Trapped-ion quantum computing relies on lasers and optical setups for state preparation, quantum gate operation and measurement. However, these setups are complex, and the conventional piece wise set up often hinders the rapid progress of the field. Here, we present a fully modular and programmatically designed system for AMO experiments. The system generates modular baseplates which act as building blocks of different optical sub systems. We have used it to build optical subsystems for applications like Doppler Cooling, laser locking, and quantum gate operations. It also includes an external cavity diode laser (ECDL) that is low-cost, minimally machined, where the only machined component is defined by two parameters: wavelength and grating number and can be made using 3D printer. It has been used to demonstrated Doppler-free spectrum of Rb at 421.6 nm. The ECDL shows stable frequency locking for over an hour with a tunability range exceeding 4.6 THz. The system was further used for successful Doppler cooling and detection of Sr88+ ions. Finally, we have used it to do single qubit gate for Sr88+ trapped ion. We have done Raman transition of Zeeman qubit with two slightly detuned lasers (16.8MHz apart) from the same ECDL. Our result shows 99.9% gate fidelity for single qubit operation and magnetic field noise limited coherence times of 550 µs.
Trapped-ion quantum computing relies on lasers and optical setups for state preparation, quantum gate operation and measurement. However, these setups are complex, and the conventional piece wise set up often hinders the rapid progress of the field. Here, we present a fully modular and programmatically designed system for AMO experiments. The system generates modular baseplates which act as building blocks of different optical sub systems. We have used it to build optical subsystems for applications like Doppler Cooling, laser locking, and quantum gate operations. It also includes an external cavity diode laser (ECDL) that is low-cost, minimally machined, where the only machined component is defined by two parameters: wavelength and grating number and can be made using 3D printer. It has been used to demonstrated Doppler-free spectrum of Rb at 421.6 nm. The ECDL shows stable frequency locking for over an hour with a tunability range exceeding 4.6 THz. The system was further used for successful Doppler cooling and detection of Sr88+ ions. Finally, we have used it to do single qubit gate for Sr88+ trapped ion. We have done Raman transition of Zeeman qubit with two slightly detuned lasers (16.8MHz apart) from the same ECDL. Our result shows 99.9% gate fidelity for single qubit operation and magnetic field noise limited coherence times of 550 µs.
We report on the implementation of a high fidelity universal gate-set on optical qubits based on trapped 88 Sr + ions for the purpose of quantum information processing. All coherent operations were performed using a narrow linewidth diode laser. We employed a master-slave configuration for the laser, where an ultra low expansion glass Fabry–Perot cavity is used as a stable reference as well as a spectral filter. We characterized the laser spectrum using the ions with a modified Ramsey sequence which eliminated the affect of the magnetic field noise. We demonstrated high fidelity single qubit gates with individual addressing, based on inhomogeneous micromotion, on a two-ion chain as well as the Mølmer–Sørensen two-qubit entangling gate.
Quantum computers offer great potential for significant speedup in executing certain algorithms compared to their classical counterparts. One of the most promising physical systems in which implementing such a device seems viable are trapped atomic ions. All of the fundamental operations needed for quantum information processing have already been experimentally demonstrated in trapped ion systems. Today, the remaining two obstacles are to improve the fidelities of these operations up to the point where quantum error correction techniques can be successfully applied, as well as to scale up the present systems to a higher number of quantum bits (qubits). This thesis addresses both issues. On the one hand, it decribes the experimental implementation of a high-fidelity two-qubit quantum logic gate, which is the most technically demanding fundamental operation to realise in practice. On the other hand, the presented work is carried out in a microfabricated surface ion trap – an architecture that holds the promise of scalability. The gate is applied directly to hyperfine "atomic clock" qubits in 43Ca+ ions using the near-field microwave magnetic field gradient produced by an integrated trap electrode. To protect the gate against fluctuating energy shifts of the qubit states, as well as to avoid the need to null the microwave field at the position of the ions, a dynamically decoupled Mølmer-Sørensen scheme is employed. After accounting for state preparation and measurement errors, the achieved gate fidelity is 99.7(1)%. In previous work, the same apparatus has been used to demonstrate coherence times of T*2 ≈ 50 s and all single-qubit operations with fidelity > 99.95%. To gain access to the "atomic clock" qubit transition in 43Ca+, a static magnetic field of 146G is applied. The resulting energy level Zeeman-structure is spread over many times the linewidth of the atomic transition used for Doppler cooling. This thesis presents a simple and robust method for Doppler cooling and obtaining high fluorescence from this qubit in spite of the complicated level structure. A temperature of 0.3mK, slightly below the Doppler limit, is reached.
Complex optical design is hindered by conventional piecewise setup, which prevents modularization and therefore abstraction of subsystems at the circuit level. This limits multiple fields that require complex optics systems, including quantum computing with atoms and trapped ions, because their optical systems are not scalable. We present an open-source Python library for optical layout (PyOpticL) which uses beam-path simulation and dynamic beam-path routing for quick and easy optical layout by placing optical elements along the beam path without a priori specification, enabling adaptive, path-based layouts with automatic routing and connectivity. We use PyOpticL to create modular `drop-in' optical baseplates for common optical subsystems used in atomic and molecular optics (AMO) experiments including laser sources, frequency and intensity modulation, and locking to an atomic reference for stabilization. We demonstrate this minimal working example of a dynamic full laser system for strontium trapped ions by using it for laser cooling, qubit state detection, and over 99% fidelity single-qubit gates with 3D printed baseplates. This enables a new paradigm of design abstraction layers for engineering optical systems leveraging modular baseplates, as they can be used for any wavelength in the system and enables scaling up the underlying optical systems for quantum computers. This new open-source hardware and software code-to-CAD library seeks to foster open-source collaborative hardware and systems design across numerous fields of research including AMO physics and quantum computing with neutral atoms and trapped ions.
The trapped atomic ion qubits feature desirable properties for use in a quantum computer such as long coherence times, high qubit readout fidelity, and universal logic gates. While these essential properties have been demonstrated, the ability to scale a trapped ion quantum system has not yet been shown. The challenge of scaling the system calls for methods to realize high-fidelity logic gates in scalable trap structures. Surface electrode ion traps, that are microfabricated from a silicon substrate, provide a scalable platform for trapping ion qubits only if high-fidelity operations are achievable in these structures. Here, we present a system for trapping and manipulating ions in a scalable surface trap. Trapping times exceeding 20 minutes without laser cooling, and heating rates as low as 0.8 quanta/ms indicate stable trapping conditions in these microtraps. Coherence times of more than one second verify adequate qubit and control field stability. We demonstrate low-error single-qubit gates performed using stimulated Raman transitions driven by lasers that are tightly focused on the ion qubit. Digital feedback loops are implemented to control the driving field's amplitude and frequency. Gate errors are measured using a randomized benchmarking protocol for single qubit gates, where residual amplitude error in the control beam is compensated using various pulse sequence techniques. Using pulse compensation, we demonstrate single qubit gates with an average error per randomized Clifford group gate of 3.6(3)times10−4, which is below the fault-tolerant threshold for some error-correction schemes.
Trapped ions are a leading technology for quantum computing, but their reliance on bespoke tabletop laser and optical systems remains a major obstacle to scaling and robustness. Integrated silicon nitride lasers, compatible with future monolithic integration with surface electrode ion traps, have recently demonstrated frequency-selective qubit state preparation and measurement as well as interrogation of an optical clock transition. However, coherent qubit gates impose even more stringent requirements on laser phase noise, and their implementation with integrated laser sources has remained an outstanding challenge. Here, we use a visible-wavelength integrated Brillouin laser stabilized to an integrated coil resonator to drive coherent single- and two-qubit gates with \Sr optical qubits. We measure an average single-qubit fidelity of 99.61%±0.03% per Clifford gate with randomized benchmarking and use a two-qubit Mølmer-Sørensen interaction to generate an entangled Bell state with a fidelity of 92.35%±1.50%. The qubit exhibits a bare Ramsey coherence time of 659±9μs, more than a tenfold improvement over our previous implementation, which extends to 1.750±0.033~ms with an echo. These results demonstrate, for the first time, that integrated visible-wavelength narrow-linewidth photonic lasers can meet the phase-noise requirements for coherent quantum logic with trapped ion optical qubits, providing a path for scalable optical systems integrated within trapped ion quantum processors.
Trapped-ion systems are leading candidates for quantum computing, offering long coherence times and high-fidelity gate operations. Scaling them, however, requires advanced capabilities such as mid-circuit measurement, qubit reset, and cooling, which together enable quantum error correction. One approach is the use of mixed qubit types, for example employing different ion species for cooling and computation. Recently, the omg blueprint [1] has gained attention as a method for coherently converting between qubit types within a single ion species, removing the overhead of mixed-species architectures while retaining their flexibility. In this thesis, we realise mixed qubit types in 137Ba+ using optical and metastable qubits. We demonstrate coherent control of both, as well as their coherent interconversion, achieving error rates at the 10−4 level suitable for NISQ applications. To enable selective control in multi-ion chains, we integrate a novel photonic chip for individual addressing of Raman beams [2]. We achieve cross-talk levels at or below 10−3 across all zones, and as low as 10−5 in some cases, establishing the scalability of our approach. Building on this, we present a new protocol for heralded state preparation and measurement (SPAM) [3]. This approach combines high-fidelity measurement with coherent conversion between qubit types to mitigate errors associated with qubit loss, decay, and imperfect SPAM. We demonstrate record-low SPAM error rates across optical, metastable, and ground-state qubits, with a minimum of 5(4)×10−6. This protocol can be integrated with erasure conversion techniques to enable in-sequence qubit loss correction, providing a pathway to scalable error correction even with finite qubit lifetimes. Finally, we introduce two-qubit operations through an implementation of the optical-transition dipole force (OTDF) gate [4]. This is the first implementation of the OTDF gate in 137Ba+, or in any ion with hyperfine structure, and it is directly compatible with our existing 532 nm laser system. Crucially, this gate operates in the σZ basis, avoiding the need for phase coherence between the driving field and the qubit, making it an excellent candidate for use in mixed-qubit-type systems. These results demonstrate the application of mixed-qubit-type architectures within a single ion species and establish a foundation for scaling trapped-ion quantum computers.