Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Computing, Communication, and Simulation

Quantum gate design using integrated photonics: a comparative study

Thomas J. G. Mikhail, Mohamed A. Swillam

Published Mar 5, 2026• 0 citations
Publisher

Abstract

In this study, we use qINTERCONNECT to perform a comparative analysis of published Photonic quantum gate designs, including CNOT, Hadamard, SWAP. We introduce real-world fabrication errors via Monte Carlo simulations of key design parameters, and by analyzing the resulting means and standard deviations, we assess the relative robustness and scalability of each design under realistic conditions by comparing each design’s fidelity and probability of success. This comparison highlights key challenges facing practical implementations of quantum gates and informs design strategies for future scalable quantum computing.

DOI
10.1117/12.3079155

Related papers

Comparative Study of Optical Quantum Swap Gates Using qINTERCONNECT

T. J Mikhail, Mohamed A. Swillam

In this study, we delve into optimizing optical quantum swap gate designs, which are crucial in the advancement of quantum computing. Using qINTERCONNECT, we conduct a comparative analysis of swap gate designs, including those based on equivalent circuits like CNOT gates and others utilizing dedicated architectures. Our aim is to compare the balance between operational efficiency and error tolerance in these varying designs, so as to measure their potential for scalability. Through simulations grounded in real-world fabrication parameters, we assess the fidelity and success probabilities of each design approach. Our findings indicate that while equivalent circuit-based designs are traditionally favored in other fields of quantum computing, dedicated swap gate architectures may offer enhanced robustness and scalability in optics. This study provides a comparative understanding of different swap gate designs, elucidating the relative merits and drawbacks of current designs, and offering insights that are relevant for practical applications in quantum computing.

Photonics North (PN)•May 28, 2024•0 citations

Simulating integrated photonic gates using FDTD

Andrei-Emanuel Dragomir, C. Ivan, Radu Ionicioiu

Abstract Quantum technologies, such as quantum communication, quantum sensing, quantum imaging and quantum computation, need a platform which is flexible, miniaturisable and works at room temperature. Integrated photonics is a promising and fast-developing platform. This requires to develop the right tools to design and fabricate arbitrary photonic quantum devices. Here we present an algorithm which, starting from a n -mode transformation U , designs a photonic device that approximates U . Using this method we design integrated photonic devices which implement quantum gates with high fidelity. Apart from quantum computation, future applications include the design of photonic subroutines and embedded quantum devices. These custom-designed photonic chips will be able to implement a given algorithm as a single-block circuit and will be small, robust and fast compared to a fully-programmable processor.

arXiv:2006.02946•Quantum Science and Technology•Aug 28, 2020•1 citation

Engineering integrated photonics for heralded quantum gates

Thomas Meany, Devon N. Biggerstaff, Matthew A. Broome +7 more

Scaling up linear-optics quantum computing will require multi-photon gates which are compact, phase-stable, exhibit excellent quantum interference, and have success heralded by the detection of ancillary photons. We investigate the design, fabrication and characterisation of the optimal known gate scheme which meets these requirements: the Knill controlled-Z gate, implemented in integrated laser-written waveguide arrays. We show device performance to be less sensitive to phase variations in the circuit than to small deviations in the coupler reflectivity, which are expected given the tolerance values of the fabrication method. The mode fidelity is also shown to be less sensitive to reflectivity and phase errors than the process fidelity. Our best device achieves a fidelity of 0.931 ± 0.001 with the ideal 4 × 4 unitary circuit and a process fidelity of 0.680 ± 0.005 with the ideal computational-basis process.

arXiv:1502.03386•Scientific Reports•Jun 10, 2016•32 citations

From NISQ to Scalable Architectures: Challenges and Prospects for Practical Quantum Computing

Kalpana Galappaththi

Quantum computing has progressed from early demonstrations across superconducting, trapped ion, photonic, and spin-based platforms to increasingly integrated systems. However, transitioning from the noisy intermediate-scale quantum (NISQ) era to robust, fault tolerant implementations remain a central challenge. This paper presents a systematic review and synthesis of practical quantum computing, encompassing experimental advances, integrated photonics, error correction breakthroughs, software stack evolution, benchmarking practices, algorithmic readiness, and socio-technical dimensions. We critically assess current limitations and highlight emerging directions, including integrated photonic modules with high fidelity interconnects, real time decoders for surface code logical qubits, and hardware aware compiler strategies. Our analysis is grounded in peer-reviewed experimental data and model-based evaluations. Key findings include demonstrated logical error suppression via increased code distance, scalable photonic module prototypes, and refined resource estimates for cryptanalytic and simulation tasks. This paper concludes with a structured research agenda for 2025–2030, proposing four priority thrusts such as hardware QEC co design, reproducible cross platform benchmarking, modular/distributed architectures, and quantum networking with governance frameworks. This evidence based roadmap aims to align researchers and practitioners toward actionable milestones on the path to practical quantum computing.

International Conference on Advancements in Computing (ICAC)•Dec 9, 2025•0 citations

High‐Fidelity Integrated Quantum Photonic Logic Via Robust Directional Couplers

Yonatan Piasetzky, Khen Cohen, Amit Rotem +4 more

ABSTRACT Scalable quantum information processing with integrated photonics requires quantum logic operations with low error probability and robustness. Directional couplers, the fundamental elements enabling quantum interference and logic operations, are inherently sensitive to fabrication imperfections and environmental fluctuations, leading to increased gate error probabilities. Here, we experimentally demonstrate a passive design strategy that mitigates these errors by exploiting a stationary geometrical configuration in uniform directional couplers, where first‐order variations in the coupling coefficient are intrinsically suppressed. The robust geometry is implemented in a silicon‐on‐insulator photonic chip hosting two‐photon controlled‐NOT (CNOT) quantum gates and its performance is directly compared to a non‐optimized design fabricated under the same process and measurement conditions. Measurements indicate a mean error probability of , lower than the non‐robust implementation value of , without active tuning or footprint increase. The remaining error is dominated by finite photon indistinguishability, with a corrected HOM‐limited error floor of . Monte Carlo simulations incorporating measured fabrication noise are consistent with the observed reduction and with suppression of gate‐level error rates. These results support the use of stationary‐geometry couplers as compact, fabrication‐tolerant building blocks for scalable photonic quantum circuits.

arXiv:2502.20069•Advanced Quantum Technologies•Oct 1, 2026•2 citations

Novel photonic quantum CNOT gates on the silicon chip

Xi‐Feng Ren

This Conference Presentation, “Novel photonic quantum CNOT gates on the silicon chip,” was recorded for the Photonics Asia 2020 Digital Forum.

SPIE Conference on Quantum and Nonlinear Optics•Oct 9, 2020•0 citations
In this study, we use qINTERCONNECT to perform a comparative analysis of published Photonic quantum gate designs, including CNOT, Hadamard, SWAP. We introduce real-world fabrication errors via Monte Carlo simulations of key design parameters, and by analyzing the resulting means and standard deviations, we assess the relative robustness and scalability of each design under realistic conditions by comparing each design’s fidelity and probability of success. This comparison highlights key challenges facing practical implementations of quantum gates and informs design strategies for future scalable quantum computing.
In this study, we delve into optimizing optical quantum swap gate designs, which are crucial in the advancement of quantum computing. Using qINTERCONNECT, we conduct a comparative analysis of swap gate designs, including those based on equivalent circuits like CNOT gates and others utilizing dedicated architectures. Our aim is to compare the balance between operational efficiency and error tolerance in these varying designs, so as to measure their potential for scalability. Through simulations grounded in real-world fabrication parameters, we assess the fidelity and success probabilities of each design approach. Our findings indicate that while equivalent circuit-based designs are traditionally favored in other fields of quantum computing, dedicated swap gate architectures may offer enhanced robustness and scalability in optics. This study provides a comparative understanding of different swap gate designs, elucidating the relative merits and drawbacks of current designs, and offering insights that are relevant for practical applications in quantum computing.
Abstract Quantum technologies, such as quantum communication, quantum sensing, quantum imaging and quantum computation, need a platform which is flexible, miniaturisable and works at room temperature. Integrated photonics is a promising and fast-developing platform. This requires to develop the right tools to design and fabricate arbitrary photonic quantum devices. Here we present an algorithm which, starting from a n -mode transformation U , designs a photonic device that approximates U . Using this method we design integrated photonic devices which implement quantum gates with high fidelity. Apart from quantum computation, future applications include the design of photonic subroutines and embedded quantum devices. These custom-designed photonic chips will be able to implement a given algorithm as a single-block circuit and will be small, robust and fast compared to a fully-programmable processor.
Scaling up linear-optics quantum computing will require multi-photon gates which are compact, phase-stable, exhibit excellent quantum interference, and have success heralded by the detection of ancillary photons. We investigate the design, fabrication and characterisation of the optimal known gate scheme which meets these requirements: the Knill controlled-Z gate, implemented in integrated laser-written waveguide arrays. We show device performance to be less sensitive to phase variations in the circuit than to small deviations in the coupler reflectivity, which are expected given the tolerance values of the fabrication method. The mode fidelity is also shown to be less sensitive to reflectivity and phase errors than the process fidelity. Our best device achieves a fidelity of 0.931 ± 0.001 with the ideal 4 × 4 unitary circuit and a process fidelity of 0.680 ± 0.005 with the ideal computational-basis process.
Quantum computing has progressed from early demonstrations across superconducting, trapped ion, photonic, and spin-based platforms to increasingly integrated systems. However, transitioning from the noisy intermediate-scale quantum (NISQ) era to robust, fault tolerant implementations remain a central challenge. This paper presents a systematic review and synthesis of practical quantum computing, encompassing experimental advances, integrated photonics, error correction breakthroughs, software stack evolution, benchmarking practices, algorithmic readiness, and socio-technical dimensions. We critically assess current limitations and highlight emerging directions, including integrated photonic modules with high fidelity interconnects, real time decoders for surface code logical qubits, and hardware aware compiler strategies. Our analysis is grounded in peer-reviewed experimental data and model-based evaluations. Key findings include demonstrated logical error suppression via increased code distance, scalable photonic module prototypes, and refined resource estimates for cryptanalytic and simulation tasks. This paper concludes with a structured research agenda for 2025–2030, proposing four priority thrusts such as hardware QEC co design, reproducible cross platform benchmarking, modular/distributed architectures, and quantum networking with governance frameworks. This evidence based roadmap aims to align researchers and practitioners toward actionable milestones on the path to practical quantum computing.
ABSTRACT Scalable quantum information processing with integrated photonics requires quantum logic operations with low error probability and robustness. Directional couplers, the fundamental elements enabling quantum interference and logic operations, are inherently sensitive to fabrication imperfections and environmental fluctuations, leading to increased gate error probabilities. Here, we experimentally demonstrate a passive design strategy that mitigates these errors by exploiting a stationary geometrical configuration in uniform directional couplers, where first‐order variations in the coupling coefficient are intrinsically suppressed. The robust geometry is implemented in a silicon‐on‐insulator photonic chip hosting two‐photon controlled‐NOT (CNOT) quantum gates and its performance is directly compared to a non‐optimized design fabricated under the same process and measurement conditions. Measurements indicate a mean error probability of , lower than the non‐robust implementation value of , without active tuning or footprint increase. The remaining error is dominated by finite photon indistinguishability, with a corrected HOM‐limited error floor of . Monte Carlo simulations incorporating measured fabrication noise are consistent with the observed reduction and with suppression of gate‐level error rates. These results support the use of stationary‐geometry couplers as compact, fabrication‐tolerant building blocks for scalable photonic quantum circuits.