Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Role of CMOS Control Electronics in Quantum Computing Systems

Ayush Gupta

Published Jun 7, 2026• 0 citations
Publisher

Abstract

Quantum computing has emerged as a promising computational paradigm capable of solving certain problems beyond the practical capabilities of classical computers. Although quantum processors rely on quantum mechanical phenomena such as superposition and entanglement but their operation depends heavily on classical electronic systems for control, communication, and measurement. Complementary Metal Oxide Semiconductor (CMOS) technology plays a critical role in providing this electronic infrastructure due to its low power consumption, scalability, and high integration density. This paper explores the role of CMOS-based control electronics in superconducting quantum computing systems and the functions of key components including Arbitrary Waveform Generators (AWGs), Digital-to-Analog Converters (DACs), mixers, transmission lines, resonators, and readout circuits. The paper also examines the emerging field of Cryogenic CMOS (Cryo-CMOS), which aims to improve scalability and reduce latency in future quantum computers. The study highlights how CMOS technology acts as a bridge between classical electronics and quantum hardware.

DOI
10.5281/zenodo.20577630

Related papers

Fundamentals of Cryo-CMOS Circuits and Systems for Quantum Computing: Challenges and prospects in interfacing future quantum computers

Fabio Sebastiano

Quantum computing holds the potential to solve problems beyond the capabilities of classical computers. However, realizing practical large-scale quantum computers faces critical challenges, including the key bottleneck in wiring quantum processors operating at cryogenic temperatures to their room temperature control electronics. This article explores cryo-CMOS ICs as an enabling technology to circumvent such a wiring bottleneck. After reviewing the basics of quantum computing and the behavior of CMOS devices at cryogenic temperatures, the requirements for the interface electronics for superconducting and semiconductor qubits are discussed, and state-of-the-art cryo-CMOS circuit solutions are briefly described, including a few hints to other qubit platforms. Finally, the article concludes with an overview of future challenges to be addressed to realize the vision of cryo-CMOS technology as an enabler of large-scale quantum computers with practical applications.

IEEE Solid-State Circuits Magazine•Jan 1, 2025•8 citations

Cryo-CMOS Mixed-Signal Circuits for Scalable Quantum Computing: Challenges and Future Steps

Stavroula Kapoulea, Meraj Ahmad, Martin P. Weides +1 more

A systematic research on the development of cryogenic complementary metal-oxide semiconductor (cryo-CMOS) circuits, for implementing the required control electronics to manipulate the quantum bit (qubit) state, is performed over the last few years. Scalability constitutes a key term regarding the evolution of quantum computing from theory to practical application and CMOS technology has been proven to be a promising candidate for implementing the coveted scalable next-generation quantum computers (QCs). Mixed-signal blocks, used for uniting the analog and digital domains, play a key role in the efficient functionality of the qubit control/readout system, thus there is an ever-increasing interest in their high-performance circuit realization. The critical challenge in this venture is to achieve efficient cryogenic operation at low temperatures, i.e., close to the qubit around 4 K, simultaneously keeping power requirements at low values. An overview and comparison of the cryo-CMOS Digital-to-Analog converter (DAC) and Analog-to-Digital converter (ADC) circuit implementations for quantum computing applications that heretofore have been proposed in the literature is presented in this work. A discussion on the challenges and future strategic steps that are henceforth required to proceed toward the development of a functional scalable quantum computer is also conducted.

IEEE International Symposium on Circuits and Systems proceedings•May 21, 2023•6 citations

A system design approach toward integrated cryogenic quantum control systems

Mridula Prathapan, Peter R. Müeller, David Heim +8 more

In this paper, we provide a system level perspective on the design of control electronics for large scale quantum systems. Quantum computing systems with high-fidelity control and readout, coherent coupling, calibrated gates, and reconfigurable circuits with low error rates are expected to have superior quantum volumes. Cryogenic CMOS plays a crucial role in the realization of scalable quantum computers, by minimizing the feature size, lowering the cost, power consumption, and implementing low latency error correction. Our approach toward achieving scalable feed-back based control systems includes the design of memory based arbitrary waveform generators (AWG’s), wide band radio frequency analog to digital converters, integrated amplifier chain, and state discriminators that can be synchronized with gate sequences. Digitally assisted designs, when implemented in an advanced CMOS node such as 7 nm can reap the benefits of low power due to scaling. A qubit readout chain demands several amplification stages before the digitizer. We propose the co-integration of our in-house developed InP HEMT LNAs with CMOS LNA stages to achieve the required gain at the digitizer input with minimal area. Our approach using high impedance matching between the HEMT LNA and the cryogenic CMOS receiver can relax the design constraints of an inverter-based CMOS LNA, paving the way toward a fully integrated qubit readout chain. The qubit state discriminator consists of a digital signal processor that computes the qubit state from the digitizer output and a pre-determined threshold. The proposed system realizes feedback-based optimal control for error mitigation and reduction of the required data rate through the serial interface to room temperature electronics.

arXiv:2211.02081•IEEE Workshop on Low Temperature Electronics (WOLTE)•Jun 6, 2022•7 citations

Cryo-CMOS Electronics for Quantum Computing Applications

Edoardo Charbon A

Quantum computers hold the promise to solve some of the most complex problems of today. The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits are fragile and their state needs to be corrected in real time by a classical controller. Today, the control of qubits is done at room temperature by racks of instruments, while qubits operate at several tens of milli-Kelvin. To ensure compactness, and eventually scalability, we have proposed the use of controllers operating at a few Kelvin, so as to reduce the length of control cables, while potentially enabling superconductive interconnects, which enable virtually zero resistance and low thermal conductivity. We have chosen CMOS to achieve this functionality due to its scalable nature and overall miniaturization opportunities. Cryogenic CMOS, or cryo-CMOS, circuits and systems need to be carefully designed, so as to ensure low noise and high bandwidth, while operating at strict power budgets of a few milliwatts per qubit. In this paper, we outline the requirements of a classical controller and we show examples of such circuits and systems. Results and perspectives are presented discussing a roadmap for the future.

European Solid-State Device Research Conference•Sep 1, 2019•23 citations

Cryo-CMOS Electronics for Quantum Computing Applications

Edoardo Charbon A

Quantum computers hold the promise to solve some of the most complex problems of today. The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits are fragile and their state needs to be corrected in real time by a classical controller. Today, the control of qubits is done at room temperature by racks of instruments, while qubits operate at several tens of milli-Kelvin. To ensure compactness, and eventually scalability, we have proposed the use of controllers operating at a few Kelvin, so as to reduce the length of control cables, while potentially enabling superconductive interconnects, which enable virtually zero resistance and low thermal conductivity. We have chosen CMOS to achieve this functionality due to its scalable nature and overall miniaturization opportunities. Cryogenic CMOS, or cryo-CMOS, circuits and systems need to be carefully designed, so as to ensure low noise and high bandwidth, while operating at strict power budgets of a few milliwatts per qubit. In this paper, we outline the requirements of a classical controller and we show examples of such circuits and systems. Results and perspectives are presented discussing a roadmap for the future.

European Solid-State Circuits Conference (ESSCIRC)•Sep 1, 2019•9 citations

Transistors to transmons: large-scale cryogenic CMOS control of superconducting qubits

Devin Underwood

Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.

•Jul 3, 2026•0 citations
Quantum computing has emerged as a promising computational paradigm capable of solving certain problems beyond the practical capabilities of classical computers. Although quantum processors rely on quantum mechanical phenomena such as superposition and entanglement but their operation depends heavily on classical electronic systems for control, communication, and measurement. Complementary Metal Oxide Semiconductor (CMOS) technology plays a critical role in providing this electronic infrastructure due to its low power consumption, scalability, and high integration density. This paper explores the role of CMOS-based control electronics in superconducting quantum computing systems and the functions of key components including Arbitrary Waveform Generators (AWGs), Digital-to-Analog Converters (DACs), mixers, transmission lines, resonators, and readout circuits. The paper also examines the emerging field of Cryogenic CMOS (Cryo-CMOS), which aims to improve scalability and reduce latency in future quantum computers. The study highlights how CMOS technology acts as a bridge between classical electronics and quantum hardware.
Quantum computing holds the potential to solve problems beyond the capabilities of classical computers. However, realizing practical large-scale quantum computers faces critical challenges, including the key bottleneck in wiring quantum processors operating at cryogenic temperatures to their room temperature control electronics. This article explores cryo-CMOS ICs as an enabling technology to circumvent such a wiring bottleneck. After reviewing the basics of quantum computing and the behavior of CMOS devices at cryogenic temperatures, the requirements for the interface electronics for superconducting and semiconductor qubits are discussed, and state-of-the-art cryo-CMOS circuit solutions are briefly described, including a few hints to other qubit platforms. Finally, the article concludes with an overview of future challenges to be addressed to realize the vision of cryo-CMOS technology as an enabler of large-scale quantum computers with practical applications.
A systematic research on the development of cryogenic complementary metal-oxide semiconductor (cryo-CMOS) circuits, for implementing the required control electronics to manipulate the quantum bit (qubit) state, is performed over the last few years. Scalability constitutes a key term regarding the evolution of quantum computing from theory to practical application and CMOS technology has been proven to be a promising candidate for implementing the coveted scalable next-generation quantum computers (QCs). Mixed-signal blocks, used for uniting the analog and digital domains, play a key role in the efficient functionality of the qubit control/readout system, thus there is an ever-increasing interest in their high-performance circuit realization. The critical challenge in this venture is to achieve efficient cryogenic operation at low temperatures, i.e., close to the qubit around 4 K, simultaneously keeping power requirements at low values. An overview and comparison of the cryo-CMOS Digital-to-Analog converter (DAC) and Analog-to-Digital converter (ADC) circuit implementations for quantum computing applications that heretofore have been proposed in the literature is presented in this work. A discussion on the challenges and future strategic steps that are henceforth required to proceed toward the development of a functional scalable quantum computer is also conducted.
In this paper, we provide a system level perspective on the design of control electronics for large scale quantum systems. Quantum computing systems with high-fidelity control and readout, coherent coupling, calibrated gates, and reconfigurable circuits with low error rates are expected to have superior quantum volumes. Cryogenic CMOS plays a crucial role in the realization of scalable quantum computers, by minimizing the feature size, lowering the cost, power consumption, and implementing low latency error correction. Our approach toward achieving scalable feed-back based control systems includes the design of memory based arbitrary waveform generators (AWG’s), wide band radio frequency analog to digital converters, integrated amplifier chain, and state discriminators that can be synchronized with gate sequences. Digitally assisted designs, when implemented in an advanced CMOS node such as 7 nm can reap the benefits of low power due to scaling. A qubit readout chain demands several amplification stages before the digitizer. We propose the co-integration of our in-house developed InP HEMT LNAs with CMOS LNA stages to achieve the required gain at the digitizer input with minimal area. Our approach using high impedance matching between the HEMT LNA and the cryogenic CMOS receiver can relax the design constraints of an inverter-based CMOS LNA, paving the way toward a fully integrated qubit readout chain. The qubit state discriminator consists of a digital signal processor that computes the qubit state from the digitizer output and a pre-determined threshold. The proposed system realizes feedback-based optimal control for error mitigation and reduction of the required data rate through the serial interface to room temperature electronics.
Quantum computers hold the promise to solve some of the most complex problems of today. The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits are fragile and their state needs to be corrected in real time by a classical controller. Today, the control of qubits is done at room temperature by racks of instruments, while qubits operate at several tens of milli-Kelvin. To ensure compactness, and eventually scalability, we have proposed the use of controllers operating at a few Kelvin, so as to reduce the length of control cables, while potentially enabling superconductive interconnects, which enable virtually zero resistance and low thermal conductivity. We have chosen CMOS to achieve this functionality due to its scalable nature and overall miniaturization opportunities. Cryogenic CMOS, or cryo-CMOS, circuits and systems need to be carefully designed, so as to ensure low noise and high bandwidth, while operating at strict power budgets of a few milliwatts per qubit. In this paper, we outline the requirements of a classical controller and we show examples of such circuits and systems. Results and perspectives are presented discussing a roadmap for the future.
Quantum computers hold the promise to solve some of the most complex problems of today. The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits are fragile and their state needs to be corrected in real time by a classical controller. Today, the control of qubits is done at room temperature by racks of instruments, while qubits operate at several tens of milli-Kelvin. To ensure compactness, and eventually scalability, we have proposed the use of controllers operating at a few Kelvin, so as to reduce the length of control cables, while potentially enabling superconductive interconnects, which enable virtually zero resistance and low thermal conductivity. We have chosen CMOS to achieve this functionality due to its scalable nature and overall miniaturization opportunities. Cryogenic CMOS, or cryo-CMOS, circuits and systems need to be carefully designed, so as to ensure low noise and high bandwidth, while operating at strict power budgets of a few milliwatts per qubit. In this paper, we outline the requirements of a classical controller and we show examples of such circuits and systems. Results and perspectives are presented discussing a roadmap for the future.
Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.