Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Laser ablation of calcium atoms for laser cooling experiment

Jakub Grim

Published Jan 1, 2018• 0 citations
OpenAlex

Abstract

Our work describes two most common methods of generating neutral atoms needed for experiments with trapped and cooled ions. The easiest but not most effective way of the neutral atoms generating is to use a heated oven. A better method allowing a fine control of generating atoms is to use a pulsed laser ablation. A vacuum chamber with Ca atoms source and necessary optics was assembled. Detection of generated particles was achieved by laser-induced fluorescence and sensitive camera. The paper consists of measurement of both method of generating the atoms.

Related papers

Laser ablation and two-step photo-ionization for the generation of 40 Ca +

H Shao, Mengting Wang, Mengyan Zeng +2 more

In this paper, we present a detailed method for rapidly and effectively loading a single 40 Ca + ion into a miniature linear Paul trap. Calcium atoms are generated by laser ablation, and the single ion is loaded and specific isotopes are selected by a two-step photo-ionization method. Compared to the traditional photo-ionization method in which atoms are typically emitted from a resistively heated oven, the advantages of laser ablation are that it can be precisely controlled, it can effectively avoid the problem of fluxed calcium deposition on the trap electrodes, and it restricts the generation of dark ions, which can influence atomic-precision spectroscopy measurements. With its short loading time, it is possible to load an ion in few seconds with the appropriate parameters. The technique of laser ablation has been applied to generate several species of atoms and ions at present, it will potentially benefit in the studies of optical frequency standards, quantum simulation and quantum information processing in an ultra-high vacuum condition and cryogenic system.

Journal of Physics Communications•Jul 5, 2018•25 citations

Experimental techniques for cold chemistry and molecular spectroscopy in an ion trap

Kevin Sheridan

A range of experimental techniques for application in reaction studies between ionic and neutral atoms/molecules and high resolution spectroscopy experiments with sympathetically cooled molecular ions are presented. A novel ion trap loading scheme using the photo-ionisation of atoms generated by the pulsed laser ablation of a solid calcium target has been characterised. We have identified the range of ablation laser fluences that must be used in order to produce a flux of neutral calcium atoms, which is a prerequisite for isotope selective ion trap loading. Calcium ions are trapped and laser cooled in a linear radio-frequency ion trap. We have developed a spectroscopy scheme that allows the entire fluorescence spectrum of trapped ions to be rapidly collected with high precision while maintaining a low ion temperature and good ion localisation throughout interrogation. The scheme has been demonstrated by measuring the saturation intensity of the calcium ion 4S1/2?4P1/2 transition. We have developed a novel scheme to measure the secular motion of trapped ions and demonstrated the application of the technique to ion-neutral collision reaction experiments. Employing pulsed excitation and Doppler velocimetry, we have measured the centre-of-mass mode frequency of single ions as well as large ion crystals with a frequency precision better than 2x10-3 within an interrogation time on the order of seconds. This method has been used to measure the mass of ions and observe charge exchange collisions between trapped calcium isotopes. In particular, we have measured the 44Ca++40Ca!40Ca++44Ca reaction cross section and demonstrated the single-event resolution of the technique. Finally, we have developed a novel all-optical broadband scheme for exciting, amplifying and measuring the secular motion of ions in the trap. Oscillation induced by optical excitation has been coherently amplified to control and measure the ion's secular motion. Requiring only a single interrogation laser, the ion's oscillation amplitude can be precisely controlled. The application of this technique to non-destructive spectroscopy of trapped molecular ions is discussed.

•Oct 3, 2013•0 citations

A comparison of calcium sources for ion-trap loading via laser ablation

D. S. Smith, Silpa Muralidharan, Roland Hablützel +6 more

Trapped-ion technology is a leading approach for scalable quantum computing. A key element of ion trapping is reliable loading of atomic sources into the trap. While thermal atomic ovens have traditionally been used for this purpose, laser ablation has emerged as a viable alternative in recent years, offering the advantages of faster and more localized loading with lower heat dissipation. Calcium is a well-established ion for qubit applications. Here we examine a range of calcium sources for ablation and provide a comprehensive analysis of each. We consider factors such as ease of use, temperature and yield of the ablation plume, and the lifetime of ablation spots. For each target, we estimate the number of trappable atoms per ablation pulse for a typical surface and 3D ion trap.

arXiv:2503.10329•Applied Physics B•Jul 21, 2025•6 citations

Laser Cooling of Ca+ Ions and Observation of Collision Effects

Shinji Urabe, Kazuhiro Hayasaka, Masayoshi Watanabe +2 more

This paper describes our recent experimental results on trapping and laser cooling of Ca+ ions. The measurement of the characteristics of laser-cooled Ca+ ions in an rf quadrupole ion trap, such as the fluorescence line shape and phase transition, is described. Observation of two types of collision-induced “quantum jumps” of a Ca+ ion in a background gas of H2 or air is also described. Since the rate of the collision-induced jumps is very high for Ca+, it is necessary to achieve an extremely high vacuum condition for frequency standard applications.

Japanese Journal of Applied Physics•Mar 1, 1994•8 citations

Sympathetic cooling and detection of a hot trapped ion by a cold one

M Guggemos, D. Heinrich, O. A. Herrera-Sancho +2 more

We investigate the dynamics of an ion sympathetically cooled by another laser-cooled ion or small ion crystal. To this end, we develop simple models of the cooling dynamics in the limit of weak Coulomb interactions. Experimentally, we create a two-ion crystal of Ca + and Al + by photo-ionization of neutral atoms produced by laser ablation. We characterize the velocity distribution of the laser-ablated atoms crossing the trap by time-resolved fluorescence spectroscopy. We observe neutral atom velocities much higher than the ones of thermally heated samples and find as a consequence long sympathethic cooling times before crystallization occurs. Our key result is a new technique for detecting the loading of an initially hot ion with energy in the eV range by monitoring the motional state of a Doppler-cooled ion already present in the trap. This technique not only detects the ion but also provides information about the dynamics of the sympathetic cooling process.

arXiv:1507.07761•New Journal of Physics•Sep 30, 2015•41 citations

The setup for laser cooling and trapping of calcium atoms

E V Vilshanskaya, Sergey A. Saakyan, Vladimir A. Sautenkov +1 more

We have assembled the experimental setup for laser cooling and trapping of calcium atoms in a magneto-optical trap. As a part of this setup on air-cooled Zeeman slower for calcium atomic beam was developed. By using the atomic beam we recorded the resonance of fluorescence. The spectral width of the resonance 58.6 MHz is comparable with the natural width of cooling transition 4 s 21 S 0 −4 s 4 p 1 P 1 .

Journal of Physics Conference Series•Jan 1, 2019•1 citation
Our work describes two most common methods of generating neutral atoms needed for experiments with trapped and cooled ions. The easiest but not most effective way of the neutral atoms generating is to use a heated oven. A better method allowing a fine control of generating atoms is to use a pulsed laser ablation. A vacuum chamber with Ca atoms source and necessary optics was assembled. Detection of generated particles was achieved by laser-induced fluorescence and sensitive camera. The paper consists of measurement of both method of generating the atoms.
In this paper, we present a detailed method for rapidly and effectively loading a single 40 Ca + ion into a miniature linear Paul trap. Calcium atoms are generated by laser ablation, and the single ion is loaded and specific isotopes are selected by a two-step photo-ionization method. Compared to the traditional photo-ionization method in which atoms are typically emitted from a resistively heated oven, the advantages of laser ablation are that it can be precisely controlled, it can effectively avoid the problem of fluxed calcium deposition on the trap electrodes, and it restricts the generation of dark ions, which can influence atomic-precision spectroscopy measurements. With its short loading time, it is possible to load an ion in few seconds with the appropriate parameters. The technique of laser ablation has been applied to generate several species of atoms and ions at present, it will potentially benefit in the studies of optical frequency standards, quantum simulation and quantum information processing in an ultra-high vacuum condition and cryogenic system.
A range of experimental techniques for application in reaction studies between ionic and neutral atoms/molecules and high resolution spectroscopy experiments with sympathetically cooled molecular ions are presented. A novel ion trap loading scheme using the photo-ionisation of atoms generated by the pulsed laser ablation of a solid calcium target has been characterised. We have identified the range of ablation laser fluences that must be used in order to produce a flux of neutral calcium atoms, which is a prerequisite for isotope selective ion trap loading. Calcium ions are trapped and laser cooled in a linear radio-frequency ion trap. We have developed a spectroscopy scheme that allows the entire fluorescence spectrum of trapped ions to be rapidly collected with high precision while maintaining a low ion temperature and good ion localisation throughout interrogation. The scheme has been demonstrated by measuring the saturation intensity of the calcium ion 4S1/2?4P1/2 transition. We have developed a novel scheme to measure the secular motion of trapped ions and demonstrated the application of the technique to ion-neutral collision reaction experiments. Employing pulsed excitation and Doppler velocimetry, we have measured the centre-of-mass mode frequency of single ions as well as large ion crystals with a frequency precision better than 2x10-3 within an interrogation time on the order of seconds. This method has been used to measure the mass of ions and observe charge exchange collisions between trapped calcium isotopes. In particular, we have measured the 44Ca++40Ca!40Ca++44Ca reaction cross section and demonstrated the single-event resolution of the technique. Finally, we have developed a novel all-optical broadband scheme for exciting, amplifying and measuring the secular motion of ions in the trap. Oscillation induced by optical excitation has been coherently amplified to control and measure the ion's secular motion. Requiring only a single interrogation laser, the ion's oscillation amplitude can be precisely controlled. The application of this technique to non-destructive spectroscopy of trapped molecular ions is discussed.
Trapped-ion technology is a leading approach for scalable quantum computing. A key element of ion trapping is reliable loading of atomic sources into the trap. While thermal atomic ovens have traditionally been used for this purpose, laser ablation has emerged as a viable alternative in recent years, offering the advantages of faster and more localized loading with lower heat dissipation. Calcium is a well-established ion for qubit applications. Here we examine a range of calcium sources for ablation and provide a comprehensive analysis of each. We consider factors such as ease of use, temperature and yield of the ablation plume, and the lifetime of ablation spots. For each target, we estimate the number of trappable atoms per ablation pulse for a typical surface and 3D ion trap.
This paper describes our recent experimental results on trapping and laser cooling of Ca+ ions. The measurement of the characteristics of laser-cooled Ca+ ions in an rf quadrupole ion trap, such as the fluorescence line shape and phase transition, is described. Observation of two types of collision-induced “quantum jumps” of a Ca+ ion in a background gas of H2 or air is also described. Since the rate of the collision-induced jumps is very high for Ca+, it is necessary to achieve an extremely high vacuum condition for frequency standard applications.
We investigate the dynamics of an ion sympathetically cooled by another laser-cooled ion or small ion crystal. To this end, we develop simple models of the cooling dynamics in the limit of weak Coulomb interactions. Experimentally, we create a two-ion crystal of Ca + and Al + by photo-ionization of neutral atoms produced by laser ablation. We characterize the velocity distribution of the laser-ablated atoms crossing the trap by time-resolved fluorescence spectroscopy. We observe neutral atom velocities much higher than the ones of thermally heated samples and find as a consequence long sympathethic cooling times before crystallization occurs. Our key result is a new technique for detecting the loading of an initially hot ion with energy in the eV range by monitoring the motional state of a Doppler-cooled ion already present in the trap. This technique not only detects the ion but also provides information about the dynamics of the sympathetic cooling process.