Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS)

Monolithic Quantum Random Number Generator Containing Si-LED, SPAD and Analog Processing

Horst Zimmermann, David Bugl, Bernhard Goll, Michael Hofbauer, Kerstin Schneider-Hornstein, Hiwa Mahmoudi

Published Apr 27, 2026• 0 citations
Publisher

Abstract

This work describes a monolithically integrated photonic quantum random number generator (QRNG) in$0.35 \mu ~\mathrm{m}$CMOS. This QRNG consists of a light-emitting diode inside a deep N-well, a ring single-photon avalanche diode (SPAD), a fast cascoded active quenching and resetting circuit, and an analog evaluation circuit determining whether the random bit is a “0” or “1”. The random bits are created by comparison of two consecutive time intervals between photon detections using charging and discharging a capacitor with a constant current as well as a comparator. The time intervals can be in the range from 10 ns to$10 \mu ~\mathrm{s}$. With$\pm 3.3 ~\mathrm{V}$supply voltage, the power consumption of the complete circuits is between 1.1 mW and 4.55 mW depending on the LED emission and detection rate of the SPAD. After XOR-hashing, the NIST tests were passed.

DOI
10.1109/ddecs69233.2026.11521003

Related papers

A Monolithic Silicon Quantum Random Number Generator Based on Measurement of Photon Detection Time

Abbas Khanmohammadi, Reinhard Enne, Michael Hofbauer +1 more

In this paper, a nondeterministic random number generator based on detection of the single photons emitted by an Si-CMOS-LED light source integrated for the first time on the detector chip is presented and experimentally demonstrated. We use a ring-shaped single-photon avalanche diode (SPAD) around the Si-CMOS-LED fabricated in 0.35-μm HV-CMOS technology to generate random events. The time intervals between single-photon events are independent quantum random variables. A field-programmable gate array (FPGA) digitizes the time variables to the stream of random bits. Bias in the raw data due to the nonuniform distribution of the time intervals is removed by postprocessing in a special configuration of xor gates to improve the randomness of the generated random bits. The quantum random numbers in 1-Gb streams with bit generation rate of 1 Mb/s were directly delivered to a personal computer (PC) and passed all statistical tests from ENT, STS, and DIEHARD, as well as for more accuracy correlation and bias tests applied on these streams.

IEEE photonics journal•Sep 16, 2015•59 citations

Monolithically integrated optical random pulse generator in high voltage CMOS technology

Abbas Khanmohammadi, Reinhard Enne, Michael Hofbauer +1 more

A monolithically integrated optoelectronic device is realized in 0.35um high voltage CMOS technology. It consists of a ring shaped single-photon avalanche diode (SPAD) around a Si-CMOS-LED to generate random events. The LED-emitted photons transmit through the short distance between the Si-LED and SPAD and some of them can be detected by the SPAD. In this device, time intervals between single-photon events are independent quantum random variables. Experimental results show an increase of more than a factor of three in the photon counting rate compared to earlier reported results.

European Solid-State Device Research Conference•Sep 1, 2015•7 citations

A Fully Integrated Quantum Random Number Generator for Cryptographic Application

Nicola Massari, Luca Parmesan, Alessandro Tontini +7 more

A compact quantum random number generator (QRNG) based on an array of Single Photon Avalanche Diodes (SPADs) is presented here. The main feature of the proposed chip is the capability to generate random numbers without the use of any external source of light. In this view, SPADs are configured to be used in two ways: 1) as a controlled light emitter and 2) as a detector. An embedded logic is able to distinguish dark events against detected emitted photon in such a way to make the system sensitive only to the presence of light. The extracted random bits show a uniform distribution and the QRNG, thanks to an integrated conditioning block maximizing the output entropy, eventually passes all AIS31 tests. The average raw bit rate in the default device configuration (one enabled column) is measured equal to 800 kbps.

IEEE Transactions on Circuits and Systems I Regular Papers•Apr 16, 2026•0 citations

Generation of high quality random numbers via an all-silicon-based approach

Zahra Bisadi, Alessio Meneghetti, Alessandro Tomasi +6 more

A quantum random number generator (QRNG) based on a silicon nanocrystals (Si-NCs) light emitting device (LED) coupled with a silicon single photon avalanche photodiode (Si-SPAD) is presented. A simple setup is used for the generation of random bits. The modeled approach assures a negligible bias on datasets of 100 Mbits length. The raw data pass all the statistical tests in the National Institute of Standards and Technology (NIST) suite without any post-processing operations. The bit-rate of 0.6 Mbps is achieved. The information-theoretically provable randomness extractor of Toeplitz-hashing function is applied to longer datasets (1 Gbits) to extract the randomness, to minimize the bias, and consequently pass all the NIST tests. Stabilizing the temperature, resetting the applied current to the LED, or a feedback system can also be used as parameter control solutions to generate good quality, long datasets of random numbers suitable for cryptographic applications.

physica status solidi (a)•Aug 1, 2016•7 citations

Live Demonstration: A self-adapting randomness extractor for a monolithic QRNG

Andrea Bonzi, Nicola Massari, Luca Parmesan +4 more

This live demonstration shows a monolithic quantum random number generator (QRNG) fabricated in a 22-nm standard CMOS technology and based on the dark events generated by a Single-Photon Avalanche Diode (SPAD). The random number generator relies on a novel methodology for random bit extraction based on an on-the-fly median estimation of the inter-arrival times between consecutive events. Thanks to this self-adapting mechanism, the quality of the output sequence is kept constant regardless of the working conditions.

IEEE International Symposium on Circuits and Systems proceedings•May 24, 2026•0 citations

Design of a compact QRNG in 22nm standard CMOS technology

Andrea Bonzi, Nicola Massari, Luca Parmesan +5 more

In this work we present a quantum random number generator (QRNG) based on Single-Photon Avalanche Diodes (SPADs) implemented in 22-nm CMOS technology. A new approach for quantum random number generation is presented, based on the median estimation of the times between pulses defined by endogenous generation processes. The proposed methodology allows for a random number generation efficiency near to one, as well as randomly generated strings of bits that pass common randomness tests without the need for post-processing. Thanks to the use of standard CMOS technology for both the detection and the logic, our QRNG is suitable for a highly scalable solution.

IEEE International Symposium on Circuits and Systems proceedings•May 24, 2026•1 citation
This work describes a monolithically integrated photonic quantum random number generator (QRNG) in0.35μ m0.35 \mu ~\mathrm{m}0.35μ mCMOS. This QRNG consists of a light-emitting diode inside a deep N-well, a ring single-photon avalanche diode (SPAD), a fast cascoded active quenching and resetting circuit, and an analog evaluation circuit determining whether the random bit is a “0” or “1”. The random bits are created by comparison of two consecutive time intervals between photon detections using charging and discharging a capacitor with a constant current as well as a comparator. The time intervals can be in the range from 10 ns to10μ s10 \mu ~\mathrm{s}10μ s. With±3.3 V\pm 3.3 ~\mathrm{V}±3.3 Vsupply voltage, the power consumption of the complete circuits is between 1.1 mW and 4.55 mW depending on the LED emission and detection rate of the SPAD. After XOR-hashing, the NIST tests were passed.
In this paper, a nondeterministic random number generator based on detection of the single photons emitted by an Si-CMOS-LED light source integrated for the first time on the detector chip is presented and experimentally demonstrated. We use a ring-shaped single-photon avalanche diode (SPAD) around the Si-CMOS-LED fabricated in 0.35-μm HV-CMOS technology to generate random events. The time intervals between single-photon events are independent quantum random variables. A field-programmable gate array (FPGA) digitizes the time variables to the stream of random bits. Bias in the raw data due to the nonuniform distribution of the time intervals is removed by postprocessing in a special configuration of xor gates to improve the randomness of the generated random bits. The quantum random numbers in 1-Gb streams with bit generation rate of 1 Mb/s were directly delivered to a personal computer (PC) and passed all statistical tests from ENT, STS, and DIEHARD, as well as for more accuracy correlation and bias tests applied on these streams.
A monolithically integrated optoelectronic device is realized in 0.35um high voltage CMOS technology. It consists of a ring shaped single-photon avalanche diode (SPAD) around a Si-CMOS-LED to generate random events. The LED-emitted photons transmit through the short distance between the Si-LED and SPAD and some of them can be detected by the SPAD. In this device, time intervals between single-photon events are independent quantum random variables. Experimental results show an increase of more than a factor of three in the photon counting rate compared to earlier reported results.
A compact quantum random number generator (QRNG) based on an array of Single Photon Avalanche Diodes (SPADs) is presented here. The main feature of the proposed chip is the capability to generate random numbers without the use of any external source of light. In this view, SPADs are configured to be used in two ways: 1) as a controlled light emitter and 2) as a detector. An embedded logic is able to distinguish dark events against detected emitted photon in such a way to make the system sensitive only to the presence of light. The extracted random bits show a uniform distribution and the QRNG, thanks to an integrated conditioning block maximizing the output entropy, eventually passes all AIS31 tests. The average raw bit rate in the default device configuration (one enabled column) is measured equal to 800 kbps.
A quantum random number generator (QRNG) based on a silicon nanocrystals (Si-NCs) light emitting device (LED) coupled with a silicon single photon avalanche photodiode (Si-SPAD) is presented. A simple setup is used for the generation of random bits. The modeled approach assures a negligible bias on datasets of 100 Mbits length. The raw data pass all the statistical tests in the National Institute of Standards and Technology (NIST) suite without any post-processing operations. The bit-rate of 0.6 Mbps is achieved. The information-theoretically provable randomness extractor of Toeplitz-hashing function is applied to longer datasets (1 Gbits) to extract the randomness, to minimize the bias, and consequently pass all the NIST tests. Stabilizing the temperature, resetting the applied current to the LED, or a feedback system can also be used as parameter control solutions to generate good quality, long datasets of random numbers suitable for cryptographic applications.
This live demonstration shows a monolithic quantum random number generator (QRNG) fabricated in a 22-nm standard CMOS technology and based on the dark events generated by a Single-Photon Avalanche Diode (SPAD). The random number generator relies on a novel methodology for random bit extraction based on an on-the-fly median estimation of the inter-arrival times between consecutive events. Thanks to this self-adapting mechanism, the quality of the output sequence is kept constant regardless of the working conditions.
In this work we present a quantum random number generator (QRNG) based on Single-Photon Avalanche Diodes (SPADs) implemented in 22-nm CMOS technology. A new approach for quantum random number generation is presented, based on the median estimation of the times between pulses defined by endogenous generation processes. The proposed methodology allows for a random number generation efficiency near to one, as well as randomly generated strings of bits that pass common randomness tests without the need for post-processing. Thanks to the use of standard CMOS technology for both the detection and the logic, our QRNG is suitable for a highly scalable solution.