Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Kohinaisten kvanttisimulaatioalgoritmien resurssivaatimuksien vertailu Tavis–Cummings-mallilla

Alisa Haukisalmi

Published Jan 23, 2024• 0 citations
OpenAlex

Abstract

Fault-tolerant quantum computers could facilitate the simulation of quantum systems unfeasible for classical computation via Trotterization, a systematic way of implementing time-evolution operators of qubit Hamiltonians as quantum circuits. Pre-fault-tolerance, however, one must make do with noisy intermediate-scale quantum (NISQ) devices, which cannot by themselves manage the deep circuits required by Trotterization. The utilisation of NISQ devices then calls for the use of additional strategies, which include quantum error mitigation (QEM) for alleviating device noise, and variational quantum algorithms (VQAs) which combine classical optimization with short-depth, parameterized quantum circuits. This thesis compares two such methods: zero-noise extrapolation (ZNE) with noise amplification by circuit folding, and incremental structural learning (ISL), a type of circuit recompiling VQA. These are applied to Trotterized time-evolution of the Tavis–Cummings model (TCM) under a noise simulation. Since both methods add circuit evaluation overhead, it is of interest to see how they compare both in the accuracy of the dynamics they produce, and in terms of the quantum resources used. Additionally, noisy recompilation of time-evolution circuits with ISL has not previously been explored. The comparison is done for various simulation parameters, such as the TCM system size. We find that while ISL achieves lower error than ZNE for smaller system sizes, it fails to produce correct dynamics for 4 qubits, where ZNE is superior. Diverging resource requirements for ISL and ZNE are observed, with ISL achieving low circuit depths at the cost of a large number of circuit evaluations. These results highlight the importance of considering the performance of VQAs under noisy conditions as well.

Related papers

Noisy quantum simulation: Performance and resource considerations for the Tavis-Cummings and Heisenberg models

Alisa Haukisalmi, Daniel Paz Ramos, Matti Raasakka +3 more

Fault-tolerant quantum computers promise the simulation of complex quantum systems beyond the reach of classical computation. In contrast, current noisy intermediate-scale quantum devices are constrained by hardware noise. Consequently, quantum simulation methods remain limited in their near-term applicability. Two prominent techniques addressing these challenges are zero-noise extrapolation (ZNE) and incremental structural learning (ISL). In this work, ZNE and ISL are benchmarked for simulating the Trotterized time evolution of two models: the Tavis-Cummings model (TCM) and the Heisenberg spin chain (HSC), using a classically simulated noisy hardware backend. The methods are evaluated on the basis of the accuracy of expectation values relative to noiseless simulations and their resource demands such as circuit depths and shot counts. The impact of noise on optimization routines in ISL, previously underexplored, is also investigated. Results indicate that ISL performs more favorably in HSC systems, consistently surpassing ZNE in expectation value accuracy. Conversely, for the TCM, ISL generally yields lower accuracies despite reduced Trotter circuit depths, with weak interactions often leading to pronounced phase lags or flat expectation curves. Notably, when performing ISL optimization under noiseless conditions, the protocol is generally able to reduce dephasing errors, but average accuracies still vary on the simulated Hamiltonian. Our findings highlight the sensitivity of quantum simulation protocols to the structure of the Hamiltonian encoding system dynamics. Trends across systems suggest that ISL optimization benefits from Trotter circuits with stronger interactions, and that ansatz construction favors isotropic couplings. Moreover, although ISL introduces approximation errors, it demonstrates greater robustness than ZNE in systems with deeper Trotter circuits.

arXiv:2402.16692•Physical Review Research•Nov 10, 2025•1 citation

Error-Mitigated Hamiltonian Simulation: Complexity Analysis and Optimization for Near-Term and Early-Fault-Tolerant Quantum Computers

Keisuke Murota, Synge Todo, Suguru Endo

Simulating real-time dynamics under a Hamiltonian is a central goal of quantum information science. While numerous Hamiltonian-simulation quantum algorithms have been proposed, the effects of physical noise have rarely been incorporated into their performance analysis, despite the non-negligible noise levels of quantum devices. We present an end-to-end complexity analysis of noisy Hamiltonian simulation combined with quantum error mitigation (QEM) to answer how many circuit runs are required to reach a given target accuracy. Because the QEM sampling overhead grows exponentially with the circuit depth while the algorithmic error decreases with it, the circuit depth becomes an optimization variable, and we derive an analytic depth-selection rule for two algorithm families. For the order-$k$ Suzuki--Trotter formula, the optimized cost exhibits a critical error $ε_c$, below which the required number of circuit runs grows exponentially. QEM improves the noise dependence of $ε_c$ from sublinear to $k$th-power scaling, an exponent improvement by a factor of $k+1$. For randomized-LCU-based simulation, optimizing the repetition number yields a square-root improvement in the simulation-time dependence of the sampling-overhead exponent over the standard parameter choice. We further quantify the noise-characterization cost required for error mitigation via gate set tomography and the recently proposed space-time noise inversion method, showing that the latter can significantly reduce this cost.

quant-pharXiv:2603.11527•Mar 13, 2026•1 citation

Comparing Zero-Noise Extrapolation Models on a 6-Qubit Grover's Algorithm

Prajwal Avadhani

Quantum computers have the potential to address computational problems beyond the practical capabilities of classical systems, but Noisy Intermediate-Scale Quantum (NISQ) processors remain limited by errors that accumulate during circuit execution. Quantum Error Mitigation (QEM), particularly Zero-Noise Extrapolation (ZNE), offers a way to reduce these errors without requiring additional physical qubits. However, ZNE has been studied extensively in relatively small or shallow circuits, leaving its effectiveness in deep, non-variational algorithms less explored. This project investigates whether combining readout mitigation and ZNE can mitigate errors in a deep, six-qubit Grover's search algorithm. The circuit was compiled onto IBM's 133-qubit FakeTorino simulated backend, reaching a depth of 1,118 and containing 369 entangling gates. Under simulated noise, the unmitigated probability of measuring the target state was 3.36%, compared with a uniform random-guessing probability of 1.5625%. Digital unitary gate folding and readout error mitigation were subsequently applied across four progressively increased noise-scaling sets (S1–S4), and scale factors. Four extrapolation models (Linear, Quadratic, Poly-Exponential, and Padé) were evaluated. The Poly-Exponential model achieved the highest average target-state probability, reaching 6.91% at S4, approximately 2.06 times the unmitigated probability. These results demonstrate that combining readout mitigation with ZNE can partially recover computational signals in deep quantum circuits under simulated hardware noise, suggesting the potential combined error mitigation techniques for improving the reliability of near-term quantum algorithms without active quantum error correction.

•Nov 13, 2026•0 citations

Virheenvähennysmenetelmiä digitaalisen kvanttisimulaation näkökulmasta

Aino Suomi

Quantum technology is a rapidly growing field; in the near future, quantum computers may be able to solve computationally complex problems that currently cannot be realistically solved by a classical computer. Digital quantum simulation is one such potential applications. Simulating the behavior of quantum mechanical systems, such as molecules, with a quantum computer is possible in polynomial time. Running the same computation with a classical computer would take an amount of time exponentially scaling with the size of the problem. Being able to obtain error free results of such simulations on a quantum computer could make it possible to obtain more accurate information on, for example, the effects of drugs or the chemical properties of materials. However, at this point quantum computing is in the Noisy intermediate-scale quantum (NISQ) era. The technology in this current era is defined by sensitivity of systems to noise and a limited amount of computing power. Noise can be defined as any unwanted signal, which can cause errors in the calculation results. As of 2026, the size of quantum processors available is from 50 qubits to 1121 qubits. Due to the limited number of physical qubits available, it is not possible to achieve fault tolerance by programming data into error-corrected logical qubits. The use of error mitigation methods, which aim to minimize the impact of error in the computational results, is a promising option to error correction due to no lower limits for the QPU size. The thesis was to conducted as a literature review on the use of different methods to mitigate noise-induced error in the results of digital quantum simulation implented on NISQ-era quantum computers. The methods considered in this thesis are zeronoise extrapolation (ZNE), Clifford data regression (CDR) and probabilistic error cancellation (PEC). The effectiveness of error mitigation methods is examined on the basis of various indicators, such as accuracy compared to theoretical results, and resource requirements by reviewing articles or conference publications on the digital quantum simulation of spin Hamiltonian dynamics. Based on the results of the study, it is possible to conclude that the error mitigation methods examined in the thesis successfully reduced effects of noise from the results of the simulations. On the other hand, there is a trade-off between the use of resources and accuracy: higher accuracy increases the overhead of using mitigation with a certain rate depending on the method. However, the use of error reduction methods is 4 still preferable due to the benefits they provide in obtaining usable results. The best results are obtained by tailoring the selection of methods based on the application and the type of error to be mitigated.

•Jun 18, 2026•0 citations

Quantum Noise Mitigation with Adaptive Zero-Noise Extrapolation: A Contextual Multi-Armed Bandits Approach

Ratun Rahman, Dinh C. Nguyen

Variational quantum circuits (VQCs) are central to near-term quantum computing, yet their practical deployment is severely hindered by noise. While existing error mitigation methods, such as zero-noise extrapolation (ZNE), typically assume static noise, real noisy intermediate-scale quantum (NISQ) systems exhibit dynamic, time-varying noise that remains largely unaddressed. To overcome this critical gap, our work introduces a novel adaptive noise mitigation framework for VQCs that integrates ZNE with contextual multi-armed bandits (CMAB), enabling dynamic, context-aware selection of circuit-folding levels based on ansatz parameters (e.g., depth, parameter count) and the evolving noise environment. Unlike fixed-fold or heuristic ZNE, our approach uses online adaptation to improve the accuracy of ZNE and reduce redundant quantum circuit executions. Our extensive simulations and experiments on real quantum hardware reveal the following important properties: (i) deeper VQCs accumulate noise, degrading accuracy and increasing the number of quantum circuit executions; (ii) ZNE restores estimator fidelity when the folding level is chosen appropriately; and (iii) CMAB-guided folding cuts quantum circuit execution round trips by up to 40\%, bytes exchanged by up to 35\%, and end-to-end cost by up to 30\% under a 10~Mbps budget, with up to 6.9\% higher estimator fidelity (CIFAR-10, depth 3, noise band $η=0.05$), versus fixed-fold and grid-search ZNE. These results demonstrate substantial performance gains over existing noise mitigation methods, underscoring the effectiveness of our design in supporting robust noise mitigation for VQCs. The source code is also publicly released to support reproducibility.

quant-pharXiv:2608.06426•IEEE Journal on Selected Areas in Communications•Aug 7, 2026•2 citations

Towards fault-tolerant quantum computing: Advanced techniques for error reduction,mitigation and their applications

Kathrin König

Quantum computing holds the potential to address problems that are currently considered intractable for classical processors by leveraging quantum mechanical effects for simulation, optimization, and chemistry. Despite recent technological progress, quantum hardware remains in the noisy intermediate-scale regime, where coherence limits, gate imperfections, and readout errors restrict circuit depth and algorithmic reliability. Although first demonstrations of small-scale Quantum Error Correction exist, logical processors with low logical error rates are still distant. In the near term, even error-corrected qubits are expected to operate with residual error, which means that improving calibration and mitigating errors at the physical and circuit level will remain essential for obtaining meaningful results. Established calibration routines and mitigation methods such as Zero-Noise-Extrapolation (ZNE) are valuable, but need to be further improved and more rigorously validated with respect to their underlying assumptions, stability and quantitative benefits. This thesis addresses error reduction techniques on transmon qubits through calibration, gate analysis, and circuit-level mitigation. First, a systematic comparison of two single-qubit amplitude calibration techniques is carried out (cross-point and ping-pong calibration), followed by an analysis of two implementations of a two-qubit gate, based on the cross-resonance interaction. The results show that cross-point calibration offers faster convergence, higher precision and a more favorable signal to noise ratio than ping-pong calibration. Hamiltonian tomography confirms the validity of a reduced model for the cross-resonance interaction, and algorithmic tests reveal that direct and echoed CNOT gates offer complementary advantages depending on the application. Second, the thesis develops and evaluates the method of Inverted-Circuit Zero-Noise-Extrapolation (IC-ZNE). Its main idea consists of measuring the effective error strength of a circuit through inverted circuits. This quantity is then used for extrapolation towards zero noise rather than relying on simple, approximate noise scaling assumptions as in standard ZNE. This approach constitutes a novel and original method. IC-ZNE consistently produces results closer to ideal reference values than standard ZNE. The method achieves up to 77% error reduction in observable error on the tested circuits compared to standard ZNE and simple post processing filters can yield up to 39% reduction in selected cases compared to standard ZNE. Further refinements introduce noise-adaptive circuit scaling strategies that enhance mitigation outcomes without significant additional cost. The performance of these techniques is examined across several circuits and in the context of variational quantum algorithms. Applications to the Quantum Approximate Optimization Algorithm and the Variational Quantum Eigensolver demonstrate that these techniques extend the useful operating regime of current devices, although their effectiveness decreases for very deep circuits or unfavorable variational ansätze. Taken together, the calibration and mitigation techniques investigated and developed in this thesis demonstrate practical routes toward enhancing the reliability of near-term quantum processors. While they cannot replace full fault-tolerant quantum computation, they offer useful and complementary capabilities that support progress toward scalable quantum technologies.

•Apr 14, 2026•0 citations
Fault-tolerant quantum computers could facilitate the simulation of quantum systems unfeasible for classical computation via Trotterization, a systematic way of implementing time-evolution operators of qubit Hamiltonians as quantum circuits. Pre-fault-tolerance, however, one must make do with noisy intermediate-scale quantum (NISQ) devices, which cannot by themselves manage the deep circuits required by Trotterization. The utilisation of NISQ devices then calls for the use of additional strategies, which include quantum error mitigation (QEM) for alleviating device noise, and variational quantum algorithms (VQAs) which combine classical optimization with short-depth, parameterized quantum circuits. This thesis compares two such methods: zero-noise extrapolation (ZNE) with noise amplification by circuit folding, and incremental structural learning (ISL), a type of circuit recompiling VQA. These are applied to Trotterized time-evolution of the Tavis–Cummings model (TCM) under a noise simulation. Since both methods add circuit evaluation overhead, it is of interest to see how they compare both in the accuracy of the dynamics they produce, and in terms of the quantum resources used. Additionally, noisy recompilation of time-evolution circuits with ISL has not previously been explored. The comparison is done for various simulation parameters, such as the TCM system size. We find that while ISL achieves lower error than ZNE for smaller system sizes, it fails to produce correct dynamics for 4 qubits, where ZNE is superior. Diverging resource requirements for ISL and ZNE are observed, with ISL achieving low circuit depths at the cost of a large number of circuit evaluations. These results highlight the importance of considering the performance of VQAs under noisy conditions as well.
Fault-tolerant quantum computers promise the simulation of complex quantum systems beyond the reach of classical computation. In contrast, current noisy intermediate-scale quantum devices are constrained by hardware noise. Consequently, quantum simulation methods remain limited in their near-term applicability. Two prominent techniques addressing these challenges are zero-noise extrapolation (ZNE) and incremental structural learning (ISL). In this work, ZNE and ISL are benchmarked for simulating the Trotterized time evolution of two models: the Tavis-Cummings model (TCM) and the Heisenberg spin chain (HSC), using a classically simulated noisy hardware backend. The methods are evaluated on the basis of the accuracy of expectation values relative to noiseless simulations and their resource demands such as circuit depths and shot counts. The impact of noise on optimization routines in ISL, previously underexplored, is also investigated. Results indicate that ISL performs more favorably in HSC systems, consistently surpassing ZNE in expectation value accuracy. Conversely, for the TCM, ISL generally yields lower accuracies despite reduced Trotter circuit depths, with weak interactions often leading to pronounced phase lags or flat expectation curves. Notably, when performing ISL optimization under noiseless conditions, the protocol is generally able to reduce dephasing errors, but average accuracies still vary on the simulated Hamiltonian. Our findings highlight the sensitivity of quantum simulation protocols to the structure of the Hamiltonian encoding system dynamics. Trends across systems suggest that ISL optimization benefits from Trotter circuits with stronger interactions, and that ansatz construction favors isotropic couplings. Moreover, although ISL introduces approximation errors, it demonstrates greater robustness than ZNE in systems with deeper Trotter circuits.
Simulating real-time dynamics under a Hamiltonian is a central goal of quantum information science. While numerous Hamiltonian-simulation quantum algorithms have been proposed, the effects of physical noise have rarely been incorporated into their performance analysis, despite the non-negligible noise levels of quantum devices. We present an end-to-end complexity analysis of noisy Hamiltonian simulation combined with quantum error mitigation (QEM) to answer how many circuit runs are required to reach a given target accuracy. Because the QEM sampling overhead grows exponentially with the circuit depth while the algorithmic error decreases with it, the circuit depth becomes an optimization variable, and we derive an analytic depth-selection rule for two algorithm families. For the order-kkk Suzuki--Trotter formula, the optimized cost exhibits a critical error εcε_cεc​, below which the required number of circuit runs grows exponentially. QEM improves the noise dependence of εcε_cεc​ from sublinear to kkkth-power scaling, an exponent improvement by a factor of k+1k+1k+1. For randomized-LCU-based simulation, optimizing the repetition number yields a square-root improvement in the simulation-time dependence of the sampling-overhead exponent over the standard parameter choice. We further quantify the noise-characterization cost required for error mitigation via gate set tomography and the recently proposed space-time noise inversion method, showing that the latter can significantly reduce this cost.
Quantum computers have the potential to address computational problems beyond the practical capabilities of classical systems, but Noisy Intermediate-Scale Quantum (NISQ) processors remain limited by errors that accumulate during circuit execution. Quantum Error Mitigation (QEM), particularly Zero-Noise Extrapolation (ZNE), offers a way to reduce these errors without requiring additional physical qubits. However, ZNE has been studied extensively in relatively small or shallow circuits, leaving its effectiveness in deep, non-variational algorithms less explored. This project investigates whether combining readout mitigation and ZNE can mitigate errors in a deep, six-qubit Grover's search algorithm. The circuit was compiled onto IBM's 133-qubit FakeTorino simulated backend, reaching a depth of 1,118 and containing 369 entangling gates. Under simulated noise, the unmitigated probability of measuring the target state was 3.36%, compared with a uniform random-guessing probability of 1.5625%. Digital unitary gate folding and readout error mitigation were subsequently applied across four progressively increased noise-scaling sets (S1–S4), and scale factors. Four extrapolation models (Linear, Quadratic, Poly-Exponential, and Padé) were evaluated. The Poly-Exponential model achieved the highest average target-state probability, reaching 6.91% at S4, approximately 2.06 times the unmitigated probability. These results demonstrate that combining readout mitigation with ZNE can partially recover computational signals in deep quantum circuits under simulated hardware noise, suggesting the potential combined error mitigation techniques for improving the reliability of near-term quantum algorithms without active quantum error correction.
Quantum technology is a rapidly growing field; in the near future, quantum computers may be able to solve computationally complex problems that currently cannot be realistically solved by a classical computer. Digital quantum simulation is one such potential applications. Simulating the behavior of quantum mechanical systems, such as molecules, with a quantum computer is possible in polynomial time. Running the same computation with a classical computer would take an amount of time exponentially scaling with the size of the problem. Being able to obtain error free results of such simulations on a quantum computer could make it possible to obtain more accurate information on, for example, the effects of drugs or the chemical properties of materials. However, at this point quantum computing is in the Noisy intermediate-scale quantum (NISQ) era. The technology in this current era is defined by sensitivity of systems to noise and a limited amount of computing power. Noise can be defined as any unwanted signal, which can cause errors in the calculation results. As of 2026, the size of quantum processors available is from 50 qubits to 1121 qubits. Due to the limited number of physical qubits available, it is not possible to achieve fault tolerance by programming data into error-corrected logical qubits. The use of error mitigation methods, which aim to minimize the impact of error in the computational results, is a promising option to error correction due to no lower limits for the QPU size. The thesis was to conducted as a literature review on the use of different methods to mitigate noise-induced error in the results of digital quantum simulation implented on NISQ-era quantum computers. The methods considered in this thesis are zeronoise extrapolation (ZNE), Clifford data regression (CDR) and probabilistic error cancellation (PEC). The effectiveness of error mitigation methods is examined on the basis of various indicators, such as accuracy compared to theoretical results, and resource requirements by reviewing articles or conference publications on the digital quantum simulation of spin Hamiltonian dynamics. Based on the results of the study, it is possible to conclude that the error mitigation methods examined in the thesis successfully reduced effects of noise from the results of the simulations. On the other hand, there is a trade-off between the use of resources and accuracy: higher accuracy increases the overhead of using mitigation with a certain rate depending on the method. However, the use of error reduction methods is 4 still preferable due to the benefits they provide in obtaining usable results. The best results are obtained by tailoring the selection of methods based on the application and the type of error to be mitigated.
Variational quantum circuits (VQCs) are central to near-term quantum computing, yet their practical deployment is severely hindered by noise. While existing error mitigation methods, such as zero-noise extrapolation (ZNE), typically assume static noise, real noisy intermediate-scale quantum (NISQ) systems exhibit dynamic, time-varying noise that remains largely unaddressed. To overcome this critical gap, our work introduces a novel adaptive noise mitigation framework for VQCs that integrates ZNE with contextual multi-armed bandits (CMAB), enabling dynamic, context-aware selection of circuit-folding levels based on ansatz parameters (e.g., depth, parameter count) and the evolving noise environment. Unlike fixed-fold or heuristic ZNE, our approach uses online adaptation to improve the accuracy of ZNE and reduce redundant quantum circuit executions. Our extensive simulations and experiments on real quantum hardware reveal the following important properties: (i) deeper VQCs accumulate noise, degrading accuracy and increasing the number of quantum circuit executions; (ii) ZNE restores estimator fidelity when the folding level is chosen appropriately; and (iii) CMAB-guided folding cuts quantum circuit execution round trips by up to 40\%, bytes exchanged by up to 35\%, and end-to-end cost by up to 30\% under a 10~Mbps budget, with up to 6.9\% higher estimator fidelity (CIFAR-10, depth 3, noise band η=0.05η=0.05η=0.05), versus fixed-fold and grid-search ZNE. These results demonstrate substantial performance gains over existing noise mitigation methods, underscoring the effectiveness of our design in supporting robust noise mitigation for VQCs. The source code is also publicly released to support reproducibility.
Quantum computing holds the potential to address problems that are currently considered intractable for classical processors by leveraging quantum mechanical effects for simulation, optimization, and chemistry. Despite recent technological progress, quantum hardware remains in the noisy intermediate-scale regime, where coherence limits, gate imperfections, and readout errors restrict circuit depth and algorithmic reliability. Although first demonstrations of small-scale Quantum Error Correction exist, logical processors with low logical error rates are still distant. In the near term, even error-corrected qubits are expected to operate with residual error, which means that improving calibration and mitigating errors at the physical and circuit level will remain essential for obtaining meaningful results. Established calibration routines and mitigation methods such as Zero-Noise-Extrapolation (ZNE) are valuable, but need to be further improved and more rigorously validated with respect to their underlying assumptions, stability and quantitative benefits. This thesis addresses error reduction techniques on transmon qubits through calibration, gate analysis, and circuit-level mitigation. First, a systematic comparison of two single-qubit amplitude calibration techniques is carried out (cross-point and ping-pong calibration), followed by an analysis of two implementations of a two-qubit gate, based on the cross-resonance interaction. The results show that cross-point calibration offers faster convergence, higher precision and a more favorable signal to noise ratio than ping-pong calibration. Hamiltonian tomography confirms the validity of a reduced model for the cross-resonance interaction, and algorithmic tests reveal that direct and echoed CNOT gates offer complementary advantages depending on the application. Second, the thesis develops and evaluates the method of Inverted-Circuit Zero-Noise-Extrapolation (IC-ZNE). Its main idea consists of measuring the effective error strength of a circuit through inverted circuits. This quantity is then used for extrapolation towards zero noise rather than relying on simple, approximate noise scaling assumptions as in standard ZNE. This approach constitutes a novel and original method. IC-ZNE consistently produces results closer to ideal reference values than standard ZNE. The method achieves up to 77% error reduction in observable error on the tested circuits compared to standard ZNE and simple post processing filters can yield up to 39% reduction in selected cases compared to standard ZNE. Further refinements introduce noise-adaptive circuit scaling strategies that enhance mitigation outcomes without significant additional cost. The performance of these techniques is examined across several circuits and in the context of variational quantum algorithms. Applications to the Quantum Approximate Optimization Algorithm and the Variational Quantum Eigensolver demonstrate that these techniques extend the useful operating regime of current devices, although their effectiveness decreases for very deep circuits or unfavorable variational ansätze. Taken together, the calibration and mitigation techniques investigated and developed in this thesis demonstrate practical routes toward enhancing the reliability of near-term quantum processors. While they cannot replace full fault-tolerant quantum computation, they offer useful and complementary capabilities that support progress toward scalable quantum technologies.