State-of-the-art superconducting qubits rely on a limited set of thin-film materials. Expanding their materials palette can improve performance, extend operating regimes, and introduce new functionalities, but conventional thin-film fabrication hinders systematic exploration of new material combinations. Van der Waals (vdW) materials offer a highly modular crystalline platform that facilitates such exploration while enabling gate-tunability, higher-temperature operation, and compact qubit geometries. Yet it remains unknown whether a fully vdW superconducting qubit can support quantum coherence and what mechanisms dominate loss at both low and elevated temperatures in such a device. Here we demonstrate quantum-coherent merged-element transmons made entirely from vdW Josephson junctions. These first-generation, fully crystalline qubits achieve microsecond lifetimes in an ultra-compact footprint without external shunt capacitors. Energy relaxation measurements, together with microwave characterization of vdW capacitors, point to dielectric loss as the dominant relaxation channel up to hundreds of millikelvin. These results establish vdW materials as a viable platform for compact superconducting quantum devices.
Abstract Ultra low-loss microwave materials are crucial for enhancing quantum coherence and scalability of superconducting qubits. Van der Waals (vdW) heterostructure is an attractive platform for quantum devices due to the single-crystal structure of the constituent two-dimensional (2D) layered materials and the lack of dangling bonds at their atomically sharp interfaces. However, new fabrication and characterization techniques are required to determine whether these structures can achieve low loss in the microwave regime. Here we report the fabrication of superconducting microwave resonators using NbSe2 that achieve a quality factor Q > 105. This value sets an upper bound that corresponds to a resistance of ⩽ 192 μ Ω when considering the additional loss introduced by integrating NbSe2 into a standard transmon circuit. This work demonstrates the compatibility of 2D layered materials with high-quality microwave quantum devices.
Advances in solid-state physics, materials science, and device engineering have accelerated the development of superconducting qubits. Among emerging platforms, van der Waals (vdW) materials and their heterostructures are potentially attractive building blocks for quantum devices, yet their realization in qubit architectures remains largely underexplored. Here we report an all-vdW superconducting qubit based on a NbSe
2-hBN-NbSe
2 junction, in which a thin hBN layer simultaneously provides Josephson coupling and capacitive shunting between two NbSe
2 islands, forming a "merged-element" transmon. Temporal characterization using circuit quantum electrodynamics (cQED) techniques yields an average energy-relaxation time
T1,avg=55 μs, Hahn-echo coherence time
T2E,avg=21 μs, and Ramsey coherence time
T2R,avg=1.9 μs. The relatively low Ramsey time is primarily attributable to an enhanced sensitivity to charge noise consistent with the realized device parameters and not a fundamental limitation. These results show that lumped-element superconducting qubits based on vdW heterostructures can achieve coherence times comparable to those of conventional Al-AlO
x-Al qubits, while offering a reduced device footprint and suppressed stray capacitive coupling.