large-scale fault-tolerant quantum algorithms. However, experiments in recent years have demonstrated remarkable noisy intermediate-scale and early fault-tolerant quantum computations. To use the existing yet limited hardware most effectively, these protocols are typically tailored to a specific device or hardware platform that comes with certain capabilities but also with individual limitations. This thesis studies quantum protocols suited for near-term atomic quantum processors, i.e., neutral atoms in optical tweezer arrays and trapped ions. One challenge these two platforms have in common is the difficulty of performing mid-circuit measurements. On the other hand, both platforms offer advantages in qubit connectivity and scalability, both of which can be achieved by shuttling atoms or ions. Furthermore, neutral-atom and trapped-ion setups provide native support for multiqubit gates. The protocols explored in this thesis focus on quantum error correction, but also touch on quantum simulation. Concretely, we first investigate quantum autoencoders as a tool for measurement-free quantum error correction in a quantum memory. We propose an experimental implementation of this quantum machine-learning model on a shuttling-based trapped-ion quantum processor to demonstrate that quantum autoencoders can independently identify optimal strategies that combat hardware-specific noise. Secondly, we develop a software toolbox to optimize two- and multiqubit Rydberg gates utilized in neutral-atom quantum processors. We show that multiqubit gates can be useful for achieving good performance and efficient implementations of Floquet and measurement-free fault-tolerant quantum error correction with neutral atoms. Thirdly, we study the feasibility of neutral atoms as a platform for bosonic quantum error correction. We devise blueprints for encoding Gottesman-Kitaev-Preskill qubits in selected motional modes of neutral atoms confined in optical dipole traps and compare the suitability of optical tweezers and optical lattices for this purpose. Finally, we investigate a novel dissipative variational quantum eigen solver that enables the study of ground-state properties of the pure Z-2 lattice gauge theory. We demonstrate that the scheme outperforms established unitary approaches in the presence of circuit-level noise and can be implemented in available neutral-atom quantum processors. Overall, the schemes developed in this work could serve as building blocks for executing elaborate protocols on state-of-the-art atomic quantum processors. Therefore, the results of this thesis contribute to bridging the gap between the theoretical development of protocols for quantum error correction or quantum simulation and their experimental realization.
Quantum computation has emerged as a prominent research field with the potential to revolutionize information processing. Recent advancements have focused on extending qubit coherence times and enhancing error correction and fault-tolerant protocols, achieving coherence time to gate time ratios as high as 10⁸ and reducing error rates to as low as 0.143% ± 0.003% per cycle for 101 qubit system. The next critical challenge lies in scaling up qubit systems to support large-scale quantum computation that exceeds the performance of classical supercomputer. In this study, we summarize the working mechanisms, physical properties, gate operations, and limitations of three leading qubit platforms—superconducting qubits, trapped-ion qubits, and neutral atom qubits. Through a systematic comparison, we identify the key challenges that hinder qubit system scalability. Finally, we outline future research directions to address these challenges, including exploring the fundamental physics underpinning long coherence times, improving control tools such as laser systems, enhancing material quality and fabrication precision, and investigating hybrid quantum architectures. We hope this study offers a valuable perspective for researchers working toward the development of scalable and reliable quantum computing systems.