We study two hybridization algorithms that are used for combining a quantum inertial sensor based on atom interferometry with a classical inertial sensor for onboard acceleration measurements. The first is based on the direct extraction of the interferometer phase and has previously been used in seaborne and airborne gravity-measurement campaigns. The second relies on the combination of three consecutive measurements and was originally developed to increase the measurement range of the quantum sensor beyond its linear regime. After comparing their performances using synthetic data, we implement them on acceleration data collected in a recent airborne campaign and evaluate the bias and scale-factor error of the classical sensor. We, then, extend their scope to the dynamical evaluation of other key measurement parameters (e.g., alignment errors). We demonstrate an improvement in the correlation between the measurements of the two accelerometers, and we observe a significant reduction in the error in the estimation of the bias of the classical sensor.
We study two hybridization algorithms that are used for combining a quantum inertial sensor based on atom interferometry with a classical inertial sensor for onboard acceleration measurements. The first is based on the direct extraction of the interferometer phase and has previously been used in seaborne and airborne gravity-measurement campaigns. The second relies on the combination of three consecutive measurements and was originally developed to increase the measurement range of the quantum sensor beyond its linear regime. After comparing their performances using synthetic data, we implement them on acceleration data collected in a recent airborne campaign and evaluate the bias and scale-factor error of the classical sensor. We, then, extend their scope to the dynamical evaluation of other key measurement parameters (e.g., alignment errors). We demonstrate an improvement in the correlation between the measurements of the two accelerometers, and we observe a significant reduction in the error in the estimation of the bias of the classical sensor.
Robust and accurate acceleration tracking remains a challenge in many fields. For geophysics and economic geology, precise gravity mapping requires onboard sensors combined with accurate positioning and navigation systems. Cold atom–based quantum inertial sensors can potentially provide these high-precision instruments. However, current scalar instruments require precise alignment with vector quantities. Here, we present the first hybrid three-axis accelerometer exploiting the quantum advantage to measure the full acceleration vector by combining three orthogonal atom interferometer measurements with a classical navigation-grade accelerometer triad. Its ultralow bias permits tracking the acceleration vector over long time scales, yielding a 50-fold improvement in stability (6 × 10 −8 g ) over our classical accelerometers. We record the acceleration vector at a high data rate (1 kHz), with absolute magnitude accuracy below 10 μ g , and pointing accuracy of 4 μrad. This paves the way toward future strapdown applications with quantum sensors and highlights their potential as future inertial navigation units.
Inertial navigation is an essential technology for space applications due to its autonomy from external signals and references. In space, inertial navigation systems utilize accelerometers and gyroscopes to measure changes in velocity and orientation, enabling a spacecraft to determine its trajectory independently, assuming the gravitational accelerations are well known. While conventional accelerometers onboard space missions often suffer from a large drift in the frequency range below 10–3Hz, quantum accelerometers can provide highly stable and drift-free measurements of non-gravitational acceleration and consequently improve the spacecraft orbits. This work evaluates the performance of a 3-axis quantum accelerometer for space navigation. In this paper, we analyze the performance of such sensors onboard a spacecraft in a parking orbit around Earth in two scenarios of maintaining a nadir-looking orientation and having an inertially fixed spacecraft. To achieve this goal, we simulate a spacecraft in the low Earth orbit using gravitational and non-gravitational accelerations, and we develop an in-orbit performance model for Mach- Zehnder-type quantum accelerometers capable of calculating the detection noise, quantum projection noise, laser frequency noise, wavefront aberration bias, and contrast loss, together with external effects such as the impact of rotation, and gravity gradient for each individual measurement. Using this modeling and based on the propagated orbit, we simulate the measurements of a 3-axis quantum accelerometer along the orbit in two different scenarios: first, we assume the spacecraft to maintain a nadir-pointing orientation, and then we consider another scenario in which the spacecraft is assumed to be inertially- fixed. The results demonstrate that the nadir-pointing orientation introduces more noise, particularly in the along-track and radial directions, due to uncompensated rotation. However, in both the nadir-pointing and inertially fixed scenarios, quantum sensors still produce white noise, consistent with their drift-free measurement capabilities. Furthermore, the findings emphasize the critical role of sensor placement within the spacecraft. Positioning the quantum accelerometer along the main axis of rotation is optimal, as it reduces the impact of centrifugal forces and improves measurement accuracy. This is especially important for spacecraft in nadir-pointing orientations or during maneuvers. This research is the simulation and implementation of a low-Earth orbit, undertaken as a proof-of-concept. In the future, we implement this modeling for a trajectory from Earth to the Moon. We discuss the challenges, limitations, and potential solutions.
Accurate and stable measurement of inertial quantities is essential in geophysics, geodesy, fundamental physics, and inertial navigation. Here, we present an architecture for a compact cold-atom accelerometer-gyroscope based on a magnetically launched atom interferometer. Characterizing the launching technique, we demonstrate 700–parts per million gyroscope scale factor stability over 1 day, while acceleration and rotation rate bias stabilities of 7 × 10 −7 meters per second squared and 4 × 10 −7 radians per second are reached after 2 days of integration of the cold-atom sensor. Hybridizing it with a classical accelerometer and gyroscope, we correct their drift and bias to achieve respective 100-fold and 3-fold increase on the stability of the hybridized sensor compared to the classical ones. Compared to a state-of-the-art atomic gyroscope, the simplicity and scalability of our launching technique make this architecture easily extendable to a compact full six-axis inertial measurement unit, providing a pathway toward autonomous positioning and orientation using cold-atom sensors.
Hybrid quantum inertial sensing is a strategy combining the absolute but slow measurement of acceleration possible with atom interferometry and the relative but fast measurement of classical inertial measurement units (IMU). By combining both technologies within a sensor fusion framework, their respective strengths can be exploited, paving the way to enable high performance inertial navigation for different application scenarios. This paper gives an overview of our design activities of a three axes hybrid quantum inertial sensor and a planned flight campaign including hyper- and micro-gravity on the Bremen GraviTower. Furthermore, our design efforts for a next generation sensor system, foreseen to be operated in space are described.
We demonstrate a hybrid accelerometer that benefits from the advantages of both conventional and atomic sensors in terms of bandwidth (DC to 430 Hz) and long term stability. First, the use of a real time correction of the atom interferometer phase by the signal from the classical accelerometer enables to run it at best performance without any isolation platform. Second, a servo-lock of the DC component of the conventional sensor output signal by the atomic one realizes a hybrid sensor. This method paves the way for applications in geophysics and in inertial navigation as it overcomes the main limitation of atomic accelerometers, namely, the dead times between consecutive measurements.
In this paper we present our progress towards the development of a complete cold-atom Inertial Measurement Unit (IMU). Our goal is to have a single atomic sensor that will alternatively measure each inertial component (3 accelerations and 3 rotations). Every atomic measurement will be hybridized with a set of classical inertial sensors. Hybridization enables to combine the advantages of both technologies and to provide accurate continuous measurements with high dynamic range, in the scope of onboard inertial navigation compatibility.