Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

SPIE Quantum Technologies

Towards Rb PMC: loading, splicing, and lifetime studies on different capillaries

Rosu Baby, J. Ignacchiti, Sargis Jibilyan, Thomas Billotte, Jenny Jouin, Philippe Thomas, Frédéric Gérôme, Benoît Debord, Fetah Benabid

Published May 28, 2026• 0 citations
Publisher

Abstract

We report the fabrication, loading and hermetic sealing of rubidium-filled capillary-cells. The influence of different core surface materials (bare fused silica, octadecyltrichlorosilane-coated silica and borosilicate) on their ability to sustain stable vapor is investigated. Distinct sub-Doppler spectral features due to pump-probe spectroscopy are observed in the 3 types of stand-alone Rb-filled capillaries that have remained hermetically sealed for over a year.

DOI
10.1117/12.3099799

Related papers

Sealing techniques for on-chip atomic vapor cells

John F. Hulbert, Brandon T. Carroll, Aaron R. Hawkins +2 more

We have recently reported atomic spectroscopy using on-chip rubidium vapor cells based on hollow core waveguides. To make the cells more robust and capable of multiple temperature cycles, we examined several techniques for Rb introduction and sealing. To date the most successful sealing technique has been pinching off the end of a short length of copper tubing. This technique not only hermetically seals the cells, but also allows them to be evacuated to a desired pressure. We have been able to evacuate glass prototype Rb vapor cells to a pressure as low as 80 mTorr and as high as 2 Torr and successfully observe the Rb optical absorption spectrum. Along with our testing of sealing techniques we have been observing the effects of different epoxies and inert gas atmospheres on the robustness of vapor cells. With optimal parameters we have successfully observed the Rb optical absorption spectrum through multiple temperature cycles. These new Rb introduction and sealing methods will be applied to on-chip cells containing integrated hollow waveguides which can be used for a number of different optical applications, such as electromagnetically induced transparency, single-photon nonlinearities, and slow light.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 10, 2008•1 citation

Rubidium vapor cell miniaturization-influence on the optical pumping process

Dimitar G. Slavov, S. Cartaleva, David G. Sarkisyan +3 more

Indian Journal of Physics•Aug 1, 2010•3 citations

Temperature and wall coating dependence of alkali vapor transport speed in micron-scale capillaries

Matthieu Giraud-Carrier, Trevor K. Decker, Joshua S. McClellan +5 more

The impact of storage temperature and wall coatings on alkali vapor transport through micron-scale glass capillaries is analyzed. Glass microbore tubing, chromatography vials, and copper tubing are assembled into closed atomic spectroscopy units with varying capillary lengths and inner diameters. Such devices serve as valuable test models for integrated atomic spectroscopy platforms that rely on hollow-core optical waveguides for chip-scale implementation of quantum coherence phenomena such as slow and stopped light. The inside surface of the systems are coated with dimethyldichlorosilane (DMDCS) after which the system is loaded with rubidium vapor and hermetically sealed. The loaded units are stored in a tube furnace at elevated temperatures and tested daily for absorption over several weeks. Both a wall coating of DMDCS and higher storage temperature increases the transport speed of Rb vapor. The limits and implications of these results are discussed and compared to an expected theoretical model. Suggestions for increasing transport speed are given.

Journal of Vacuum Science & Technology A Vacuum Surfaces and Films•Mar 20, 2017•5 citations

Preliminary studies of Rb microfabricated cells for a two-photon Rb optical frequency reference

Martin Callejo, Rémy Vicarini, Philippe Abbé +2 more

Doppler-free two-photon absorption spectroscopy is employed to characterize the purity of rubidium vapor micro-fabricated cells. The observed broadening suggests the presence of impurities and contaminants in the cell.

•May 15, 2023•0 citations

Large-core photonic microcells for coherent optics and laser metrology

Natalie V. Wheeler, Michael D. W. Grogan, Yingying Wang +3 more

A photonic microcell (PMC) is a length of gas-filled hollow core-photonic crystal fiber (HC-PCF) which is hermetically sealed at both ends by splicing to standard single mode fiber. We describe advances in the fabrication technique of PMCs which enable large core Kagome-lattice HC-PCFs to be integrated into PMC form. The modified fabrication technique uses fiber-tapering to accommodate the large dimensions of the fiber and enables low loss splices with single mode fiber by reducing mode field mismatch. Splice losses as low as 0.6 dB are achieved between 1-cell defect Kagome HC-PCF and single mode fiber. Relative to the previously reported PMCs, which were based on photonic bandgap HC-PCF, the present Kagome HC-PCF based PMC provides broad optical transmission, surface mode-free guidance and larger core at the cost of slightly increased fiber attenuation (~0.2 dB/m). Therefore, the integration of this fiber into PMC form opens up new applications for PMC-based devices. The advantage of the large core dimensions and surface mode free guidance for quantum optics in gas-filled HC-PCF are demonstrated by generation of narrow sub-Doppler features in an acetylenefilled large core PMC.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 10, 2011•6 citations

Improvement of the spin polarization lifetime in the 85Rb vapor cell by octadecyltrichlorosilane coating

S.M.H. Khalkhali, Maliheh Ranjbaran, D. Mofidi +2 more

Chinese Journal of Physics•Feb 14, 2017•14 citations
We report the fabrication, loading and hermetic sealing of rubidium-filled capillary-cells. The influence of different core surface materials (bare fused silica, octadecyltrichlorosilane-coated silica and borosilicate) on their ability to sustain stable vapor is investigated. Distinct sub-Doppler spectral features due to pump-probe spectroscopy are observed in the 3 types of stand-alone Rb-filled capillaries that have remained hermetically sealed for over a year.
We have recently reported atomic spectroscopy using on-chip rubidium vapor cells based on hollow core waveguides. To make the cells more robust and capable of multiple temperature cycles, we examined several techniques for Rb introduction and sealing. To date the most successful sealing technique has been pinching off the end of a short length of copper tubing. This technique not only hermetically seals the cells, but also allows them to be evacuated to a desired pressure. We have been able to evacuate glass prototype Rb vapor cells to a pressure as low as 80 mTorr and as high as 2 Torr and successfully observe the Rb optical absorption spectrum. Along with our testing of sealing techniques we have been observing the effects of different epoxies and inert gas atmospheres on the robustness of vapor cells. With optimal parameters we have successfully observed the Rb optical absorption spectrum through multiple temperature cycles. These new Rb introduction and sealing methods will be applied to on-chip cells containing integrated hollow waveguides which can be used for a number of different optical applications, such as electromagnetically induced transparency, single-photon nonlinearities, and slow light.
The impact of storage temperature and wall coatings on alkali vapor transport through micron-scale glass capillaries is analyzed. Glass microbore tubing, chromatography vials, and copper tubing are assembled into closed atomic spectroscopy units with varying capillary lengths and inner diameters. Such devices serve as valuable test models for integrated atomic spectroscopy platforms that rely on hollow-core optical waveguides for chip-scale implementation of quantum coherence phenomena such as slow and stopped light. The inside surface of the systems are coated with dimethyldichlorosilane (DMDCS) after which the system is loaded with rubidium vapor and hermetically sealed. The loaded units are stored in a tube furnace at elevated temperatures and tested daily for absorption over several weeks. Both a wall coating of DMDCS and higher storage temperature increases the transport speed of Rb vapor. The limits and implications of these results are discussed and compared to an expected theoretical model. Suggestions for increasing transport speed are given.
A photonic microcell (PMC) is a length of gas-filled hollow core-photonic crystal fiber (HC-PCF) which is hermetically sealed at both ends by splicing to standard single mode fiber. We describe advances in the fabrication technique of PMCs which enable large core Kagome-lattice HC-PCFs to be integrated into PMC form. The modified fabrication technique uses fiber-tapering to accommodate the large dimensions of the fiber and enables low loss splices with single mode fiber by reducing mode field mismatch. Splice losses as low as 0.6 dB are achieved between 1-cell defect Kagome HC-PCF and single mode fiber. Relative to the previously reported PMCs, which were based on photonic bandgap HC-PCF, the present Kagome HC-PCF based PMC provides broad optical transmission, surface mode-free guidance and larger core at the cost of slightly increased fiber attenuation (~0.2 dB/m). Therefore, the integration of this fiber into PMC form opens up new applications for PMC-based devices. The advantage of the large core dimensions and surface mode free guidance for quantum optics in gas-filled HC-PCF are demonstrated by generation of narrow sub-Doppler features in an acetylenefilled large core PMC.