Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

高速冷却を目指した多孔質材料中におけるポジトロニウムのレーザー励起

Kenji Shu

Published Mar 23, 2020• 0 citations
Publisher

Abstract

Rapid cooling of positronium (Ps) is an essential technique to improve precision of testing fundamental theories, and to realize the first Bose-Einstein condensation with antimatters.It was recently proposed that Doppler laser cooling of Ps confined in a porous material is efficient enough to achieve such targets.In this process Ps is excited many times inside nano pores.It was, however, reported that decay of the excited Ps into annihilation γ-rays was enhanced in nano pores and a line width of the resonace was broadened, both of which make the proposed cooling method useless.In that report, the decay of Ps in the ground state was also enhanced by being possibly trapped at some contaminants remaining on the surface of the pores, and the origin of the abnormal phenomena was attributed to the formation of such surface state.In this thesis, a Ps confining cavity which did not have the contaminants affecting Ps in the ground state was fabricated, and laser excitations of Ps in the pores were performed.The excited Ps had the similar enhancement of the decay and broad resonance spectrum also in the new cavity to favor that some of the distinctive features of the excited state, such as the small binding energy or high electric susceptibility, are origins of the abnormal phenomena.In order to quantitativaly estimate the decay rate and the broadening effect of the excited Ps, a realistic model was newly constructed with including those parameters.It was measured for the first time that the decay rate was in the order of 1 THz and depended on kinetic energy of Ps.The width of the resonance spectrum was broadened as wide as 1 nm in FWHM but independent on the decay rate.This favors that the broadening is induced by other machanisms from the enhanced decay.Possible mechanisms of both of the enhanced decay and the broadening , and future works to elucidate them are discussed following the measurements.

DOI
10.15083/0002004689

Related papers

Development of a porous silica cavity for laser excitation of confined positronium

Kenji Shu, Kyohei Yamada, Kaori Hashidate +18 more

Laser cooling of positronium (Ps) is an important technique to advance the frontier of science by, for instance, realizing the first Bose-Einstein condensation of antimatters. It was proposed that performing laser cooling on Ps trapped in a cryogenic porous material would be more efficient, but a recent study (Cooper, et al., Phys. Rev. B 97, 205302 (2018)) reported that Ps in the excited (2P) state inside nano pores of silica had a large decay rate into γ-rays, and the resonant spectrum of the transition was significantly broadened, both of which are critically problematic for the proposed cooling scheme. A possible cause of these unexplained results was proposed to be residual impurities which trapped Ps in the vicinity of the pore surface and then enhanced interactions between Ps and the material. This work reports fabrication and inspection of a new porous silica cavity without such impurities, and construction of an experimental system to induce the Lyman-α transition of Ps trapped in pores of the cavity.

JJAP Conference Proceedings•Jan 1, 2023•1 citation

Excited-State Annihilation of Positronium in Cryogenic Silica Aerogel for In-Material Laser Cooling

Akira Ishida, Toshio Namba, Nagayasu Oshima +7 more

Abstract We report recent progress toward achieving positronium (Ps) Bose–Einstein condensation (BEC) by combining thermalization in nanoporous materials with ultraviolet (UV) laser Doppler cooling. Experiments were performed using silica aerogels held at two distinct thermal conditions—approximately room temperature and cryogenic temperature down to 8 K (measured at the sample-holder)—to study the laser-induced annihilation of Ps atoms excited to the 2P state. Resonant excitation at 243 nm significantly enhanced gamma-ray emission, with the annihilation signal reduced by approximately 50 % at low temperature compared to room temperature. Increasing the delay between Ps formation and laser excitation further reduced the annihilation probability. These observations confirm that Ps thermalization affects 2P-Ps annihilation. The results support a model of surface-induced 2P-state decay and suggest that excited-state Ps serves as a sensitive probe of surface interactions in nanoporous media. This constitutes an important step toward implementing laser cooling of Ps confined in solids—an essential prerequisite for realizing Ps-BEC. Ongoing efforts focus on systematic evaluation of pore structure, surface chemistry, and temperature effects to optimize Ps dynamics toward condensation.

Journal of Physics Conference Series•Nov 1, 2025•0 citations

Positronium cooling in porous silica measured via Doppler spectroscopy

D. B. Cassidy, P. Crivelli, T. H. Hisakado +5 more

We have measured the kinetic energy of positronium (Ps) atoms emitted into a vacuum from a porous silica film subsequent to positron bombardment, via the Doppler spread of the linewidth of the Ps ${1}^{3}S$-${2}^{3}P$ transition. We find that the deeper in the target film that positrons are implanted the colder is the emitted Ps, an effect we attribute to cooling via collisions in the pores as the atoms diffuse back to the film surface. We observed a lower limit to the mean Ps kinetic energy associated with motion in the direction of the laser, ${E}_{x}=42\ifmmode\pm\else\textpm\fi{}3$ meV, that is consistent with conversion of the confinement energy of Ps in the 2.7-nm-diameter pores to kinetic energy in vacuum. An implication is that a porous sample would need to be composed of pores greater than around 10 nm in diameter in order to produce thermal Ps in vacuum with temperatures of less than 100 K. By performing Doppler spectroscopy on intense pulses of Ps we have experimentally demonstrated the production of many excited-state Ps atoms simultaneously, which could have numerous applications, including laser cooling and fundamental spectroscopic studies of Ps and the production of antihydrogen.

Physical Review A•Jan 29, 2010•144 citations

Positronium Laser Deceleration, Cooling and Trapping

Barna Mendei, Helmut Ritsch

We numerically study laser deceleration, cooling and trapping of host fast ortho-positronium (Ps) bunches as produced in silica microchannel targets using positron bunches from a Surko trap. While Doppler laser cooling routinely allows to cool neutral atom species below milli-Kelvin kinetic temperatures, the fast ground state annihilation and the high recoil shift to line-width ratio in Ps pose new challenging limitations on timing and the required laser power. Earlier theoretical work and first experiments already exhibit viable prospects for radiation pressure cooling to create unprecedented cold and dense Ps ensembles. Our extended numerical studies confirm very good prospects to simultaneously decelerate, cool and optically trap Ps atoms in a standard Doppler cooling geometry on the $1^3\mathrm{S}$--$2^3\mathrm{P}$ transition. Including the full Zeeman state manifolds and adding additional transverse lasers on the $2^3\mathrm{P}$--$3^3\mathrm{D}$ transition improves timing and final temperature to allow for optical trapping at the end. The required laser powers and geometry parameters to implement effective slowing and trapping within a time frame, where the majority of atoms is not annihilated, is in reach of current technology of $\mathrm{mJ}$ energy pulses of approximately $100\ \mathrm{ns}$ duration. Future extensions to collectively enhance cooling and trapping in optical cavities or hollow-core fibres should finally allow fast preparation of ultra-cold Ps systems as future basis of superradiant lasing and Bose--Einstein condensates.

quant-pharXiv:2609.35202•Sep 29, 2026•0 citations

COOLING AND QUENCHING OF POSITRONIUM AND PROSPECT FOR A Ps BEC

Toshio Hyodo, Haruo Saito, Y. Nagashima +2 more

Realization of Bose-Einstein Condensate (BEC) of positronium (Ps), a purely leptonic particle-antiparticle bound system, is a challenging subject [1, 2]. Recently, Ivanov et al. [3] theoretically investigated the Ps-Ps scattering and showed theoretically that the scattering length for the o-Ps atoms is positive, indicating that a stable o-Ps BEC is actually possible. The condition for the BEC of the ideal Bose gas is λth > (2.612/n)1/3, where λth = h/ √ 2πmkT is the thermal de Broglie wavelength of the atom and n is the number density. This gives the critical temperature for the Ps BEC as Tc = 1.46×10−15n2/3, where Tc is in K and n is in m−3. This condition is much less severe than for the usual alkali atom BEC because λth is longer by five orders of magnitude. However, Ps has a finite lifetime: the lifetime of singlet state, para-positronium (p-Ps), is 125 ps and that of triplet state, ortho-positronium (o-Ps), is 142 ns. Thus a many-Ps system must be cooled within the lifetime of o-Ps. The short lifetime of Ps demands quick cooling and high density. The laser cooling which is employed for the accomplishment of alkali atom BEC is likely to be impractical because it takes longer time. It is also subject to relatively large recoil of the Ps atom when hit by a photon. Moreover, unless an effective method for trapping Ps in free space is developed, the system of Ps atoms diffuses and lowers its density. Platzmann and Mills [1] suggested to confine Ps in a small cavity of insulating material and let the Ps atoms give away their kinetic energy to the walls of the cavity. If one injects an intense polarized positron beam onto a material which has a micro cavity near surface, some of the positrons form Ps and are emitted into the cavity and stay there. This is expected because the work function of most of the material for Ps is negative, i.e., Ps atoms emitted into the cavity after thermalization in the material will never penetrate back into the material. They just hit the cavity walls and approach thermal equilibrium by exciting phonons. The probability of the annihilation of o-Ps with a surface electron is small if there are no paramagnetic centers on the cavity walls. It is necessary to use a polarized positron beam to make Ps. Otherwise all the o-Ps atoms are lost through mutual spin conversion into p-Ps [1, 4]. In this report we would like to discuss prospect of a Ps BEC with special attention to the following aspects [4]: (1) use of 18F for a source of an intense spin-polarized positron beams [5], (2) development of high efficiency Wmesh positron moderator, (3) emission of Ps from solid surface (4) the cooling of Ps in a cavity, and (5) the detection of a Ps BEC.

•Jan 1, 2002•0 citations

LASER COOLING OF ORTHO-POSITRONIUM: TOWARD REALIZATION OF BOSE-EINSTEIN CONDENSATION

T. Hirose, Takashi Asonuma, H. Iijima +8 more

Experimental and theoretical investigations of laser cooling of ortho-Positronium (o-Ps) are reported and feasibilities of Bose-Einstein condensation are discussed. It is shown that in spite of the short lifetime of o-Ps, i.e. 142 nsec, thermally produced o-Ps with a room temperature 300 K can be cooled down to the recoil limit of 0.1 K by ultraviolet laser with a wave-length of 243 nm corresponding to the 1S-2P transition energy of o-Ps. In order to conduct proof-of-principle experiments, we have constructed a laser cooling facility which consists of a slow positron beam generator and a laser system to produce long pulse, wide line-width laser lights. For the examination of how efficiently laser cooling is achieved, we have developed a three dimensional Monte Carlo program, which incorporates various parameters of laser beam and positronium distributions expected in the current laser cooling apparatus. This simulation revealed that 7% of o-Ps was able to be cooled down to the recoil limit as well as to be confined in a relatively small volume without employing a special trap. We also discuss related issues such as optical trapping and loss of o-Ps due to ionization, two body and three body interactions.

Quantum Aspects of Beam Physics•May 1, 2002•1 citation
Rapid cooling of positronium (Ps) is an essential technique to improve precision of testing fundamental theories, and to realize the first Bose-Einstein condensation with antimatters.It was recently proposed that Doppler laser cooling of Ps confined in a porous material is efficient enough to achieve such targets.In this process Ps is excited many times inside nano pores.It was, however, reported that decay of the excited Ps into annihilation γ-rays was enhanced in nano pores and a line width of the resonace was broadened, both of which make the proposed cooling method useless.In that report, the decay of Ps in the ground state was also enhanced by being possibly trapped at some contaminants remaining on the surface of the pores, and the origin of the abnormal phenomena was attributed to the formation of such surface state.In this thesis, a Ps confining cavity which did not have the contaminants affecting Ps in the ground state was fabricated, and laser excitations of Ps in the pores were performed.The excited Ps had the similar enhancement of the decay and broad resonance spectrum also in the new cavity to favor that some of the distinctive features of the excited state, such as the small binding energy or high electric susceptibility, are origins of the abnormal phenomena.In order to quantitativaly estimate the decay rate and the broadening effect of the excited Ps, a realistic model was newly constructed with including those parameters.It was measured for the first time that the decay rate was in the order of 1 THz and depended on kinetic energy of Ps.The width of the resonance spectrum was broadened as wide as 1 nm in FWHM but independent on the decay rate.This favors that the broadening is induced by other machanisms from the enhanced decay.Possible mechanisms of both of the enhanced decay and the broadening , and future works to elucidate them are discussed following the measurements.
Laser cooling of positronium (Ps) is an important technique to advance the frontier of science by, for instance, realizing the first Bose-Einstein condensation of antimatters. It was proposed that performing laser cooling on Ps trapped in a cryogenic porous material would be more efficient, but a recent study (Cooper, et al., Phys. Rev. B 97, 205302 (2018)) reported that Ps in the excited (2P) state inside nano pores of silica had a large decay rate into γ-rays, and the resonant spectrum of the transition was significantly broadened, both of which are critically problematic for the proposed cooling scheme. A possible cause of these unexplained results was proposed to be residual impurities which trapped Ps in the vicinity of the pore surface and then enhanced interactions between Ps and the material. This work reports fabrication and inspection of a new porous silica cavity without such impurities, and construction of an experimental system to induce the Lyman-α transition of Ps trapped in pores of the cavity.
Abstract We report recent progress toward achieving positronium (Ps) Bose–Einstein condensation (BEC) by combining thermalization in nanoporous materials with ultraviolet (UV) laser Doppler cooling. Experiments were performed using silica aerogels held at two distinct thermal conditions—approximately room temperature and cryogenic temperature down to 8 K (measured at the sample-holder)—to study the laser-induced annihilation of Ps atoms excited to the 2P state. Resonant excitation at 243 nm significantly enhanced gamma-ray emission, with the annihilation signal reduced by approximately 50 % at low temperature compared to room temperature. Increasing the delay between Ps formation and laser excitation further reduced the annihilation probability. These observations confirm that Ps thermalization affects 2P-Ps annihilation. The results support a model of surface-induced 2P-state decay and suggest that excited-state Ps serves as a sensitive probe of surface interactions in nanoporous media. This constitutes an important step toward implementing laser cooling of Ps confined in solids—an essential prerequisite for realizing Ps-BEC. Ongoing efforts focus on systematic evaluation of pore structure, surface chemistry, and temperature effects to optimize Ps dynamics toward condensation.
We have measured the kinetic energy of positronium (Ps) atoms emitted into a vacuum from a porous silica film subsequent to positron bombardment, via the Doppler spread of the linewidth of the Ps 13S{1}^{3}S13S-23P{2}^{3}P23P transition. We find that the deeper in the target film that positrons are implanted the colder is the emitted Ps, an effect we attribute to cooling via collisions in the pores as the atoms diffuse back to the film surface. We observed a lower limit to the mean Ps kinetic energy associated with motion in the direction of the laser, ${E}_{x}=42\ifmmode\pm\else\textpm\fi{}3$ meV, that is consistent with conversion of the confinement energy of Ps in the 2.7-nm-diameter pores to kinetic energy in vacuum. An implication is that a porous sample would need to be composed of pores greater than around 10 nm in diameter in order to produce thermal Ps in vacuum with temperatures of less than 100 K. By performing Doppler spectroscopy on intense pulses of Ps we have experimentally demonstrated the production of many excited-state Ps atoms simultaneously, which could have numerous applications, including laser cooling and fundamental spectroscopic studies of Ps and the production of antihydrogen.
We numerically study laser deceleration, cooling and trapping of host fast ortho-positronium (Ps) bunches as produced in silica microchannel targets using positron bunches from a Surko trap. While Doppler laser cooling routinely allows to cool neutral atom species below milli-Kelvin kinetic temperatures, the fast ground state annihilation and the high recoil shift to line-width ratio in Ps pose new challenging limitations on timing and the required laser power. Earlier theoretical work and first experiments already exhibit viable prospects for radiation pressure cooling to create unprecedented cold and dense Ps ensembles. Our extended numerical studies confirm very good prospects to simultaneously decelerate, cool and optically trap Ps atoms in a standard Doppler cooling geometry on the 13S1^3\mathrm{S}13S--23P2^3\mathrm{P}23P transition. Including the full Zeeman state manifolds and adding additional transverse lasers on the 23P2^3\mathrm{P}23P--33D3^3\mathrm{D}33D transition improves timing and final temperature to allow for optical trapping at the end. The required laser powers and geometry parameters to implement effective slowing and trapping within a time frame, where the majority of atoms is not annihilated, is in reach of current technology of mJ\mathrm{mJ}mJ energy pulses of approximately 100 ns100\ \mathrm{ns}100 ns duration. Future extensions to collectively enhance cooling and trapping in optical cavities or hollow-core fibres should finally allow fast preparation of ultra-cold Ps systems as future basis of superradiant lasing and Bose--Einstein condensates.
Realization of Bose-Einstein Condensate (BEC) of positronium (Ps), a purely leptonic particle-antiparticle bound system, is a challenging subject [1, 2]. Recently, Ivanov et al. [3] theoretically investigated the Ps-Ps scattering and showed theoretically that the scattering length for the o-Ps atoms is positive, indicating that a stable o-Ps BEC is actually possible. The condition for the BEC of the ideal Bose gas is λth > (2.612/n)1/3, where λth = h/ √ 2πmkT is the thermal de Broglie wavelength of the atom and n is the number density. This gives the critical temperature for the Ps BEC as Tc = 1.46×10−15n2/3, where Tc is in K and n is in m−3. This condition is much less severe than for the usual alkali atom BEC because λth is longer by five orders of magnitude. However, Ps has a finite lifetime: the lifetime of singlet state, para-positronium (p-Ps), is 125 ps and that of triplet state, ortho-positronium (o-Ps), is 142 ns. Thus a many-Ps system must be cooled within the lifetime of o-Ps. The short lifetime of Ps demands quick cooling and high density. The laser cooling which is employed for the accomplishment of alkali atom BEC is likely to be impractical because it takes longer time. It is also subject to relatively large recoil of the Ps atom when hit by a photon. Moreover, unless an effective method for trapping Ps in free space is developed, the system of Ps atoms diffuses and lowers its density. Platzmann and Mills [1] suggested to confine Ps in a small cavity of insulating material and let the Ps atoms give away their kinetic energy to the walls of the cavity. If one injects an intense polarized positron beam onto a material which has a micro cavity near surface, some of the positrons form Ps and are emitted into the cavity and stay there. This is expected because the work function of most of the material for Ps is negative, i.e., Ps atoms emitted into the cavity after thermalization in the material will never penetrate back into the material. They just hit the cavity walls and approach thermal equilibrium by exciting phonons. The probability of the annihilation of o-Ps with a surface electron is small if there are no paramagnetic centers on the cavity walls. It is necessary to use a polarized positron beam to make Ps. Otherwise all the o-Ps atoms are lost through mutual spin conversion into p-Ps [1, 4]. In this report we would like to discuss prospect of a Ps BEC with special attention to the following aspects [4]: (1) use of 18F for a source of an intense spin-polarized positron beams [5], (2) development of high efficiency Wmesh positron moderator, (3) emission of Ps from solid surface (4) the cooling of Ps in a cavity, and (5) the detection of a Ps BEC.
Experimental and theoretical investigations of laser cooling of ortho-Positronium (o-Ps) are reported and feasibilities of Bose-Einstein condensation are discussed. It is shown that in spite of the short lifetime of o-Ps, i.e. 142 nsec, thermally produced o-Ps with a room temperature 300 K can be cooled down to the recoil limit of 0.1 K by ultraviolet laser with a wave-length of 243 nm corresponding to the 1S-2P transition energy of o-Ps. In order to conduct proof-of-principle experiments, we have constructed a laser cooling facility which consists of a slow positron beam generator and a laser system to produce long pulse, wide line-width laser lights. For the examination of how efficiently laser cooling is achieved, we have developed a three dimensional Monte Carlo program, which incorporates various parameters of laser beam and positronium distributions expected in the current laser cooling apparatus. This simulation revealed that 7% of o-Ps was able to be cooled down to the recoil limit as well as to be confined in a relatively small volume without employing a special trap. We also discuss related issues such as optical trapping and loss of o-Ps due to ionization, two body and three body interactions.