Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Quantum Communications, Networking, and Computing (QCNC)

FPGA Implementation of High-Speed LDPC Decoder with Cross-Layer Scheduling for CV-QKD

Hao Cheng, Weicheng Yu, Yong Chen, Genlong Chen, Yi Yang, Xueqin Jiang

Published Apr 6, 2026• 0 citations
Publisher

Abstract

This paper addresses the high-throughput requirements of information reconciliation in continuous-variable quantum key distribution (CV-QKD) systems by proposing an FPGA-based quasi-cyclic low-density parity-check (QC-LDPC) decoder implementation utilizing cross-layer scheduling. Through a preprocessing approach involving base matrix row reordering and data merging, the scheme effectively resolves memory access conflicts in layered decoding, enabling conflict-free parallel processing. Operating at 250 MHz, the decoder achieves a throughput of 100.5 Mbps, representing a 20% improvement over conventional approaches while maintaining equivalent frame error rate performance.

DOI
10.1109/qcnc69040.2026.00061

Related papers

A high-throughput and FPGA-based LDPC decoder for continuous-variable quantum key distribution system

Chuang Zhou, Li Yang, Li Ma +6 more

The throughput of error correction is one of the main bottlenecks of high-speed continuous variable quantum key distribution (CV-QKD) post-processing, which directly restricts the practical secret key rates (SKR). Implementing the decoder of low-density parity-check (LDPC) codes based on FPGA in limited precision can improve the decoding throughput significantly. In this paper, a high-throughput decoder architecture with limited precision for quasi-cyclic LDPC (QC-LDPC) codes is proposed. In particular, decoding of two typical LDPC codes, with code rates 0.2 and 0.1, for CV-QKD have been implemented on a commercial FPGA. The clock operates at 100 MHZ and the throughput of 1.44 Gbps and 0.78 Gbps is achieved, respectively, which can support 71.89 Mbps and 9.97 Mbps real-time SKR under transmission distance of 25 km and 50 km, respectively. The proposed architecture paves the way for high-rate real-time CV-QKD deployment in secure metropolitan area network.

SPIE Conference on Quantum and Nonlinear Optics•Oct 12, 2023•3 citations

FPGA Implementation of QC-LDPC Decoder with Rapid Cyclic Shifter for CV-QKD Systems

Zeyuan Jin, Yinghua Xie, Xueqin Jiang +1 more

In continuous variable quantum key distribution (CV-QKD) systems, low-density parity check (LDPC) decoders have gained widespread adoption due to their robust error correction capabilities and good adaptability to parallel processing hardware designs. We introduce a syndrome-based normalized min-sum algorithm (S-NMSA) and implement the decoder on FPGAs for high throughput and minimal resource consumption. The decoder utilizes a semi-parallel architecture. The proposed rapid cyclic shifter (RCS) can complete the shift of any dimension matrix in one clock cycle and realizes a significant reduction in hardware resource consumption. The semi-parallel decoding structure attains a 68.5 Mbps processing throughput on the condition that the system clock of the quasi-cyclic (QC) LDPC decoder is 250 Mhz.

International Conference on Communication, Image and Signal Processing (CCISP)•Nov 13, 2024•0 citations

High-throughput decoder of quasi-cyclic LDPC codes with limited precision for continuous-variable quantum key distribution systems

Chuang Zhou, Yang Li, Ma Li +7 more

More than Mbps secret key rate was demonstrated for continuous-variable quantum key distribution (CV-QKD) systems, but real-time postprocessing is not allowed, which is restricted by the throughput of the error correction decoding in postprocessing. In this paper, a high-throughput FPGA-based quasi-cyclic LDPC decoder is proposed and implemented to support Mbps real-time secret key rate generation for CV-QKD for the first time. A residual bit error correction algorithm is used to solve the problem of high frame errors rate (FER) caused by the limited precision of the decoder. Specifically, real-time high-speed decoding for CV-QKD systems with typical code rates 0.2 and 0.1 is implemented on a commercial FPGA, and two throughputs of 360.92Mbps and 194.65Mbps are achieved, respectively, which can support 17.97 Mbps and 2.48 Mbps real-time generation of secret key rates under typical transmission distances of 25km and 50km, correspondingly. The proposed method paves the way for high-rate real-time CV-QKD deployment in secure metropolitan area network.

arXiv:2207.01860•Jul 5, 2022•8 citations

High-throughput GPU layered decoder of quasi-cyclic multi-edge type low density parity check codes in continuous-variable quantum key distribution systems

Yang Li, Xiaofang Zhang, Yong Li +4 more

The decoding throughput during post-processing is one of the major bottlenecks that occur in a continuous-variable quantum key distribution (CV-QKD) system. In this paper, we propose a layered decoder to decode quasi-cyclic multi-edge type LDPC (QC-MET-LDPC) codes using a graphics processing unit (GPU) in continuous-variable quantum key distribution (CV-QKD) systems. As described herein, we optimize the storage methods related to the parity check matrix, merge the sub-matrices which are unrelated, and decode multiple codewords in parallel on the GPU. Simulation results demonstrate that the average decoding speed of LDPC codes with three typical code rates, i.e., 0.1, 0.05 and 0.02, is up to 64.11 Mbits/s, 48.65 Mbits/s and 39.51 Mbits/s, respectively, when decoding 128 codewords of length [Formula: see text] simultaneously without early termination.

arXiv:2004.09084•Scientific Reports•Sep 3, 2020•34 citations

A High Throughput H-QC LDPC Decoder

Yi-Hsing Chien, Mong‐Kai Ku

In this paper, design of a high throughput low-density parity-check (LDPC) decoder using overlapped message passing scheduling algorithm is presented. Regular hierarchical quasi-cyclic (H-QC) LDPC code is used in this design to provide good coding performance at long code length. The two-level regular H-QC LDPC code matrix structure is exploited to parallelize the row and column decoding operations. Our scheduling algorithm re-arranges these operations across iteration boundaries to avoid memory access conflicts. The memory requirement is reduced by half compared to pipelined decoders without scheduling. A (12288, 6144) LDPC decoder implemented in FPGA achieves 298 Mbps throughput performance.

IEEE International Symposium on Circuits and Systems proceedings•May 1, 2007•12 citations

An FPGA-Based LDPC Decoder With Ultra-Long Codes for Continuous-Variable Quantum Key Distribution

Shenshen Yang, Jianqiang Liu, Zhenguo Lu +3 more

In this paper, we propose a good decoding performance, low-complexity, and high-speed decoder architecture for ultra-long quasi-cyclic LDPC codes by using the layered sum-product decoding scheme. To reduce implementation complexity and hardware resource consumption, the messages in the iteration process are uniformly quantified and the function Ψ(x) is approximated with second-order functions. The decoder architecture improves the decoding throughput by using partial parallel and pipeline structures. A modified construction method of parity check matrices was applied to prevent read&write conflicts and achieve high-speed pipeline structure. The simulation results show that our decoder architecture has good performance at signal-to-noise ratios (SNRs) as low as -0.6 dB. We have implemented our decoder architecture on a Virtex-7 XC7VX690T field programmable gate array (FPGA) device. The implementation results show that the FPGA-based LDPC decoder can achieve throughputs of 108.64 Mb/s and 70.32 Mb/s at SNR of 1.0 dB when the code length is 262,144 and 349,952, respectively. The decoder can find useful applications in those scenarios that require very low SNRs and high throughputs, such as the information reconciliation of continuous-variable quantum key distribution.

IEEE Access•Jan 1, 2021•25 citations
This paper addresses the high-throughput requirements of information reconciliation in continuous-variable quantum key distribution (CV-QKD) systems by proposing an FPGA-based quasi-cyclic low-density parity-check (QC-LDPC) decoder implementation utilizing cross-layer scheduling. Through a preprocessing approach involving base matrix row reordering and data merging, the scheme effectively resolves memory access conflicts in layered decoding, enabling conflict-free parallel processing. Operating at 250 MHz, the decoder achieves a throughput of 100.5 Mbps, representing a 20% improvement over conventional approaches while maintaining equivalent frame error rate performance.
The throughput of error correction is one of the main bottlenecks of high-speed continuous variable quantum key distribution (CV-QKD) post-processing, which directly restricts the practical secret key rates (SKR). Implementing the decoder of low-density parity-check (LDPC) codes based on FPGA in limited precision can improve the decoding throughput significantly. In this paper, a high-throughput decoder architecture with limited precision for quasi-cyclic LDPC (QC-LDPC) codes is proposed. In particular, decoding of two typical LDPC codes, with code rates 0.2 and 0.1, for CV-QKD have been implemented on a commercial FPGA. The clock operates at 100 MHZ and the throughput of 1.44 Gbps and 0.78 Gbps is achieved, respectively, which can support 71.89 Mbps and 9.97 Mbps real-time SKR under transmission distance of 25 km and 50 km, respectively. The proposed architecture paves the way for high-rate real-time CV-QKD deployment in secure metropolitan area network.
In continuous variable quantum key distribution (CV-QKD) systems, low-density parity check (LDPC) decoders have gained widespread adoption due to their robust error correction capabilities and good adaptability to parallel processing hardware designs. We introduce a syndrome-based normalized min-sum algorithm (S-NMSA) and implement the decoder on FPGAs for high throughput and minimal resource consumption. The decoder utilizes a semi-parallel architecture. The proposed rapid cyclic shifter (RCS) can complete the shift of any dimension matrix in one clock cycle and realizes a significant reduction in hardware resource consumption. The semi-parallel decoding structure attains a 68.5 Mbps processing throughput on the condition that the system clock of the quasi-cyclic (QC) LDPC decoder is 250 Mhz.
More than Mbps secret key rate was demonstrated for continuous-variable quantum key distribution (CV-QKD) systems, but real-time postprocessing is not allowed, which is restricted by the throughput of the error correction decoding in postprocessing. In this paper, a high-throughput FPGA-based quasi-cyclic LDPC decoder is proposed and implemented to support Mbps real-time secret key rate generation for CV-QKD for the first time. A residual bit error correction algorithm is used to solve the problem of high frame errors rate (FER) caused by the limited precision of the decoder. Specifically, real-time high-speed decoding for CV-QKD systems with typical code rates 0.2 and 0.1 is implemented on a commercial FPGA, and two throughputs of 360.92Mbps and 194.65Mbps are achieved, respectively, which can support 17.97 Mbps and 2.48 Mbps real-time generation of secret key rates under typical transmission distances of 25km and 50km, correspondingly. The proposed method paves the way for high-rate real-time CV-QKD deployment in secure metropolitan area network.
The decoding throughput during post-processing is one of the major bottlenecks that occur in a continuous-variable quantum key distribution (CV-QKD) system. In this paper, we propose a layered decoder to decode quasi-cyclic multi-edge type LDPC (QC-MET-LDPC) codes using a graphics processing unit (GPU) in continuous-variable quantum key distribution (CV-QKD) systems. As described herein, we optimize the storage methods related to the parity check matrix, merge the sub-matrices which are unrelated, and decode multiple codewords in parallel on the GPU. Simulation results demonstrate that the average decoding speed of LDPC codes with three typical code rates, i.e., 0.1, 0.05 and 0.02, is up to 64.11 Mbits/s, 48.65 Mbits/s and 39.51 Mbits/s, respectively, when decoding 128 codewords of length [Formula: see text] simultaneously without early termination.
In this paper, design of a high throughput low-density parity-check (LDPC) decoder using overlapped message passing scheduling algorithm is presented. Regular hierarchical quasi-cyclic (H-QC) LDPC code is used in this design to provide good coding performance at long code length. The two-level regular H-QC LDPC code matrix structure is exploited to parallelize the row and column decoding operations. Our scheduling algorithm re-arranges these operations across iteration boundaries to avoid memory access conflicts. The memory requirement is reduced by half compared to pipelined decoders without scheduling. A (12288, 6144) LDPC decoder implemented in FPGA achieves 298 Mbps throughput performance.
In this paper, we propose a good decoding performance, low-complexity, and high-speed decoder architecture for ultra-long quasi-cyclic LDPC codes by using the layered sum-product decoding scheme. To reduce implementation complexity and hardware resource consumption, the messages in the iteration process are uniformly quantified and the function Ψ(x) is approximated with second-order functions. The decoder architecture improves the decoding throughput by using partial parallel and pipeline structures. A modified construction method of parity check matrices was applied to prevent read&write conflicts and achieve high-speed pipeline structure. The simulation results show that our decoder architecture has good performance at signal-to-noise ratios (SNRs) as low as -0.6 dB. We have implemented our decoder architecture on a Virtex-7 XC7VX690T field programmable gate array (FPGA) device. The implementation results show that the FPGA-based LDPC decoder can achieve throughputs of 108.64 Mb/s and 70.32 Mb/s at SNR of 1.0 dB when the code length is 262,144 and 349,952, respectively. The decoder can find useful applications in those scenarios that require very low SNRs and high throughputs, such as the information reconciliation of continuous-variable quantum key distribution.