Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Empirical Noise-Adaptive Circuit-Depth Thresholds on IBM Quantum Heron-Class Devices

Jeorge D. Anderson II

Published Jan 31, 2026• 0 citations
Publisher

Abstract

We present an empirical study of circuit-depth thresholds on IBM Quantum Heron-class hardware using 4- and 5-qubit GHZ-state preparation circuits with logical depths from 2 to 20. On ibm_torino, we observe qubit-count-dependent depth limits: 4-qubit circuits reach a fidelity plateau near 88% beyond depth 10, while 5-qubit circuits show continued decay from 89.4% to 83.7% over the same range. The observed fidelity at depth 20 substantially exceeds predictions from an independent gate-error model (88% vs. 61%), indicating coherent error effects and partial error cancellation not captured by simple accumulation models. These results provide hardware-specific depth bounds for near-term quantum circuits and support calibration-based depth selection over fixed heuristics. We recommend a maximum depth ≤ 10 for applications requiring >85% fidelity on this hardware.

DOI
10.5281/zenodo.20162807

Related papers

Noise-Field Sampling and Regime Transitions in Qubit Layout Selection: Hardware Evidence on IBM Superconducting Processors

Saripudi Suneetha, Kakumani K. C. Deepthi

Qubit layout selection determining which physical qubits a logical circuit occupies on a superconducting processor is fundamentally a noise-field sampling problem. On IBM Heron r1 and Heron r2 devices, two-qubit gate error varies by nearly one order of magnitude (7– $9\times $ ) across qubit pairs on the same chip, causing measured fidelity differences up to 0.903 from layout choice alone. We introduce the Gate Noise Sensitivity Index (GNSI), a calibration-weighted linear combination of per-qubit readout error and per-edge two-qubit gate error, derived analytically as a first-order approximation of circuit fidelity under independent, heterogeneous noise channels. For 12 backend–circuit combinations on three IBM processors (133-qubit Heron r1 and 156-qubit Heron r2), GNSI scores are computed for the full pool of 1,320 computationally enumerated candidate layouts; the top-ranked (GNSI-BEST) and bottom-ranked (GNSI-WORST) layouts are then executed on hardware. GNSI-BEST ranks first by score in all 12 instances (Hit@1 = 100% within the enumerated candidate pool) and consistently achieves higher measured fidelity than GNSI-WORST, with Spearman rank correlation $\rho = 0.926 \pm 0.016$ and statistically significant fidelity separation in 9 of 12 paired tests. Initial hardware comparisons on ibm_fez ( $n=5$ ) show GNSI-BEST matching or exceeding SABRE-selected fidelity. We further identify a depth-dependent regime transition: gate-error heterogeneity appears to govern ranking in shallow circuits (depth $\leq 15$ ), while qubit-specific $T_{1}$ variation may dominate for deeper circuits (depth $\geq 20$ ). The analytic regime boundary $d^{*}(b)$ , computable from calibration data alone, shows agreement within ±2 depth layers across all three backends in initial comparisons; GNSI-Extended incorporating the decoherence term receives an initial hardware comparison on two circuits, with full validation left to future work. These results suggest that layout-dependent fidelity variation may be governed by a calibration-predictable noise field, with direct implications for compiler design and noise-adaptive quantum circuit execution.

IEEE Access•Jan 1, 2026•0 citations

Limits of QAOA Depth Scaling on IBM Quantum Hardware for Fault Tree QUBOs

Devin Peters

The Quantum Approximate Optimization Algorithm (QAOA) is a leading candidate for near-term quantum advantage in combinatorial optimization. A central design parameter is circuit depth p, with theoretical analyses establishing asymptotic convergence under idealized conditions. This paper presents a limits study demonstrating that this theoretical relationship does not translate to measurable improvement on current noisy intermediate-scale quantum (NISQ) hardware for fault tree analysis applications. Across 120 QAOA executions on 60 QUBO-encoded fault tree instances (N ∈ {12, 16, 20, 24, 28, 32}) on IBM Quantum hardware (ibm_torino, 133-qubit Heron processor), circuit depths p = 1 and p = 2 were directly compared. The mean change in optimal state sampling probability from doubling circuit depth was Δmax_prob = 1.22 × 10⁻⁵ with a median Δ of zero. For 8,192 shots, the binomial sampling uncertainty is O(10⁻²); the observed mean delta is therefore approximately three orders of magnitude below the shot-noise scale, making the difference statistically indistinguishable from zero. Output distribution entropy approaches the theoretical maximum of log₂(8192) ≈ 13 bits, indicating hardware noise dominates algorithmic signal. These findings establish that for fault tree minimal cut set identification on current NISQ devices, computational resources are more effectively allocated to increased shot counts than to circuit depth. Complete experimental artifacts with SHA-256 verification are provided, enabling full reproducibility.

•Jan 18, 2026•0 citations

Fidelity Thresholds for QAOA Depth Benefits: A Noise-Scaled Simulation Study for Fault Tree QUBO Instances

Devin Peters

This paper presents a noise-scaled simulation study to characterize whether increased QAOA circuit depth provides measurable improvement for fault tree QUBO instances under varying two-qubit gate fidelity conditions. Using 60 fault tree instances with circuits loaded via QPY serialization, we executed 960 simulations spanning depths p = 1 and p = 2 across a fidelity sweep from F₂ = 0.900 to F₂ = 0.992, with fixed single-qubit fidelity F₁ = 0.9995 and readout fidelity Fro = 0.97. The primary finding is that output distributions are noise-dominated and shot-limited at all tested fidelity levels. Maximum probability values cluster near the shot floor of 1/1024, and Shannon entropy approaches the measurement ceiling of 10 bits. The median difference between depth p = 2 and depth p = 1 is exactly zero for maximum probability at all fidelity levels. No consistent improvement in distribution concentration is observed as fidelity increases within the tested range. These results establish that no depth benefit is detectable through F₂ = 0.992 under this noise model and shot budget. Practitioners should not expect depth scaling to improve output quality until gate fidelity exceeds the upper bound of this sweep. This completes the investigation arc from prior work: depth does not help on current hardware because noise accumulation exceeds algorithmic signal, and this finding persists through the tested fidelity range.

•Jan 26, 2026•0 citations

Self-Adaptive Quantum Circuits for NISQ Devices

PROF.JABEEN TAJ MK

Noisy Intermediate-Scale Quantum (NISQ) devices are promising platforms for practical quantum computing, but their performance is significantly affected by limited qubit availability, gate errors, decoherence, circuit depth, and hardware-dependent noise. Conventional quantum circuits are generally designed and optimized before execution and may not respond effectively to changing hardware conditions during computation. This research proposes a Self-Adaptive Quantum Circuit framework that dynamically modifies quantum circuits according to the current computational resources and noise characteristics of NISQ devices. The proposed framework monitors parameters such as qubit fidelity, gate error rates, circuit depth, execution time, and resource availability, and automatically selects suitable circuit configurations to improve computational performance. Adaptive mechanisms can be employed to reduce unnecessary gates, optimize qubit utilization, and mitigate the impact of hardware noise while maintaining the required computational accuracy. The framework will be evaluated using simulation platforms and available NISQ quantum hardware, comparing adaptive circuits with conventional static circuits using metrics such as accuracy, fidelity, circuit depth, gate count, execution time, and error rate. The expected outcome is a resource-efficient and noise-aware quantum circuit optimization approach capable of improving the reliability and performance of quantum applications on near-term quantum hardware. The proposed research aims to contribute toward more practical, flexible, and hardware-aware quantum computing systems for NISQ-era applications. Keywords: NISQ Computing, Self-Adaptive Quantum Circuits, Quantum Circuit Optimization, Quantum Error Mitigation, Quantum Noise, Quantum Computing.

JOURNAL OF ADVANCE AND FUTURE RESEARCH•Aug 1, 2026•0 citations

STRESS TESTING IBM_BRISBANE: Rapid Noise Saturation with Deep Random Circuits on 127 Qubits

Muhammad Sukri Bin Ramli

Abstract The practical utility of Noisy Intermediate-Scale Quantum (NISQ) processors depends critically on their performance under demanding computational loads. We investigated the impact of circuit depth on the 127-qubit superconducting processor ibm_brisbane by executing stress-test circuits utilizing all available qubits. These circuits consisted of repeated layers combining random single-qubit rotations and linear chains of Controlled-Z entangling gates. We systematically increased the ideal circuit depth from 1 up to 30 layers, resulting in transpiled circuits ranging from approximately 550 to over 15,000 gates (optimization level 2). Using the qiskit-ibm-runtime Sampler primitive with 4096 shots and default error mitigation, we successfully obtained results for ideal depths up to 22 (transpiled depth ~ 11.7k gates), beyond which platform usage limits prevented execution. Our central finding is the immediate onset of noise saturation: the output distribution reached maximum sample entropy (12.0 bits) and exhibited near-zero average single-qubit Z magnetization even at the shallowest depth tested (ideal depth 1, transpiled depth ~ 550). These noise-dominated characteristics persisted despite significant increases in transpiled circuit depth. This demonstrates that for these specific full-width, complex random circuits, noise overwhelms the computation almost instantaneously on this device under default settings, highlighting the profound challenge of achieving computational fidelity for deep, wide algorithms in the NISQ era without advanced error handling.

•Apr 24, 2025•0 citations

Emergent Effective Depth in Quantum Machine Learning: Empirical Gradient Attenuation Scaling in Noisy Variational Quantum Algorithms

Carlos Mario Braga, Manuel A. Serrano, Eduardo Fernández‐Medina

Noisy Intermediate-Scale Quantum (NISQ) devices impose structural constraints on the training of Variational Quantum Algorithms (VQAs). In the absence of full error correction, each quantum gate introduces a non-zero probability of error that accumulates with circuit depth, while gradient estimation through finite sampling adds additional statistical variability. As a result, convergence depends on a delicate balance between physical coherence and estimation variance. In this setting, the depth of the variational ansatz not only determines model expressivity, but also its operational feasibility under noise. Without an explicit characterization of the interaction between error accumulation, number of measurements (shots), and control strategies, increasing experimental resources may fail to improve performance and can even become counterproductive. In this work, we empirically analyze how circuit depth affects the practical signal of the gradient under depolarizing noise. Across multiple configurations ($q=4-7$qubits), we observe a pattern consistent with an effective exponential attenuation of the coherent gradient contribution, characterized by a per-layer rate$\epsilon_{\text{eff}}$. The estimated magnitude of$\epsilon_{\text{eff}}$depends on circuit complexity and remains largely independent of the measurement budget, indicating that it primarily reflects architectural and physical factors rather than sampling effects. The analysis of adaptive control strategies further suggests that accuracy gains are constrained by gradient attenuation, rather than scaling significantly with circuit depth. However, a crossmode comparison across three distinct training strategies reveals that, while accuracy improvements remain modest, adaptive perturbations substantially improve the statistical detectability of the attenuation signal, acting as diagnostic probes rather than mere optimization heuristics. Taken together, these results suggest that the usable depth of a variational ansatz can be interpreted as an emergent property of the effective signal-to-noise regime, governed by a measurable structural parameter whose ranking across circuit configurations is preserved independently of the training mode. This framework enables principled comparison of circuit architectures in terms of their effective trainability under noise, providing guidance for architectural and control design in Quantum Machine Learning under NISQ conditions.

IEEE International Conference on Quantum Software (QSW)•Jul 1, 2026•0 citations
We present an empirical study of circuit-depth thresholds on IBM Quantum Heron-class hardware using 4- and 5-qubit GHZ-state preparation circuits with logical depths from 2 to 20. On ibm_torino, we observe qubit-count-dependent depth limits: 4-qubit circuits reach a fidelity plateau near 88% beyond depth 10, while 5-qubit circuits show continued decay from 89.4% to 83.7% over the same range. The observed fidelity at depth 20 substantially exceeds predictions from an independent gate-error model (88% vs. 61%), indicating coherent error effects and partial error cancellation not captured by simple accumulation models. These results provide hardware-specific depth bounds for near-term quantum circuits and support calibration-based depth selection over fixed heuristics. We recommend a maximum depth ≤ 10 for applications requiring >85% fidelity on this hardware.
Qubit layout selection determining which physical qubits a logical circuit occupies on a superconducting processor is fundamentally a noise-field sampling problem. On IBM Heron r1 and Heron r2 devices, two-qubit gate error varies by nearly one order of magnitude (7– $9\times $ ) across qubit pairs on the same chip, causing measured fidelity differences up to 0.903 from layout choice alone. We introduce the Gate Noise Sensitivity Index (GNSI), a calibration-weighted linear combination of per-qubit readout error and per-edge two-qubit gate error, derived analytically as a first-order approximation of circuit fidelity under independent, heterogeneous noise channels. For 12 backend–circuit combinations on three IBM processors (133-qubit Heron r1 and 156-qubit Heron r2), GNSI scores are computed for the full pool of 1,320 computationally enumerated candidate layouts; the top-ranked (GNSI-BEST) and bottom-ranked (GNSI-WORST) layouts are then executed on hardware. GNSI-BEST ranks first by score in all 12 instances (Hit@1 = 100% within the enumerated candidate pool) and consistently achieves higher measured fidelity than GNSI-WORST, with Spearman rank correlation ρ=0.926±0.016\rho = 0.926 \pm 0.016ρ=0.926±0.016 and statistically significant fidelity separation in 9 of 12 paired tests. Initial hardware comparisons on ibm_fez ( n=5n=5n=5 ) show GNSI-BEST matching or exceeding SABRE-selected fidelity. We further identify a depth-dependent regime transition: gate-error heterogeneity appears to govern ranking in shallow circuits (depth ≤15\leq 15≤15 ), while qubit-specific T1T_{1}T1​ variation may dominate for deeper circuits (depth ≥20\geq 20≥20 ). The analytic regime boundary d∗(b)d^{*}(b)d∗(b) , computable from calibration data alone, shows agreement within ±2 depth layers across all three backends in initial comparisons; GNSI-Extended incorporating the decoherence term receives an initial hardware comparison on two circuits, with full validation left to future work. These results suggest that layout-dependent fidelity variation may be governed by a calibration-predictable noise field, with direct implications for compiler design and noise-adaptive quantum circuit execution.
The Quantum Approximate Optimization Algorithm (QAOA) is a leading candidate for near-term quantum advantage in combinatorial optimization. A central design parameter is circuit depth p, with theoretical analyses establishing asymptotic convergence under idealized conditions. This paper presents a limits study demonstrating that this theoretical relationship does not translate to measurable improvement on current noisy intermediate-scale quantum (NISQ) hardware for fault tree analysis applications. Across 120 QAOA executions on 60 QUBO-encoded fault tree instances (N ∈ {12, 16, 20, 24, 28, 32}) on IBM Quantum hardware (ibm_torino, 133-qubit Heron processor), circuit depths p = 1 and p = 2 were directly compared. The mean change in optimal state sampling probability from doubling circuit depth was Δmax_prob = 1.22 × 10⁻⁵ with a median Δ of zero. For 8,192 shots, the binomial sampling uncertainty is O(10⁻²); the observed mean delta is therefore approximately three orders of magnitude below the shot-noise scale, making the difference statistically indistinguishable from zero. Output distribution entropy approaches the theoretical maximum of log₂(8192) ≈ 13 bits, indicating hardware noise dominates algorithmic signal. These findings establish that for fault tree minimal cut set identification on current NISQ devices, computational resources are more effectively allocated to increased shot counts than to circuit depth. Complete experimental artifacts with SHA-256 verification are provided, enabling full reproducibility.
This paper presents a noise-scaled simulation study to characterize whether increased QAOA circuit depth provides measurable improvement for fault tree QUBO instances under varying two-qubit gate fidelity conditions. Using 60 fault tree instances with circuits loaded via QPY serialization, we executed 960 simulations spanning depths p = 1 and p = 2 across a fidelity sweep from F₂ = 0.900 to F₂ = 0.992, with fixed single-qubit fidelity F₁ = 0.9995 and readout fidelity Fro = 0.97. The primary finding is that output distributions are noise-dominated and shot-limited at all tested fidelity levels. Maximum probability values cluster near the shot floor of 1/1024, and Shannon entropy approaches the measurement ceiling of 10 bits. The median difference between depth p = 2 and depth p = 1 is exactly zero for maximum probability at all fidelity levels. No consistent improvement in distribution concentration is observed as fidelity increases within the tested range. These results establish that no depth benefit is detectable through F₂ = 0.992 under this noise model and shot budget. Practitioners should not expect depth scaling to improve output quality until gate fidelity exceeds the upper bound of this sweep. This completes the investigation arc from prior work: depth does not help on current hardware because noise accumulation exceeds algorithmic signal, and this finding persists through the tested fidelity range.
Noisy Intermediate-Scale Quantum (NISQ) devices are promising platforms for practical quantum computing, but their performance is significantly affected by limited qubit availability, gate errors, decoherence, circuit depth, and hardware-dependent noise. Conventional quantum circuits are generally designed and optimized before execution and may not respond effectively to changing hardware conditions during computation. This research proposes a Self-Adaptive Quantum Circuit framework that dynamically modifies quantum circuits according to the current computational resources and noise characteristics of NISQ devices. The proposed framework monitors parameters such as qubit fidelity, gate error rates, circuit depth, execution time, and resource availability, and automatically selects suitable circuit configurations to improve computational performance. Adaptive mechanisms can be employed to reduce unnecessary gates, optimize qubit utilization, and mitigate the impact of hardware noise while maintaining the required computational accuracy. The framework will be evaluated using simulation platforms and available NISQ quantum hardware, comparing adaptive circuits with conventional static circuits using metrics such as accuracy, fidelity, circuit depth, gate count, execution time, and error rate. The expected outcome is a resource-efficient and noise-aware quantum circuit optimization approach capable of improving the reliability and performance of quantum applications on near-term quantum hardware. The proposed research aims to contribute toward more practical, flexible, and hardware-aware quantum computing systems for NISQ-era applications. Keywords: NISQ Computing, Self-Adaptive Quantum Circuits, Quantum Circuit Optimization, Quantum Error Mitigation, Quantum Noise, Quantum Computing.
Abstract The practical utility of Noisy Intermediate-Scale Quantum (NISQ) processors depends critically on their performance under demanding computational loads. We investigated the impact of circuit depth on the 127-qubit superconducting processor ibm_brisbane by executing stress-test circuits utilizing all available qubits. These circuits consisted of repeated layers combining random single-qubit rotations and linear chains of Controlled-Z entangling gates. We systematically increased the ideal circuit depth from 1 up to 30 layers, resulting in transpiled circuits ranging from approximately 550 to over 15,000 gates (optimization level 2). Using the qiskit-ibm-runtime Sampler primitive with 4096 shots and default error mitigation, we successfully obtained results for ideal depths up to 22 (transpiled depth ~ 11.7k gates), beyond which platform usage limits prevented execution. Our central finding is the immediate onset of noise saturation: the output distribution reached maximum sample entropy (12.0 bits) and exhibited near-zero average single-qubit Z magnetization even at the shallowest depth tested (ideal depth 1, transpiled depth ~ 550). These noise-dominated characteristics persisted despite significant increases in transpiled circuit depth. This demonstrates that for these specific full-width, complex random circuits, noise overwhelms the computation almost instantaneously on this device under default settings, highlighting the profound challenge of achieving computational fidelity for deep, wide algorithms in the NISQ era without advanced error handling.
Noisy Intermediate-Scale Quantum (NISQ) devices impose structural constraints on the training of Variational Quantum Algorithms (VQAs). In the absence of full error correction, each quantum gate introduces a non-zero probability of error that accumulates with circuit depth, while gradient estimation through finite sampling adds additional statistical variability. As a result, convergence depends on a delicate balance between physical coherence and estimation variance. In this setting, the depth of the variational ansatz not only determines model expressivity, but also its operational feasibility under noise. Without an explicit characterization of the interaction between error accumulation, number of measurements (shots), and control strategies, increasing experimental resources may fail to improve performance and can even become counterproductive. In this work, we empirically analyze how circuit depth affects the practical signal of the gradient under depolarizing noise. Across multiple configurations (q=4−7q=4-7q=4−7qubits), we observe a pattern consistent with an effective exponential attenuation of the coherent gradient contribution, characterized by a per-layer rateϵeff\epsilon_{\text{eff}}ϵeff​. The estimated magnitude ofϵeff\epsilon_{\text{eff}}ϵeff​depends on circuit complexity and remains largely independent of the measurement budget, indicating that it primarily reflects architectural and physical factors rather than sampling effects. The analysis of adaptive control strategies further suggests that accuracy gains are constrained by gradient attenuation, rather than scaling significantly with circuit depth. However, a crossmode comparison across three distinct training strategies reveals that, while accuracy improvements remain modest, adaptive perturbations substantially improve the statistical detectability of the attenuation signal, acting as diagnostic probes rather than mere optimization heuristics. Taken together, these results suggest that the usable depth of a variational ansatz can be interpreted as an emergent property of the effective signal-to-noise regime, governed by a measurable structural parameter whose ranking across circuit configurations is preserved independently of the training mode. This framework enables principled comparison of circuit architectures in terms of their effective trainability under noise, providing guidance for architectural and control design in Quantum Machine Learning under NISQ conditions.