Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Access

Reduced-Complexity Belief Propagation Decoding for LDPC Codes

Heping Wan, Joonyoung Cho, Min Jang, Jianzhong Charlie Zhang

Published Jan 1, 2026• 0 citations
Publisher

Abstract

Two methods are proposed to reduce the complexity of the belief propagation (BP) decoding for low-density parity-check (LDPC) codes, with the focus on the layered decoding for quasi-cyclic LDPC (QC-LDPC) codes. The two methods can be separately incorporated into the layered decoding procedures and combined seamlessly to provide the two-fold complexity reduction. In the first method, the message updates regarding a subset of variable nodes are omitted. To construct the subset, the most reliable bit-level channels, derived fromM-ary input channels, are identified. Then, we select the variable nodes with initial log-likelihood ratios (LLRs) exceeding a threshold among the ones assigned to the most reliable bit-level channels to form the subset. The threshold is designed and adjusted based on characteristics of the most reliable bit-level channels. Our numerical results demonstrate that the first method significantly reduces the complexity with negligibly impacting the error-correcting performance. In the second method, each layer of base graphs of QC-LDPC codes uses either sum-product algorithm (SPA) or min-sum algorithm (MSA) to update LLRs. A degree-based algorithm is presented to determine the layers employing either SPA or MSA. We compare with two intuitive methods: 1) applying SPA to randomly selected layers and MSA to the remaining layers, and 2) applying SPA to the core layers of 5G NR LDPC codes and MSA to the remaining layers. According to the numerical results, the degree-based algorithm maximally reduces the complexity while maintaining the same performance. To evaluate the joint method, the first method is applied on top of the second method. Further complexity reduction is achieved without degrading the performance of the second method.

DOI
10.1109/access.2026.3673136

Related papers

Reduced-Complexity Decoding of LDPC Codes

Reduced-Complexity Decoding of LDPC Codes Various log-likelihood-ratio-based belief-propagation (LLR- BP) decoding algorithms and their reduced-complexity derivatives for low-density parity-check (LDPC) codes are presented. Numerically accurate representations of the check-node update computation used in LLR-BP decoding are described. Furthermore, approximate representation of the decoding computations are shown to achieve a reduction in complexity, by simplifying the check-node update or symbol-node update, or both. In particular, two main approaches for simplified check-node updates are presented that are based on the so-called min-sum approximation coupled with either a normalization term or an additive offset term. Density evolution is used to analyze the performance of these decoding algorithms, to determine the optimum values of the key parameters, and to evaluate finite quantization effects. Simulation results show that these reduced-complexity decoding algorithms for LDPC codes achieve a performance very close to that of the BP algorithm. The unified treatment of decoding techniques for LDPC codes presented here provides flexibility in selecting the appropriate scheme from a performance, latency, computational complexity, and memory-requirement perspective.

IEEE Transactions on Communications•Jul 1, 2005•32 citations

Reduced-Complexity Decoding of LDPC Codes

J. Chen, Ajay Dholakia, Evangelos S. Eleftheriou +2 more

Various log-likelihood-ratio-based belief-propagation (LLR-BP) decoding algorithms and their reduced-complexity derivatives for low-density parity-check (LDPC) codes are presented. Numerically accurate representations of the check-node update computation used in LLR-BP decoding are described. Furthermore, approximate representations of the decoding computations are shown to achieve a reduction in complexity by simplifying the check-node update, or symbol-node update, or both. In particular, two main approaches for simplified check-node updates are presented that are based on the so-called min-sum approximation coupled with either a normalization term or an additive offset term. Density evolution is used to analyze the performance of these decoding algorithms, to determine the optimum values of the key parameters, and to evaluate finite quantization effects. Simulation results show that these reduced-complexity decoding algorithms for LDPC codes achieve a performance very close to that of the BP algorithm. The unified treatment of decoding techniques for LDPC codes presented here provides flexibility in selecting the appropriate scheme from performance, latency, computational-complexity, and memory-requirement perspectives.

IEEE Transactions on Communications•Aug 1, 2005•964 citations

Low-Complexity Layered Decoding for LDPC Codes

Heping Wan, Joonyoung Cho, Min Jang +1 more

This paper presents methods to reduce the complexity of the layered decoding for LDPC codes with negligibly impacting the error-correcting performance. We accomplish this by deactivating variable nodes. The LLR updates associated with the deactivated variable nodes are skipped. To determine which variable nodes should be deactivated, the most reliable bit-level channels, derived from the M−ary input channel, are identified. Then, from the variable nodes assigned to the most reliable bit-level channels, we select those with initial LLRs above a threshold as the deactivated variable nodes. We establish an analytical relationship between the threshold and a desired error probability. The threshold can be adjusted accordingly by specifying the desired error probability. The standard 5G LDPC codes are simulated. By setting the desired error probability to 10−3, more than 20% of the variable nodes are deactivated while the error-correcting performance is preserved.

IEEE Globecom Workshops (GC Wkshps)•Dec 8, 2024•0 citations

A Low Complexity Decoding Algorithm Design Based on Quasi-Cyclic LDPC Codes

Cai Honghao, Yingkun Yang, Yi Qu

Entering the 5G era, the hardware design of low-density parity-check (LDPC) codes under the new standard has increasingly higher requirements on throughput. According to the geometric characteristics of the check matrices of the quasi-cyclicQC) LDCP codes under the CCSDS standard, this paper designs a layered dynamic normalized minimum sum algorithm(LDNMSA) under the pre-termination decoding based on de-layering scheme. The check matrix structure of this code is easy for hardware design and the storage resource consumption is low. The approximate replacement of the minimum sum algorithm(MSA) reduces the computational complexity of the check node update process. The determination of correction factors and inter-layer deletion thresholds through computer simulation improves the decoding performance and the speed of a single iteration, and adopt the layered scheduling scheme with optimized update order reduces the number of iterations required for decoding. Experimental results show that when the bit error rate(BER) is 10-5, the designed algorithm has a gain of approximately 0.5 dB compared to the MSA. The speed and calculation amounts to a single iteration are much lower than the log-likelihood-ratio(LLR) belief propagation(BP) algorithm and the performance is only less than 0.1dB.

International Conference on Computing, Electronics & Communications Engineering (iCCECE)•Aug 17, 2020•2 citations

Ordered Layered Belief Propagation with Partial Updates for LDPC Decoding

Hyojeong Choi, Gangsan Kim, Hong-Yeop Song

We propose a low-complexity LDPC decoding strategy by modifying the conventional layered belief propagation scheduling. The proposed strategy prioritizes check nodes according to their residual sums and updates only a subset with larger values in each iteration. We call this approach ordered layered belief propagation (OLBP) with partial updates. This method effectively reduces the number of message updates per iteration compared with conventional schemes, while maintaining comparable error-correction performance. Simulations on the GPS L1C LDPC code using the Sum-Product (SP), Normalized Min-Sum (NMS), and Offset Min-Sum (OMS) algorithms show that OLBP achieves nearly identical FER performance with only 70% of the message updates at 10 iterations, and 50% at 20 iterations, demonstrating substantial complexity reduction without noticeable performance loss.

한국통신학회논문지•Sep 21, 2026•0 citations

A Second Minimum Approximation Method for Layered Min-Sum Decoding of QC-LDPC Codes

Zijian Qin, Yangcan Zhou, Zhongfeng Wang

Low-density parity-check (LDPC) codes have attracted tremendous attention for their excellent error-correction performance and inherent fitness for high-parallelism implementation. With great complexity reduction and friendly for hardware implementation, the min-sum (MS) decoding algorithm for LDPC codes gains widespread applications in practical. In the MS decoding algorithm, finding the first two minima among input variable-to-check messages is the most complex part. To further reduce the complexity of the MS decoding algorithm, an efficient single-minimum (single-min) based layered MS decoding for quasi-cyclic LDPC (QC-LDPC) codes is proposed in this paper. It is found that statistically the difference between the first minimum and second minimum increases as the decoding becomes more convergent. Accordingly, in the proposed single-min scheme, the second minimum is approximately derived based on the first minimum and an index indicating the convergence degree. Besides, some other metrics that are easily obtained are used to refine the second minimum. Simulation results show that the proposed method can significantly improve the error-correction performance and lower the average number of iterations, compared with the state-of-the-art single-min based MS decoding algorithms.

Information Communication Technologies Conference (ICTC)•May 17, 2023•1 citation
Two methods are proposed to reduce the complexity of the belief propagation (BP) decoding for low-density parity-check (LDPC) codes, with the focus on the layered decoding for quasi-cyclic LDPC (QC-LDPC) codes. The two methods can be separately incorporated into the layered decoding procedures and combined seamlessly to provide the two-fold complexity reduction. In the first method, the message updates regarding a subset of variable nodes are omitted. To construct the subset, the most reliable bit-level channels, derived fromM-ary input channels, are identified. Then, we select the variable nodes with initial log-likelihood ratios (LLRs) exceeding a threshold among the ones assigned to the most reliable bit-level channels to form the subset. The threshold is designed and adjusted based on characteristics of the most reliable bit-level channels. Our numerical results demonstrate that the first method significantly reduces the complexity with negligibly impacting the error-correcting performance. In the second method, each layer of base graphs of QC-LDPC codes uses either sum-product algorithm (SPA) or min-sum algorithm (MSA) to update LLRs. A degree-based algorithm is presented to determine the layers employing either SPA or MSA. We compare with two intuitive methods: 1) applying SPA to randomly selected layers and MSA to the remaining layers, and 2) applying SPA to the core layers of 5G NR LDPC codes and MSA to the remaining layers. According to the numerical results, the degree-based algorithm maximally reduces the complexity while maintaining the same performance. To evaluate the joint method, the first method is applied on top of the second method. Further complexity reduction is achieved without degrading the performance of the second method.
Reduced-Complexity Decoding of LDPC Codes Various log-likelihood-ratio-based belief-propagation (LLR- BP) decoding algorithms and their reduced-complexity derivatives for low-density parity-check (LDPC) codes are presented. Numerically accurate representations of the check-node update computation used in LLR-BP decoding are described. Furthermore, approximate representation of the decoding computations are shown to achieve a reduction in complexity, by simplifying the check-node update or symbol-node update, or both. In particular, two main approaches for simplified check-node updates are presented that are based on the so-called min-sum approximation coupled with either a normalization term or an additive offset term. Density evolution is used to analyze the performance of these decoding algorithms, to determine the optimum values of the key parameters, and to evaluate finite quantization effects. Simulation results show that these reduced-complexity decoding algorithms for LDPC codes achieve a performance very close to that of the BP algorithm. The unified treatment of decoding techniques for LDPC codes presented here provides flexibility in selecting the appropriate scheme from a performance, latency, computational complexity, and memory-requirement perspective.
Various log-likelihood-ratio-based belief-propagation (LLR-BP) decoding algorithms and their reduced-complexity derivatives for low-density parity-check (LDPC) codes are presented. Numerically accurate representations of the check-node update computation used in LLR-BP decoding are described. Furthermore, approximate representations of the decoding computations are shown to achieve a reduction in complexity by simplifying the check-node update, or symbol-node update, or both. In particular, two main approaches for simplified check-node updates are presented that are based on the so-called min-sum approximation coupled with either a normalization term or an additive offset term. Density evolution is used to analyze the performance of these decoding algorithms, to determine the optimum values of the key parameters, and to evaluate finite quantization effects. Simulation results show that these reduced-complexity decoding algorithms for LDPC codes achieve a performance very close to that of the BP algorithm. The unified treatment of decoding techniques for LDPC codes presented here provides flexibility in selecting the appropriate scheme from performance, latency, computational-complexity, and memory-requirement perspectives.
This paper presents methods to reduce the complexity of the layered decoding for LDPC codes with negligibly impacting the error-correcting performance. We accomplish this by deactivating variable nodes. The LLR updates associated with the deactivated variable nodes are skipped. To determine which variable nodes should be deactivated, the most reliable bit-level channels, derived from the M−ary input channel, are identified. Then, from the variable nodes assigned to the most reliable bit-level channels, we select those with initial LLRs above a threshold as the deactivated variable nodes. We establish an analytical relationship between the threshold and a desired error probability. The threshold can be adjusted accordingly by specifying the desired error probability. The standard 5G LDPC codes are simulated. By setting the desired error probability to 10−3, more than 20% of the variable nodes are deactivated while the error-correcting performance is preserved.
Entering the 5G era, the hardware design of low-density parity-check (LDPC) codes under the new standard has increasingly higher requirements on throughput. According to the geometric characteristics of the check matrices of the quasi-cyclicQC) LDCP codes under the CCSDS standard, this paper designs a layered dynamic normalized minimum sum algorithm(LDNMSA) under the pre-termination decoding based on de-layering scheme. The check matrix structure of this code is easy for hardware design and the storage resource consumption is low. The approximate replacement of the minimum sum algorithm(MSA) reduces the computational complexity of the check node update process. The determination of correction factors and inter-layer deletion thresholds through computer simulation improves the decoding performance and the speed of a single iteration, and adopt the layered scheduling scheme with optimized update order reduces the number of iterations required for decoding. Experimental results show that when the bit error rate(BER) is 10-5, the designed algorithm has a gain of approximately 0.5 dB compared to the MSA. The speed and calculation amounts to a single iteration are much lower than the log-likelihood-ratio(LLR) belief propagation(BP) algorithm and the performance is only less than 0.1dB.
We propose a low-complexity LDPC decoding strategy by modifying the conventional layered belief propagation scheduling. The proposed strategy prioritizes check nodes according to their residual sums and updates only a subset with larger values in each iteration. We call this approach ordered layered belief propagation (OLBP) with partial updates. This method effectively reduces the number of message updates per iteration compared with conventional schemes, while maintaining comparable error-correction performance. Simulations on the GPS L1C LDPC code using the Sum-Product (SP), Normalized Min-Sum (NMS), and Offset Min-Sum (OMS) algorithms show that OLBP achieves nearly identical FER performance with only 70% of the message updates at 10 iterations, and 50% at 20 iterations, demonstrating substantial complexity reduction without noticeable performance loss.
Low-density parity-check (LDPC) codes have attracted tremendous attention for their excellent error-correction performance and inherent fitness for high-parallelism implementation. With great complexity reduction and friendly for hardware implementation, the min-sum (MS) decoding algorithm for LDPC codes gains widespread applications in practical. In the MS decoding algorithm, finding the first two minima among input variable-to-check messages is the most complex part. To further reduce the complexity of the MS decoding algorithm, an efficient single-minimum (single-min) based layered MS decoding for quasi-cyclic LDPC (QC-LDPC) codes is proposed in this paper. It is found that statistically the difference between the first minimum and second minimum increases as the decoding becomes more convergent. Accordingly, in the proposed single-min scheme, the second minimum is approximately derived based on the first minimum and an index indicating the convergence degree. Besides, some other metrics that are easily obtained are used to refine the second minimum. Simulation results show that the proposed method can significantly improve the error-correction performance and lower the average number of iterations, compared with the state-of-the-art single-min based MS decoding algorithms.