Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Energy Technology and Electrical Power (ETEP)

Research on Anti-Mechanical Vibration Performance of Rydberg Atom Electric Field Sensing System

Wenxin Peng, Shuo Li, Yanling Sun, Xiaodong Xia

Published Dec 26, 2025• 0 citations
Publisher

Abstract

Rydberg atom electric field sensing technology shows great potential for power system frequency electric field measurement but faces mechanical vibration interference when moving from laboratory to on-site applications. To address this bottleneck, a compact Rydberg atom optical path system was constructed: the cesium atomic vapor cell for measurement was fiber-connected to enable flexible fixation of the sensing unit, and key optical components were configured to optimize the Electromagnetically Induced Transparency (EIT) effect. Experiments were conducted to analyze the effects of vibrations applied in directions parallel and perpendicular to the optical path on EIT Spectral, both with and without DC electric field dressing. Experimental observations reveal distinct impacts of vibrations along the two directions, and in both cases the intensity of vibration-induced effects scales with increasing frequency and amplitude. Despite periodic baseline fluctuations observed under vibrations in either direction, no frequency shifts of the EIT Spectral were detected across all experiments. This confirms the excellent anti-vibration performance of the proposed Rydberg cesium atom electric field sensing system, providing theoretical support for its on-site application in power systems.

DOI
10.1109/etep67941.2025.11440372

Related papers

Measurement of low-frequency electric field waveform by Rydberg atom-based sensor

Xuechao Zhang, Jia-Hui Qiao, Yao Liu +6 more

The high polarizability of Rydberg atoms enables the multi-parameters measurement of electromagnetic fields. In this paper, we report on an atomic antenna based on Rydberg atoms in a room temperature vapor cell. The EIT is a destructive interference spectroscopy with a narrow linewidth and can be used to detect small electric fields through Autler-Townes splitting or Stark shifts. In our experiments, we employ cascade-type two-photon excitation electromagnetically induced transparency (EIT) spectroscopy to measure the shift of the Rydberg energy level. We introduce a low-frequency electric field (~kHz frequency) using a built-in electrode technique in the cesium cell. The interaction between the Rydberg atom and electric field induces the Stark shifts, where the amplitude of the electric field is converted into corresponding two-photon detuning by the EIT effect. Furthermore, the amplitude of the low-frequency electric field is converted into an intensity signal of EIT probe beam. Under weak field conditions, it is an approximate linear relationship between EIT transmission signal and input electric field amplitude, enabling measurement of waveform, amplitude, and frequency. We have demonstrated optical measurements of low-frequency electric field using Rydberg atoms. By increasing the power of probe beam and coupling beam, the EIT can increase the response bandwidth from ~MHz to hundreds of MHz. This provides a scalable approach for measuring high-frequency electric fields.

Acta Physica Sinica•Jan 1, 2024•4 citations

Electric field sensing via Rydberg electromagnetically induced transparency using Zeeman and Stark effects

Y. C. Chen, Shao-Cheng Fang, Hsuan-Jui Su +1 more

Rydberg-assisted atomic electrometry with thermal vapors offers a promising approach for detecting external electric fields. However, this technique presents significant challenges for measuring low frequencies due to the effects of metal-alkali atoms adsorbed on the interior surface of the vacuum chamber. In this work, we apply high-contrast Rydberg electromagnetically induced transparency (EIT) spectroscopy to systematically investigate these effects, including the influence of laser power and electric field strength. We demonstrate the ability to measure electric field frequencies ranging from 10 Hz to 1 MHz. Additionally, this study identifies a fundamental limit for data capacity in such measurements. Furthermore, we propose a method for precise Stark shift measurements by locking the coupling laser to Zeeman-split Rydberg EIT peaks. Using the Zeeman shift in a reference cell as a stable frequency reference, we are able to track Stark-induced shifts in a science cell and confirm excellent agreement with theoretical predictions. These results provide valuable insights for future precision measurement techniques and field sensing applications based on Rydberg atom systems.

arXiv:2402.01430•Journal of Applied Physics•Sep 2, 2025•3 citations

Spectral characteristics of Floquet-electromagnetically induced transparency dressed by radio frequency field in a direct current electric field

Haonan DUAN, Zhonghua JI, Weixin Liu +3 more

A Rydberg atom is a special type of atom characterized by a high principal quantum number. Electric field sensors based on Rydberg atoms have received widespread attention due to their high polarizability. However, there is currently little research on the use of Rydberg atoms for direct current (DC) or low-frequency electric fields, mainly due to the shielding effect of atomic vapor cells in low-frequency electric fields, which makes accurate measurement of the electric fields extremely challenging. In this paper, we construct a Rydberg ladder configuration by using probe laser at 852 nm and coupling laser at 510 nm in a room-temperature cesium vapor cell with integrated electrode plates, thereby enabling the realizing of a Floquet-EIT (electromagnetically induced transparency) spectrum dressed by a radio frequency (RF) field in the presence of a DC electric field. We further study the influence of DC electric field on spectral characteristic. Experimentally, it is observed that when only the RF electric field is applied, the EIT spectrum displays solely even-order sidebands. Furthermore, when both the RF field and the DC electric field are simultaneously present, the first-order sideband signal of the Floquet-EIT is observed. As the intensity of the DC electric field increases, the amplitude of the first-order sideband gradually increases. However, increasing the DC electric field to a sufficient magnitude induces sideband interference, which leads the sideband amplitudes to decrease. Furthermore, increasing the RF frequency can alleviate the interference effects induced by the DC electric field on the first-order sideband. Finally, comparing the relative standard deviation of the sideband amplitudes of the Floquet-EIT spectra with the frequency shifts of the DC-Stark spectra under weak DC electric fields, we find that the measurement accuracy of the former is significantly superior to that of the latter. This work makes use of a Cs atomic vapor cell with an integrated electrode to avoid shielding effects. By observing Floquet-EIT spectra, the response of the spectra to DC electric fields is investigated. This experiment provides novel insights into the quantum sensing measurements of DC and low-frequency electric fields.

Acta Physica Sinica•Jan 1, 2025•0 citations

Electromagnetically induced transparency spectra of cesium Rydberg atoms decorated by radio-frequency fields

Yulong Han, Bang Liu, Kan Zhang +3 more

The large electric dipole moment of the Rydberg atom allows for strong coupling with weak electric fields, and is widely used in electric field measurements because of its reproducibility, precision and stability. The combination of Rydberg atoms and electromagnetically induced transparency (EIT) technology has been used for detecting and characterizing radio-frequency (RF) electric fields. In this work, by selecting probe light (852 nm), dressed light (1470 nm), and coupled light (780 nm), the Rydberg state (49P3/2) of Cs atom is prepared by using a three-photon excitation scheme through using all-infrared light excitation of Rydberg atoms. We experimentally observe the EIT spectra of the Rydberg states decorated by radio-frequency electric fields, which optically detects Rydberg atoms. The effect of the amplitude and frequency of the RF electric field on the spectrum is explored in light of changes in the EIT spectrum. The results show that in the region of weak electric field, only the ac Stark energy shift and spectral broadening occur. As the electric field is further enhanced, the sideband phenomenon occurs in both the primary peak and secondary peak of the EIT. In the region of strong field, the Rydberg energy level produces a series of Floquet states with higher-order terms, as well as state shifting and mixing, resulting in asymmetry in the spectra of the EIT sideband peaks. The effect of frequency on the shielding effect of the Cs vapor cell is further discussed based on the shift of the main peak of the EIT. The demodulation of the electric field in a range of 50 Hz–1 kHz with a fidelity of 95% is achieved by modulating the low-frequency electric field to the RF electric field. The results can provide valuable references for spectral detection and traceable measurements of low-frequency electric fields.

Acta Physica Sinica•Jan 1, 2024•2 citations

Effect of laser detuning and Rabi frequency on rubidium Rydberg electromagnetically-induced transparency for atom-based electric field sensing

Kittisak Ketaiam, Nithiwadee Thaicharoen

Abstract Atom-based electromagnetic field sensing is a highly precise and sensitive technique for measuring and detecting electromagnetic fields, based on the principles of the Rydberg electromagnetically induced transparency (EIT). In this study, we simulate an atom-based electric field measurement system using a four-level system of rubidium atoms. We solve the steady-state solution of the Lindblad master equation using a Hamiltonian that contains information about rubidium properties and the external electric field. We observe that the splitting of the EIT signal is directly proportional to the intensity of the applied electric field, making it a highly sensitive method for electromagnetic field sensing. In addition, we investigate the effect of laser detuning and Rabi frequency on the linewidth and signal strength of the EIT signal in order to obtain optimal parameters for future experiments. This study provides insights into optimizing the EIT signal for electromagnetic fields detection, with potential benefits for future developments in this field.

Journal of Physics Conference Series•Dec 1, 2023•1 citation

Impact of light-induced atomic desorption on electric field sensing via electromagnetically induced transparency and its correction

Dongping Xiao, Wenyu Lin, Sheng Yan +2 more

In Rydberg quantum electric field sensing, the amplitude and linewidth of electromagnetically induced transparency (EIT) spectra significantly impact the accuracy of electric field measurements. This paper discusses the influence of atomic density on the amplitude and linewidth of EIT spectra in a vapor cell within a three-level ladder system driven by two-photon excitation. Due to the adsorption of alkali metal atoms on the inner surface of the vapor cell, the study utilizes light-induced atomic desorption effects to regulate the atomic density using LED light. This approach, combined with probe and coupling lasers, results in the formation of high-amplitude, low-linewidth EIT spectra. Based on the Rydberg atom sensing measurement system constructed in this study, when the number of atoms per cubic meter is less than 1.5×10 24 , a decrease in the optical depth at the bottom of the EIT leads to a reduction in amplitude and an increase in linewidth. When the number of atoms per cubic meter exceeds 4×10 24 , a decrease in the peak value at the top of the EIT results in a reduction in amplitude, with a slight decrease in linewidth. By adjusting the atomic density within the vapor cell through the power of desorption light and optimizing the laser Rabi frequency parameters, the atomic number density is maintained between 1.5×10 24 and 4×10 24 per cubic meter, yielding high-amplitude, low-linewidth EIT spectra. Additionally, the influence of introducing 365 nm desorption light on the accuracy of the constructed electric field measurement system is analyzed and corrected.

Applied Optics•Jan 3, 2025•1 citation
Rydberg atom electric field sensing technology shows great potential for power system frequency electric field measurement but faces mechanical vibration interference when moving from laboratory to on-site applications. To address this bottleneck, a compact Rydberg atom optical path system was constructed: the cesium atomic vapor cell for measurement was fiber-connected to enable flexible fixation of the sensing unit, and key optical components were configured to optimize the Electromagnetically Induced Transparency (EIT) effect. Experiments were conducted to analyze the effects of vibrations applied in directions parallel and perpendicular to the optical path on EIT Spectral, both with and without DC electric field dressing. Experimental observations reveal distinct impacts of vibrations along the two directions, and in both cases the intensity of vibration-induced effects scales with increasing frequency and amplitude. Despite periodic baseline fluctuations observed under vibrations in either direction, no frequency shifts of the EIT Spectral were detected across all experiments. This confirms the excellent anti-vibration performance of the proposed Rydberg cesium atom electric field sensing system, providing theoretical support for its on-site application in power systems.
The high polarizability of Rydberg atoms enables the multi-parameters measurement of electromagnetic fields. In this paper, we report on an atomic antenna based on Rydberg atoms in a room temperature vapor cell. The EIT is a destructive interference spectroscopy with a narrow linewidth and can be used to detect small electric fields through Autler-Townes splitting or Stark shifts. In our experiments, we employ cascade-type two-photon excitation electromagnetically induced transparency (EIT) spectroscopy to measure the shift of the Rydberg energy level. We introduce a low-frequency electric field (~kHz frequency) using a built-in electrode technique in the cesium cell. The interaction between the Rydberg atom and electric field induces the Stark shifts, where the amplitude of the electric field is converted into corresponding two-photon detuning by the EIT effect. Furthermore, the amplitude of the low-frequency electric field is converted into an intensity signal of EIT probe beam. Under weak field conditions, it is an approximate linear relationship between EIT transmission signal and input electric field amplitude, enabling measurement of waveform, amplitude, and frequency. We have demonstrated optical measurements of low-frequency electric field using Rydberg atoms. By increasing the power of probe beam and coupling beam, the EIT can increase the response bandwidth from ~MHz to hundreds of MHz. This provides a scalable approach for measuring high-frequency electric fields.
Rydberg-assisted atomic electrometry with thermal vapors offers a promising approach for detecting external electric fields. However, this technique presents significant challenges for measuring low frequencies due to the effects of metal-alkali atoms adsorbed on the interior surface of the vacuum chamber. In this work, we apply high-contrast Rydberg electromagnetically induced transparency (EIT) spectroscopy to systematically investigate these effects, including the influence of laser power and electric field strength. We demonstrate the ability to measure electric field frequencies ranging from 10 Hz to 1 MHz. Additionally, this study identifies a fundamental limit for data capacity in such measurements. Furthermore, we propose a method for precise Stark shift measurements by locking the coupling laser to Zeeman-split Rydberg EIT peaks. Using the Zeeman shift in a reference cell as a stable frequency reference, we are able to track Stark-induced shifts in a science cell and confirm excellent agreement with theoretical predictions. These results provide valuable insights for future precision measurement techniques and field sensing applications based on Rydberg atom systems.
A Rydberg atom is a special type of atom characterized by a high principal quantum number. Electric field sensors based on Rydberg atoms have received widespread attention due to their high polarizability. However, there is currently little research on the use of Rydberg atoms for direct current (DC) or low-frequency electric fields, mainly due to the shielding effect of atomic vapor cells in low-frequency electric fields, which makes accurate measurement of the electric fields extremely challenging. In this paper, we construct a Rydberg ladder configuration by using probe laser at 852 nm and coupling laser at 510 nm in a room-temperature cesium vapor cell with integrated electrode plates, thereby enabling the realizing of a Floquet-EIT (electromagnetically induced transparency) spectrum dressed by a radio frequency (RF) field in the presence of a DC electric field. We further study the influence of DC electric field on spectral characteristic. Experimentally, it is observed that when only the RF electric field is applied, the EIT spectrum displays solely even-order sidebands. Furthermore, when both the RF field and the DC electric field are simultaneously present, the first-order sideband signal of the Floquet-EIT is observed. As the intensity of the DC electric field increases, the amplitude of the first-order sideband gradually increases. However, increasing the DC electric field to a sufficient magnitude induces sideband interference, which leads the sideband amplitudes to decrease. Furthermore, increasing the RF frequency can alleviate the interference effects induced by the DC electric field on the first-order sideband. Finally, comparing the relative standard deviation of the sideband amplitudes of the Floquet-EIT spectra with the frequency shifts of the DC-Stark spectra under weak DC electric fields, we find that the measurement accuracy of the former is significantly superior to that of the latter. This work makes use of a Cs atomic vapor cell with an integrated electrode to avoid shielding effects. By observing Floquet-EIT spectra, the response of the spectra to DC electric fields is investigated. This experiment provides novel insights into the quantum sensing measurements of DC and low-frequency electric fields.
The large electric dipole moment of the Rydberg atom allows for strong coupling with weak electric fields, and is widely used in electric field measurements because of its reproducibility, precision and stability. The combination of Rydberg atoms and electromagnetically induced transparency (EIT) technology has been used for detecting and characterizing radio-frequency (RF) electric fields. In this work, by selecting probe light (852 nm), dressed light (1470 nm), and coupled light (780 nm), the Rydberg state (49P3/2) of Cs atom is prepared by using a three-photon excitation scheme through using all-infrared light excitation of Rydberg atoms. We experimentally observe the EIT spectra of the Rydberg states decorated by radio-frequency electric fields, which optically detects Rydberg atoms. The effect of the amplitude and frequency of the RF electric field on the spectrum is explored in light of changes in the EIT spectrum. The results show that in the region of weak electric field, only the ac Stark energy shift and spectral broadening occur. As the electric field is further enhanced, the sideband phenomenon occurs in both the primary peak and secondary peak of the EIT. In the region of strong field, the Rydberg energy level produces a series of Floquet states with higher-order terms, as well as state shifting and mixing, resulting in asymmetry in the spectra of the EIT sideband peaks. The effect of frequency on the shielding effect of the Cs vapor cell is further discussed based on the shift of the main peak of the EIT. The demodulation of the electric field in a range of 50 Hz–1 kHz with a fidelity of 95% is achieved by modulating the low-frequency electric field to the RF electric field. The results can provide valuable references for spectral detection and traceable measurements of low-frequency electric fields.
Abstract Atom-based electromagnetic field sensing is a highly precise and sensitive technique for measuring and detecting electromagnetic fields, based on the principles of the Rydberg electromagnetically induced transparency (EIT). In this study, we simulate an atom-based electric field measurement system using a four-level system of rubidium atoms. We solve the steady-state solution of the Lindblad master equation using a Hamiltonian that contains information about rubidium properties and the external electric field. We observe that the splitting of the EIT signal is directly proportional to the intensity of the applied electric field, making it a highly sensitive method for electromagnetic field sensing. In addition, we investigate the effect of laser detuning and Rabi frequency on the linewidth and signal strength of the EIT signal in order to obtain optimal parameters for future experiments. This study provides insights into optimizing the EIT signal for electromagnetic fields detection, with potential benefits for future developments in this field.
In Rydberg quantum electric field sensing, the amplitude and linewidth of electromagnetically induced transparency (EIT) spectra significantly impact the accuracy of electric field measurements. This paper discusses the influence of atomic density on the amplitude and linewidth of EIT spectra in a vapor cell within a three-level ladder system driven by two-photon excitation. Due to the adsorption of alkali metal atoms on the inner surface of the vapor cell, the study utilizes light-induced atomic desorption effects to regulate the atomic density using LED light. This approach, combined with probe and coupling lasers, results in the formation of high-amplitude, low-linewidth EIT spectra. Based on the Rydberg atom sensing measurement system constructed in this study, when the number of atoms per cubic meter is less than 1.5×10 24 , a decrease in the optical depth at the bottom of the EIT leads to a reduction in amplitude and an increase in linewidth. When the number of atoms per cubic meter exceeds 4×10 24 , a decrease in the peak value at the top of the EIT results in a reduction in amplitude, with a slight decrease in linewidth. By adjusting the atomic density within the vapor cell through the power of desorption light and optimizing the laser Rabi frequency parameters, the atomic number density is maintained between 1.5×10 24 and 4×10 24 per cubic meter, yielding high-amplitude, low-linewidth EIT spectra. Additionally, the influence of introducing 365 nm desorption light on the accuracy of the constructed electric field measurement system is analyzed and corrected.