Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Izmeritel`naya Tekhnika

A source of slow atoms based on a conical magneto-optical trap

E. S. Aleinikova, D. S. Kupalov, E.V. Ivanchenko

Published Mar 14, 2026• 0 citations
Publisher

Abstract

Currently, the field of quantum frequency standards based on cold atoms is actively developing. Сold atoms underlie the creation of such quantum gravimetric sensors as atomic gravimeters, atomic gradiometers and atomic gyroscopes. One of the key elements of these sensors is the source of cold atoms, which must provide a sufficient flow of cooled atoms. This paper presents the development of a compact source of Rb87 atoms based on a conical magnetooptical trap, which significantly simplifies the optical scheme by replacing the multipath system with a single conical reflector. The developed compact source is used in fountain-type frequency standards. The scheme, principle of operation, design features and experimental characteristics of a source of slow atoms are given. The results of a study of the operating parameters of a source of slow atoms based on a conical magneto-optical trap and the characteristics of its output atomic beam are presented: the estimated number of trapped atoms in the conical region of the trap, the average atomic flow velocity, and the dependence of the characteristics of the output atomic beam on the operating parameters of the trap. These characteristics demonstrate the possibility of using a conical magneto-optical trap as a source of slow atoms in modern fountain-type frequency standards and other atomic sensors.

DOI
10.32446/0368-1025it.2026-1-80-88

Related papers

Investigation of Conical Magneto-optical Trap as a Source of Slow Atoms

E. S. Aleinikova, E.V. Ivanchenko, D. S. Kupalov +1 more

SummaryOne of the key elements of atomic sensors is a cold-atom source. It should be relatively simple, controllable, robust and compact. Conical magneto-optical trap (MOT) can become a useful tool for such devices as an atomic fountain, a gravimeter. We have developed and investigated the conical magneto-optical trap as a source of slow atoms on the rubidium fountain.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•1 citation

Evaluation the Number of Atoms in Conical Magneto-Optical Trap

E.S. Aleinikova, E.V. Ivanchenko, D. S. Kupalov

Compact and robust magneto-optical trap (MOT) with simple design has obvious advantage in the development of atomic sensors. One of the key elements of atomic fountains is a cold-atom source. We have developed and investigated the conical magneto-optical trap as a source of slow atoms.

European Frequency and Time Forum•Jun 25, 2024•0 citations

A novel simplified two-dimensional magneto-optical trap as an intense source of slow cesium atoms

N. Castagna, Jocelyne Guéna, Mark D. Plimmer +1 more

We describe the design and performance of a slow atom source based on a 2D magneto-optical trap (MOT) that uses an innovative simple optical configuration. Metal-coated retro-reflecting prisms replace mirrors and quarter-wave plates so the optical power of the cooling laser beam is recycled. This source has been characterised for three different configurations: with and without transverse magnetic field gradient, and with a pusher beam to obtain a 2D+-MOT. The longitudinal velocity is of the order of 25 m·s−1, with a transverse velocity spread ≤1 m·s−1, while the typical atomic flux density obtained is up to 1.3×1014 at ·s−1·m−2 for a cesium vapour pressure of ~4×10−8 mbar in the source. We use this slow atom beam, instead of cesium vapour, to load a 3D moving optical molasses that feeds a continuous cold atom fountain. We obtain a gain of a factor ~20 in the atomic flux launched by the fountain.

The European Physical Journal Applied Physics•Apr 1, 2006•26 citations

Single-beam magneto-optical trap in back-to-back pyramidal and conical mirrors

Timothy H. Nguyen, Mariam Mchedlidze, Guanghui Su +3 more

A three-dimensional magneto-optical trap (MOT), acting as an efficient method for producing cold atoms from room-temperature atomic vapor, has been widely used to develop atomic sensors. Various compact MOTs using a single laser beam have been reported, simplifying apparatuses and leading to miniaturized devices. Here, we propose single-beam MOTs based on back-to-back pyramidal and conical mirrors. In such back-to-back mirrors, a MOT trapping volume is formed by an incident laser beam, a retroreflected beam, and multiple reflections from the mirror surfaces. We present the design of back-to-back mirrors and a series of compact MOT configurations, with the potential of increasing access to the MOT and simultaneously creating multiple MOTs. We demonstrate a MOT in a back-to-back conical mirror, loading \ensuremath{\sim}1 \ifmmode\times\else\texttimes\fi{} ${10}^{7}$ ${}^{87}\mathrm{Rb}$ atoms from background vapor and cooling the atoms to \ensuremath{\sim}7 \textmu{}K using polarization gradients. Single-beam MOTs based on back-to-back mirrors contribute to building compact and scalable cold-atom-based sensors.

arXiv:2507.07925•Physical Review Applied•Sep 29, 2025•5 citations

A compact, high-flux source of cold atoms

Sean Ravenhall

The ongoing drive to transfer quantum technologies from research laboratories to practical, portable devices requires the development of multiple key enabling technologies. The field of cold atoms, which includes high-precision metrology and quantum simulation, has various real-world applications including time-keeping and navigation. A crucial component in these systems is a cold-atom source that generates a flux of low-velocity atoms suitable for subsequent capture. A large flux enables fast repetition rates, high duty cycles, long measurement times, and resistance to long-term performance degradation with a good signal-to-noise ratio, all of which are essential to produce cold-atom devices and technologies that are capable of out-performing the classical alternatives. This thesis presents the design, fabrication and characterisation of a novel cold-atom source using a compact pyramidal magneto-optical trap (MOT) with a unique adjustable-aperture mechanism. This allowed an investigation of the dependence of the flux characteristics on the aperture size, a parameter space that has not previously been explored. The measurements showed a strong dependence of the flux on the aperture size, with a negligible flux below 0.4mm, then an approximately linear increase up to 1.0mm, at which point the relationship showed possible signs of saturation. Using 87Rb, a flux of 1.18×1010 atoms/s was produced using a 1.27mm aperture, for which the mean velocity of the atoms was 21.6(3) m/s with a FWHM of 11.2(2) m/s, and the FWHM divergence of the beam was 86(2) mrad. This is the highest recorded flux from a pyramid or 2D+-MOT source, and amongst the highest reported fluxes from any MOT sources, and avenues for improvement still remain. This work fulfils the aim of demonstrating a compact and robust cold-atom source generating a high flux of laser-cooled atoms for real-world quantum technology applications.

•Jan 1, 2018•1 citation

Realization of the Compact Magneto-Optical Trap Based on Single Laser with Frequency Modulation

Shuning Bao, Bin Wu, Pengfei Cao +9 more

In cold atom physics, the complexity of traditional magneto-optical trap system limits the use of their associated instruments for field applications in atomic physics, such as gravity mapping, space navigation and deep space exploration. This study introduces a novel compact MOT design that addresses these issues by simplifying the structure and reducing the size. The height of the unit is 0.7 m, the volume is 6.3×10−2m3 and the mass is 11.32 kg. The new design utilizes a single laser to generate the two different frequencies needed for laser cooling by internally splitting the beam, shifting the frequency and then combining them, effectively controlling both the cooling and repumping beams. The compact vacuum chamber optical path, in conjunction with the magnetic field, facilitates the capture of 87Rb atoms in an ultra-high vacuum environment. Experimental results demonstrate an atom loading rate of up to 1.79×10787Rb atoms per second, confirming the system’s effectiveness in capturing and cooling 87Rb atoms. This design provides a flexible and portable solution, offering valuable insights for the advancement of compact MOT and its applications in cold atom physics.

Photonics•Jan 23, 2025•0 citations
Currently, the field of quantum frequency standards based on cold atoms is actively developing. Сold atoms underlie the creation of such quantum gravimetric sensors as atomic gravimeters, atomic gradiometers and atomic gyroscopes. One of the key elements of these sensors is the source of cold atoms, which must provide a sufficient flow of cooled atoms. This paper presents the development of a compact source of Rb87 atoms based on a conical magnetooptical trap, which significantly simplifies the optical scheme by replacing the multipath system with a single conical reflector. The developed compact source is used in fountain-type frequency standards. The scheme, principle of operation, design features and experimental characteristics of a source of slow atoms are given. The results of a study of the operating parameters of a source of slow atoms based on a conical magneto-optical trap and the characteristics of its output atomic beam are presented: the estimated number of trapped atoms in the conical region of the trap, the average atomic flow velocity, and the dependence of the characteristics of the output atomic beam on the operating parameters of the trap. These characteristics demonstrate the possibility of using a conical magneto-optical trap as a source of slow atoms in modern fountain-type frequency standards and other atomic sensors.
We describe the design and performance of a slow atom source based on a 2D magneto-optical trap (MOT) that uses an innovative simple optical configuration. Metal-coated retro-reflecting prisms replace mirrors and quarter-wave plates so the optical power of the cooling laser beam is recycled. This source has been characterised for three different configurations: with and without transverse magnetic field gradient, and with a pusher beam to obtain a 2D+-MOT. The longitudinal velocity is of the order of 25 m·s−1, with a transverse velocity spread ≤1 m·s−1, while the typical atomic flux density obtained is up to 1.3×1014 at ·s−1·m−2 for a cesium vapour pressure of ~4×10−8 mbar in the source. We use this slow atom beam, instead of cesium vapour, to load a 3D moving optical molasses that feeds a continuous cold atom fountain. We obtain a gain of a factor ~20 in the atomic flux launched by the fountain.
A three-dimensional magneto-optical trap (MOT), acting as an efficient method for producing cold atoms from room-temperature atomic vapor, has been widely used to develop atomic sensors. Various compact MOTs using a single laser beam have been reported, simplifying apparatuses and leading to miniaturized devices. Here, we propose single-beam MOTs based on back-to-back pyramidal and conical mirrors. In such back-to-back mirrors, a MOT trapping volume is formed by an incident laser beam, a retroreflected beam, and multiple reflections from the mirror surfaces. We present the design of back-to-back mirrors and a series of compact MOT configurations, with the potential of increasing access to the MOT and simultaneously creating multiple MOTs. We demonstrate a MOT in a back-to-back conical mirror, loading \ensuremath{\sim}1 \ifmmode\times\else\texttimes\fi{} 107{10}^{7}107 87Rb{}^{87}\mathrm{Rb}87Rb atoms from background vapor and cooling the atoms to \ensuremath{\sim}7 \textmu{}K using polarization gradients. Single-beam MOTs based on back-to-back mirrors contribute to building compact and scalable cold-atom-based sensors.
The ongoing drive to transfer quantum technologies from research laboratories to practical, portable devices requires the development of multiple key enabling technologies. The field of cold atoms, which includes high-precision metrology and quantum simulation, has various real-world applications including time-keeping and navigation. A crucial component in these systems is a cold-atom source that generates a flux of low-velocity atoms suitable for subsequent capture. A large flux enables fast repetition rates, high duty cycles, long measurement times, and resistance to long-term performance degradation with a good signal-to-noise ratio, all of which are essential to produce cold-atom devices and technologies that are capable of out-performing the classical alternatives. This thesis presents the design, fabrication and characterisation of a novel cold-atom source using a compact pyramidal magneto-optical trap (MOT) with a unique adjustable-aperture mechanism. This allowed an investigation of the dependence of the flux characteristics on the aperture size, a parameter space that has not previously been explored. The measurements showed a strong dependence of the flux on the aperture size, with a negligible flux below 0.4mm, then an approximately linear increase up to 1.0mm, at which point the relationship showed possible signs of saturation. Using 87Rb, a flux of 1.18×1010 atoms/s was produced using a 1.27mm aperture, for which the mean velocity of the atoms was 21.6(3) m/s with a FWHM of 11.2(2) m/s, and the FWHM divergence of the beam was 86(2) mrad. This is the highest recorded flux from a pyramid or 2D+-MOT source, and amongst the highest reported fluxes from any MOT sources, and avenues for improvement still remain. This work fulfils the aim of demonstrating a compact and robust cold-atom source generating a high flux of laser-cooled atoms for real-world quantum technology applications.
In cold atom physics, the complexity of traditional magneto-optical trap system limits the use of their associated instruments for field applications in atomic physics, such as gravity mapping, space navigation and deep space exploration. This study introduces a novel compact MOT design that addresses these issues by simplifying the structure and reducing the size. The height of the unit is 0.7 m, the volume is 6.3×10−2m3 and the mass is 11.32 kg. The new design utilizes a single laser to generate the two different frequencies needed for laser cooling by internally splitting the beam, shifting the frequency and then combining them, effectively controlling both the cooling and repumping beams. The compact vacuum chamber optical path, in conjunction with the magnetic field, facilitates the capture of 87Rb atoms in an ultra-high vacuum environment. Experimental results demonstrate an atom loading rate of up to 1.79×10787Rb atoms per second, confirming the system’s effectiveness in capturing and cooling 87Rb atoms. This design provides a flexible and portable solution, offering valuable insights for the advancement of compact MOT and its applications in cold atom physics.