Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Distance and time limit on quantum control under decoherence (本文)

コウヘイ コバヤシ, Kōhei Kobayashi, 幸平 小林

Published Jan 1, 2020• 0 citations
OpenAlex

Abstract

To realize quantum information technologies, a technique of quantum control for preparing a desired quantum state used for an information resource plays an important role.For example, the measurement-based feedback control is a powerful method and many notable experiments have been demonstrated in superconducting qubit.However, in spite of the large impacts and development of those technologies, decoherence, which is the loss of quantum properties, is the fundamental and biggest obstacle.Due to it, the quantum state collapses to the classical state and the actual control performance is sometimes far away from the ideal one.Therefore, in considering the practical quantum

Related papers

Bound on the distance between controlled quantum state and target state under decoherence

Kohei Kobayashi

Abstract To implement quantum information technologies, carefully designed control for preparing a desired state plays a key role. However, in realistic situation, the actual performance of those methodologies is severely limited by decoherence. Therefore, it is important to evaluate how close we can steer the controlled state to a desired target state under decoherence. In this paper, we provide an upper bound of the distance between the two controlled quantum systems in the presence and absence of decoherence. The bound quantifies the degree of achievement of the control for a given target state under decoherence, and can be straightforwardly calculated without solving any equation. Moreover, the upper bound is applied to derive a theoretical limit of the probability for obtaining the target state under decoherence.

arXiv:2303.06466•Journal of Physics Communications•Jan 1, 2024•0 citations

Control limit on quantum state preparation under decoherence

K. Kobayashi, Naoki Yamamoto

Quantum information technologies require careful control for generating and preserving a desired target quantum state. The biggest practical obstacle is of course decoherence. Therefore, the reachability analysis, which in our scenario aims to estimate the distance between the controlled state under decoherence and the target state, is of great importance to evaluate the realistic performance of those technologies. This paper presents a lower bound of the fidelity-based distance for a general open Markovian quantum system driven by the decoherence process and several types of control including feedback. The lower bound is straightforward to calculate and can be used as a guide for choosing the target state, as demonstrated in some examples. Moreover, the lower bound is applied to derive a theoretical limit in some quantum metrology problems based on a large-size atomic ensemble under control and decoherence.

arXiv:1905.12250•Physical Review A•May 28, 2019•6 citations

Decoherence Control in Open Quantum Systems for Scalable Quantum Technologies

Muhammad Saleem Samejo, Sibghatullah Khoso, Ihsan Ahmed +1 more

Quantum communication provides essentially secure transmission of information and quantum sensing provides measurement sensitivities better than classical. These powers come because of unique quantum processes, especially superposition and entanglement. Although there is a significant theoretical and experimental development, the phenomenon of decoherence is still one of the main limiting factors in performance and scalability of quantum devices. The importance of this study is that it considers an active approach to decoherence as one of the key impediments to scalable quantum technologies. Although the research on the noise sources and error mechanisms has been done extensively, the characterization is not enough to be applied to the real world. This study makes use of a theoretical and computation effort to explore scalable quantum technologies integrated decoherence control strategies. The research paper is based on the open quantum systems framework, in which quantum systems are represented as finite-dimensional systems that interact with the external environment. The findings of the study highlight that active decoherence control plays an important role in enhancing performance of open quantum systems. Without any control, the simulated quantum system is characterized by a fast decoherence time, coherence times are short, about 20 u ms, and the physical error rate is about 2.5%. The hybrid strategy is a feasible way to achieve fault-tolerant quantum operation and the transition point between theory-based control architectures and experimental hardware limitations, thus speeding up the development of reliable large-scale quantum technologies. The findings affirm that each of the isolated methods like dynamical decoupling, quantum error correction, or reservoir engineering can only be a partial solution when used alone. Adaptive and real-time control schemes responding dynamically to changing noise environments also require further research to develop them.

Social science review archives.•Jan 12, 2026•0 citations

Quantum Measurement and Control

Claus Kiefer

In the last two decades there has been an enormous progress in the experimental investigation of single quantum systems. This progress covers fields such as quantum optics, quantum computation, quantum cryptography, and quantum metrology, which are sometimes summarized as `quantum technologies'. A key issue there is entanglement, which can be considered as the characteristic feature of quantum theory. As disparate as these various fields maybe, they all have to deal with a quantum mechanical treatment of the measurement process and, in particular, the control process. Quantum control is, according to the authors, `control for which the design requires knowledge of quantum mechanics'. Quantum control situations in which measurements occur at important steps are called feedback (or feedforward) control of quantum systems and play a central role here. This book presents a comprehensive and accessible treatment of the theoretical tools that are needed to cope with these situations. It also provides the reader with the necessary background information about the experimental developments. The authors are both experts in this field to which they have made significant contributions. After an introduction to quantum measurement theory and a chapter on quantum parameter estimation, the central topic of open quantum systems is treated at some length. This chapter includes a derivation of master equations, the discussion of the Lindblad form, and decoherence – the irreversible emergence of classical properties through interaction with the environment. A separate chapter is devoted to the description of open systems by the method of quantum trajectories. Two chapters then deal with the central topic of quantum feedback control, while the last chapter gives a concise introduction to one of the central applications – quantum information. All sections contain a bunch of exercises which serve as a useful tool in learning the material. Especially helpful are also various separate boxes presenting important background material on topics such as the block representation or the feedback gain-bandwidth relation. The two appendices on quantum mechanics and phase-space and on stochastic differential equations serve the same purpose. As the authors emphasize, the book is aimed at physicists as well as control engineers who are already familiar with quantum mechanics. It takes an operational approach and presents all the material that is needed to follow research on quantum technologies. On the other hand, conceptual issues such as the relevance of the measurement process for the interpretation of quantum theory are neglected. Readers interested in them may wish to consult instead a textbook such as Decoherence and the Quantum-to-Classical Transition by Maximilian Schlosshauer. Although the present book does not contain applications to gravity, part of its content might become relevant for the physics of gravitational-wave detection and quantum gravity phenomenology. In this respect it should be of interest also for the readers of this journal.

Classical and Quantum Gravity•Nov 29, 2010•1,004 citations

Generalized quantum measurement and its applications in quantum information

이종찬

Quantum physics, which began in the early 20th century, has revolutionized the way we understand the world. Blessing of quantum physical notions made our understanding of nature more complete in atomic electronic structure, photoelectric effect, periodic table, chemical interaction, electronic semiconductor physics, and many more. Although the quantum physics and the following semiconductor physics has driven the computer chip industry and the information age, most of the conventional modern technologies are based on or explained by classical physics. Recently, however, attempts to directly utilize quantum physical properties for information technology gave birth to a newly emerging field of quantum information science. Quantum measurement is not only at the heart of deep questions in quantum physics, but also plays an essential role in realizing quantum information science. In this thesis, many aspects of generalized quantum measurement and some other quantum resources for the application in quantum information are studied. \n \nThe biggest obstacle in realizing quantum information science to a practical level is decoherence, i.e. environment induced loss of quantum coherence. Here, I experimentally study a method to suppress decoherence using weak quantum measurements. Quantum measurements are typically understood as destructive to quantum coherence. By carefully designing a protocol with a more generalized form of quantum measurement, however, the decoherence could be effectively tackled. \n \nDecoherence is also detrimental to quantum entanglement, which is an essential resource to many quantum information protocols. In some cases, the entanglement can be completely lost due to decoherence: the phenomenon called entanglement sudden death. It is experimentally demonstrated in the thesis that the entanglement loss and sudden death can be circumvented with weak measurements. \n \nNext, delayed-choice decoherence suppression scheme is proposed and experimentally demonstrated. Using entangled pair of qubits, it is possible to postpone the decision to suppress decoherence even after the decoherence itself. This protocol can be an important addition to methods for suppressing Markovian noise. \n \nQuantum measurement in the position and momentum variables are also studied. Specifically, I propose and analyze the method to probe the commutation relation of position and momentum operators with interference. \n \nOne of the most important photonic quantum resource is the quantum memory. For fully utilizing spatial multimode capacity of quantum memories, spatial quantum coherence should be preserved during write-read process. In this thesis, the preservation of spatial coherence of an optical pulse in an atomic vapor quantum memory is studied. \n \nAdditionally, the methods to prepare photonic quantum resources, such as quantum light source and atom-photon interface, are discussed in the text. The effect of pump focusing in spontaneous parametric down-conversion is studied in detail.

•Jan 1, 2015•0 citations

Quantum control of a single qubit

Agata M. Brańczyk, Paulo E. M. F. Mendonça, Alexei Gilchrist +2 more

Measurements in quantum mechanics cannot perfectly distinguish all states and necessarily disturb the measured system. We present and analyze a proposal to demonstrate fundamental limits on quantum control of a single qubit arising from these properties of quantum measurements. We consider a qubit prepared in one of two nonorthogonal states and subsequently subjected to dephasing noise. The task is to use measurement and feedback control to attempt to correct the state of the qubit. We demonstrate that projective measurements are not optimal for this task, and that there exists a nonprojective measurement with an optimum measurement strength which achieves the best trade-off between gaining information about the system and disturbing it through measurement backaction. We study the performance of a quantum control scheme that makes use of this weak measurement followed by feedback control, and demonstrate that it realizes the optimal recovery from noise for this system. We contrast this approach with various classically inspired control schemes.

arXiv:quant-ph/0608037•Physical Review A•Jan 24, 2007•82 citations
To realize quantum information technologies, a technique of quantum control for preparing a desired quantum state used for an information resource plays an important role.For example, the measurement-based feedback control is a powerful method and many notable experiments have been demonstrated in superconducting qubit.However, in spite of the large impacts and development of those technologies, decoherence, which is the loss of quantum properties, is the fundamental and biggest obstacle.Due to it, the quantum state collapses to the classical state and the actual control performance is sometimes far away from the ideal one.Therefore, in considering the practical quantum
Abstract To implement quantum information technologies, carefully designed control for preparing a desired state plays a key role. However, in realistic situation, the actual performance of those methodologies is severely limited by decoherence. Therefore, it is important to evaluate how close we can steer the controlled state to a desired target state under decoherence. In this paper, we provide an upper bound of the distance between the two controlled quantum systems in the presence and absence of decoherence. The bound quantifies the degree of achievement of the control for a given target state under decoherence, and can be straightforwardly calculated without solving any equation. Moreover, the upper bound is applied to derive a theoretical limit of the probability for obtaining the target state under decoherence.
Quantum information technologies require careful control for generating and preserving a desired target quantum state. The biggest practical obstacle is of course decoherence. Therefore, the reachability analysis, which in our scenario aims to estimate the distance between the controlled state under decoherence and the target state, is of great importance to evaluate the realistic performance of those technologies. This paper presents a lower bound of the fidelity-based distance for a general open Markovian quantum system driven by the decoherence process and several types of control including feedback. The lower bound is straightforward to calculate and can be used as a guide for choosing the target state, as demonstrated in some examples. Moreover, the lower bound is applied to derive a theoretical limit in some quantum metrology problems based on a large-size atomic ensemble under control and decoherence.
Quantum communication provides essentially secure transmission of information and quantum sensing provides measurement sensitivities better than classical. These powers come because of unique quantum processes, especially superposition and entanglement. Although there is a significant theoretical and experimental development, the phenomenon of decoherence is still one of the main limiting factors in performance and scalability of quantum devices. The importance of this study is that it considers an active approach to decoherence as one of the key impediments to scalable quantum technologies. Although the research on the noise sources and error mechanisms has been done extensively, the characterization is not enough to be applied to the real world. This study makes use of a theoretical and computation effort to explore scalable quantum technologies integrated decoherence control strategies. The research paper is based on the open quantum systems framework, in which quantum systems are represented as finite-dimensional systems that interact with the external environment. The findings of the study highlight that active decoherence control plays an important role in enhancing performance of open quantum systems. Without any control, the simulated quantum system is characterized by a fast decoherence time, coherence times are short, about 20 u ms, and the physical error rate is about 2.5%. The hybrid strategy is a feasible way to achieve fault-tolerant quantum operation and the transition point between theory-based control architectures and experimental hardware limitations, thus speeding up the development of reliable large-scale quantum technologies. The findings affirm that each of the isolated methods like dynamical decoupling, quantum error correction, or reservoir engineering can only be a partial solution when used alone. Adaptive and real-time control schemes responding dynamically to changing noise environments also require further research to develop them.
In the last two decades there has been an enormous progress in the experimental investigation of single quantum systems. This progress covers fields such as quantum optics, quantum computation, quantum cryptography, and quantum metrology, which are sometimes summarized as `quantum technologies'. A key issue there is entanglement, which can be considered as the characteristic feature of quantum theory. As disparate as these various fields maybe, they all have to deal with a quantum mechanical treatment of the measurement process and, in particular, the control process. Quantum control is, according to the authors, `control for which the design requires knowledge of quantum mechanics'. Quantum control situations in which measurements occur at important steps are called feedback (or feedforward) control of quantum systems and play a central role here. This book presents a comprehensive and accessible treatment of the theoretical tools that are needed to cope with these situations. It also provides the reader with the necessary background information about the experimental developments. The authors are both experts in this field to which they have made significant contributions. After an introduction to quantum measurement theory and a chapter on quantum parameter estimation, the central topic of open quantum systems is treated at some length. This chapter includes a derivation of master equations, the discussion of the Lindblad form, and decoherence – the irreversible emergence of classical properties through interaction with the environment. A separate chapter is devoted to the description of open systems by the method of quantum trajectories. Two chapters then deal with the central topic of quantum feedback control, while the last chapter gives a concise introduction to one of the central applications – quantum information. All sections contain a bunch of exercises which serve as a useful tool in learning the material. Especially helpful are also various separate boxes presenting important background material on topics such as the block representation or the feedback gain-bandwidth relation. The two appendices on quantum mechanics and phase-space and on stochastic differential equations serve the same purpose. As the authors emphasize, the book is aimed at physicists as well as control engineers who are already familiar with quantum mechanics. It takes an operational approach and presents all the material that is needed to follow research on quantum technologies. On the other hand, conceptual issues such as the relevance of the measurement process for the interpretation of quantum theory are neglected. Readers interested in them may wish to consult instead a textbook such as Decoherence and the Quantum-to-Classical Transition by Maximilian Schlosshauer. Although the present book does not contain applications to gravity, part of its content might become relevant for the physics of gravitational-wave detection and quantum gravity phenomenology. In this respect it should be of interest also for the readers of this journal.
Quantum physics, which began in the early 20th century, has revolutionized the way we understand the world. Blessing of quantum physical notions made our understanding of nature more complete in atomic electronic structure, photoelectric effect, periodic table, chemical interaction, electronic semiconductor physics, and many more. Although the quantum physics and the following semiconductor physics has driven the computer chip industry and the information age, most of the conventional modern technologies are based on or explained by classical physics. Recently, however, attempts to directly utilize quantum physical properties for information technology gave birth to a newly emerging field of quantum information science. Quantum measurement is not only at the heart of deep questions in quantum physics, but also plays an essential role in realizing quantum information science. In this thesis, many aspects of generalized quantum measurement and some other quantum resources for the application in quantum information are studied. \n \nThe biggest obstacle in realizing quantum information science to a practical level is decoherence, i.e. environment induced loss of quantum coherence. Here, I experimentally study a method to suppress decoherence using weak quantum measurements. Quantum measurements are typically understood as destructive to quantum coherence. By carefully designing a protocol with a more generalized form of quantum measurement, however, the decoherence could be effectively tackled. \n \nDecoherence is also detrimental to quantum entanglement, which is an essential resource to many quantum information protocols. In some cases, the entanglement can be completely lost due to decoherence: the phenomenon called entanglement sudden death. It is experimentally demonstrated in the thesis that the entanglement loss and sudden death can be circumvented with weak measurements. \n \nNext, delayed-choice decoherence suppression scheme is proposed and experimentally demonstrated. Using entangled pair of qubits, it is possible to postpone the decision to suppress decoherence even after the decoherence itself. This protocol can be an important addition to methods for suppressing Markovian noise. \n \nQuantum measurement in the position and momentum variables are also studied. Specifically, I propose and analyze the method to probe the commutation relation of position and momentum operators with interference. \n \nOne of the most important photonic quantum resource is the quantum memory. For fully utilizing spatial multimode capacity of quantum memories, spatial quantum coherence should be preserved during write-read process. In this thesis, the preservation of spatial coherence of an optical pulse in an atomic vapor quantum memory is studied. \n \nAdditionally, the methods to prepare photonic quantum resources, such as quantum light source and atom-photon interface, are discussed in the text. The effect of pump focusing in spontaneous parametric down-conversion is studied in detail.
Measurements in quantum mechanics cannot perfectly distinguish all states and necessarily disturb the measured system. We present and analyze a proposal to demonstrate fundamental limits on quantum control of a single qubit arising from these properties of quantum measurements. We consider a qubit prepared in one of two nonorthogonal states and subsequently subjected to dephasing noise. The task is to use measurement and feedback control to attempt to correct the state of the qubit. We demonstrate that projective measurements are not optimal for this task, and that there exists a nonprojective measurement with an optimum measurement strength which achieves the best trade-off between gaining information about the system and disturbing it through measurement backaction. We study the performance of a quantum control scheme that makes use of this weak measurement followed by feedback control, and demonstrate that it realizes the optimal recovery from noise for this system. We contrast this approach with various classically inspired control schemes.