Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Intelligent modulation recognition for multi-band signals based on a broadband Rydberg-atom receiver

Shunli Han, Yingyun Zhang, Yizhen Pan, Guixiang Liu, Pengbo Jiang, Hongshuo Wang, Guangtai Xue, ChunSheng Xu, Jiwang Chai

Published May 15, 2026• 0 citations
Publisher

Abstract

The broadband characteristic of Rydberg atoms renders them suitable for spectrum monitoring in high-frequency and multi-band joint wireless communication systems. We demonstrate a cross-band spectrum monitoring system, integrating atomic sensing with intelligent recognition. The cross-band signals resonate with different Rydberg transitions, and are coherently mapped to a unified intermediate-frequency channel via atomic superheterodyne detection. This scheme enables simultaneous multi-band reception with no observable inter-band crosstalk. The system achieves real-time modulation recognition directly from atomically-sensed streams, using a lightweight automatic modulation recognition model on an embedded platform. We demonstrate that the system enables low error-vector-magnitude reception of high-order modulated signals. Moreover, the system maintains a recognition accuracy above 80% with low latency over a signal-to-noise ratio range from -15 dB to 20 dB. This unified framework provides a viable route toward scalable, quantum-enhanced intelligent sensing in complex electromagnetic environments.

DOI
10.1364/oe.598912

Related papers

Spectral fingerprint recognition of mobile signals via Rydberg atomic sensors

Yi-Ming Yin, Ming-Yao Cui, Ling-Yu Du +7 more

Rydberg-atom sensors have emerged as a promising quantum technology for broadband radio-frequency detection owing to their intrinsic calibration, wide frequency coverage, and high sensitivity. However, their potential for intelligent identification of real-world wireless signals remains largely unexplored. Here, we demonstrate a quantum-enabled framework for mobile signal classification based on Rydberg electromagnetically induced transparency spectroscopy and deep learning. Three types of wireless emissions, including cellular voice call, Wi-Fi, and 5G signals from three commercial smartphone brands, are measured to construct a spectral-fingerprint dataset. A convolutional neural network trained on this dataset achieves an initial baseline classification accuracy of 93.44\%. To compensate for spectral drifts induced by temporal and environmental variations, a progressive fine-tuning strategy is employed to continuously adapt the pretrained model, enabling robust classification across diverse deployment scenarios. Furthermore, continuous real-time monitoring is demonstrated under dynamically varying wireless conditions, including cellular voice call, Wi-Fi, and their coexistence. The proposed system achieves an overall frame-level recognition accuracy of 87.67\% over a 60-s measurement. These results establish a pathway toward intelligent quantum radio-frequency sensing and highlight the potential of Rydberg-atom platforms for real-time wireless signal awareness and spectrum monitoring.

quant-pharXiv:2610.35301•Oct 27, 2026•0 citations

Ultra-wide dual-band Rydberg atomic receiver based on space division multiplexing radio-frequency chip modules

Li-Hua Zhang, Bang Liu, Zong-Kai Liu +8 more

Detecting microwave signals over a wide frequency range has numerous advantages as it enables simultaneous transmission of a large amount of information, and access to more spectrum resources. This capability is crucial for applications such as microwave communication, remote sensing, and radar. However, conventional microwave receiving systems are limited by amplifiers and band-pass filters that can only operate efficiently in a specific frequency range. Typically, these systems can only process signals within a three-fold frequency range, which limits the data transfer bandwidth of the microwave communication systems. Developing novel atom-integrated microwave sensors, for example, radio frequency (RF)-chip coupled Rydberg atomic receiver, provides opportunities for a large working bandwidth of microwave sensing at the atomic level. Here, an ultra-wide dual-band RF sensing scheme is demonstrated by space-division multiplexing two RF-chip-integrated atomic receiver modules. The system can simultaneously receive dual-band microwave signals that span a frequency range exceeding 6 octaves (300 MHz and 24 GHz). This work paves the way for multi-band microwave reception applications within an ultra-wide range by RF-chip-integrated Rydberg atomic sensor.

arXiv:2404.09757•Chip•Apr 2, 2024•26 citations

Ultra-broadband anti-jamming communication via a Rydberg atomic receiver

Jia-Dou Nan, Junrong Chen, Bang Liu +11 more

Ultra-broadband anti-jamming communication can support secure information transfer through spread-spectrum techniques that resist interference and interception. Waveguide-coupled Rydberg atoms enable ultra-broadband spectrum sensing without conventional RF front-end components. This framework provides an experimental platform for ultra-wide anti-jamming communication. Here we demonstrate real-time signal demodulation based on frequency-hopping spread spectrum (FHSS) in a waveguide-coupled Rydberg receiver, achieving frequency hopping across 100 kHz to 20 GHz and a maximum hopping rate of 100 khop/s. Within the 2.4 GHz ISM band, our system achieves a channel density of ~ 8 channels per MHz. Beyond this, by leveraging its ultra-broad and continuous bandwidth, the system supports over 150,000 channels. Experimental results show a 51 dB improvement in narrowband interference tolerance compared with single-frequency systems, confirming its strong anti-jamming capability. The reported system demonstrates potential for secure communications based on quantum technology, particularly in complex electromagnetic environments. Conventional anti-jamming technologies such as frequency hopping spread spectrum often present complex implementations, motivating new approaches. Here, the authors demonstrate a Rydberg-atom-based receiver capable of ultra-wideband frequency hopping communication.

arXiv:2606.14497•Nature Communications•Aug 11, 2026•2 citations

Compressive Spectrum Sensing via Spectral Multiplexing in Rydberg Atomic Receiver

Jun-Rong Chen, Yi-Ming Yin, Le-Bin Chen +7 more

Rydberg-atomic receivers exhibit exceptional sensitivity yet are fundamentally constrained by the narrow instantaneous bandwidth, limiting their practical deployment in broadband scenarios. Prior approaches typically expand the bandwidth by physically broadening the atomic response, which usually requires auxiliary electromagnetic fields or stringent parameter tuning, thereby increasing overall system complexity. Here, we propose a compressive spectral multiplexing framework implemented in a waveguide-coupled Rydberg atomic receiver using a frequency-modulated local oscillator (FMLO). The FMLO creates multiple parallel sensing channels that collectively constitute a physical compressive sensing matrix, generating multiple narrowband intermediate-frequency replicas of the input signal. Thus, a broadband microwave spectrum is projected onto a set of narrowband atomic responses. It is demonstrated that spectral information spanning a bandwidth of over 640 MHz can be effectively compressed into the intrinsic atomic bandwidth of 126 kHz, achieving a spectrum compression ratio exceeding 1000. Furthermore, these output replicas offer intrinsic measurement redundancy and facilitate signal-to-noise ratio enhancement. An approximate 10 dB gain is achieved in the required bit-energy-to-noise-power-density ratio for multi-channel communication via maximal-ratio combining. This approach requires no auxiliary fields or broadband electronics, providing a simple and scalable pathway for chip-scale quantum receivers, latency-critical sensing, and next-generation wireless communications.

quant-pharXiv:2607.02001•Jul 3, 2026•2 citations

Reception of a Broadband Noise-Like Spread Spectrum Waveform Using a Rydberg Atom-Based Quantum RF Receiver

Hoang-Van Do, David Bair, Eric Bottomley +3 more

We present experimental results demonstrating broadband reception of a noise-like spread-spectrum waveform using a Rydberg atom-based quantum radio frequency (RF) receiver. The transmitted waveform occupies a 20 MHz bandwidth around a 2.5 GHz carrier and is intentionally engineered to exhibit noise-like spectral characteristics. To enable recovery of this broadband signal, the Rydberg sensor was configured to achieve sufficiently uniform sensitivity across intermediate frequencies up to 10 MHz (corresponding to a ±10 MHz signal band about the carrier, i.e., 20 MHz total bandwidth). Under these conditions, we demonstrate successful detection and recovery of noise-like spread-spectrum waveforms spanning a 20 MHz bandwidth. These results validate the feasibility of using atomic sensors for broadband RF waveform reception and highlight their potential in photonics-enabled RF sensing applications.

IEEE photonics journal•Apr 9, 2026•0 citations

Bandwidth Enhanced Rydberg Atomic Quantum Receivers for Wireless Communication and Sensing

Huizhi Wang, Tierui Gong, Emil Björnson +1 more

Rydberg atomic quantum receivers (RAQRs) have emerged as highly sensitive receivers for future communication and sensing systems. However, conventional RAQRs are primarily effective for single-carrier and narrowband reception, typically with an operational bandwidth of only a few hundred kilohertz. To enable the reception of multi-carrier signals with larger bandwidth, we propose a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) architecture based on a five-level quantum system model. We analyze the amplitude and phase of the output laser in MC-RAQR and extract the baseband electrical signal for signal processing. Furthermore, we quantify the performance of MC-RAQR in multi-carrier communication and sensing by studying the channel capacity and distance estimation, respectively. Numerical results show that the MC-RAQR is capable of achieving a bandwidth of $7.2$ MHz, which is an order of magnitude larger than conventional RAQRs. Besides, compared to conventional receivers, MC-RAQR can improve the capacity and distance estimation by $18$-fold and $10^3$-fold, respectively. This validates the superiority of MC-RAQR in receiving multi-carrier signal, and demonstrates its compatibility in detecting waveforms such as orthogonal frequency‐division multiplexing.

International Conference on Communications•May 24, 2026•0 citations
The broadband characteristic of Rydberg atoms renders them suitable for spectrum monitoring in high-frequency and multi-band joint wireless communication systems. We demonstrate a cross-band spectrum monitoring system, integrating atomic sensing with intelligent recognition. The cross-band signals resonate with different Rydberg transitions, and are coherently mapped to a unified intermediate-frequency channel via atomic superheterodyne detection. This scheme enables simultaneous multi-band reception with no observable inter-band crosstalk. The system achieves real-time modulation recognition directly from atomically-sensed streams, using a lightweight automatic modulation recognition model on an embedded platform. We demonstrate that the system enables low error-vector-magnitude reception of high-order modulated signals. Moreover, the system maintains a recognition accuracy above 80% with low latency over a signal-to-noise ratio range from -15 dB to 20 dB. This unified framework provides a viable route toward scalable, quantum-enhanced intelligent sensing in complex electromagnetic environments.
Rydberg-atom sensors have emerged as a promising quantum technology for broadband radio-frequency detection owing to their intrinsic calibration, wide frequency coverage, and high sensitivity. However, their potential for intelligent identification of real-world wireless signals remains largely unexplored. Here, we demonstrate a quantum-enabled framework for mobile signal classification based on Rydberg electromagnetically induced transparency spectroscopy and deep learning. Three types of wireless emissions, including cellular voice call, Wi-Fi, and 5G signals from three commercial smartphone brands, are measured to construct a spectral-fingerprint dataset. A convolutional neural network trained on this dataset achieves an initial baseline classification accuracy of 93.44\%. To compensate for spectral drifts induced by temporal and environmental variations, a progressive fine-tuning strategy is employed to continuously adapt the pretrained model, enabling robust classification across diverse deployment scenarios. Furthermore, continuous real-time monitoring is demonstrated under dynamically varying wireless conditions, including cellular voice call, Wi-Fi, and their coexistence. The proposed system achieves an overall frame-level recognition accuracy of 87.67\% over a 60-s measurement. These results establish a pathway toward intelligent quantum radio-frequency sensing and highlight the potential of Rydberg-atom platforms for real-time wireless signal awareness and spectrum monitoring.
Detecting microwave signals over a wide frequency range has numerous advantages as it enables simultaneous transmission of a large amount of information, and access to more spectrum resources. This capability is crucial for applications such as microwave communication, remote sensing, and radar. However, conventional microwave receiving systems are limited by amplifiers and band-pass filters that can only operate efficiently in a specific frequency range. Typically, these systems can only process signals within a three-fold frequency range, which limits the data transfer bandwidth of the microwave communication systems. Developing novel atom-integrated microwave sensors, for example, radio frequency (RF)-chip coupled Rydberg atomic receiver, provides opportunities for a large working bandwidth of microwave sensing at the atomic level. Here, an ultra-wide dual-band RF sensing scheme is demonstrated by space-division multiplexing two RF-chip-integrated atomic receiver modules. The system can simultaneously receive dual-band microwave signals that span a frequency range exceeding 6 octaves (300 MHz and 24 GHz). This work paves the way for multi-band microwave reception applications within an ultra-wide range by RF-chip-integrated Rydberg atomic sensor.
Ultra-broadband anti-jamming communication can support secure information transfer through spread-spectrum techniques that resist interference and interception. Waveguide-coupled Rydberg atoms enable ultra-broadband spectrum sensing without conventional RF front-end components. This framework provides an experimental platform for ultra-wide anti-jamming communication. Here we demonstrate real-time signal demodulation based on frequency-hopping spread spectrum (FHSS) in a waveguide-coupled Rydberg receiver, achieving frequency hopping across 100 kHz to 20 GHz and a maximum hopping rate of 100 khop/s. Within the 2.4 GHz ISM band, our system achieves a channel density of ~ 8 channels per MHz. Beyond this, by leveraging its ultra-broad and continuous bandwidth, the system supports over 150,000 channels. Experimental results show a 51 dB improvement in narrowband interference tolerance compared with single-frequency systems, confirming its strong anti-jamming capability. The reported system demonstrates potential for secure communications based on quantum technology, particularly in complex electromagnetic environments. Conventional anti-jamming technologies such as frequency hopping spread spectrum often present complex implementations, motivating new approaches. Here, the authors demonstrate a Rydberg-atom-based receiver capable of ultra-wideband frequency hopping communication.
Rydberg-atomic receivers exhibit exceptional sensitivity yet are fundamentally constrained by the narrow instantaneous bandwidth, limiting their practical deployment in broadband scenarios. Prior approaches typically expand the bandwidth by physically broadening the atomic response, which usually requires auxiliary electromagnetic fields or stringent parameter tuning, thereby increasing overall system complexity. Here, we propose a compressive spectral multiplexing framework implemented in a waveguide-coupled Rydberg atomic receiver using a frequency-modulated local oscillator (FMLO). The FMLO creates multiple parallel sensing channels that collectively constitute a physical compressive sensing matrix, generating multiple narrowband intermediate-frequency replicas of the input signal. Thus, a broadband microwave spectrum is projected onto a set of narrowband atomic responses. It is demonstrated that spectral information spanning a bandwidth of over 640 MHz can be effectively compressed into the intrinsic atomic bandwidth of 126 kHz, achieving a spectrum compression ratio exceeding 1000. Furthermore, these output replicas offer intrinsic measurement redundancy and facilitate signal-to-noise ratio enhancement. An approximate 10 dB gain is achieved in the required bit-energy-to-noise-power-density ratio for multi-channel communication via maximal-ratio combining. This approach requires no auxiliary fields or broadband electronics, providing a simple and scalable pathway for chip-scale quantum receivers, latency-critical sensing, and next-generation wireless communications.
We present experimental results demonstrating broadband reception of a noise-like spread-spectrum waveform using a Rydberg atom-based quantum radio frequency (RF) receiver. The transmitted waveform occupies a 20 MHz bandwidth around a 2.5 GHz carrier and is intentionally engineered to exhibit noise-like spectral characteristics. To enable recovery of this broadband signal, the Rydberg sensor was configured to achieve sufficiently uniform sensitivity across intermediate frequencies up to 10 MHz (corresponding to a ±10 MHz signal band about the carrier, i.e., 20 MHz total bandwidth). Under these conditions, we demonstrate successful detection and recovery of noise-like spread-spectrum waveforms spanning a 20 MHz bandwidth. These results validate the feasibility of using atomic sensors for broadband RF waveform reception and highlight their potential in photonics-enabled RF sensing applications.
Rydberg atomic quantum receivers (RAQRs) have emerged as highly sensitive receivers for future communication and sensing systems. However, conventional RAQRs are primarily effective for single-carrier and narrowband reception, typically with an operational bandwidth of only a few hundred kilohertz. To enable the reception of multi-carrier signals with larger bandwidth, we propose a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) architecture based on a five-level quantum system model. We analyze the amplitude and phase of the output laser in MC-RAQR and extract the baseband electrical signal for signal processing. Furthermore, we quantify the performance of MC-RAQR in multi-carrier communication and sensing by studying the channel capacity and distance estimation, respectively. Numerical results show that the MC-RAQR is capable of achieving a bandwidth of 7.27.27.2 MHz, which is an order of magnitude larger than conventional RAQRs. Besides, compared to conventional receivers, MC-RAQR can improve the capacity and distance estimation by 181818-fold and 10310^3103-fold, respectively. This validates the superiority of MC-RAQR in receiving multi-carrier signal, and demonstrates its compatibility in detecting waveforms such as orthogonal frequency‐division multiplexing.