We formulate stabilizer-code error correction as a code- and recovery-dependent transformation of the noise channel. For a fixed recovery map, syndrome projection produces a block-diagonal logical channel whose diagonal Pauli weights follow from code-induced error classes, with no physical Pauli twirl; concatenation is then iterated redistribution, with the dominant logical error guiding the next code. The bit-flip and phase-flip three-qubit codes with standard recoveries supply a closed-form benchmark, and logically inequivalent recoveries appear as a design degree of freedom for shaping the channel presented to the next decoder. For amplitude damping, the three-qubit rules select
C2(σ^y)C1(σ^x) and give
fl=1−O(γ2), with an ideal-gate crossover at
γc≈0.30 (
f=1−1.72755γ2) and a favorable gate-count comparison with the five-qubit code under the same assumptions. Correlated noise requires joint class statistics, whereas coherent noise retains intra-class coherences that make the same transformation usable in reverse as a tomographic fingerprint; there the companion work proves local identifiability from a rank certificate evaluated inside the parameter domain, classifies the sole permutation-symmetry ambiguity as structural at any chain length, and closes it with one two-qubit marginal channel. The construction remains an analytic benchmark, not a universal prescription for an inner code beneath a surface code.
Stabilizer-based simulation of quantum error-correcting codes typically relies on the Pauli-twirling approximation (PTA) to render non-Clifford noise classically tractable, but PTA can distort the behavior of physically relevant channels such as thermal relaxation. Physically accurate noise simulation is needed to train decoders and understand the noise suppression capabilities of quantum error correction codes. In this work, we develop an exact and stabilizer-compatible model of qubit thermal relaxation noise and show that the combined amplitude damping and dephasing channel admits a fully positive probability decomposition into Clifford operations and reset whenever
T2⩽T1. For
T2>T1, the resulting decomposition is negative, but allows a smaller sampling overhead versus independent channels. We further introduce an approximated error channel with reset that removes the negativity of the decomposition while achieving higher channel fidelity to the true thermal relaxation than PTA, and extend our construction to finite temperature relaxation. We apply the exact combined model to investigate large surface codes and bivariate bicycle codes on superconducting platforms with realistic thermal relaxation error. The differing logical performances across code states further indicate that noise-model-informed decoders will be essential for accurately capturing thermal-noise structure in future fault-tolerant architectures.
Superconducting transmon qubits form the backbone of today's leading quantum processors, where high field dispersive readout relies fundamentally on the shape and temporal structure of microwave control pulses. While transmon qubits offer improved robustness against charge noise, their performance is still strongly influenced by environmental coupling, particularly the Purcell effect and by the spectral characteristics of the readout pulses used for state preparation and logic operations. In this study, we present a rigorous comparative analysis of qubit coherence dynamics using measurement under four relevant configurations: a single-step rectangular pulse without Purcell decay, a single-step pulse subject to Purcell-induced relaxation, a two-step shaped pulse without Purcell effects, and a two-step shaped pulse incorporating Purcell decay. By solving the time-dependent Lindblad master equation for a three-level transmon system, we illustrate how readout pulse shaping and Purcell filtering independently and jointly influence qubit population dynamics, excited-state lifetime, and the final-state fidelity. The results demonstrate that two-step readout pulse shaping significantly improves coherence by suppressing overshoot and reducing higher-level population transfer, while the inclusion of Purcell mitigation further stabilizes the dynamics and enhances fidelity. The most notable observation is that the combined application of pulse shaping and Purcell filtering produces the most stable and highest fidelity qubit state discrimination. This unified perspective constitutes the central novelty of our work. Such a comparative framework, integrating pulse engineering with environmental decay modeling, has received limited explicit treatment in prior literature. The findings provide critical insights for optimizing both readout protocols and quantum hardware design in large scale superconducting quantum systems.
The interaction between a qubit and its environment can be engineered such that one error channel dominates over all others, resulting in noise bias. This property enables error correction codes to focus on the dominant error type, thereby significantly reducing the number of physical systems required for fault-tolerant quantum computation. However, engineering noise bias typically introduces complexity at the physical system level, which decreases its usefulness by limiting scalability. Here, we introduce and experimentally realize a noise-biased qubit in a standard transmon-readout resonator circuit, one of the most common superconducting architectures, by only adding a single microwave tone. We encode the qubit in the transmon
∣g⟩- and
∣f⟩-states, and engineer a frequency-selective gain channel that counteracts single-photon loss errors between the computational states. We demonstrate an order-of-magnitude enhancement in relaxation time compared to the
∣g⟩−∣e⟩ encoding, conceding only a factor-of-two decrease in the echo-coherence time. Furthermore, we show that this qubit is compatible with fast, high-fidelity operations. Our results open a path towards using this system as a simple building-block for hardware-efficient quantum error detection and correction schemes.
Abstract Fabrication-induced variation in Josephson junction parameters ---shunt capacitance~
C, normal-state resistance~$\RN$, and superconducting gap~$\Dgap$---introduces uncertainty in transmon qubit frequencies and leads to residual
ZZ crosstalk that limits multi-qubit gate fidelity. This work presents a quantitative, end-to-end simulation framework that maps junction-level disorder to GHZ state fidelity in a three-qubit fixed-coupling transmon array. Five concrete results are obtained. (1)~An analytic pipeline is constructed linking $(C,\RN,\Dgap)$ to qubit frequency
ω01 and detuning
Δ, enabling direct propagation of fabrication noise into gate-level error rates. (2)~Monte Carlo analysis with 2\% parameter variation shows that normal-state resistance dominates detuning uncertainty, producing
σΔ=0.113\,GHz---approximately
1.4× larger than variations from
C or $\Dgap$. (3)~Two error models are implemented and compared: a probabilistic depolarizing model and a coherent
ZZ model using the anharmonicity-corrected dispersive shift
ζZZ=g2(1/Δ−1/(Δ+α)). Because Model 1 encodes only the \emph{magnitude} of the coupling-induced error while Model 2 encodes its \emph{signed, oscillatory phase}, the two models are not interchangeable estimates of the same quantity: their predictions diverge by up to
∣ΔF∣≈0.66 in GHZ fidelity near the boundary of the perturbation-validity exclusion zone, with Model 2 alone capturing the periodic revivals in fidelity that a magnitude-only stochastic model cannot represent by construction. (4)~The coherent model identifies the breakdown of second-order perturbation theory at
Δ≈∣α∣=0.248\,GHz, which, combined with fabrication-induced detuning spread, yields a conservative model-avoidance region
Δ∈[0.02,0.47]\,GHz within which non-perturbative treatment is required for quantitative characterization. (5)~Model-selection guidance is established: the probabilistic model provides a conservative bound for threshold estimation, while the coherent model is required for accurate hardware characterization and mitigation design. Finally, the framework is structured to allow systematic extension to more realistic noise channels, including leakage, correlated fabrication disorder, and non-perturbative multilevel dynamics, providing a pathway toward experimentally validated device-level error modeling.
In the companion paper (Part I), we developed an optimal-control framework to suppress intrinsic and decoherence-induced errors in controlled-Z (CZ) gates between directly coupled, frequency-tunable transmons. Here, we extend this framework to incorporate uncertainties in coupling strength, anharmonicities, and zero-flux qubit frequencies, enabling the design of high-fidelity gates robust against noise and parameter uncertainties. We classify these uncertainties by whether they perturb the off-diagonal coupling strengths or the diagonal detunings of the Hamiltonian, and we identify distinct suppression mechanisms for each class. Coupling errors are mitigated through dynamical decoupling induced by strong detuning modulation. For a 30-ns gate, this strategy reduces the coupling error to
6.21×10−7 and tolerates coupling-strength uncertainties up to
2π×4 MHz while keeping total gate infidelity below
10−3. Detuning errors are minimized near a symmetric-detuning operating point that balances the two dominant leakage-mediated interactions. A 24-ns gate operated near this point tolerates individual uncertainties of up to
2π×5 MHz in each relevant diagonal parameter under the same infidelity threshold. We further optimize gate performance under realistic conditions where intrinsic errors, decoherence, and parameter uncertainties coexist across six representative stages of progressively improving hardware performance. The resulting stage-specific controls achieve lower infidelity and greater robustness. Together with the companion study (Part I), this framework offers a practical approach to balance speed, fidelity, and robustness while reducing the need for exhaustive characterization and frequent recalibration in large-scale superconducting quantum processors.