Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

インコヒーレント光源の1光子吸収によるイオントラップへのイオンローディング法

タロウ ハセガワ, Taro Hasegawa, 太郎 長谷川

Published Jan 1, 2018• 0 citations
OpenAlex

Abstract

イオントラップ中のレーザー冷却された原子イオンは、量子計算機の基本素子や究極の原子時計の実現といった、基礎的な物理学研究への応用が期待されている。このような目的のために、効率の良い原子イオンの導入が必要である。通常、中性の原子ビームをイオントラップ中に導入し、その中でイオン化する。イオン化には従来は主に2つの手段が実施されてきた。1つは熱電子による衝突イオン化、もう1つはレーザー光による2光子イオン化である。熱電子衝突イオン化では、真空系が汚れるなど、前述の応用にはあまり適切な方法ではない。一方で、レーザーイオン化では、同位体の選択ができる、真空系をあまり汚さないなど、大きな利点があるが、イオン生成効率が低いという難点がある。 本研究では、新しいイオン化の方法として、インコヒーレント光を用いた1光子光イオン化を行い、それにより実際にバリウムイオンのレーザー冷却を行った。1光子イオン化は、2光子イオン化よりもかなり高い頻度で起きるため、生成効率が高く、レーザーのような強力な光源を使わなくても十分に多くのイオン化が可能であり、真空系を汚すこともない。 1光子イオン化には紫外光を必要とする。本研究では、重水素ランプと深紫外発光ダイオード(UVLED)を使用する。重水素ランプは波長185nm以上の紫外光を発生させる。これは、バリウムのイオン化エネルギー以上のエネルギーを持っているので、1光子イオン化できる。また、UVLEDでは、波長350nm、280nm、245nmの各種の発光ダイオードを使ってバリウム原子のイオン化を試みた。波長350nmと280nmのUVLEDではイオン化エネルギーに不足しているが、245nmはほぼイオン化エネルギーに相当する光子を放出するため、1光子イオン化できる。この実験の結果、重水素ランプと波長245nmのUVLEDによって、実際にバリウムイオンがイオントラップ中にローディングできることを確かめることができた。 Laser-cooled atomic ions in ion traps are expected to be applied to basic physics studies such as qubits of quantum computers and realization of precise atomic clocks. For such purpose, efficient ion loading into the ion trap is necessary. Usually, neutral atomic beams are introduced into the trap, and the ionization is carried out inside the trap. In the past, two main approaches to ionization have been implemented. One is impact ionization by thermal electrons, and the other is two-photon ionization by lasers. Collisional ionization of thermal electrons is not a suitable method for the above-mentioned applications, such as vacuum contamination. Laser photoionization has great advantages such as isotope selectivity and less contamination of the vacuum system, but has the disadvantage of low ion generation efficiency. In this study, as a novel ionization method, one-photon photoionization using incoherent light has been carried out, and laser cooling of barium ions has been actually performed. One-photon ionization occurs more often than two-photon ionization, and therefore it has high generation efficiency. Moreover, no lasers are required for ionization, and the vacuum contamination is minimized. Ultraviolet light is required for one-photon ionization. In this study, deuterium lamp and deep ultraviolet light emitting diode (UVLED) are used. Deuterium lamps generate ultraviolet light with a wavelength of 185 nm and longer. Since it has energy higher than the ionization energy of barium, it can be used for one-photon ionization. In UVLED, we try to ionize barium atoms using UVLEDs with wavelengths of 350 nm, 280 nm and 245 nm. While photon energy of UVLEDs with 350 nm and 280 nm is less than the ionization energy, 245 nm emits photons that is roughly the same as the ionization energy. Hence, one-photon ionization is expected. As a result, it has been confirmed that barium ions are indeed loaded into the ion trap by the deuterium lamp and the UV LED of wavelength 245 nm.

Related papers

Selective Loading of Rare Calcium Isotope 43Ca+ using Photo-Ionization

Isamu Morita, U. Tanaka, Shinji Urabe

Rare calcium isotope 43Ca+ ion (0.135%) is the only naturally abundant isotope with hyperfine structure. This isotope is considered an attractive candidate both for an optical frequency standard and for quantum information processing. We report a method to load 43Ca+ ions selectively into a linear Paul trap using a two-step, resonant photo-ionization process. Isotope selectivity is achieved by utilizing the isotope shifts for the resonant 4s2 1S0-4s4p 1P1 transition of neutral calcium. The second non-resonant excitation is achieved by an ultraviolet light emitting diode (LED). The use of an LED is simpler and more economical than using a laser for the second transition. Additionally the laser cooling of 43Ca+ is demonstrated using two ultraviolet-diode lasers and two infrared-diode lasers. Due to the hyperfine structure, the laser requirements for Doppler cooling 43Ca+ are more demanding than for the other isotopes.

The Review of Laser Engineering•Jan 1, 2007•0 citations

量子フラストレート系シミュレーションのためのイオントラップ開発

タロウ ハセガワ, Taro Hasegawa, 太郎 長谷川

本研究では、微小な「2次元イオントラップアレイ」を作製することが目的である。本装置に原子イオンを束縛し、レーザー冷却することで、「フラストレート系」の量子状態を実現し、その状態の量子シミュレーションを行うことが最終的な目標である。 イオントラップは荷電粒子を束縛することができる装置である。本研究では、2次元的に微小なイオントラップを複数配置し、各イオントラップに1個ずつ原子イオン(バリウムイオンを想定)を束縛する。フラストレート系は3個の微小イオントラップを正三角形に配置することで実現できる。各イオンの間にはクーロン相互作用が働くため、イオンの位置によってエネルギーが異なる。この作用を利用してフラストレート系を実現する。 本研究期間では、2次元イオントラップアレイの設計およびその製作を行った。本研究では、以前の研究で製作した「弦イオントラップ」をさらに発展させ、「ツイスト弦イオントラップ」を製作することにした。ツイスト弦イオントラップでは、イオントラップに使用する電極をすべて細い金属弦(直径0.05 mmのタングステンワイヤー)で製作する。それにより、トラップするバリウムイオンからのレーザー誘起蛍光を外部より高い感度で計測できる。また、金属弦をねじれた関係で配置することにより、電極数が少なくても3次元的にイオンを束縛できる。このとき、ねじり角を大きくすることで、イオントラップの大きさを小さくすることもできる。このことから、ツイスト弦イオントラップによって微小な2次元イオントラップアレイを実現できる。 本研究では3つの微小イオントラップを2次元的に配置するツイスト弦イオントラップを設計し、そのための100個以上の部品を製作した。今後はこのパーツを組立て、実際にイオントラップとして動作させる。 The aim of this study is to fabricate a small-scale "2D ion trap array". By confining and laser-cooling atomic ions in this device, the quantum state of a "frustrated system" is realized, and eventually quantum simulations of this state can be done. An ion trap is a device to confine charged particles. In this study, several small-scale ion traps are arranged in a two-dimensional configuration, and one atomic ion (barium ion is assumed) is trapped in each ion trap. The frustrated system can be realized by arranging three small ion traps in an equilateral triangle. Because of the Coulomb interaction among the ions, energy varies depending on the position of the ions. This interaction is utilized to achieve the frustrated system. During this research period, a 2D ion trap array has been designed and fabricated. In this study, the "string ion trap", which was previously fabricated, is developed further into a "twisted string ion trap". In the twisted string ion trap, all the electrodes used in the ion trap are made of thin metal strings (tungsten wires with a diameter of 0.05 mm). This allows us to observe the laser-induced fluorescence from the trapped barium ion with higher sensitivity. Additionally, by arranging the metal strings in a twisted configuration, ions can be trapped in three dimensions with fewer electrodes. By increasing the degree of twist, we can also reduce the size of the ion trap. As a result, a small-scale 2D ion trap array can be realized using the twisted string ion trap. In this study, a twisted string ion trap that consists of three small ion traps in a 2D configuration is designed, and more than 100 parts for it are fabricated. In future, these parts are to be assembled for actual operation of the ion trap.

•Jan 1, 2022•0 citations

1次元系における非時間順序積と量子カオス

Ryosuke Yoshii

決定論的な理論にしたがっていても初期値鋭敏性により将来が予測できないような現象をカオスと呼ぶ。自然界にはカオス性を持った現象が多く存在する。\n 古典系では、初期条件がわずかに異なる粒子の軌跡が時間変化とともに指数関数的に離れていくとき、その指数(リャプノフ指数)をカオス性の特徴づけとして用いる。しかし、古典力学においてカオス性を示す系を量子力学によって扱うと、通常のカオス性の特徴付けが不可能になる場合がある。これは量子系において軌跡という概念が使えなくなることに起因する。\n 近年、軌跡を用いない、量子系でのカオス性の特徴付けの方法として、非時間順序積と呼ばれる物理量が注目されている。この量の時間変化を見ると、その指数増大に対する指数として古典系でのリャプノフ指数に対応する量が得られるという主張があるが、古典系でカオス性を示さない系でリャプノフ指数が有限となる場合や、古典系でカオス性を示す系で指数増大が生じない場合があるという指摘がある。\n 本稿では古典系でカオス性を示さない1次元系のセットアップで非時間順序積を解析し、この場合におけるリャプノフ指数の計算を行う。古典力学ではこの系はカオス性を持たないが、非時間順序積には指数増大が見られた。

•Mar 31, 2021•0 citations

Rapid high-purity loading of barium ion via relayed selectivity from naturally abundant source

Zichun Zhou, Xuhui Yao, Jiaze Li +5 more

Trapped ions is one of the promising platforms for realizing quantum information processing and quantum simulation. Selective and rapid loading of a specific isotope lays the critical foundation for such purpose particularly when scaling up the system size. Here we demonstrate a new method for rapid isotope-selective loading of $^{137}\mathrm{Ba}^{+}$ or $^{135}\mathrm{Ba}^{+}$, two types of promising ion qubits, from naturally abundant source using a three-step, ultraviolet-free photoionization scheme. Neutral atoms are selected on the narrow 791 nm $6s^2\,{}^1S_0\rightarrow6s6p\,{}^3P_1^o$ transition, resonantly transferred at 554 nm to $6s6d\,{}^3D_1$, and ionized using an existing 532 nm Raman beam. A spectral-overlap analysis based on isotope and hyperfine shifts shows relayed selectivity that the second step can further suppress undesired-isotope excitation and no contaminant ion is detected during our entire experiment. Besides, the resonant drive of the second step excitation yields a prominent loading rate of the selected species. This strategy using multi-step excitations to establish relayed selectivity can be extended to high-purity loading of other species of ions.

arXiv:2611.11990•Nov 9, 2026•0 citations

マイクロ波―光量子インターフェースに向けた 光導波路結合型ダイヤモンドオプトメカニカル結晶デバイスの光学評価

佐藤清貴, 黒川穂高, 関口雄平 +16 more

誤り耐性超伝導量子コンピュータの実現には 100 万を超える量子ビットが必要とされており、それに伴う配線数の増大も空間の制約や熱流入の増大の観点から解決すべき課題となっている。マイクロ波配線を広帯域かつ低熱流入の光ファイバに変えることで配線数の劇的な削減が期待されているが、それには高効率かつ低ノイズ、超低消費電力の量子トランスデューサが必要となる。ただし、これらの要求性能を実用に十分なレベルで両立させたシステムは未だ開発途上である。我々のグループでは、オプトメカニカル共振器中のダイヤモンド色中心と単一光子の相互作用を利用した超低消費電力量子トランスデューサの実現を目指し開発を進めている。高変換効率の達成には、空間受光系と比較して光子収集効率が大幅に向上する光導波路を介した色中心へのアクセスが不可欠である。さらに、超伝導量子ビットのチップ間を高速に接続して大規模な誤り訂正符号を実現するためには、多数のトランスデューサを並列動作させる必要があり、集積可能な構成が求められる。本研究ではトランスデューサに必須の要素である、光導波路チップ上へのダイヤモンドオプトメカニカル結晶の配置、その冷凍機温度(4 K)での動作実証、更にパーセル効果を介したオプトメカニカル結晶と色中心との光学結合の観測を行った。本成果は、ダイヤモンドを用いたマイクロ波-光量子トランスデューサの集積化に向けた重要な技術的進歩である。

•Mar 18, 2026•0 citations

An efficient method for producing 9Be+ ions using a 2 + 1 resonance-enhanced multiphoton ionization process

Min Li, Yong Zhang, Qian-Yu Zhang +4 more

Abstract We report a method of creating pure 9Be+ ions by a 2 + 1 resonance-enhanced multiphoton ionization for the ionization potential of 75 192.64(6) cm−1 (133 nm). The efficient generation of 9Be+ ions has been realized in a segmented linear ion trap. The average loading rates with a 10 ns, 1 mJ laser at 310 nm and 306 nm are 3.8 and 1.3 ions per pulse, respectively. This method has the advantage of reducing the electron contamination to the ion trap electrodes greatly. It also reduces the requirement of single-photon energy while satisfying the need for ionization probability and can be applied to other atoms with high ionization thresholds.

Journal of Physics B Atomic Molecular and Optical Physics•Jan 18, 2022•9 citations
イオントラップ中のレーザー冷却された原子イオンは、量子計算機の基本素子や究極の原子時計の実現といった、基礎的な物理学研究への応用が期待されている。このような目的のために、効率の良い原子イオンの導入が必要である。通常、中性の原子ビームをイオントラップ中に導入し、その中でイオン化する。イオン化には従来は主に2つの手段が実施されてきた。1つは熱電子による衝突イオン化、もう1つはレーザー光による2光子イオン化である。熱電子衝突イオン化では、真空系が汚れるなど、前述の応用にはあまり適切な方法ではない。一方で、レーザーイオン化では、同位体の選択ができる、真空系をあまり汚さないなど、大きな利点があるが、イオン生成効率が低いという難点がある。 本研究では、新しいイオン化の方法として、インコヒーレント光を用いた1光子光イオン化を行い、それにより実際にバリウムイオンのレーザー冷却を行った。1光子イオン化は、2光子イオン化よりもかなり高い頻度で起きるため、生成効率が高く、レーザーのような強力な光源を使わなくても十分に多くのイオン化が可能であり、真空系を汚すこともない。 1光子イオン化には紫外光を必要とする。本研究では、重水素ランプと深紫外発光ダイオード(UVLED)を使用する。重水素ランプは波長185nm以上の紫外光を発生させる。これは、バリウムのイオン化エネルギー以上のエネルギーを持っているので、1光子イオン化できる。また、UVLEDでは、波長350nm、280nm、245nmの各種の発光ダイオードを使ってバリウム原子のイオン化を試みた。波長350nmと280nmのUVLEDではイオン化エネルギーに不足しているが、245nmはほぼイオン化エネルギーに相当する光子を放出するため、1光子イオン化できる。この実験の結果、重水素ランプと波長245nmのUVLEDによって、実際にバリウムイオンがイオントラップ中にローディングできることを確かめることができた。 Laser-cooled atomic ions in ion traps are expected to be applied to basic physics studies such as qubits of quantum computers and realization of precise atomic clocks. For such purpose, efficient ion loading into the ion trap is necessary. Usually, neutral atomic beams are introduced into the trap, and the ionization is carried out inside the trap. In the past, two main approaches to ionization have been implemented. One is impact ionization by thermal electrons, and the other is two-photon ionization by lasers. Collisional ionization of thermal electrons is not a suitable method for the above-mentioned applications, such as vacuum contamination. Laser photoionization has great advantages such as isotope selectivity and less contamination of the vacuum system, but has the disadvantage of low ion generation efficiency. In this study, as a novel ionization method, one-photon photoionization using incoherent light has been carried out, and laser cooling of barium ions has been actually performed. One-photon ionization occurs more often than two-photon ionization, and therefore it has high generation efficiency. Moreover, no lasers are required for ionization, and the vacuum contamination is minimized. Ultraviolet light is required for one-photon ionization. In this study, deuterium lamp and deep ultraviolet light emitting diode (UVLED) are used. Deuterium lamps generate ultraviolet light with a wavelength of 185 nm and longer. Since it has energy higher than the ionization energy of barium, it can be used for one-photon ionization. In UVLED, we try to ionize barium atoms using UVLEDs with wavelengths of 350 nm, 280 nm and 245 nm. While photon energy of UVLEDs with 350 nm and 280 nm is less than the ionization energy, 245 nm emits photons that is roughly the same as the ionization energy. Hence, one-photon ionization is expected. As a result, it has been confirmed that barium ions are indeed loaded into the ion trap by the deuterium lamp and the UV LED of wavelength 245 nm.
Rare calcium isotope 43Ca+ ion (0.135%) is the only naturally abundant isotope with hyperfine structure. This isotope is considered an attractive candidate both for an optical frequency standard and for quantum information processing. We report a method to load 43Ca+ ions selectively into a linear Paul trap using a two-step, resonant photo-ionization process. Isotope selectivity is achieved by utilizing the isotope shifts for the resonant 4s2 1S0-4s4p 1P1 transition of neutral calcium. The second non-resonant excitation is achieved by an ultraviolet light emitting diode (LED). The use of an LED is simpler and more economical than using a laser for the second transition. Additionally the laser cooling of 43Ca+ is demonstrated using two ultraviolet-diode lasers and two infrared-diode lasers. Due to the hyperfine structure, the laser requirements for Doppler cooling 43Ca+ are more demanding than for the other isotopes.
本研究では、微小な「2次元イオントラップアレイ」を作製することが目的である。本装置に原子イオンを束縛し、レーザー冷却することで、「フラストレート系」の量子状態を実現し、その状態の量子シミュレーションを行うことが最終的な目標である。 イオントラップは荷電粒子を束縛することができる装置である。本研究では、2次元的に微小なイオントラップを複数配置し、各イオントラップに1個ずつ原子イオン(バリウムイオンを想定)を束縛する。フラストレート系は3個の微小イオントラップを正三角形に配置することで実現できる。各イオンの間にはクーロン相互作用が働くため、イオンの位置によってエネルギーが異なる。この作用を利用してフラストレート系を実現する。 本研究期間では、2次元イオントラップアレイの設計およびその製作を行った。本研究では、以前の研究で製作した「弦イオントラップ」をさらに発展させ、「ツイスト弦イオントラップ」を製作することにした。ツイスト弦イオントラップでは、イオントラップに使用する電極をすべて細い金属弦(直径0.05 mmのタングステンワイヤー)で製作する。それにより、トラップするバリウムイオンからのレーザー誘起蛍光を外部より高い感度で計測できる。また、金属弦をねじれた関係で配置することにより、電極数が少なくても3次元的にイオンを束縛できる。このとき、ねじり角を大きくすることで、イオントラップの大きさを小さくすることもできる。このことから、ツイスト弦イオントラップによって微小な2次元イオントラップアレイを実現できる。 本研究では3つの微小イオントラップを2次元的に配置するツイスト弦イオントラップを設計し、そのための100個以上の部品を製作した。今後はこのパーツを組立て、実際にイオントラップとして動作させる。 The aim of this study is to fabricate a small-scale "2D ion trap array". By confining and laser-cooling atomic ions in this device, the quantum state of a "frustrated system" is realized, and eventually quantum simulations of this state can be done. An ion trap is a device to confine charged particles. In this study, several small-scale ion traps are arranged in a two-dimensional configuration, and one atomic ion (barium ion is assumed) is trapped in each ion trap. The frustrated system can be realized by arranging three small ion traps in an equilateral triangle. Because of the Coulomb interaction among the ions, energy varies depending on the position of the ions. This interaction is utilized to achieve the frustrated system. During this research period, a 2D ion trap array has been designed and fabricated. In this study, the "string ion trap", which was previously fabricated, is developed further into a "twisted string ion trap". In the twisted string ion trap, all the electrodes used in the ion trap are made of thin metal strings (tungsten wires with a diameter of 0.05 mm). This allows us to observe the laser-induced fluorescence from the trapped barium ion with higher sensitivity. Additionally, by arranging the metal strings in a twisted configuration, ions can be trapped in three dimensions with fewer electrodes. By increasing the degree of twist, we can also reduce the size of the ion trap. As a result, a small-scale 2D ion trap array can be realized using the twisted string ion trap. In this study, a twisted string ion trap that consists of three small ion traps in a 2D configuration is designed, and more than 100 parts for it are fabricated. In future, these parts are to be assembled for actual operation of the ion trap.
決定論的な理論にしたがっていても初期値鋭敏性により将来が予測できないような現象をカオスと呼ぶ。自然界にはカオス性を持った現象が多く存在する。\n 古典系では、初期条件がわずかに異なる粒子の軌跡が時間変化とともに指数関数的に離れていくとき、その指数(リャプノフ指数)をカオス性の特徴づけとして用いる。しかし、古典力学においてカオス性を示す系を量子力学によって扱うと、通常のカオス性の特徴付けが不可能になる場合がある。これは量子系において軌跡という概念が使えなくなることに起因する。\n 近年、軌跡を用いない、量子系でのカオス性の特徴付けの方法として、非時間順序積と呼ばれる物理量が注目されている。この量の時間変化を見ると、その指数増大に対する指数として古典系でのリャプノフ指数に対応する量が得られるという主張があるが、古典系でカオス性を示さない系でリャプノフ指数が有限となる場合や、古典系でカオス性を示す系で指数増大が生じない場合があるという指摘がある。\n 本稿では古典系でカオス性を示さない1次元系のセットアップで非時間順序積を解析し、この場合におけるリャプノフ指数の計算を行う。古典力学ではこの系はカオス性を持たないが、非時間順序積には指数増大が見られた。
Trapped ions is one of the promising platforms for realizing quantum information processing and quantum simulation. Selective and rapid loading of a specific isotope lays the critical foundation for such purpose particularly when scaling up the system size. Here we demonstrate a new method for rapid isotope-selective loading of 137Ba+^{137}\mathrm{Ba}^{+}137Ba+ or 135Ba+^{135}\mathrm{Ba}^{+}135Ba+, two types of promising ion qubits, from naturally abundant source using a three-step, ultraviolet-free photoionization scheme. Neutral atoms are selected on the narrow 791 nm 6s2 1S0→6s6p 3P1o6s^2\,{}^1S_0\rightarrow6s6p\,{}^3P_1^o6s21S0​→6s6p3P1o​ transition, resonantly transferred at 554 nm to 6s6d 3D16s6d\,{}^3D_16s6d3D1​, and ionized using an existing 532 nm Raman beam. A spectral-overlap analysis based on isotope and hyperfine shifts shows relayed selectivity that the second step can further suppress undesired-isotope excitation and no contaminant ion is detected during our entire experiment. Besides, the resonant drive of the second step excitation yields a prominent loading rate of the selected species. This strategy using multi-step excitations to establish relayed selectivity can be extended to high-purity loading of other species of ions.
誤り耐性超伝導量子コンピュータの実現には 100 万を超える量子ビットが必要とされており、それに伴う配線数の増大も空間の制約や熱流入の増大の観点から解決すべき課題となっている。マイクロ波配線を広帯域かつ低熱流入の光ファイバに変えることで配線数の劇的な削減が期待されているが、それには高効率かつ低ノイズ、超低消費電力の量子トランスデューサが必要となる。ただし、これらの要求性能を実用に十分なレベルで両立させたシステムは未だ開発途上である。我々のグループでは、オプトメカニカル共振器中のダイヤモンド色中心と単一光子の相互作用を利用した超低消費電力量子トランスデューサの実現を目指し開発を進めている。高変換効率の達成には、空間受光系と比較して光子収集効率が大幅に向上する光導波路を介した色中心へのアクセスが不可欠である。さらに、超伝導量子ビットのチップ間を高速に接続して大規模な誤り訂正符号を実現するためには、多数のトランスデューサを並列動作させる必要があり、集積可能な構成が求められる。本研究ではトランスデューサに必須の要素である、光導波路チップ上へのダイヤモンドオプトメカニカル結晶の配置、その冷凍機温度(4 K)での動作実証、更にパーセル効果を介したオプトメカニカル結晶と色中心との光学結合の観測を行った。本成果は、ダイヤモンドを用いたマイクロ波-光量子トランスデューサの集積化に向けた重要な技術的進歩である。
Abstract We report a method of creating pure 9Be+ ions by a 2 + 1 resonance-enhanced multiphoton ionization for the ionization potential of 75 192.64(6) cm−1 (133 nm). The efficient generation of 9Be+ ions has been realized in a segmented linear ion trap. The average loading rates with a 10 ns, 1 mJ laser at 310 nm and 306 nm are 3.8 and 1.3 ions per pulse, respectively. This method has the advantage of reducing the electron contamination to the ion trap electrodes greatly. It also reduces the requirement of single-photon energy while satisfying the need for ionization probability and can be applied to other atoms with high ionization thresholds.