Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Detection Threshold for Q5 Phase-Cycling Signal

Craig Edwin Holdway

Published May 16, 2026• 0 citations
Publisher

Abstract

T74 establishes the statistical detection threshold for the Q5 phase-cycling signal developed in T72 and T73. Starting from the single-scan fringe residual\[\epsilon(\phi)=2\sqrt{P_1P_2}\bigl[(A-1)\cos\phi + B\sin\phi\bigr],\]The theorem defines the intrinsic bias magnitude\[\eta=\sqrt{(A-1)^2+B^2},\]and proves that the maximum balanced-path residual amplitude satisfies\[\epsilon_{\max}=\eta.\]A key refinement is introduced: measurement of a first-harmonic bias alone is not operationally sufficient for Q5 detection, because such a bias can be absorbed into standard interferometric fitting parameters. The correct discriminator is therefore the phase-cycling invariant\[\mathcal{I}_{\mathrm{Q5}}=\sum_{k=0}^{3}|v_{k+1}-Jv_k|^2,\]which tests whether the measured quadrature evolution obeys the expected \(\mathbb Z_4\) cycling structure established in T73. T74 proves that Q5 detectability requires two simultaneous conditions. First, the intrinsic signal scale must exceed the statistical shot-noise floor,\[\eta\gtrsim\frac{N_\sigma}{\sqrt N},\]where \(N\) is the photon count and \(N_\sigma\) is the required detection significance. Second, the observed phase evolution must remain consistent with the Q5 phase-cycling law through sufficiently small \(\mathcal{I}_{\mathrm{Q5}}\), distinguishing genuine Q5-compatible structure from ordinary calibration artifacts. Under shot-noise scaling, the minimum detectable bias obeys\[\eta_{\min}\sim\frac{N_\sigma}{\sqrt N}.\] T74 is structurally important because it completes the minimal experimental prediction arc initiated in T72 and T73 by separating signal shape, structural discriminator, and statistical detectability. The theorem converts the earlier transport-cycling framework into a falsifiable interferometric prediction program with explicitly identified observables, structural consistency conditions, and detection scaling laws. Status: solid for the fringe-residual amplitude relations and shot-noise detection-threshold scaling under the stated assumptions; solid for the necessity of combining signal magnitude with structural phase-cycling discrimination; conditional on the T73 \(\mathbb Z_4\) cycling framework and practical extraction of quadrature vectors; speculative for the existence or magnitude of any physical Q5 signal prior to empirical observation.

DOI
10.5281/zenodo.20369347

Related papers

Distinguishability of Q5 Deviations via Phase-Cycling Invariants

Craig Edwin Holdway

T73 develops a phase-cycling discriminator for Q5-consistent deviations that cannot be identified from a single interference scan. Building on T72, which shows that any first-harmonic residual can be absorbed by refitting the ordinary fringe parameters, T73 demonstrates that the lost information can survive in the constrained transformation law across multiple controlled phase settings. The theorem considers four scans separated by externally controlled \(\pi/2\) phase offsets and replaces independent per-scan refitting with a single jointly constrained fit across all four settings. For these offsets, the ordinary fringe model occupies one two-dimensional phase-cycling chirality subspace, while the opposite chirality subspace is exactly orthogonal to it. Consequently, the joint fit removes the ordinary \(J^{-1}\)-chirality component while preserving the orthogonal \(J\)-chirality component unattenuated. This yields the phase-cycling invariant \[ \mathcal I_{Z_4} = \sum_{k=0}^{3} \left|v_{k+1}-Jv_k\right|^2, \] where \(v_k\) is the residual quadrature vector extracted after the joint fit. A nontrivial signal detectable by this construction must exhibit the surviving quarter-turn transformation law \(v_{k+1}=Jv_k\), giving \(\mathcal I_{Z_4}\approx0\) with nonzero residual amplitude. The result is a single-chirality test rather than a choice between two equivalent rotation signs, because the opposite chirality is structurally absorbed by the joint null model. T73 does not establish that Q5's physical residual necessarily carries the surviving chirality. That identification requires a separate residual-to-observable bridge connecting the later Q5 residual structure to the experimental phase-cycling coordinates. Nor does the theorem establish immunity to correlated experimental systematics; those require separate noise and control analysis. T73 establishes the mathematical distinguishability mechanism and operational phase-cycling protocol under the stated common-reference and joint-fit assumptions. Status: solid for the exact chirality separation, joint-fit discriminator, and \(\mathbb Z_4\) phase-cycling invariant under the stated four-offset protocol; conditional on a common external phase reference and jointly constrained null model; unresolved as to whether the physical Q5 residual occupies the surviving chirality; no claim of experimental detection or uniqueness against all correlated systematics.

•May 23, 2026•0 citations

Null-Control Criterion for Q5 Quadrature Cycling

Craig Edwin Holdway

T79 completes the Q5 interferometric falsification framework by introducing a structured null-control protocol for quadrature-cycling residuals. Earlier theorems established the residual form, the \(\mathbb Z_4\) quadrature-cycling structure, statistical thresholds, magnitude estimates, and systematics discrimination criteria. T79 addresses the final degeneracy problem: the cycling defect\[\mathcal I_{\mathrm{Q5}}=\sum_{k=0}^{3}|v_{k+1}-Jv_k|^2\]can vanish trivially when all quadrature vectors are zero. The theorem, therefore, establishes the joint operational requirement\[\mathcal I_{\mathrm{Q5}}\approx0\quad\text{and}\quad|v_k|\not\approx0,\]ensuring that the detected structure corresponds to nontrivial quadrature transport rather than the simple absence of signal. The theorem then defines four explicit null-control experiments designed to isolate ordinary instrumental artifacts from candidate Q5-consistent cycling structure. These include blocked-path operation, detector-only measurements, intentional laser-power modulation, and a classical phase-reference channel. Each control specifies a concrete pass condition under which stable, nonzero quarter-cycle transport behaviour must disappear or fail to persist. In particular, blocked-path operation forces \(P_1P_2=0\), eliminating the interference residual derived in T72, while detector-only and reference-channel measurements test whether the observed cycling behaviour originates from instrumentation rather than coherent transport structure. T79 reframes the experimental objective as layered falsification rather than direct proof. A candidate signal survives only if coherent two-path interference exhibits nonzero stable quadrature vectors satisfying the quarter-cycle rotation law, while all null controls fail to reproduce the same structured behaviour. The theorem, therefore, converts the earlier invariant framework into a hardened experimental protocol capable of rejecting broad classes of ordinary systematic effects without claiming definitive proof of Q5 transport itself. Passing the protocol establishes only that the observed cycling behaviour survives the identified null controls and remains structurally consistent with the Q5 quadrature-transport prediction. Status: solid for the joint nontriviality condition \(\mathcal I_{\mathrm{Q5}}\approx0\) together with \(|v_k|\not\approx0\); solid for the blocked-path null implied by the T72 interference structure; solid that the four null controls define experimentally testable falsification operations; conditional on whether the listed controls exhaust all relevant systematic classes for a given experimental platform; not a claim that passing the full null-control protocol would uniquely establish Q5 transport physics.

•May 23, 2026•0 citations

Q5 Fringe-Bias Scale from Leakage Weights

Craig Edwin Holdway

T75 develops a model-dependent prediction for the observable Q5 fringe-bias scale arising from leakage into hidden quarter-phase transport classes. Using the weight parameterization\[w_0=1-\epsilon,\qquadw_1=\epsilon_1,\qquadw_2=\epsilon_2,\qquadw_3=\epsilon_3,\]with\[\epsilon_1+\epsilon_2+\epsilon_3=\epsilon\ll1,\]The theorem derives the exact bias relation\[\eta^2=(\epsilon+\epsilon_2)^2+(\epsilon_3-\epsilon_1)^2.\]The resulting fringe bias is therefore controlled not only by total leakage magnitude but also by the structure of the leakage distribution across the quarter-phase classes. The cosine-sector deviation arises from the overall leakage displacement term \((\epsilon+\epsilon_2)\), while the sine-sector deviation is governed by the antisymmetric imbalance mode \((\epsilon_3-\epsilon_1)\). T75 is structurally important because it converts the earlier qualitative leakage architecture into a quantitative interferometric prediction. Under the Q5 suppression estimates inherited from T57, the theorem predicts a characteristic fringe-bias scale\[\eta_{\mathrm{Q5}}\sim10^{-4}\]for single-bridge leakage, and\[\eta_{\mathrm{Q5}}\sim10^{-7}\]under an additional return-mediated suppression layer. The theorem, therefore, supplies the missing magnitude estimate needed to complete the experimental prediction arc developed through T72-T74: signal form, structural discriminator, detection threshold, and expected signal scale. T75 does not claim a universal numerical prediction or guaranteed observability across interferometer designs. The predicted magnitude depends on the leakage-path architecture, the symmetry properties of the leakage distribution, and the mapping between the structural suppression parameter \(\epsilon\) and experimentally accessible optical leakage modes. The resulting prediction is therefore conditional rather than uniquely derived. Status: solid for the exact leakage-weight decomposition\[\eta^2=(\epsilon+\epsilon_2)^2+(\epsilon_3-\epsilon_1)^2\]and for the associated order-of-magnitude scaling analysis under the stated assumptions; conditional on the leakage-path architecture, symmetry structure, and suppression mapping inherited from T57; speculative for the existence or observability of any physical Q5 fringe residual prior to experimental detection.

•May 23, 2026•0 citations

Identification of the Reduced Barrier Cycle Operator

Craig Edwin Holdway

T86 establishes the reduced barrier cycle operator for the Q5 transport framework. Let\[A=E_d=i\sigma_y,\qquadA^2=-I,\]and let\[\mathcal B\]denote the full Q5 barrier crossing operator containing the orientation-reversal component \(\Theta\). Using the canonical phase projection\[\Pi_{\mathrm{phase}},\]introduced in T26-T29, the theorem identifies the reduced barrier operator\[B_{\mathrm{red}}=\Pi_{\mathrm{phase}}(\mathcal B),\]under the conditional assumption that the barrier crossing acts as a quarter-turn on the reduced defect plane. Under this assumption,\[\boxed{B_{\mathrm{red}}=e^{(\pi/4)A}.}\] Using the exponential identity\[e^{\theta A}=I\cos\theta + A\sin\theta,\]The theorem proves\[B_{\mathrm{red}}^4=-I,\qquadB_{\mathrm{red}}^8=I.\] The reduced barrier operator therefore, produces the spinor state cycle\[\psi_{n+4}=-\psi_n,\qquad\psi_{n+8}=\psi_n,\]giving a \(\mathbb Z_8\) state period and a \(\mathbb Z_4\) observable period through projective sign identification. T86 is structurally important because it isolates the reduced coarse barrier operator explicitly within the Q5 framework. Earlier theorems established:- the rotational generator \(A\),- the barrier crossing structure,- and the projection architecture. T86 now combines these ingredients into a single reduced operator form. The theorem also sharply isolates the remaining open step. The algebraic structure\[e^{(\pi/4)A}\]correctly reproduces the required \(\mathbb Z_8\) cycling, but the geometric origin of the quarter-turn angle\[\pi/4\]has not yet been derived from first-principles Q5 barrier geometry. Accordingly, T86 proves:\[\Pi_{\mathrm{phase}}(\mathcal B)=e^{(\pi/4)A}\]conditional on the quarter-turn assumption, while T87 is designated as the theorem responsible for deriving the angle geometrically. The theorem further clarifies that the identification applies only after projection onto the reduced defect plane. The full barrier operator\[\mathcal B\]contains orientation-reversal structure and scalar/symmetric dressing removed by\[\Pi_{\mathrm{phase}}.\] Thus, the clean exponential form\[e^{(\pi/4)A}\]It is a reduced-sector statement rather than a claim about the full raw barrier operator globally. T86 therefore serves as the algebraic bridge connecting:- the barrier crossing structure from T47-T49,- the \(\mathbb Z_8\) spinor cycling from T68,- and the dual-scale generator structure established in T85. Status: solid for\[e^{(\pi/4)A}\]producing\[B_{\mathrm{red}}^4=-I,\qquadB_{\mathrm{red}}^8=I,\]and for the resulting \(\mathbb Z_8/\mathbb Z_4\) cycling structure; solid for the projection properties of\[\Pi_{\mathrm{phase}};\]conditional for the identification\[\Pi_{\mathrm{phase}}(\mathcal B)=e^{(\pi/4)A},\]which depends on deriving the quarter-turn angle\[\pi/4\]from Q5 barrier geometry in T87.

•May 25, 2026•0 citations

Coarse Spinor Cycling and Fine Phase Accumulation

Craig Edwin Holdway

T85 establishes the dual-scale generator structure underlying coarse spinor cycling and fine phase accumulation in the Q5 transport framework. Starting from the rotational generator\[A^2=-I,\]The theorem defines the coarse barrier-cycle operator\[B=e^{(\pi/4)A}.\] Using the exponential identity\[e^{\theta A}=I\cos\theta + A\sin\theta,\]The theorem proves\[B^4=-I,\qquadB^8=I.\] Thus, the coarse barrier operator exhibits a \(\mathbb Z_8\) spinor cycle with sign reversal at the half-cycle. Separately, the reduced near-identity phase transport operator\[T_{\mathrm{phase}}=I+\frac1{160}A+O\left(\frac1{160^2}\right)\]satisfies, by T80,\[T_{\mathrm{phase}}^k\toe^{(k/160)A}.\] The theorem, therefore establishes that the same generator \(A\) supports two compatible transport structures:\[B^n=e^{(n\pi/4)A}\]and\[T_{\mathrm{phase}}^k\toe^{(k/160)A}.\] The first defines coarse \(\mathbb Z_8\) spinor cycling at step size\[\pi/4,\]while the second defines fine accumulated phase transport at the step size\[1/160.\] T85 is structurally important because it resolves the apparent tension between coarse barrier cycling and fine transport accumulation. The theorem shows that these are not competing clocks and do not contradict one another. They are structurally distinct operators generated by the same rotational algebra. The coarse barrier cycle governs finite crossing symmetry:\[B^8=I.\] The fine transport operator governs the gradual accumulated phase evolution:\[\mu_k=\sin(k/160)+O(1/160).\] The theorem therefore unifies the coarse spinor structure from T47-T49/T68 with the continuous transport structure developed in T80-T84. A key consequence is that coarse \(\mathbb Z_8\) cycling does not reset fine accumulated transport. Eight fine transport steps accumulate only\[8/160=1/20,\]far from a full \(2\pi\) phase cycle, so fine accumulation persists independently of the coarse barrier period. The theorem also clarifies that both structures arise from the same Lie-generator algebra:\[A^2=-I.\]The coexistence of coarse cycling and fine transport is therefore a structural consequence of the common generator rather than a coincidence of notation. Status: solid for\[B^4=-I,\qquadB^8=I,\]and for the dual exponential structures generated by \(A\); solid for the compatibility of coarse \(\mathbb Z_8\) cycling and fine \(1/160\) phase accumulation given the T80 continuous-limit theorem; conditional for the physical identification of \(B\) and \(T_{\mathrm{phase}}\) with the Q5 barrier and reduced transport operators through the T47-T49 and T80-T82 chains.

•May 25, 2026•0 citations

Experimental Quadrature Extraction Protocol

Craig Edwin Holdway

This record presents TA21 (Experimental Quadrature Extraction Protocol), part of the Q5 Transport Architecture Series developed under the Zero-Point Hypothesis framework. TA20 identified the three-part diagnostic signature for Q5 depth-mode leakage: monotone mode scaling, smooth-mode null, and phase-locked quadrature deviation. TA21 converts this control logic into a concrete operational protocol specifying preparation steps, measurement procedure, fitting procedure, and control experiments. The depth coordinate arising in the Q5 framework from the 320-slot transport graph structure does not have a direct laboratory counterpart. The protocol, therefore, works with a structural analog: depth modes of frequency n are simulated by inserting a phase modulator in one arm of a standard two-path interferometer and driving it with a structured phase profile equal to n times a fixed reference profile. The modulation frequency n plays the role of the depth-mode index, with n equal to zero giving a flat constant phase corresponding to the smooth gate-aligned mode, and increasing n giving increasing phase oscillation corresponding to higher depth modes. The protocol tests mode-dependent transport sensitivity rather than literal realization of the depth coordinate. The spectral scaling of leakage with modulation frequency is the object under test, not the geometric origin of that scaling. The measurement procedure scans the global inter-arm phase and records the interference intensity as a function of phase for each modulation frequency. The intensity pattern is fit to a quadrature form, extracting coefficients A_n and B_n. The deviation magnitude is then computed as the square root of the sum of squares of A_n minus one and B_n, providing a scalar observable that can be plotted against n. The TA20 signature is tested by checking three conditions. First, smooth-mode null: the deviation magnitude at n equal to zero should vanish or be negligible. Second, monotone scaling: the deviation magnitude should show a trend-level monotonic increase with n up to experimental uncertainty, with the stronger model-dependent form predicting scaling as eta times n squared. Third, phase-locked quadrature: the deviation must remain in the cosine-phi and sine-phi basis rather than appearing as random fringe drift, amplitude noise, or uncontrolled phase wandering. Three control experiments provide false-positive rejection. Power variation changes beam intensity without changing phase structure and should leave the deviation magnitude unchanged, ruling out intensity artifacts. Noise injection adds random phase noise and should reduce visibility without producing clean n-dependent scaling, ruling out noise-driven drift. Symmetric modulation applies identical phase modulation to both arms and should suppress the deviation to near zero, because the symmetric modulation cancels in interference. The symmetric modulation control is the strongest of the three because it directly tests whether asymmetry is essential to the signal, which matches the leakage architecture. The measurement machinery is standard: two-path interferometry and quadrature extraction are established experimental techniques. The interpretation is not standard and is classified separately. The mapping from phase modulation to depth-mode analog is a structural analogy, not a formal derivation. The TA18 through TA19 depth-leakage model is falsified at the protocol level if the deviation magnitude shows no n-dependence, if the deviation is random or phase-unlocked, or if the symmetric control fails to suppress the deviation. A positive result compatible with all three conditions does not constitute proof of the Q5 mechanism but constitutes a result consistent with it. The theorem chain progressively derives the structure of the effective transport generator \[ G_eff = Pi_Y G Pi_Y + K†BK \], from which observable phase, leakage, decoherence, and residual correction emerge as structural consequences of projected transport closure on Q5.

•May 18, 2026•0 citations
T74 establishes the statistical detection threshold for the Q5 phase-cycling signal developed in T72 and T73. Starting from the single-scan fringe residual[\epsilon(\phi)=2\sqrt{P_1P_2}\bigl[(A-1)\cos\phi + B\sin\phi\bigr],]The theorem defines the intrinsic bias magnitude[\eta=\sqrt{(A-1)^2+B^2},]and proves that the maximum balanced-path residual amplitude satisfies[\epsilon_{\max}=\eta.]A key refinement is introduced: measurement of a first-harmonic bias alone is not operationally sufficient for Q5 detection, because such a bias can be absorbed into standard interferometric fitting parameters. The correct discriminator is therefore the phase-cycling invariant[\mathcal{I}{\mathrm{Q5}}=\sum{k=0}^{3}|v_{k+1}-Jv_k|^2,]which tests whether the measured quadrature evolution obeys the expected (\mathbb Z_4) cycling structure established in T73. T74 proves that Q5 detectability requires two simultaneous conditions. First, the intrinsic signal scale must exceed the statistical shot-noise floor,[\eta\gtrsim\frac{N_\sigma}{\sqrt N},]where (N) is the photon count and (N_\sigma) is the required detection significance. Second, the observed phase evolution must remain consistent with the Q5 phase-cycling law through sufficiently small (\mathcal{I}{\mathrm{Q5}}), distinguishing genuine Q5-compatible structure from ordinary calibration artifacts. Under shot-noise scaling, the minimum detectable bias obeys[\eta{\min}\sim\frac{N_\sigma}{\sqrt N}.] T74 is structurally important because it completes the minimal experimental prediction arc initiated in T72 and T73 by separating signal shape, structural discriminator, and statistical detectability. The theorem converts the earlier transport-cycling framework into a falsifiable interferometric prediction program with explicitly identified observables, structural consistency conditions, and detection scaling laws. Status: solid for the fringe-residual amplitude relations and shot-noise detection-threshold scaling under the stated assumptions; solid for the necessity of combining signal magnitude with structural phase-cycling discrimination; conditional on the T73 (\mathbb Z_4) cycling framework and practical extraction of quadrature vectors; speculative for the existence or magnitude of any physical Q5 signal prior to empirical observation.
T73 develops a phase-cycling discriminator for Q5-consistent deviations that cannot be identified from a single interference scan. Building on T72, which shows that any first-harmonic residual can be absorbed by refitting the ordinary fringe parameters, T73 demonstrates that the lost information can survive in the constrained transformation law across multiple controlled phase settings. The theorem considers four scans separated by externally controlled π/2\pi/2π/2 phase offsets and replaces independent per-scan refitting with a single jointly constrained fit across all four settings. For these offsets, the ordinary fringe model occupies one two-dimensional phase-cycling chirality subspace, while the opposite chirality subspace is exactly orthogonal to it. Consequently, the joint fit removes the ordinary J−1J^{-1}J−1-chirality component while preserving the orthogonal JJJ-chirality component unattenuated. This yields the phase-cycling invariant IZ4=∑k=03∣vk+1−Jvk∣2, \mathcal I_{Z_4} = \sum_{k=0}^{3} \left|v_{k+1}-Jv_k\right|^2, IZ4​​=∑k=03​∣vk+1​−Jvk​∣2, where vkv_kvk​ is the residual quadrature vector extracted after the joint fit. A nontrivial signal detectable by this construction must exhibit the surviving quarter-turn transformation law vk+1=Jvkv_{k+1}=Jv_kvk+1​=Jvk​, giving IZ4≈0\mathcal I_{Z_4}\approx0IZ4​​≈0 with nonzero residual amplitude. The result is a single-chirality test rather than a choice between two equivalent rotation signs, because the opposite chirality is structurally absorbed by the joint null model. T73 does not establish that Q5's physical residual necessarily carries the surviving chirality. That identification requires a separate residual-to-observable bridge connecting the later Q5 residual structure to the experimental phase-cycling coordinates. Nor does the theorem establish immunity to correlated experimental systematics; those require separate noise and control analysis. T73 establishes the mathematical distinguishability mechanism and operational phase-cycling protocol under the stated common-reference and joint-fit assumptions. Status: solid for the exact chirality separation, joint-fit discriminator, and Z4\mathbb Z_4Z4​ phase-cycling invariant under the stated four-offset protocol; conditional on a common external phase reference and jointly constrained null model; unresolved as to whether the physical Q5 residual occupies the surviving chirality; no claim of experimental detection or uniqueness against all correlated systematics.
T79 completes the Q5 interferometric falsification framework by introducing a structured null-control protocol for quadrature-cycling residuals. Earlier theorems established the residual form, the Z4\mathbb Z_4Z4​ quadrature-cycling structure, statistical thresholds, magnitude estimates, and systematics discrimination criteria. T79 addresses the final degeneracy problem: the cycling defectIQ5=∑k=03∣vk+1−Jvk∣2\mathcal I_{\mathrm{Q5}}=\sum_{k=0}^{3}|v_{k+1}-Jv_k|^2IQ5​=∑k=03​∣vk+1​−Jvk​∣2can vanish trivially when all quadrature vectors are zero. The theorem, therefore, establishes the joint operational requirementIQ5≈0and∣vk∣≉0,\mathcal I_{\mathrm{Q5}}\approx0\quad\text{and}\quad|v_k|\not\approx0,IQ5​≈0and∣vk​∣≈0,ensuring that the detected structure corresponds to nontrivial quadrature transport rather than the simple absence of signal. The theorem then defines four explicit null-control experiments designed to isolate ordinary instrumental artifacts from candidate Q5-consistent cycling structure. These include blocked-path operation, detector-only measurements, intentional laser-power modulation, and a classical phase-reference channel. Each control specifies a concrete pass condition under which stable, nonzero quarter-cycle transport behaviour must disappear or fail to persist. In particular, blocked-path operation forces P1P2=0P_1P_2=0P1​P2​=0, eliminating the interference residual derived in T72, while detector-only and reference-channel measurements test whether the observed cycling behaviour originates from instrumentation rather than coherent transport structure. T79 reframes the experimental objective as layered falsification rather than direct proof. A candidate signal survives only if coherent two-path interference exhibits nonzero stable quadrature vectors satisfying the quarter-cycle rotation law, while all null controls fail to reproduce the same structured behaviour. The theorem, therefore, converts the earlier invariant framework into a hardened experimental protocol capable of rejecting broad classes of ordinary systematic effects without claiming definitive proof of Q5 transport itself. Passing the protocol establishes only that the observed cycling behaviour survives the identified null controls and remains structurally consistent with the Q5 quadrature-transport prediction. Status: solid for the joint nontriviality condition IQ5≈0\mathcal I_{\mathrm{Q5}}\approx0IQ5​≈0 together with ∣vk∣≉0|v_k|\not\approx0∣vk​∣≈0; solid for the blocked-path null implied by the T72 interference structure; solid that the four null controls define experimentally testable falsification operations; conditional on whether the listed controls exhaust all relevant systematic classes for a given experimental platform; not a claim that passing the full null-control protocol would uniquely establish Q5 transport physics.
T75 develops a model-dependent prediction for the observable Q5 fringe-bias scale arising from leakage into hidden quarter-phase transport classes. Using the weight parameterization\[w_0=1-\epsilon,\qquadw_1=\epsilon_1,\qquadw_2=\epsilon_2,\qquadw_3=\epsilon_3,\]withϵ1+ϵ2+ϵ3=ϵ≪1,\epsilon_1+\epsilon_2+\epsilon_3=\epsilon\ll1,ϵ1​+ϵ2​+ϵ3​=ϵ≪1,The theorem derives the exact bias relationη2=(ϵ+ϵ2)2+(ϵ3−ϵ1)2.\eta^2=(\epsilon+\epsilon_2)^2+(\epsilon_3-\epsilon_1)^2.η2=(ϵ+ϵ2​)2+(ϵ3​−ϵ1​)2.The resulting fringe bias is therefore controlled not only by total leakage magnitude but also by the structure of the leakage distribution across the quarter-phase classes. The cosine-sector deviation arises from the overall leakage displacement term (ϵ+ϵ2)(\epsilon+\epsilon_2)(ϵ+ϵ2​), while the sine-sector deviation is governed by the antisymmetric imbalance mode (ϵ3−ϵ1)(\epsilon_3-\epsilon_1)(ϵ3​−ϵ1​). T75 is structurally important because it converts the earlier qualitative leakage architecture into a quantitative interferometric prediction. Under the Q5 suppression estimates inherited from T57, the theorem predicts a characteristic fringe-bias scaleηQ5∼10−4\eta_{\mathrm{Q5}}\sim10^{-4}ηQ5​∼10−4for single-bridge leakage, andηQ5∼10−7\eta_{\mathrm{Q5}}\sim10^{-7}ηQ5​∼10−7under an additional return-mediated suppression layer. The theorem, therefore, supplies the missing magnitude estimate needed to complete the experimental prediction arc developed through T72-T74: signal form, structural discriminator, detection threshold, and expected signal scale. T75 does not claim a universal numerical prediction or guaranteed observability across interferometer designs. The predicted magnitude depends on the leakage-path architecture, the symmetry properties of the leakage distribution, and the mapping between the structural suppression parameter ϵ\epsilonϵ and experimentally accessible optical leakage modes. The resulting prediction is therefore conditional rather than uniquely derived. Status: solid for the exact leakage-weight decompositionη2=(ϵ+ϵ2)2+(ϵ3−ϵ1)2\eta^2=(\epsilon+\epsilon_2)^2+(\epsilon_3-\epsilon_1)^2η2=(ϵ+ϵ2​)2+(ϵ3​−ϵ1​)2and for the associated order-of-magnitude scaling analysis under the stated assumptions; conditional on the leakage-path architecture, symmetry structure, and suppression mapping inherited from T57; speculative for the existence or observability of any physical Q5 fringe residual prior to experimental detection.
T86 establishes the reduced barrier cycle operator for the Q5 transport framework. Let\[A=E_d=i\sigma_y,\qquadA^2=-I,\]and letB\mathcal BBdenote the full Q5 barrier crossing operator containing the orientation-reversal component Θ\ThetaΘ. Using the canonical phase projectionΠphase,\Pi_{\mathrm{phase}},Πphase​,introduced in T26-T29, the theorem identifies the reduced barrier operatorBred=Πphase(B),B_{\mathrm{red}}=\Pi_{\mathrm{phase}}(\mathcal B),Bred​=Πphase​(B),under the conditional assumption that the barrier crossing acts as a quarter-turn on the reduced defect plane. Under this assumption,Bred=e(π/4)A.\boxed{B_{\mathrm{red}}=e^{(\pi/4)A}.}Bred​=e(π/4)A.​ Using the exponential identityeθA=Icos⁡θ+Asin⁡θ,e^{\theta A}=I\cos\theta + A\sin\theta,eθA=Icosθ+Asinθ,The theorem proves\[B_{\mathrm{red}}^4=-I,\qquadB_{\mathrm{red}}^8=I.\] The reduced barrier operator therefore, produces the spinor state cycleψn+4=−ψn,ψn+8=ψn,\psi_{n+4}=-\psi_n,\qquad\psi_{n+8}=\psi_n,ψn+4​=−ψn​,ψn+8​=ψn​,giving a Z8\mathbb Z_8Z8​ state period and a Z4\mathbb Z_4Z4​ observable period through projective sign identification. T86 is structurally important because it isolates the reduced coarse barrier operator explicitly within the Q5 framework. Earlier theorems established:- the rotational generator AAA,- the barrier crossing structure,- and the projection architecture. T86 now combines these ingredients into a single reduced operator form. The theorem also sharply isolates the remaining open step. The algebraic structuree(π/4)Ae^{(\pi/4)A}e(π/4)Acorrectly reproduces the required Z8\mathbb Z_8Z8​ cycling, but the geometric origin of the quarter-turn angleπ/4\pi/4π/4has not yet been derived from first-principles Q5 barrier geometry. Accordingly, T86 proves:Πphase(B)=e(π/4)A\Pi_{\mathrm{phase}}(\mathcal B)=e^{(\pi/4)A}Πphase​(B)=e(π/4)Aconditional on the quarter-turn assumption, while T87 is designated as the theorem responsible for deriving the angle geometrically. The theorem further clarifies that the identification applies only after projection onto the reduced defect plane. The full barrier operatorB\mathcal BBcontains orientation-reversal structure and scalar/symmetric dressing removed byΠphase.\Pi_{\mathrm{phase}}.Πphase​. Thus, the clean exponential forme(π/4)Ae^{(\pi/4)A}e(π/4)AIt is a reduced-sector statement rather than a claim about the full raw barrier operator globally. T86 therefore serves as the algebraic bridge connecting:- the barrier crossing structure from T47-T49,- the Z8\mathbb Z_8Z8​ spinor cycling from T68,- and the dual-scale generator structure established in T85. Status: solid fore(π/4)Ae^{(\pi/4)A}e(π/4)Aproducing\[B_{\mathrm{red}}^4=-I,\qquadB_{\mathrm{red}}^8=I,\]and for the resulting Z8/Z4\mathbb Z_8/\mathbb Z_4Z8​/Z4​ cycling structure; solid for the projection properties ofΠphase;\Pi_{\mathrm{phase}};Πphase​;conditional for the identificationΠphase(B)=e(π/4)A,\Pi_{\mathrm{phase}}(\mathcal B)=e^{(\pi/4)A},Πphase​(B)=e(π/4)A,which depends on deriving the quarter-turn angleπ/4\pi/4π/4from Q5 barrier geometry in T87.
T85 establishes the dual-scale generator structure underlying coarse spinor cycling and fine phase accumulation in the Q5 transport framework. Starting from the rotational generatorA2=−I,A^2=-I,A2=−I,The theorem defines the coarse barrier-cycle operatorB=e(π/4)A.B=e^{(\pi/4)A}.B=e(π/4)A. Using the exponential identityeθA=Icos⁡θ+Asin⁡θ,e^{\theta A}=I\cos\theta + A\sin\theta,eθA=Icosθ+Asinθ,The theorem proves\[B^4=-I,\qquadB^8=I.\] Thus, the coarse barrier operator exhibits a Z8\mathbb Z_8Z8​ spinor cycle with sign reversal at the half-cycle. Separately, the reduced near-identity phase transport operatorTphase=I+1160A+O(11602)T_{\mathrm{phase}}=I+\frac1{160}A+O\left(\frac1{160^2}\right)Tphase​=I+1601​A+O(16021​)satisfies, by T80,\[T_{\mathrm{phase}}^k\toe^{(k/160)A}.\] The theorem, therefore establishes that the same generator AAA supports two compatible transport structures:Bn=e(nπ/4)AB^n=e^{(n\pi/4)A}Bn=e(nπ/4)Aand\[T_{\mathrm{phase}}^k\toe^{(k/160)A}.\] The first defines coarse Z8\mathbb Z_8Z8​ spinor cycling at step sizeπ/4,\pi/4,π/4,while the second defines fine accumulated phase transport at the step size1/160.1/160.1/160. T85 is structurally important because it resolves the apparent tension between coarse barrier cycling and fine transport accumulation. The theorem shows that these are not competing clocks and do not contradict one another. They are structurally distinct operators generated by the same rotational algebra. The coarse barrier cycle governs finite crossing symmetry:B8=I.B^8=I.B8=I. The fine transport operator governs the gradual accumulated phase evolution:μk=sin⁡(k/160)+O(1/160).\mu_k=\sin(k/160)+O(1/160).μk​=sin(k/160)+O(1/160). The theorem therefore unifies the coarse spinor structure from T47-T49/T68 with the continuous transport structure developed in T80-T84. A key consequence is that coarse Z8\mathbb Z_8Z8​ cycling does not reset fine accumulated transport. Eight fine transport steps accumulate only8/160=1/20,8/160=1/20,8/160=1/20,far from a full 2π2\pi2π phase cycle, so fine accumulation persists independently of the coarse barrier period. The theorem also clarifies that both structures arise from the same Lie-generator algebra:A2=−I.A^2=-I.A2=−I.The coexistence of coarse cycling and fine transport is therefore a structural consequence of the common generator rather than a coincidence of notation. Status: solid for\[B^4=-I,\qquadB^8=I,\]and for the dual exponential structures generated by AAA; solid for the compatibility of coarse Z8\mathbb Z_8Z8​ cycling and fine 1/1601/1601/160 phase accumulation given the T80 continuous-limit theorem; conditional for the physical identification of BBB and TphaseT_{\mathrm{phase}}Tphase​ with the Q5 barrier and reduced transport operators through the T47-T49 and T80-T82 chains.
This record presents TA21 (Experimental Quadrature Extraction Protocol), part of the Q5 Transport Architecture Series developed under the Zero-Point Hypothesis framework. TA20 identified the three-part diagnostic signature for Q5 depth-mode leakage: monotone mode scaling, smooth-mode null, and phase-locked quadrature deviation. TA21 converts this control logic into a concrete operational protocol specifying preparation steps, measurement procedure, fitting procedure, and control experiments. The depth coordinate arising in the Q5 framework from the 320-slot transport graph structure does not have a direct laboratory counterpart. The protocol, therefore, works with a structural analog: depth modes of frequency n are simulated by inserting a phase modulator in one arm of a standard two-path interferometer and driving it with a structured phase profile equal to n times a fixed reference profile. The modulation frequency n plays the role of the depth-mode index, with n equal to zero giving a flat constant phase corresponding to the smooth gate-aligned mode, and increasing n giving increasing phase oscillation corresponding to higher depth modes. The protocol tests mode-dependent transport sensitivity rather than literal realization of the depth coordinate. The spectral scaling of leakage with modulation frequency is the object under test, not the geometric origin of that scaling. The measurement procedure scans the global inter-arm phase and records the interference intensity as a function of phase for each modulation frequency. The intensity pattern is fit to a quadrature form, extracting coefficients A_n and B_n. The deviation magnitude is then computed as the square root of the sum of squares of A_n minus one and B_n, providing a scalar observable that can be plotted against n. The TA20 signature is tested by checking three conditions. First, smooth-mode null: the deviation magnitude at n equal to zero should vanish or be negligible. Second, monotone scaling: the deviation magnitude should show a trend-level monotonic increase with n up to experimental uncertainty, with the stronger model-dependent form predicting scaling as eta times n squared. Third, phase-locked quadrature: the deviation must remain in the cosine-phi and sine-phi basis rather than appearing as random fringe drift, amplitude noise, or uncontrolled phase wandering. Three control experiments provide false-positive rejection. Power variation changes beam intensity without changing phase structure and should leave the deviation magnitude unchanged, ruling out intensity artifacts. Noise injection adds random phase noise and should reduce visibility without producing clean n-dependent scaling, ruling out noise-driven drift. Symmetric modulation applies identical phase modulation to both arms and should suppress the deviation to near zero, because the symmetric modulation cancels in interference. The symmetric modulation control is the strongest of the three because it directly tests whether asymmetry is essential to the signal, which matches the leakage architecture. The measurement machinery is standard: two-path interferometry and quadrature extraction are established experimental techniques. The interpretation is not standard and is classified separately. The mapping from phase modulation to depth-mode analog is a structural analogy, not a formal derivation. The TA18 through TA19 depth-leakage model is falsified at the protocol level if the deviation magnitude shows no n-dependence, if the deviation is random or phase-unlocked, or if the symmetric control fails to suppress the deviation. A positive result compatible with all three conditions does not constitute proof of the Q5 mechanism but constitutes a result consistent with it. The theorem chain progressively derives the structure of the effective transport generator Geff=PiYGPiY+K†BK G_eff = Pi_Y G Pi_Y + K†BK Ge​ff=PiY​GPiY​+K†BK, from which observable phase, leakage, decoherence, and residual correction emerge as structural consequences of projected transport closure on Q5.